🚨 CVE-2026-75575
Rocket.Chat exposes the sendForgotPasswordEmail Meteor method without a DDP rate limit, so an unauthenticated caller may invoke it as often as it likes. The method is reachable over DDP and over the HTTP route POST /api/v1/method.callAnon/sendForgotPasswordEmail, and it triggers a password reset message for any address that matches an account. With no DDPRateLimiter rule registered for it, a caller can drive an unbounded volume of reset mail at a chosen address from the deployment's own mail sender, and can probe addresses at scale: the method answers true for an address with no account and for a successful send, but false when the address belongs to an account that authenticates through an external provider and Accounts_AllowPasswordChangeForOAuthUsers is off, so repeated calls distinguish that class of account. Later versions register a rule permitting ten calls per minute per client address.

🎖@cveNotify

🚨 CVE-2026-78677
GitPython before 3.1.59 omits --separate-git-dir from unsafe_git_clone_options, allowing attackers to create arbitrary git directories outside the intended clone destination. Attackers can pass a separate_git_dir parameter to Repo.clone_from() or Repo.clone() to redirect repository metadata to an attacker-controlled filesystem path, enabling arbitrary directory creation and potential hook execution.

🎖@cveNotify

🚨 CVE-2026-78678
GitPython versions before 3.1.59 contain an incomplete denylist in the unsafe_git_revision_options guard that omits --contents and -S options, allowing attackers to read arbitrary files by passing these options to Repo.blame(). Attackers can supply revision values like --contents=/etc/passwd to leak file contents through the blame result returned to the caller.

🎖@cveNotify

🚨 CVE-2026-78682
NLTK before 3.10.3 contains a server-side request forgery vulnerability in nltk.pathsec.urlopen (and callers nltk.data.load, nltk.downloader.Downloader.index/download) when an HTTP proxy is configured. pathsec.urlopen validates the requested hostname locally, but proxy-handler inheritance disables the safe HTTP/HTTPS handlers so the actual fetch is performed by the proxy against a destination that is never re-validated. An attacker can supply a validated public URL that the proxy forwards to an internal loopback-only service, allowing disclosure of internal HTTP resources, loading of forged downloader indexes, and installation of attacker-chosen package content.

🎖@cveNotify

🚨 CVE-2026-78683
NLTK before 3.10.0 (affected versions <=3.9.4) contains an unsafe pickle deserialization vulnerability in the TransitionParser.parse() method (nltk/parse/transitionparser.py). The method calls pickle_load() with the default restricted=False, routing deserialization through WarningUnpickler, which does not override find_class() and therefore permits arbitrary class resolution. When an application loads an attacker-crafted model file, embedded pickle gadget chains execute arbitrary Python code with the privileges of the user running the application. NLTK provides a RestrictedUnpickler for safe deserialization, but it is not used by production code paths. Fixed in 3.10.0.

🎖@cveNotify

🚨 CVE-2026-75982
The LearnPress plugin for WordPress is vulnerable to unauthorized modification of arbitrary WordPress options in versions up to, and including, 4.4.4 via the learnpress_create_page AJAX action. The LP_Admin_Ajax::create_page() handler only checks the edit_pages capability and a wp_rest nonce (both available to Editors), then reads the field_name parameter from the request without restricting it to a learn_press_* allow-list before passing it as the option key to LP_Helper::create_page(), which calls update_option($key_option, $page_id). This makes it possible for authenticated attackers, with Editor-level access and above, to update arbitrary WordPress options to a positive integer (a newly created page ID), enabling actions such as flipping users_can_register to a truthy value to open public registration, corrupting active_plugins to break the site, or otherwise tampering with site-wide settings normally reserved for administrators.

🎖@cveNotify

🚨 CVE-2026-78685
Medical Practice Management System developed by Le-yan has a Remote Code Execution vulnerability. Unauthenticated remote attackers can execute arbitrary OS commamnds via a crafted HTML page.

🎖@cveNotify

🚨 CVE-2026-75930
The FundEngine – Donation and Crowdfunding Platform plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 1.8.1. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for authenticated attackers, with subscriber-level access and above, to modify arbitrary posts and pages — overwriting title and content, and seizing ownership by supplying an attacker-controlled post_author integer that bypasses wp_kses_post sanitization. The wp_rest nonce required by the handler is trivially obtainable by any logged-in user via /wp-admin/admin-ajax.php?action=rest-nonce and therefore does not constitute an authorization barrier.

🎖@cveNotify

🚨 CVE-2026-13214
The OCPP 1.6 client in subsys/net/lib/ocpp/ocpp_j.c contains a stack buffer overflow in parse_getconfig_msg(). When handling a GetConfiguration request from the central system, the handler copied the attacker-controlled JSON "key" string into the caller's fixed 50-byte stack buffer (skey[CISTR50], declared in subsys/net/lib/ocpp/ocpp.c) using an unbounded strcpy(). The parsed key value points directly into the receive buffer, so its length is bounded only by the message size (CONFIG_OCPP_RECV_BUFFER_SIZE, default 2048).

The GetConfiguration message is delivered over the WebSocket connection that the charge point opens to its configured central system. The reader thread ocpp_wsreader() reads the message into ui->recv_buf and dispatches it to parse_getconfig_msg() via the PDU function table. An attacker who controls the central system endpoint, or a man-in-the-middle on an unencrypted connection, can send a GetConfiguration request whose "key" field exceeds 50 bytes and overflow the reader thread's stack with attacker-chosen bytes.

The consequence is a remotely triggerable stack smash on the OCPP reader thread: at minimum a denial of service, and plausibly remote code execution depending on build-time hardening such as stack canaries and MPU configuration. The fix replaces the strcpy() with a bounded strncpy(key, payload.key[0], CISTR50 - 1) followed by explicit NUL termination, matching the bounded copies already used by the sibling handlers.

🎖@cveNotify

🚨 CVE-2026-13215
The Zephyr ext2 filesystem driver fails to validate the s_log_block_size field of the on-disk superblock when mounting a filesystem. ext2_verify_disk_superblock() in subsys/fs/ext2/ext2_impl.c checks the magic number, revision, inode size and group counts, but never bounds s_log_block_size. On a successful verify, subsys/fs/ext2/ext2_ops.c computes fs->block_size = 1024 << superblock.s_log_block_size from this attacker-controlled uint32_t, so a crafted value either overflows the shift (undefined behaviour) or yields a block size far larger than CONFIG_EXT2_MAX_BLOCK_SIZE.

That block size is then passed to k_mem_slab_init() by ext2_init_blocks_slab() to carve CONFIG_EXT2_MAX_BLOCK_COUNT blocks out of the fixed static buffer __ext2_block_memory_buffer, whose size is CONFIG_EXT2_MAX_BLOCK_COUNT * CONFIG_EXT2_MAX_BLOCK_SIZE. k_mem_slab_init() does not verify that the requested blocks fit the buffer, and the ext2 wrapper discards its return value, so the slab is laid out past the end of the static buffer. The mount immediately reads block-group, bitmap and inode blocks of fs->block_size bytes each into these slab blocks, producing an out-of-bounds write into adjacent static memory on the first block read.

The entire path is gated only by data read from the mounted image, making this reachable by any attacker who can present a crafted ext2 image to a device that mounts it (for example a removable SD card or storage medium). Because the ext2 driver runs in kernel mode, supplying image bytes yields a supervisor-mode memory-corruption primitive, with impact ranging from denial of service to potential code execution.

The fix rejects s_log_block_size values that overflow the shift (greater than 11) or that produce a block size exceeding CONFIG_EXT2_MAX_BLOCK_SIZE, so the block slab can no longer be initialized larger than its backing buffer.

🎖@cveNotify

🚨 CVE-2026-78637
A vulnerability was detected in Fdawgs node-poppler up to 9.1.2/10.0.1. The impacted element is the function pdfInfo/pdfToText/pdfToCairo/pdfToPpm/pdfImages/pdfToHtml/pdfToPs/pdfFonts/pdfDetach/pdfAttach/pdfSeparate/pdfUnite of the file src/index.js of the component Argument Injection Handler. Performing a manipulation of the argument file_path results in argument injection. The attack may be initiated remotely. The patch is named db6e3f79d3beb20601be7e59669c39811ae3c330. It is recommended to apply a patch to fix this issue.

🎖@cveNotify

🚨 CVE-2026-18547
The Ultimate Member – User Profile, Registration, Login, Member Directory, Content Restriction & Membership Plugin plugin for WordPress is vulnerable to Stored Cross-Site Scripting via Textarea Profile Field with HTML Support (DOM Gadget via id Attribute) in all versions up to, and including, 2.12.1 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with subscriber-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This is possible because the wp_kses 'templates' allowlist permits the id attribute on div elements but does not neutralize unescaped quotes within its value; when pickadate.js concatenates the stored id value into an HTML string via jQuery .html() on profile page load, the smuggled onfocus and autofocus attribute syntax breaks out of attribute context and executes as JavaScript.

🎖@cveNotify

🚨 CVE-2026-79657
NLTK versions before 3.10.3 contain a remote code execution vulnerability in allowlisted pickle loaders that trust entire module namespaces instead of specific safe callables. Attackers can craft malicious pickle payloads invoking dangerous in-namespace functions like ReppTokenizer._execute and numpy.f2py.crackfortran.myeval through pickle REDUCE to execute arbitrary commands during model or tokenizer artifact loading.

🎖@cveNotify

🚨 CVE-2026-79660
Ech0 versions before 4.7.3 expose guest commenter email addresses through public API endpoints due to improper JSON serialization tags on the Comment model. Unauthenticated attackers can harvest all commenter emails by calling the /api/comments and /api/comments/public endpoints without authentication.

🎖@cveNotify

🚨 CVE-2026-79665
Ech0 before 4.5.1 contains an authorization bypass vulnerability where session tokens skip scope validation in RequireScopes middleware, allowing logged-in non-admin users to access admin endpoints. Attackers can read system logs, visitor statistics, user emails, and subscribe to live WebSocket logs by sending authenticated session tokens to unprotected endpoints.

🎖@cveNotify

🚨 CVE-2021-47996
Nokogiri before 1.11.4 (CRuby implementation only, when the packaged/vendored libxml2 is used) bundles libxml2 2.9.10, which is affected by multiple vulnerabilities addressed in libxml2 2.9.12, including a memory leak in xmlSchemaValidateStream (CVE-2019-20388), a global buffer over-read in xmlEncodeEntitiesInternal (CVE-2020-24977), a heap-based buffer overflow (CVE-2021-3517), and an out-of-bounds read (CVE-2021-3518). Processing crafted XML documents may lead to denial of service, information disclosure, or memory corruption.

🎖@cveNotify

🚨 CVE-2022-50998
Nokogiri before 1.13.9 (CRuby implementation using packaged libraries) bundles libxml2 v2.9.14, which is affected by CVE-2022-40304 (data corruption / double-free from an entity reference cycle when entity content is allocated from a dict) and CVE-2022-40303 (integer overflows when parsing with XML_PARSE_HUGE). Nokogiri 1.13.9 upgrades the packaged libxml2 to v2.10.3 to address these issues. Processing crafted XML input may lead to denial of service or memory corruption. (The advisory also references CVE-2022-2309, a NULL pointer dereference via iterwalk/canonicalize, which maintainers determined does not affect Nokogiri users.)

🎖@cveNotify

🚨 CVE-2022-50999
Nokogiri versions before 1.13.5 contain an integer overflow vulnerability in packaged libxml2 buffer handling functions that allows attackers to cause out-of-bounds memory writes. Attackers can exploit this by crafting multi-gigabyte XML files to trigger buffer overflows resulting in information disclosure, data modification, or denial of service.

🎖@cveNotify

🚨 CVE-2022-51000
Nokogiri before 1.13.2 (CRuby, when using packaged libraries) ships vendored libxml2 2.9.12 and libxslt 1.1.34, which are affected by two upstream CVEs. Via CVE-2021-30560 in libxslt, an application transforming XML with untrusted XSL stylesheets is vulnerable to a denial-of-service attack. Via CVE-2022-23308 in libxml2, an application parsing an untrusted document with parse option DTDVALID set to true and NOENT set to false may be vulnerable to denial of service, memory disclosure, or code execution. Nokogiri 1.13.2 upgrades vendored libxml2 to 2.9.13 and libxslt to 1.1.35.

🎖@cveNotify

🚨 CVE-2023-54354
Nokogiri before 1.14.3 (CRuby implementation only, when using the packaged libxml2) bundles libxml2 v2.10.3, which is vulnerable to NULL pointer dereferences in XML Schema processing (xmlSchemaFixupComplexType, CVE-2023-28484, and xmlSchemaCheckCOSSTDerivedOK). An attacker who supplies a crafted/malformed XML schema can cause libxml2 to dereference a NULL pointer and potentially segfault, resulting in a denial of service. Nokogiri 1.14.3 upgrades the packaged libxml2 to v2.10.4 to resolve these issues.

🎖@cveNotify

🚨 CVE-2024-58377
Nokogiri versions before 1.16.5 bundle libxml2 2.12.6, which is affected by CVE-2024-34459 in libxml2's xmllint tool. Nokogiri 1.16.5 upgrades the bundled libxml2 to 2.12.7 to address this. Per the maintainers, there is no impact to Nokogiri users because Nokogiri does not provide or expose the xmllint tool where the issue occurs.

🎖@cveNotify