🚨 CVE-2026-79672
Ech0 before 4.4.3 fails to enforce scope-based authorization on nine comment panel admin endpoints, allowing access tokens with minimal scopes to perform full comment moderation operations. Attackers with a limited-scope access token can list, approve, reject, delete comments, and modify comment system settings by directly accessing the unprotected panel endpoints.

🎖@cveNotify

🚨 CVE-2026-79673
Ech0 before 4.4.3 protects the PUT /user endpoint with the profile:read scope, a read-only scope, but allows write operations including password changes. An attacker with an admin's profile:read access token can change the admin's password and login to obtain an unrestricted session token that bypasses all scope enforcement.

🎖@cveNotify

🚨 CVE-2025-69223
AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Versions 3.13.2 and below allow a zip bomb to be used to execute a DoS against the AIOHTTP server. An attacker may be able to send a compressed request that when decompressed by AIOHTTP could exhaust the host's memory. This issue is fixed in version 3.13.3.

🎖@cveNotify

🚨 CVE-2026-21441
urllib3 is an HTTP client library for Python. urllib3's streaming API is designed for the efficient handling of large HTTP responses by reading the content in chunks, rather than loading the entire response body into memory at once. urllib3 can perform decoding or decompression based on the HTTP `Content-Encoding` header (e.g., `gzip`, `deflate`, `br`, or `zstd`). When using the streaming API, the library decompresses only the necessary bytes, enabling partial content consumption. Starting in version 1.22 and prior to version 2.6.3, for HTTP redirect responses, the library would read the entire response body to drain the connection and decompress the content unnecessarily. This decompression occurred even before any read methods were called, and configured read limits did not restrict the amount of decompressed data. As a result, there was no safeguard against decompression bombs. A malicious server could exploit this to trigger excessive resource consumption on the client. Applications and libraries are affected when they stream content from untrusted sources by setting `preload_content=False` when they do not disable redirects. Users should upgrade to at least urllib3 v2.6.3, in which the library does not decode content of redirect responses when `preload_content=False`. If upgrading is not immediately possible, disable redirects by setting `redirect=False` for requests to untrusted source.

🎖@cveNotify

🚨 CVE-2026-22029
React Router is a router for React. In @remix-run/router version prior to 1.23.2 and react-router 7.0.0 through 7.11.0, React Router (and Remix v1/v2) SPA open navigation redirects originating from loaders or actions in Framework Mode, Data Mode, or the unstable RSC modes can result in unsafe URLs causing unintended javascript execution on the client. This is only an issue if you are creating redirect paths from untrusted content or via an open redirect. There is no impact if Declarative Mode (<BrowserRouter>) is being used. This issue has been patched in @remix-run/router version 1.23.2 and react-router version 7.12.0.

🎖@cveNotify

🚨 CVE-2026-23490
pyasn1 is a generic ASN.1 library for Python. Prior to 0.6.2, a Denial-of-Service issue has been found that leads to memory exhaustion from malformed RELATIVE-OID with excessive continuation octets. This vulnerability is fixed in 0.6.2.

🎖@cveNotify

🚨 CVE-2026-22797
An issue was discovered in OpenStack keystonemiddleware 10.5 through 10.7 before 10.7.2, 10.8 and 10.9 before 10.9.1, and 10.10 through 10.12 before 10.12.1. The external_oauth2_token middleware fails to sanitize incoming authentication headers before processing OAuth 2.0 tokens. By sending forged identity headers such as X-Is-Admin-Project, X-Roles, or X-User-Id, an authenticated attacker may escalate privileges or impersonate other users. All deployments using the external_oauth2_token middleware are affected.

🎖@cveNotify

🚨 CVE-2025-13465
Lodash versions 4.0.0 through 4.17.22 are vulnerable to prototype pollution in the _.unset and _.omit functions. An attacker can pass crafted paths which cause Lodash to delete methods from global prototypes.

The issue permits deletion of properties but does not allow overwriting their original behavior.

This issue is patched on 4.17.23

🎖@cveNotify

🚨 CVE-2025-61726
The net/url package does not set a limit on the number of query parameters in a query. While the maximum size of query parameters in URLs is generally limited by the maximum request header size, the net/http.Request.ParseForm method can parse large URL-encoded forms. Parsing a large form containing many unique query parameters can cause excessive memory consumption.

🎖@cveNotify

🚨 CVE-2026-1615
Versions of the package jsonpath before 1.3.0 are vulnerable to Arbitrary Code Injection via unsafe evaluation of user-supplied JSON Path expressions. The library relies on the static-eval module to process JSON Path input, which is not designed to handle untrusted data safely. An attacker can exploit this vulnerability by supplying a malicious JSON Path expression that, when evaluated, executes arbitrary JavaScript code, leading to Remote Code Execution in Node.js environments or Cross-site Scripting (XSS) in browser contexts. This affects all methods that evaluate JSON Paths against objects, including .query, .nodes, .paths, .value, .parent, and .apply.

🎖@cveNotify

🚨 CVE-2026-25639
Axios is a promise based HTTP client for the browser and Node.js. Prior to versions 0.30.3 and 1.13.5, the mergeConfig function in axios crashes with a TypeError when processing configuration objects containing __proto__ as an own property. An attacker can trigger this by providing a malicious configuration object created via JSON.parse(), causing complete denial of service. This vulnerability is fixed in versions 0.30.3 and 1.13.5.

🎖@cveNotify

🚨 CVE-2026-29063
Immutable.js provides many Persistent Immutable data structures. Prior to versions 3.8.3, 4.3.7, and 5.1.5, Prototype Pollution is possible in immutable via the mergeDeep(), mergeDeepWith(), merge(), Map.toJS(), and Map.toObject() APIs. This issue has been patched in versions 3.8.3, 4.3.7, and 5.1.5.

🎖@cveNotify

🚨 CVE-2026-25679
url.Parse insufficiently validated the host/authority component and accepted some invalid URLs.

🎖@cveNotify

🚨 CVE-2026-27137
When verifying a certificate chain which contains a certificate containing multiple email address constraints which share common local portions but different domain portions, these constraints will not be properly applied, and only the last constraint will be considered.

🎖@cveNotify

🚨 CVE-2026-31812
Quinn is a pure-Rust, async-compatible implementation of the IETF QUIC transport protocol. Prior to 0.11.14, a remote, unauthenticated attacker can trigger a denial of service in applications using vulnerable quinn versions by sending a crafted QUIC Initial packet containing malformed quic_transport_parameters. In quinn-proto parsing logic, attacker-controlled varints are decoded with unwrap(), so truncated encodings cause Err(UnexpectedEnd) and panic. This is reachable over the network with a single packet and no prior trust or authentication. This vulnerability is fixed in 0.11.14.

🎖@cveNotify

🚨 CVE-2026-27459
pyOpenSSL is a Python wrapper around the OpenSSL library. Starting in version 22.0.0 and prior to version 26.0.0, if a user provided callback to `set_cookie_generate_callback` returned a cookie value greater than 256 bytes, pyOpenSSL would overflow an OpenSSL provided buffer. Starting in version 26.0.0, cookie values that are too long are now rejected.

🎖@cveNotify

🚨 CVE-2026-32829
lz4_flex is a pure Rust implementation of LZ4 compression/decompression. In versions 0.11.5 and below, and 0.12.0, decompressing invalid LZ4 data can leak sensitive information from uninitialized memory or from previous decompression operations. The library fails to properly validate offset values during LZ4 "match copy operations," allowing out-of-bounds reads from the output buffer. The block-based API functions (`decompress_into`, `decompress_into_with_dict`, and others when `safe-decode` is disabled) are affected, while all frame APIs are unaffected. The impact is potential exposure of sensitive data and secrets through crafted or malformed LZ4 input. This issue has been fixed in versions 0.11.6 and 0.12.1.

🎖@cveNotify

🚨 CVE-2026-33186
gRPC-Go is the Go language implementation of gRPC. Versions prior to 1.79.3 have an authorization bypass resulting from improper input validation of the HTTP/2 `:path` pseudo-header. The gRPC-Go server was too lenient in its routing logic, accepting requests where the `:path` omitted the mandatory leading slash (e.g., `Service/Method` instead of `/Service/Method`). While the server successfully routed these requests to the correct handler, authorization interceptors (including the official `grpc/authz` package) evaluated the raw, non-canonical path string. Consequently, "deny" rules defined using canonical paths (starting with `/`) failed to match the incoming request, allowing it to bypass the policy if a fallback "allow" rule was present. This affects gRPC-Go servers that use path-based authorization interceptors, such as the official RBAC implementation in `google.golang.org/grpc/authz` or custom interceptors relying on `info.FullMethod` or `grpc.Method(ctx)`; AND that have a security policy contains specific "deny" rules for canonical paths but allows other requests by default (a fallback "allow" rule). The vulnerability is exploitable by an attacker who can send raw HTTP/2 frames with malformed `:path` headers directly to the gRPC server. The fix in version 1.79.3 ensures that any request with a `:path` that does not start with a leading slash is immediately rejected with a `codes.Unimplemented` error, preventing it from reaching authorization interceptors or handlers with a non-canonical path string. While upgrading is the most secure and recommended path, users can mitigate the vulnerability using one of the following methods: Use a validating interceptor (recommended mitigation); infrastructure-level normalization; and/or policy hardening.

🎖@cveNotify

🚨 CVE-2026-33487
goxmlsig provides XML Digital Signatures implemented in Go. Prior to version 1.6.0, the `validateSignature` function in `validate.go` goes through the references in the `SignedInfo` block to find one that matches the signed element's ID. In Go versions before 1.22, or when `go.mod` uses an older version, there is a loop variable capture issue. The code takes the address of the loop variable `_ref` instead of its value. As a result, if more than one reference matches the ID or if the loop logic is incorrect, the `ref` pointer will always end up pointing to the last element in the `SignedInfo.References` slice after the loop. goxmlsig version 1.6.0 contains a patch.

🎖@cveNotify

🚨 CVE-2026-4926
Impact:

A bad regular expression is generated any time you have multiple sequential optional groups (curly brace syntax), such as `{a}{b}{c}:z`. The generated regex grows exponentially with the number of groups, causing denial of service.

Patches:

Fixed in version 8.4.0.

Workarounds:

Limit the number of sequential optional groups in route patterns. Avoid passing user-controlled input as route patterns.

🎖@cveNotify

🚨 CVE-2026-32285
The Delete function fails to properly validate offsets when processing malformed JSON input. This can lead to a negative slice index and a runtime panic, allowing a denial of service attack.

🎖@cveNotify