🚨 CVE-2026-33218
NATS-Server is a High-Performance server for NATS.io, a cloud and edge native messaging system. Prior to versions 2.11.15 and 2.12.6, a client which can connect to the leafnode port can crash the nats-server with a certain malformed message pre-authentication. Versions 2.11.15 and 2.12.6 contain a fix. As a workaround, disable leafnode support if not needed or restrict network connections to the leafnode port, if plausible without compromising the service offered.

🎖@cveNotify

🚨 CVE-2026-33219
NATS-Server is a High-Performance server for NATS.io, a cloud and edge native messaging system. Prior to versions 2.11.15 and 2.12.6, a malicious client which can connect to the WebSockets port can cause unbounded memory use in the nats-server before authentication; this requires sending a corresponding amount of data. This is a milder variant of CVE-2026-27571. That earlier issue was a compression bomb, this vulnerability is not. Attacks against this new issue thus require significant client bandwidth. Versions 2.11.15 and 2.12.6 contain a fix. As a workaround, disable websockets if not required for project deployment.

🎖@cveNotify

🚨 CVE-2026-33247
NATS-Server is a High-Performance server for NATS.io, a cloud and edge native messaging system. Prior to versions 2.11.15 and 2.12.6, if a nats-server is run with static credentials for all clients provided via argv (the command-line), then those credentials are visible to any user who can see the monitoring port, if that too is enabled. The `/debug/vars` end-point contains an unredacted copy of argv. Versions 2.11.15 and 2.12.6 contain a fix. As a workaround, configure credentials inside a configuration file instead of via argv, and do not enable the monitoring port if using secrets in argv. Best practice remains to not expose the monitoring port to the Internet, or to untrusted network sources.

🎖@cveNotify

🚨 CVE-2026-33487
goxmlsig provides XML Digital Signatures implemented in Go. Prior to version 1.6.0, the `validateSignature` function in `validate.go` goes through the references in the `SignedInfo` block to find one that matches the signed element's ID. In Go versions before 1.22, or when `go.mod` uses an older version, there is a loop variable capture issue. The code takes the address of the loop variable `_ref` instead of its value. As a result, if more than one reference matches the ID or if the loop logic is incorrect, the `ref` pointer will always end up pointing to the last element in the `SignedInfo.References` slice after the loop. goxmlsig version 1.6.0 contains a patch.

🎖@cveNotify

🚨 CVE-2026-4926
Impact:

A bad regular expression is generated any time you have multiple sequential optional groups (curly brace syntax), such as `{a}{b}{c}:z`. The generated regex grows exponentially with the number of groups, causing denial of service.

Patches:

Fixed in version 8.4.0.

Workarounds:

Limit the number of sequential optional groups in route patterns. Avoid passing user-controlled input as route patterns.

🎖@cveNotify

🚨 CVE-2026-32285
The Delete function fails to properly validate offsets when processing malformed JSON input. This can lead to a negative slice index and a runtime panic, allowing a denial of service attack.

🎖@cveNotify

🚨 CVE-2026-33997
Moby is an open source container framework. Prior to version 29.3.1, a security vulnerability has been detected that allows plugins privilege validation to be bypassed during docker plugin install. Due to an error in the daemon's privilege comparison logic, the daemon may incorrectly accept a privilege set that differs from the one approved by the user. Plugins that request exactly one privilege are also affected, because no comparison is performed at all. This issue has been patched in version 29.3.1.

🎖@cveNotify

🚨 CVE-2026-4800
Impact:

The fix for CVE-2021-23337 (https://github.com/advisories/GHSA-35jh-r3h4-6jhm) added validation for the variable option in _.template but did not apply the same validation to options.imports key names. Both paths flow into the same Function() constructor sink.

When an application passes untrusted input as options.imports key names, an attacker can inject default-parameter expressions that execute arbitrary code at template compilation time.

Additionally, _.template uses assignInWith to merge imports, which enumerates inherited properties via for..in. If Object.prototype has been polluted by any other vector, the polluted keys are copied into the imports object and passed to Function().

Patches:

Users should upgrade to version 4.18.0.

Workarounds:

Do not pass untrusted input as key names in options.imports. Only use developer-controlled, static key names.

🎖@cveNotify

🚨 CVE-2026-34986
Go JOSE provides an implementation of the Javascript Object Signing and Encryption set of standards in Go, including support for JSON Web Encryption (JWE), JSON Web Signature (JWS), and JSON Web Token (JWT) standards. Prior to 4.1.4 and 3.0.5, decrypting a JSON Web Encryption (JWE) object will panic if the alg field indicates a key wrapping algorithm (one ending in KW, with the exception of A128GCMKW, A192GCMKW, and A256GCMKW) and the encrypted_key field is empty. The panic happens when cipher.KeyUnwrap() in key_wrap.go attempts to allocate a slice with a zero or negative length based on the length of the encrypted_key. This code path is reachable from ParseEncrypted() / ParseEncryptedJSON() / ParseEncryptedCompact() followed by Decrypt() on the resulting object. Note that the parse functions take a list of accepted key algorithms. If the accepted key algorithms do not include any key wrapping algorithms, parsing will fail and the application will be unaffected. This panic is also reachable by calling cipher.KeyUnwrap() directly with any ciphertext parameter less than 16 bytes long, but calling this function directly is less common. Panics can lead to denial of service. This vulnerability is fixed in 4.1.4 and 3.0.5.

🎖@cveNotify

🚨 CVE-2026-4740
A flaw was found in Open Cluster Management (OCM), the technology underlying Red Hat Advanced Cluster Management (ACM). Improper validation of Kubernetes client certificate renewal allows a managed cluster administrator to forge a client certificate that can be approved by the OCM controller. This enables cross-cluster privilege escalation and may allow an attacker to gain control over other managed clusters, including the hub cluster.

🎖@cveNotify

🚨 CVE-2026-33815
Memory-safety vulnerability in github.com/jackc/pgx/v5.

🎖@cveNotify

🚨 CVE-2026-33816
Memory-safety vulnerability in github.com/jackc/pgx/v5.

🎖@cveNotify

🚨 CVE-2026-32280
During chain building, the amount of work that is done is not correctly limited when a large number of intermediate certificates are passed in VerifyOptions.Intermediates, which can lead to a denial of service. This affects both direct users of crypto/x509 and users of crypto/tls.

🎖@cveNotify

🚨 CVE-2026-32283
If one side of the TLS connection sends multiple key update messages post-handshake in a single record, the connection can deadlock, causing uncontrolled consumption of resources. This can lead to a denial of service. This only affects TLS 1.3.

🎖@cveNotify

🚨 CVE-2026-33810
When verifying a certificate chain containing excluded DNS constraints, these constraints are not correctly applied to wildcard DNS SANs which use a different case than the constraint. This only affects validation of otherwise trusted certificate chains, issued by a root CA in the VerifyOptions.Roots CertPool, or in the system certificate pool.

🎖@cveNotify

🚨 CVE-2026-5795
In Eclipse Jetty, the class JASPIAuthenticator initiates the authentication checks, which set two ThreadLocal variable.


Upon returning from the initial checks, there are conditions that cause an early return from the JASPIAuthenticator code without clearing those ThreadLocals.


A subsequent request using the same thread inherits the ThreadLocal values, leading to a broken access control and privilege escalation.

🎖@cveNotify

🚨 CVE-2025-62718
Axios is a promise based HTTP client for the browser and Node.js. Prior to 1.15.0 and 0.31.0, Axios does not correctly handle hostname normalization when checking NO_PROXY rules. Requests to loopback addresses like localhost. (with a trailing dot) or [::1] (IPv6 literal) skip NO_PROXY matching and go through the configured proxy. This goes against what developers expect and lets attackers force requests through a proxy, even if NO_PROXY is set up to protect loopback or internal services. This issue leads to the possibility of proxy bypass and SSRF vulnerabilities allowing attackers to reach sensitive loopback or internal services despite the configured protections. This vulnerability is fixed in 1.15.0 and 0.31.0.

🎖@cveNotify

🚨 CVE-2026-4878
A flaw was found in libcap. A local unprivileged user can exploit a Time-of-check-to-time-of-use (TOCTOU) race condition in the `cap_set_file()` function. This allows an attacker with write access to a parent directory to redirect file capability updates to an attacker-controlled file. By doing so, capabilities can be injected into or stripped from unintended executables, leading to privilege escalation.

🎖@cveNotify

🚨 CVE-2026-1584
A flaw was found in gnutls. A remote, unauthenticated attacker can exploit this vulnerability by sending a specially crafted ClientHello message with an invalid Pre-Shared Key (PSK) binder value during the TLS handshake. This can lead to a NULL pointer dereference, causing the server to crash and resulting in a remote Denial of Service (DoS) condition.

🎖@cveNotify

🚨 CVE-2026-40175
Axios is a promise based HTTP client for the browser and Node.js. Versions prior to 1.15.0 and 0.3.1 are vulnerable to a specific gadget-style attack chain in which prototype pollution in a third-party dependency may be leveraged to inject unsanitized header values into outbound requests. This vulnerability is fixed in 1.15.0 and 0.3.1.

🎖@cveNotify

🚨 CVE-2026-2332
In Eclipse Jetty, the HTTP/1.1 parser is vulnerable to request smuggling when chunk extensions are used, similar to the "funky chunks" techniques outlined here:
* https://w4ke.info/2025/06/18/funky-chunks.html

* https://w4ke.info/2025/10/29/funky-chunks-2.html


Jetty terminates chunk extension parsing at \r\n inside quoted strings instead of treating this as an error.




POST / HTTP/1.1
Host: localhost
Transfer-Encoding: chunked

1;ext="val
X
0

GET /smuggled HTTP/1.1
...





Note how the chunk extension does not close the double quotes, and it is able to inject a smuggled request.

🎖@cveNotify