🚨 CVE-2026-74723
In the Linux kernel, the following vulnerability has been resolved:

btrfs: lzo: reject inline extents without valid headers

[BUG]
For a crafted btrfs image, the following KASAN can be triggered when
reading an inline lzo compressed file extent:

BUG: KASAN: slab-out-of-bounds in lzo_decompress+0x57d/0x700
Read of size 4 at addr ffff888006f2e644 by task btrfs_lzo_inlin/77

Call Trace:
<TASK>
dump_stack_lvl+0x5b/0x70
print_report+0xd1/0x610
kasan_report+0xe0/0x110
__asan_report_load_n_noabort+0x13/0x20
lzo_decompress+0x57d/0x700
btrfs_decompress+0x140/0x1c0
uncompress_inline+0x147/0x1b0
btrfs_get_extent+0xb23/0x10a0
btrfs_do_readpage.constprop.0+0x538/0x1ac0
btrfs_readahead+0x32f/0x5f0
read_pages+0x16f/0x850
page_cache_ra_unbounded+0x296/0x490
do_page_cache_ra+0xd9/0x130
page_cache_sync_ra+0x3ee/0x6f0
filemap_get_pages+0x306/0x15c0
filemap_read+0x329/0xd00
btrfs_file_read_iter+0x1f8/0x2b0
vfs_read+0x4ef/0x720
ksys_read+0xf8/0x1d0
__x64_sys_read+0x71/0xb0
x64_sys_call+0x1ab0/0x1b70
do_syscall_64+0x61/0x470
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>

[CAUSE]
For an inline lzo compressed file extent, there should always be one lzo
header, recording the total length of the compressed data, followed by
one segment header, recording the compressed lzo payload.

But if a crafted inline lzo compressed file extent contains only an lzo
header, without the segment header or payload, lzo_decompress() will
still try to read the segment header, causing a read beyond the item
boundary.

Furthermore if the inline lzo compressed file extent is the first item
of the leaf, it will be at the extent buffer boundary. The above
out-of-boundary read will go beyond the extent buffer boundary,
triggering the above KASAN report.

[FIX]
Validate the total length of the inlined lzo compressed file extent, to
make sure there is at least one LZO header and one segment header, and a
non-zero payload.

[ Rework the commit message to remove slop ]

🎖@cveNotify

🚨 CVE-2026-74724
In the Linux kernel, the following vulnerability has been resolved:

ipvs: avoid out-of-bounds write in ip_vs_nat_icmp

Sashiko warns that local attacker can modify the packet
while it is processed by IPVS. Some places read the
IP ihl field multiple times which can cause out-of-bounds
access. One such place is ip_vs_nat_icmp where we
can write after the validated area.

Fix it by providing ciph argument just like it is done for
IPv6 and use ciph->len as offset to the embedded transport
header.

Modify some IPv4 header checks by reading the ihl field
only once.

🎖@cveNotify

🚨 CVE-2026-74725
In the Linux kernel, the following vulnerability has been resolved:

enic: fix tx_hang_reset use-after-free on device removal

enic_remove() cancels the reset and change_mtu_work items but does not
cancel tx_hang_reset. A TX timeout that fires while the device is being
removed can schedule enic_tx_hang_reset() so that it runs after
free_netdev(), resulting in a use-after-free.

cancel_work_sync() alone is not sufficient here: the still-live watchdog
and notify paths can re-schedule these work items in the window between
the cancel and unregister_netdev(). Use disable_work_sync(), which
cancels the work and blocks any subsequent schedule_work() from
requeuing it, and apply it to the reset and change_mtu_work items as
well so the same requeue race is closed for all teardown work.

🎖@cveNotify

🚨 CVE-2026-74726
In the Linux kernel, the following vulnerability has been resolved:

bonding: alb: re-check primary_is_promisc under RTNL in bond_alb_monitor

bond_alb_monitor() reads primary_is_promisc under RCU, then drops RCU and
takes RTNL via rtnl_trylock() before undoing the promiscuity it set on the
active slave. In that window the active slave can change under RTNL
(RTM_DELLINK -> __bond_release_one() -> bond_alb_handle_active_change()),
which already drops the promiscuity and clears primary_is_promisc. The
monitor still acts on the stale decision: if the slave was removed with no
failover, curr_active_slave is now NULL and the deref faults; if it failed
over, the stale dev_set_promiscuity(-1) underflows the new slave's
promiscuity counter and pins it in IFF_PROMISC.

Oops: general protection fault, probably for non-canonical address ...
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
Workqueue: b42 bond_alb_monitor
RIP: 0010:bond_alb_monitor (drivers/net/bonding/bond_alb.c:1600)
process_one_work (kernel/workqueue.c:3322)
worker_thread (kernel/workqueue.c:3486)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
Kernel panic - not syncing: Fatal exception

Re-check primary_is_promisc (and curr_active_slave) after taking RTNL so
the monitor only undoes an increment it still owns. The other bonding
monitors already re-read state under RTNL in their commit phase
(bond_miimon_commit/bond_ab_arp_commit); bond_alb_monitor() was the only
one acting on the pre-trylock decision.

🎖@cveNotify

🚨 CVE-2026-74727
In the Linux kernel, the following vulnerability has been resolved:

ovpn: skip rehash for peers already removed from by_id

ovpn_nl_peer_set_doit() resolves the target peer via
ovpn_peer_get_by_id() before taking ovpn->lock. In the window between
the lookup (which only takes a refcount) and the subsequent
spin_lock_bh(&ovpn->lock), a concurrent OVPN_CMD_PEER_DEL, keepalive
expiry, or socket teardown can take ovpn->lock first, run
ovpn_peer_remove() to unhash the peer from all four tables (by_id,
by_vpn_addr4/6, by_transp_addr) and release the lock. set_doit then
acquires ovpn->lock and calls ovpn_peer_hash_vpn_ip(), which
re-inserts the now-removed peer back into the rehashing tables.

The same race affects the float path: ovpn_peer_endpoints_update()
holds only a refcount and acquires ovpn->lock very late (after async
AEAD decrypt and a netlink notification), then rehashes the peer
in the by_transp_addr table.

The resurrected peer becomes reachable again from the RX lookup
(ovpn_peer_get_by_transp_addr) and the TX VPN-IP lookup, even though
userspace believes it is gone. Once the data-path refcount drops the
peer is freed via call_rcu while the hash entries embedded in it
remain linked, opening a UAF window.

Bail out of the rehash when hash_entry_id is unhashed, mirroring
the sentinel already used by ovpn_peer_remove() to detect the
already-removed state. The check is safe under ovpn->lock, which
serializes every mutation of hash_entry_id, and is a no-op for the
add path because ovpn_peer_add_mp() inserts hash_entry_id before
calling ovpn_peer_hash_vpn_ip().

🎖@cveNotify

🚨 CVE-2026-74728
In the Linux kernel, the following vulnerability has been resolved:

xfs: handle NULL b_addr in xfs_buf_free

When xfs_buf_alloc_backing_mem() fails, xfs_buf_free() is called with
bp->b_addr still NULL. The code falls through to the folio_put path
which calls virt_to_folio(NULL), dereferencing an invalid address and
causing a kernel crash.

Call Trace:
xfs_buf_free+0x25f/0x510
xfs_buf_alloc+0xc98/0x19b0
xfs_buf_find_insert+0x55/0x14d0
xfs_buf_get_map+0x122b/0x17c0
xfbtree_init_leaf_block+0x11c/0x4a0
xfbtree_init+0x1bb/0x460
xrep_rmap_setup_scan+0x100/0x1f0
xrep_rmapbt+0x41/0xc0

Fix this by skipping folio_put() when bp->b_addr is NULL.

🎖@cveNotify

🚨 CVE-2026-74730
In the Linux kernel, the following vulnerability has been resolved:

NFS: Pin the 'struct nfs_server' during a FREE_STATEID call

Dan Aloni reports that he was able to hit a use-after-free bug if a
FREE_STATEID operation gets delayed for whatever reason. Fix this by
bumping the refcount of the 'struct nfs_server' object for the duration
of the FREE_STATEID so it doesn't get cleaned up from underneath us
while operations are still in flight.

🎖@cveNotify

🚨 CVE-2026-74731
In the Linux kernel, the following vulnerability has been resolved:

sched_ext: Skip sub-disable teardown for never-linked sub-schedulers

A sub-scheduler enable can fail before scx_link_sched() links the sched into
the hierarchy, e.g. when the parent is already being disabled, and cleanup
still runs the full scx_sub_disable().

That is racy against root disable: drain_descendants() is the only ordering
between a sub's disable-time task walk and root disable's all-task teardown,
and an unlinked sub is invisible to it. Root's teardown can thus run between
the never-linked sub's drain and its walk, exiting every task to no
scheduler.

The walk then trips the membership WARN and re-homes the exited tasks onto
the dying hierarchy, a use-after-free.

Skip the cgroup ownership reset and the task walk if @sch was never linked,
indicated by the empty ->sibling as unlinking only happens later in the same
function. The membership WARN remains valid: a linked sub is always waited
on by an ancestor's drain.

🎖@cveNotify

🚨 CVE-2026-74732
In the Linux kernel, the following vulnerability has been resolved:

drm/amd/display: Check for tg ops in dce110_set_avmute

Some older DCE timing generators do not implement is_tg_enabled in
their ops table. Calling it unconditionally when waiting for AV mute
frames causes a NULL pointer dereference on Southern Islands dGPUs
when turning the display off over HDMI.

Check that tg and the required ops exist before waiting for frames.

(cherry picked from commit 2686a0c0aaa07bec2e24131835cf27b5fd4935a5)

🎖@cveNotify

🚨 CVE-2026-74733
In the Linux kernel, the following vulnerability has been resolved:

gpio: pca953x: fix pca953x_irq_bus_sync_unlock regmap lock

Locking is disabled in the regmap config as this driver uses its own
lock. This means that all calls to regmap functions (read or write) must
hold the i2c_lock. The function pca953x_irq_bus_sync_unlock() did not do
this, and it was therefore possible that multiple threads could cause an
incorrect register to be read/written.

A previous patch partly fixed this, but only protected the write to the
interrupt mask register, and not the read from the direction register.

🎖@cveNotify

🚨 CVE-2025-11393
A flaw was found in runtimes-inventory-rhel8-operator. An internal proxy component is incorrectly configured. Because of this flaw, the proxy attaches the cluster's main administrative credentials to any command it receives, instead of only the specific reports it is supposed to handle.

This allows a standard user within the cluster to send unauthorized commands to the management platform, effectively acting with the full permissions of the cluster administrator. This could lead to unauthorized changes to the cluster's configuration or status on the Red Hat platform.

🎖@cveNotify

🚨 CVE-2026-0013
In setupLayout of PickActivity.java, there is a possible way to start any activity as a DocumentsUI app due to a confused deputy. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.

🎖@cveNotify

🚨 CVE-2026-7374
A flaw was found in KubeVirt's virt-handler component. This vulnerability allows an authenticated OpenShift user with edit permissions in a single namespace to exploit improper symlink validation when connecting to virtual machine console sockets. By replacing the console socket with a symlink to the host's container runtime (CRI-O) socket, an attacker can hijack virt-handler's privileged connection. This enables the attacker to access any Unix socket on the host, potentially leading to full control of the node and the entire cluster.

🎖@cveNotify

🚨 CVE-2026-9804
A flaw was found in KubeVirt's virt-exportserver component. An attacker with specific namespace-level access can exploit a path traversal vulnerability in the VMExport directory endpoint. By placing a symbolic link (symlink) within an exported filesystem Persistent Volume Claim (PVC) that points outside its designated mount root, the attacker can read arbitrary files from the exporter pod's filesystem. This leads to information disclosure, potentially exposing sensitive data.

🎖@cveNotify

🚨 CVE-2026-13201
A flaw was found in KubeVirt's safepath package used by virt-handler. The OpenAtNoFollow function uses O_PATH|O_NOFOLLOW to obtain a file descriptor to a path leaf, but downstream operations resolve the path via /proc/self/fd/N using link-following syscalls. When the leaf is a symlink, the kernel dereferences it, defeating the intended no-follow protection. An attacker with access to a virt-launcher pod can exploit this to redirect virt-handler's IPC socket connections, including the notify socket used for VM domain lifecycle events. By hijacking this socket, the attacker can inject arbitrary domain events into virt-handler, causing it to take incorrect lifecycle actions, corrupt VM state in the Kubernetes API, or crash — resulting in sustained denial of VM management services for all virtual machines on the affected node. Additionally, the same symlink following flaw allows virt-handler to apply file ownership or permission changes to unintended host paths.

🎖@cveNotify

🚨 CVE-2026-13622
A symlink following vulnerability was found in KubeVirt's virt-handler migration proxy. During live migration, virt-handler dials Unix sockets inside the target virt-launcher pod via /proc/<pid>/root/ paths using net.Dial() without symlink protection. These socket paths reside in qemu-owned directories writable by the virt-launcher user. An attacker with namespace edit and pods/exec permissions can replace a migration proxy socket with a symlink to the host CRI-O socket. Because virt-handler runs as root in the host mount namespace, absolute symlink targets resolve against the host filesystem, and the bidirectional io.Copy proxy relays attacker-controlled bytes to the container runtime, enabling full node compromise.

🎖@cveNotify

🚨 CVE-2026-75866
Punk::OAuth2::Server versions through 0.03 for Perl issue access tokens outside a client's registered scopes and grant types because no authorization path reads them.

Punk::OAuth2::Server::Store registers scopes and grant_types per client and documents both as client registration. token dispatches on the grant_type in the request body, so a client registered for authorization_code alone can ask for client_credentials, and that arm passes the requested scope straight to the minter, which signs it into the at+jwt access token. authorize copies the query scope into the authorization code record without comparing it against the registration, leaving the optional consent hook as the only check between an arbitrary scope and the issued code. redirect_uris on the same client row is read and enforced.

A registered client can obtain a correctly signed token carrying any scope it names, and a resource server running Punk::OAuth2::Checker accepts that token and honours the scope. A client registered without a secret authenticates on its client_id alone, so anyone who knows that identifier can request one.

🎖@cveNotify

🚨 CVE-2026-75870
Punk versions before 0.18 for Perl allow session cookie forgery via an empty default HMAC key when a session is declared without a secret.

The session keyword freezes its options onto the application as given: it does not require a secret, warn, or refuse to start when one is absent. The cookie read and the write-back both default that key to the empty string, so a declaration with no secret option, or with an undefined or empty one, signs and verifies with a zero-length HMAC-SHA256 key.

An attacker who knows the cookie format can then mint one offline carrying any contents the session holds, such as a user identifier or a role. Nothing marks the misconfiguration at runtime: cookies are well formed and sessions round-trip as expected.

🎖@cveNotify

🚨 CVE-2025-11393
A flaw was found in runtimes-inventory-rhel8-operator. An internal proxy component is incorrectly configured. Because of this flaw, the proxy attaches the cluster's main administrative credentials to any command it receives, instead of only the specific reports it is supposed to handle.

This allows a standard user within the cluster to send unauthorized commands to the management platform, effectively acting with the full permissions of the cluster administrator. This could lead to unauthorized changes to the cluster's configuration or status on the Red Hat platform.

🎖@cveNotify

🚨 CVE-2026-7163
A vulnerability in the assisted-service REST API, an optional Assisted Installer (assisted-service) component in the Multicluster Engine (MCE), allows an authenticated user with minimal namespace-scoped privileges to obtain administrative credentials for arbitrary clusters provisioned through the hub.

The credentials download endpoint (GET /v2/clusters/{cluster_id}/credentials, which returns the kubeadmin password) and the kubeconfig download endpoint are operational in AUTH_TYPE=local mode, the only authentication mode available in on-premises ACM/MCE hub deployments. The local authenticator unconditionally grants full administrative access to any request bearing a valid JWT, with no per-endpoint restrictions. A valid local JWT is embedded as a plaintext query parameter in InfraEnvStatus.ISODownloadURL and is readable by any user who has get rights on an InfraEnv object in their own namespace.

The affected components ship as part of Multicluster Engine (MCE). The Red Hat Advanced Cluster Management (ACM) deployments that include MCE are equally affected.
This issue does not affect the hosted SaaS offering (console.redhat.com), which uses a different authentication mode.

Successful exploitation gives the attacker the kubeadmin password and kubeconfig for any OpenShift cluster provisioned through the affected hub, granting unrestricted root-level administrative access to those spoke clusters.

🎖@cveNotify

🚨 CVE-2026-12999
The Infineon Airoc Wi-Fi driver's transmit callback airoc_mgmt_send() in drivers/wifi/infineon/airoc_wifi.c allocates a net_buf from the fixed airoc_pool for every outbound packet. When whd_network_send_ethernet_data() returns a synchronous failure, the underlying WHD library does not take ownership of the buffer, but the pre-fix driver returned -EIO without releasing it. Each failed transmit therefore permanently leaks one buffer from the pool.

airoc_pool is small and fixed (AIROC_WIFI_TX_PACKET_POOL_COUNT + AIROC_WIFI_RX_PACKET_POOL_COUNT, default 20 buffers) and is shared by WHD's whd_host_buffer_get callback for both transmit and receive. Once enough send failures have leaked the pool dry, airoc_wifi_host_buffer_get() returns WHD_BUFFER_ALLOC_FAIL for all subsequent allocations, so both transmit and the WHD-driven receive path fail and Wi-Fi connectivity is lost until the device is rebooted.

The leak occurs only on the transmit error path. A Wi-Fi-adjacent attacker can influence the conditions that cause synchronous send failures (for example by deauthenticating/disassociating the station while the local stack continues to attempt transmits), and ordinary transient failures over the device's lifetime accumulate toward the same state. Reliable on-demand triggering is of high complexity and the impact is availability-only, but the resulting denial of service is permanent and non-recoverable without a reboot.

The fix releases the buffer with airoc_wifi_buffer_release() on the failure branch, returning it to the pool. The commit also removes a redundant k_sem_give() in airoc_mgmt_disconnect(); because data->sema_common is a binary semaphore (limit 1) the duplicate give merely saturated at 1 and had no security impact.

🎖@cveNotify