🚨 CVE-2026-53424
Authentication Bypass by Capture-replay vulnerability in dropbox samly allows an attacker to authenticate as the subject of a captured SAML assertion by resubmitting it.
Samly.Helper.decode_idp_auth_resp/3 in lib/samly/helper.ex calls esaml_sp:validate_assertion/2, whose default duplicate detector is a no-op. The /3 arity accepting a DuplicateFun exists in esaml and implements the check, but Samly never calls it and offers no configuration to supply one, so the SAML 2.0 Web Browser SSO Profile requirement that a bearer assertion be used once is unenforced. An attacker holding a valid SAMLResponse obtained from the network, from browser history, or from logs can submit the identical bytes repeatedly until the assertion's NotOnOrAfter passes, each time establishing a session as the assertion's subject.
This issue affects samly: from 0.3.0 onward.
🎖@cveNotify
Authentication Bypass by Capture-replay vulnerability in dropbox samly allows an attacker to authenticate as the subject of a captured SAML assertion by resubmitting it.
Samly.Helper.decode_idp_auth_resp/3 in lib/samly/helper.ex calls esaml_sp:validate_assertion/2, whose default duplicate detector is a no-op. The /3 arity accepting a DuplicateFun exists in esaml and implements the check, but Samly never calls it and offers no configuration to supply one, so the SAML 2.0 Web Browser SSO Profile requirement that a bearer assertion be used once is unenforced. An attacker holding a valid SAMLResponse obtained from the network, from browser history, or from logs can submit the identical bytes repeatedly until the assertion's NotOnOrAfter passes, each time establishing a session as the assertion's subject.
This issue affects samly: from 0.3.0 onward.
🎖@cveNotify
🚨 CVE-2026-53425
Insufficient Verification of Data Authenticity vulnerability in dropbox samly allows an attacker to establish an authenticated session using a SAML response the service provider never requested.
Samly.SPHandler.validate_authresp/3 in lib/samly/sp_handler.ex validates a SAML response for the SP-initiated flow by comparing only the RelayState value, the IdP identifier, and the presence of a target URL held in the session. It never compares SubjectConfirmationData/@InResponseTo against the ID of the AuthnRequest the service provider issued, and that request ID is never persisted, so no comparison is possible. SAML 2.0 Core section 4.1.4.3 requires a service provider to reject a response whose InResponseTo does not match a request it made. The underlying esaml library checks status, signature, recipient, audience, and staleness, but likewise never inspects InResponseTo, so nothing else closes the gap. Exploitation requires a validly signed assertion from the trusted IdP, which an attacker can obtain for their own account, and a RelayState matching the victim's session; the assertion signature itself remains intact, so this is not a signature-forgery issue.
This issue affects samly: from 0.3.0 onward.
🎖@cveNotify
Insufficient Verification of Data Authenticity vulnerability in dropbox samly allows an attacker to establish an authenticated session using a SAML response the service provider never requested.
Samly.SPHandler.validate_authresp/3 in lib/samly/sp_handler.ex validates a SAML response for the SP-initiated flow by comparing only the RelayState value, the IdP identifier, and the presence of a target URL held in the session. It never compares SubjectConfirmationData/@InResponseTo against the ID of the AuthnRequest the service provider issued, and that request ID is never persisted, so no comparison is possible. SAML 2.0 Core section 4.1.4.3 requires a service provider to reject a response whose InResponseTo does not match a request it made. The underlying esaml library checks status, signature, recipient, audience, and staleness, but likewise never inspects InResponseTo, so nothing else closes the gap. Exploitation requires a validly signed assertion from the trusted IdP, which an attacker can obtain for their own account, and a RelayState matching the victim's session; the assertion signature itself remains intact, so this is not a signature-forgery issue.
This issue affects samly: from 0.3.0 onward.
🎖@cveNotify
🚨 CVE-2026-74836
Allocation of Resources Without Limits or Throttling vulnerability in mtrudel bandit allows an unauthenticated remote attacker to pin an unbounded number of HTTP/2 stream processes indefinitely via connection-level flow control. When a stream's response body outruns the HTTP/2 connection-level send window (default 65,535 bytes, shared across all streams on the connection), Bandit.HTTP2.Connection queues the remaining bytes and a reply closure in pending_sends and the stream process blocks forever inside a synchronous call to the connection process. Nothing bounds that wait and nothing purges the queue: a client RST_STREAM for the blocked stream is delivered to its mailbox but never read while it is stuck inside the call, so cancelling frees nothing, and periodic PING frames keep the transport-level read timeout from ever firing. The equivalent block on the stream-level send window is already bounded at 15 seconds; the connection-level path had no such bound.
Each stalled stream pins its process, Plug state, and any resource the Plug holds across the blocked write, such as a pooled upstream connection in a reverse-proxy Plug. The attacker chooses any endpoint whose response exceeds the connection window (common for most non-trivial payloads), grants a generous stream-level window so only the connection window limits it, and keeps the connection alive with periodic PINGs; the primitive is repeatable across streams and connections at the cost of one idle socket each.
This issue affects bandit: from 0.3.4 before 1.12.5.
🎖@cveNotify
Allocation of Resources Without Limits or Throttling vulnerability in mtrudel bandit allows an unauthenticated remote attacker to pin an unbounded number of HTTP/2 stream processes indefinitely via connection-level flow control. When a stream's response body outruns the HTTP/2 connection-level send window (default 65,535 bytes, shared across all streams on the connection), Bandit.HTTP2.Connection queues the remaining bytes and a reply closure in pending_sends and the stream process blocks forever inside a synchronous call to the connection process. Nothing bounds that wait and nothing purges the queue: a client RST_STREAM for the blocked stream is delivered to its mailbox but never read while it is stuck inside the call, so cancelling frees nothing, and periodic PING frames keep the transport-level read timeout from ever firing. The equivalent block on the stream-level send window is already bounded at 15 seconds; the connection-level path had no such bound.
Each stalled stream pins its process, Plug state, and any resource the Plug holds across the blocked write, such as a pooled upstream connection in a reverse-proxy Plug. The attacker chooses any endpoint whose response exceeds the connection window (common for most non-trivial payloads), grants a generous stream-level window so only the connection window limits it, and keeps the connection alive with periodic PINGs; the primitive is repeatable across streams and connections at the cost of one idle socket each.
This issue affects bandit: from 0.3.4 before 1.12.5.
🎖@cveNotify
🚨 CVE-2026-75484
Improper Neutralization of CRLF Sequences ('CRLF Injection') vulnerability in mtrudel bandit allows an unauthenticated remote attacker to smuggle CR, LF, or NUL characters into application-visible request headers via HTTP/2. Bandit.HTTP2.Stream.read_headers/1 validates pseudo-header placement and uniqueness, header-name casing, connection-specific headers, the te value, and content-length, but never checks field values. Because HPACK carries arbitrary octets, a HEADERS block whose field values contain \r, \n, or \0 decodes without error and the values land in conn.req_headers unchanged. The HTTP/1 path already rejects the same octets; HTTP/2 did not.
Bandit itself is not a sink for the injected bytes: its own logging uses fixed strings or inspect, and HTTP/2 response headers are HPACK-encoded and separately rejected by Plug's put_resp_header, so response splitting is not reachable through this path. The risk is entirely in how a downstream application consumes header values, such as appending one verbatim to a plain-text log or concatenating it into an upstream request. A related gap bundled in the same fix: only :method, :scheme, and :path were checked for at most one occurrence; a duplicate :authority pseudo-header was accepted, with the first instance silently winning as conn.host while a conflicting value remained visible to the application.
This issue affects bandit: from 1.4.0 before 1.12.5.
🎖@cveNotify
Improper Neutralization of CRLF Sequences ('CRLF Injection') vulnerability in mtrudel bandit allows an unauthenticated remote attacker to smuggle CR, LF, or NUL characters into application-visible request headers via HTTP/2. Bandit.HTTP2.Stream.read_headers/1 validates pseudo-header placement and uniqueness, header-name casing, connection-specific headers, the te value, and content-length, but never checks field values. Because HPACK carries arbitrary octets, a HEADERS block whose field values contain \r, \n, or \0 decodes without error and the values land in conn.req_headers unchanged. The HTTP/1 path already rejects the same octets; HTTP/2 did not.
Bandit itself is not a sink for the injected bytes: its own logging uses fixed strings or inspect, and HTTP/2 response headers are HPACK-encoded and separately rejected by Plug's put_resp_header, so response splitting is not reachable through this path. The risk is entirely in how a downstream application consumes header values, such as appending one verbatim to a plain-text log or concatenating it into an upstream request. A related gap bundled in the same fix: only :method, :scheme, and :path were checked for at most one occurrence; a duplicate :authority pseudo-header was accepted, with the first instance silently winning as conn.host while a conflicting value remained visible to the application.
This issue affects bandit: from 1.4.0 before 1.12.5.
🎖@cveNotify
🚨 CVE-2026-20679
The issue was addressed with improved checks. This issue is fixed in macOS Sequoia 15.7.5, macOS Sonoma 14.8.5, macOS Tahoe 26.4. Processing a maliciously crafted file may lead to unexpected app termination.
🎖@cveNotify
The issue was addressed with improved checks. This issue is fixed in macOS Sequoia 15.7.5, macOS Sonoma 14.8.5, macOS Tahoe 26.4. Processing a maliciously crafted file may lead to unexpected app termination.
🎖@cveNotify
Apple Support
About the security content of macOS Tahoe 26.4 - Apple Support
This document describes the security content of macOS Tahoe 26.4.
🚨 CVE-2026-66797
Improper access control in CloudStack's annotation functionality allows unauthorized comment creation and disclosure.
The addAnnotation and listAnnotation APIs perform an ownership check when an entity's UUID is specified, but fail to honor its result correctly. This lets any authenticated user write annotations to, and disclose existing annotations/comments on, an entity they don't own by simply supplying its UUID.
This issue affects Apache CloudStack: from 4.15.0.0 through 4.20.3.0 and from 4.21.0.0 through 4.22.1.0.
Users are recommended to upgrade to version 4.20.3.1 or 4.22.1.1 or later, which fixes the issue.
🎖@cveNotify
Improper access control in CloudStack's annotation functionality allows unauthorized comment creation and disclosure.
The addAnnotation and listAnnotation APIs perform an ownership check when an entity's UUID is specified, but fail to honor its result correctly. This lets any authenticated user write annotations to, and disclose existing annotations/comments on, an entity they don't own by simply supplying its UUID.
This issue affects Apache CloudStack: from 4.15.0.0 through 4.20.3.0 and from 4.21.0.0 through 4.22.1.0.
Users are recommended to upgrade to version 4.20.3.1 or 4.22.1.1 or later, which fixes the issue.
🎖@cveNotify
🚨 CVE-2026-71494
Infracost provides cloud cost intelligence for engineers, AI coding agents, and CI/CD. Prior to 0.10.45, internal/hcl/remote_variables_loader.go and related Terraform Cloud, remote-plan, and Terragrunt registry request paths can attach a configured Terraform Cloud or registry token to a destination hostname derived from untrusted Terraform input without confirming that it is the configured trusted host. When a CI run provides a token while scanning attacker-controlled Terraform, including pull_request_target or a same-repository pull request, an attacker can direct the request to an attacker-controlled host and disclose the token. Standard fork pull_request workflows without secrets are not exposed. This issue is fixed in version 0.10.45.
🎖@cveNotify
Infracost provides cloud cost intelligence for engineers, AI coding agents, and CI/CD. Prior to 0.10.45, internal/hcl/remote_variables_loader.go and related Terraform Cloud, remote-plan, and Terragrunt registry request paths can attach a configured Terraform Cloud or registry token to a destination hostname derived from untrusted Terraform input without confirming that it is the configured trusted host. When a CI run provides a token while scanning attacker-controlled Terraform, including pull_request_target or a same-repository pull request, an attacker can direct the request to an attacker-controlled host and disclose the token. Standard fork pull_request workflows without secrets are not exposed. This issue is fixed in version 0.10.45.
🎖@cveNotify
GitHub
fix(security): scope Terraform Cloud/registry tokens to trusted hosts… · infracost/infracost@3d24c75
… (#3590)
* fix(security): scope Terraform Cloud/registry tokens to trusted hosts [FIX-350]
Several code paths attached a configured secret token to an HTTP request
whose destination host was der...
* fix(security): scope Terraform Cloud/registry tokens to trusted hosts [FIX-350]
Several code paths attached a configured secret token to an HTTP request
whose destination host was der...
🚨 CVE-2026-77235
Missing privilege verification in the secure context cleanup handler in FreeRTOS-Kernel before 11.3.1 might allow local users to cause a use-after-free condition in secure-world memory via the SVC handler for secure context deallocation. To remediate this issue, users should upgrade to version 11.3.1 or later.
🎖@cveNotify
Missing privilege verification in the secure context cleanup handler in FreeRTOS-Kernel before 11.3.1 might allow local users to cause a use-after-free condition in secure-world memory via the SVC handler for secure context deallocation. To remediate this issue, users should upgrade to version 11.3.1 or later.
🎖@cveNotify
🚨 CVE-2026-77236
Missing minimum size validation in secure context allocation in FreeRTOS-Kernel before 11.3.1 might allow local users to corrupt secure-world heap metadata via an out-of-bounds write with an undersized stack size parameter. To remediate this issue, users should upgrade to version 11.3.1 or later.
🎖@cveNotify
Missing minimum size validation in secure context allocation in FreeRTOS-Kernel before 11.3.1 might allow local users to corrupt secure-world heap metadata via an out-of-bounds write with an undersized stack size parameter. To remediate this issue, users should upgrade to version 11.3.1 or later.
🎖@cveNotify
🚨 CVE-2026-77237
Missing queue-set type validation in xQueueAddToSet() in the FreeRTOS-Kernel before 11.3.1 might allow an unprivileged task on MPU-enabled ports with configUSE_QUEUE_SETS=1 to read privileged kernel memory. To remediate this issue, users should upgrade to version 11.3.1 or later.
🎖@cveNotify
Missing queue-set type validation in xQueueAddToSet() in the FreeRTOS-Kernel before 11.3.1 might allow an unprivileged task on MPU-enabled ports with configUSE_QUEUE_SETS=1 to read privileged kernel memory. To remediate this issue, users should upgrade to version 11.3.1 or later.
🎖@cveNotify
🚨 CVE-2026-35163
OctoPrint provides a web interface for controlling consumer 3D printers. Prior to 1.11.8 and 2.0.0rc3, Suppressed Command notification popups use PNotify rendering for printer-controlled payload.command and payload.message values in src/octoprint/static/js/app/viewmodels/terminal.js without HTML escaping. An attacker who convinces a victim to print a crafted file can inject HTML and JavaScript into the notification, disrupt prints, read information available to the victim including sensitive settings when permitted, or perform actions in the victim's OctoPrint session. This issue is fixed in versions 1.11.8 and 2.0.0rc3.
🎖@cveNotify
OctoPrint provides a web interface for controlling consumer 3D printers. Prior to 1.11.8 and 2.0.0rc3, Suppressed Command notification popups use PNotify rendering for printer-controlled payload.command and payload.message values in src/octoprint/static/js/app/viewmodels/terminal.js without HTML escaping. An attacker who convinces a victim to print a crafted file can inject HTML and JavaScript into the notification, disrupt prints, read information available to the victim including sensitive settings when permitted, or perform actions in the victim's OctoPrint session. This issue is fixed in versions 1.11.8 and 2.0.0rc3.
🎖@cveNotify
GitHub
fix(coreui): XSS in Suppressed Command Notifications · OctoPrint/OctoPrint@42e0f98
OctoPrint is the snappy web interface for your 3D printer! - fix(coreui): XSS in Suppressed Command Notifications · OctoPrint/OctoPrint@42e0f98
🚨 CVE-2026-54073
VeraCrypt provides disk encryption with strong security based on TrueCrypt. From 1.26.6 until 1.26.29, file-hosted hidden volume creation forces quick format and the FormatNoFs function in src/Common/Format.c and FormatFat function in src/Common/Fat.c use WriteFile to place raw zeroed sectors at predictable 128 MiB intervals. These writes bypass the normal EncryptDataUnits formatting path, leaving deterministic plaintext markers in an area expected to resemble random ciphertext. The markers can weaken plausible deniability during forensic inspection, although they do not disclose hidden-volume content or reduce the strength of VeraCrypt encryption. This issue is fixed in version 1.26.29.
🎖@cveNotify
VeraCrypt provides disk encryption with strong security based on TrueCrypt. From 1.26.6 until 1.26.29, file-hosted hidden volume creation forces quick format and the FormatNoFs function in src/Common/Format.c and FormatFat function in src/Common/Fat.c use WriteFile to place raw zeroed sectors at predictable 128 MiB intervals. These writes bypass the normal EncryptDataUnits formatting path, leaving deterministic plaintext markers in an area expected to resemble random ciphertext. The markers can weaken plausible deniability during forensic inspection, although they do not disclose hidden-volume content or reduce the strength of VeraCrypt encryption. This issue is fixed in version 1.26.29.
🎖@cveNotify
GitHub
Merge commit from fork · veracrypt/VeraCrypt@689a59c
Hidden volumes are forced to quick format to avoid rewriting the hidden data area. Keep that behavior while skipping the file-container allocation shortcut that writes plaintext zero sectors at 128...
🚨 CVE-2026-54681
DiscordChatExporter saves Discord chat logs to a file. Prior to 2.47.2, the VisitEmojiAsync method in DiscordChatExporter.Core/Exporting/HtmlMarkdownVisitor.cs interpolates emoji.Name into the alt attribute and emoji.Code into the title attribute without HTML entity encoding. This affects HTML exports regardless of the markdown setting. Discord's current custom emoji name validation normally excludes attribute-breaking characters, but tampered offline input, a relaxed upstream validation rule, or another future metadata source can inject an HTML attribute and execute script when a user opens the export. This issue is fixed in version 2.47.2.
🎖@cveNotify
DiscordChatExporter saves Discord chat logs to a file. Prior to 2.47.2, the VisitEmojiAsync method in DiscordChatExporter.Core/Exporting/HtmlMarkdownVisitor.cs interpolates emoji.Name into the alt attribute and emoji.Code into the title attribute without HTML entity encoding. This affects HTML exports regardless of the markdown setting. Discord's current custom emoji name validation normally excludes attribute-breaking characters, but tampered offline input, a relaxed upstream validation rule, or another future metadata source can inject an HTML attribute and execute script when a user opens the export. This issue is fixed in version 2.47.2.
🎖@cveNotify
GitHub
Implement missing HTML encoding for several attribute injections (#1544) · Tyrrrz/DiscordChatExporter@f4d1e63
Saves Discord chat logs to a file. Contribute to Tyrrrz/DiscordChatExporter development by creating an account on GitHub.
🚨 CVE-2026-55850
Element Web is a Matrix web client built using the Matrix React SDK. Prior to 1.12.22, EmbeddedPage in apps/web/src/components/structures/EmbeddedPage.tsx renders homeserver-supplied homepage content through dangerouslySetInnerHTML without passing it through sanitizedHtmlNode. A malicious homeserver can provide crafted HTML that Element Web renders on the homepage; the content security policy prevents JavaScript but not phishing HTML. This issue is fixed in version 1.12.22.
🎖@cveNotify
Element Web is a Matrix web client built using the Matrix React SDK. Prior to 1.12.22, EmbeddedPage in apps/web/src/components/structures/EmbeddedPage.tsx renders homeserver-supplied homepage content through dangerouslySetInnerHTML without passing it through sanitizedHtmlNode. A malicious homeserver can provide crafted HTML that Element Web renders on the homepage; the content security policy prevents JavaScript but not phishing HTML. This issue is fixed in version 1.12.22.
🎖@cveNotify
GitHub
Apply html utils sanitiser to embedded page (#33842) · element-hq/element-web@7949980
* Apply html utils sanitiser to embedded page
* Write tests
* Write tests
🚨 CVE-2026-63004
Unleash is an open-source feature management platform. Prior to 7.5.2, 7.6.5, and 8.0.2, the addon and integration subsystem passes the operator-controlled parameters.url value from src/lib/addons/webhook.ts and the Slack, Microsoft Teams, Datadog, and New Relic integrations to Addon.fetchRetry in src/lib/addons/addon.ts without restricting loopback, link-local, private, or cloud metadata addresses. An authenticated actor with the root CREATE_ADDON or UPDATE_ADDON permission can cause the server to send requests from inside its network boundary, use integration event status as a blind probing oracle, forward Authorization, customHeaders, or DD-API-KEY values to an attacker-observed host, and deliver the feature-event JSON body to internal services. This issue is fixed in versions 7.5.2, 7.6.5, and 8.0.2.
🎖@cveNotify
Unleash is an open-source feature management platform. Prior to 7.5.2, 7.6.5, and 8.0.2, the addon and integration subsystem passes the operator-controlled parameters.url value from src/lib/addons/webhook.ts and the Slack, Microsoft Teams, Datadog, and New Relic integrations to Addon.fetchRetry in src/lib/addons/addon.ts without restricting loopback, link-local, private, or cloud metadata addresses. An authenticated actor with the root CREATE_ADDON or UPDATE_ADDON permission can cause the server to send requests from inside its network boundary, use integration event status as a blind probing oracle, forward Authorization, customHeaders, or DD-API-KEY values to an attacker-observed host, and deliver the feature-event JSON body to internal services. This issue is fixed in versions 7.5.2, 7.6.5, and 8.0.2.
🎖@cveNotify
GitHub
fix: make addons accept allowlists and deny private ip by default (#1… · Unleash/unleash@2100db7
…2419)
## About the changes
We want to make sure that our addons do not indiscriminately call any
URL to avoid internal SSRF attacks.
So this PR adds a private URL filter which can be disabled w...
## About the changes
We want to make sure that our addons do not indiscriminately call any
URL to avoid internal SSRF attacks.
So this PR adds a private URL filter which can be disabled w...
🚨 CVE-2026-77795
A vulnerability was identified in Dromara RuoYi-Vue-Plus up to 5.6.2. This issue affects the function FlwInstanceController/FlwDefinitionController/FlwCategoryController/FlwSpelController/TestLeaveController of the component Workflow Endpoint. Such manipulation leads to improper authorization. The attack can be launched remotely.
🎖@cveNotify
A vulnerability was identified in Dromara RuoYi-Vue-Plus up to 5.6.2. This issue affects the function FlwInstanceController/FlwDefinitionController/FlwCategoryController/FlwSpelController/TestLeaveController of the component Workflow Endpoint. Such manipulation leads to improper authorization. The attack can be launched remotely.
🎖@cveNotify
GitHub
Incorrect Authorization of RuoYi Controller · Issue #1 · SunRisexyz/Vul-of-Ruoyi
CWE-863: Incorrect Authorization — Insufficient Fine-Grained Access Control Description The application implements coarse-grained authorization via @SaCheckPermission annotations on controller endp...
🚨 CVE-2026-27462
Combodo iTop is a web based IT service management tool. Prior to 3.2.3, iTop returns different responses for valid/invalid usernames depending on multiple factors in the reset password mechanism, leading to user enumeration. This issue has been fixed in version 3.2.3.
🎖@cveNotify
Combodo iTop is a web based IT service management tool. Prior to 3.2.3, iTop returns different responses for valid/invalid usernames depending on multiple factors in the reset password mechanism, leading to user enumeration. This issue has been fixed in version 3.2.3.
🎖@cveNotify
GitHub
N°8545 - Standardize return message from password reset (#812) · Combodo/iTop@9fd0ffd
* N°8545 - Standardize return message from password reset
* N°8545 - Change log severity depending on the error source
* Add copyrights
* Update application/loginwebpage.class.inc.php
Co-author...
* N°8545 - Change log severity depending on the error source
* Add copyrights
* Update application/loginwebpage.class.inc.php
Co-author...
🚨 CVE-2026-27463
Combodo iTop is a web based IT service management tool. Prior to 3.2.3, the HTML title attribute of the logo in the login page contains the complete iTop version. This issue has been fixed in version 3.2.3.
🎖@cveNotify
Combodo iTop is a web based IT service management tool. Prior to 3.2.3, the HTML title attribute of the logo in the login page contains the complete iTop version. This issue has been fixed in version 3.2.3.
🎖@cveNotify
GitHub
N°8541 - Replace login logo title with an alt customizable through di… · Combodo/iTop@d124f8e
…ctionary entry (#805)
🚨 CVE-2026-27490
Combodo iTop is a web based IT service management tool. Prior to 3.2.3, inline images that are accessible without being authenticated are protected by a weak 24-bit pseudo-random secret. This issue has been fixed in version 3.2.3.
🎖@cveNotify
Combodo iTop is a web based IT service management tool. Prior to 3.2.3, inline images that are accessible without being authenticated are protected by a weak 24-bit pseudo-random secret. This issue has been fixed in version 3.2.3.
🎖@cveNotify
GitHub
N°8549 - Update inline images secret (#815) · Combodo/iTop@9c39efd
A simple, web based CMDB & IT Service Management tool - N°8549 - Update inline images secret (#815) · Combodo/iTop@9c39efd
🚨 CVE-2026-30819
Combodo iTop is a web based IT service management tool. Prior to 3.2.3, iTop has a reflected Cross-Site Scripting (XSS) vulnerability in its dashboard revert functionality with the parameter dashboard_id in /pages/ajax.render.php. This issue has been fixed in version 3.2.3.
🎖@cveNotify
Combodo iTop is a web based IT service management tool. Prior to 3.2.3, iTop has a reflected Cross-Site Scripting (XSS) vulnerability in its dashboard revert functionality with the parameter dashboard_id in /pages/ajax.render.php. This issue has been fixed in version 3.2.3.
🎖@cveNotify
GitHub
N°9230 - Sanitize dashboard_id parameter in "revert_dashboard" operat… · Combodo/iTop@104dd19
…ion of AJAX render function (#828)
🚨 CVE-2026-30866
Combodo iTop is a web based IT service management tool. Prior to 3.2.3, unauthenticated users can access uploaded sensitive via sniffed url. This issue has been fixed in version 3.2.3.
🎖@cveNotify
Combodo iTop is a web based IT service management tool. Prior to 3.2.3, unauthenticated users can access uploaded sensitive via sniffed url. This issue has been fixed in version 3.2.3.
🎖@cveNotify
GitHub
N°8612 - force authentication for inline image endpoints · Combodo/iTop@458a996
- ajax.render dict route needs to be reached without login authentication