🚨 CVE-2026-19875
IBM Langflow OSS 1.0.0 through 1.10.0 could allow a remote attacker to overwrite administrator email information and abuse the server as an outbound relay due to missing authentication for the registration endpoint.

🎖@cveNotify

🚨 CVE-2026-32475
Unrestricted Upload of File with Dangerous Type vulnerability in Elementor Elementor Pro allows Using Malicious Files.

This issue affects Elementor Pro: from n/a through 4.2.1.

🎖@cveNotify

🚨 CVE-2026-55191
FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.27.0, FreeRDP clients that negotiate RDPGFX AVC444 with an H.264 decoder backend calculate the intermediate YUV444 allocation size in libfreerdp/codec/h264.c with 32-bit multiplication in avc444_ensure_buffer. A malicious RDP server can supply surface dimensions for which piDstStride multiplied by padDstHeight wraps to a small nonzero value, causing winpr_aligned_recalloc to allocate an undersized buffer before YUV420CombineToYUV444 writes using the actual stride and rectangle dimensions. This can cause a client crash and may permit code execution through attacker-influenced heap corruption. This issue is fixed in version 3.27.0.

🎖@cveNotify

🚨 CVE-2026-55193
FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.27.0, FreeRDP clients using TS Gateway accept a server-controlled max_xmit_frag value in libfreerdp/core/gateway/rpc_bind.c without bounding it to the 4088-byte ReceiveFragment allocation. A malicious gateway can advertise 65535 and then send a response fragment of the same length, causing rpc_channel_read in libfreerdp/core/gateway/rpc.c to write up to 65535 bytes into the smaller ReceiveFragment buffer. This can crash the client and may permit code execution through attacker-controlled heap corruption. This issue is fixed in version 3.27.0.

🎖@cveNotify

🚨 CVE-2026-55194
FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.27.0, rpc_client_recv_fragment in libfreerdp/core/gateway/rpc_client.c ensures the response reassembly stream capacity using only the server-declared alloc_hint rather than the actual StubLength about to be written. A malicious TS Gateway can send a PTYPE_RESPONSE with a small alloc_hint and a much larger frag_length, causing Stream_Write to copy attacker-controlled stub data beyond the 4096-byte pdu->s buffer. This can crash the client and may permit code execution through heap corruption. This issue is fixed in version 3.27.0.

🎖@cveNotify

🚨 CVE-2026-55564
FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.27.0, the glyph_cache_get function in libfreerdp/cache/glyph.c checks whether index is greater than cache->number instead of greater than or equal to it. A malicious RDP server can use GLYPH_FRAGMENT_USE replay in update_process_glyph_fragments to make the default cache receive index 254 when cache->number is 254, reading one pointer beyond the entries array and dereferencing it as a glyph. This can crash the client and may disclose adjacent heap data. This issue is fixed in version 3.27.0.

🎖@cveNotify

🚨 CVE-2026-55648
FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.27.0, freerdp_image_copy_from_icon_data in libfreerdp/codec/color.c calculates nWidth multiplied by nHeight multiplied by FreeRDPGetBytesPerPixel(format) in 32-bit arithmetic. A malicious RDP server can send a RAIL TS_ICON_INFO update with dimensions such as 32768 by 32768 and 32 bits per pixel so the required-size calculation wraps, bypassing the cbBitsColor source bounds check before freerdp_image_copy_no_overlap reads attacker-controlled icon data. This affects RemoteApp clients using the vulnerable library path, while xfreerdp has a caller-side mitigation. This issue is fixed in version 3.27.0.

🎖@cveNotify

🚨 CVE-2026-61518
ISPConfig contains an authenticated SQL injection vulnerability in the Remote API. The primary_id parameter passed to delete and update API methods is concatenated directly into SQL WHERE clauses without integer casting or parameterized query binding. The built-in SQL injection scanner does not block quote-free boolean payloads and does not reject requests in its default configuration. A remote API user holding any single low-privilege function permission can inject arbitrary SQL to delete or modify records across all tenants in the control panel database and extract arbitrary data via blind boolean inference, including password hashes and client records.

🎖@cveNotify

🚨 CVE-2026-62680
Orval generates type-safe JavaScript clients in TypeScript from OpenAPI v3 and Swagger v2 specifications. Prior to 8.22.0, Orval resolves remote and local external $ref values without an allowlist or confinement to the input directory. Processing an attacker-controlled OpenAPI description can cause requests from the developer or CI host to attacker-selected or internal HTTP services, read absolute or out-of-tree local files, and inline untrusted remote schemas into generated clients. The affected code is packages/orval/src/import-specs.ts external reference loading. This issue is fixed in version 8.22.0.

🎖@cveNotify

🚨 CVE-2026-62681
Orval generates type-safe JavaScript clients in TypeScript from OpenAPI v3 and Swagger v2 specifications. Prior to 8.21.0, an unescaped backtick in an OpenAPI path is emitted into request URL template literals generated for axios, fetch, react-query, and SWR clients without safe encoding. This permits attacker-controlled JavaScript to be evaluated when a generated request, URL-builder, or query-key function is called, resulting in code execution in the developer, CI, test, or application environment. The affected code is packages/core/src/getters/route.ts and route generation consumers. This issue is fixed in version 8.21.0.

🎖@cveNotify

🚨 CVE-2026-62682
Orval generates type-safe JavaScript clients in TypeScript from OpenAPI v3 and Swagger v2 specifications. Prior to 8.21.0, an unescaped backtick in servers[0].url is emitted into request URL template literals generated when output.baseUrl.getBaseUrlFromSpecification is enabled without safe encoding. This permits attacker-controlled JavaScript to be evaluated when a generated request or URL-builder function is called, resulting in code execution in the developer, CI, test, or application environment. The affected code is packages/core/src/getters/route.ts function getFullRoute. This issue is fixed in version 8.21.0.

🎖@cveNotify

🚨 CVE-2026-63117
FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.28.0, an authenticated RDP client can advertise DVI ADPCM with nBlockAlign equal to 8 and nChannels equal to 2 to make the `bs` calculation in rdpsnd_server_select_format in channels/rdpsnd/server/rdpsnd_main.c equal zero. The subsequent out_frames modulo `bs` operation raises SIGFPE and terminates the server-side rdpsnd channel process. This vulnerability fixed in 3.28.0.

🎖@cveNotify

🚨 CVE-2026-63633
FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.28.0, freerdp_dsp_decode_opus in libfreerdp/codec/dsp.c calls Stream_EnsureRemainingCapacity on context->common.buffer even though opus_decode writes decoded PCM into the caller-supplied out stream. A malicious RDP server that negotiates WAVE_FORMAT_OPUS with a client built with WITH_OPUS enabled and WITH_DSP_FFMPEG disabled can make libopus write a large decoded frame beyond the 4096-byte StreamPool_Take destination used by channels/rdpsnd/client/rdpsnd_main.c. This can corrupt the client heap, crash the client, and may permit code execution. This issue is fixed in version 3.28.0.

🎖@cveNotify

🚨 CVE-2026-63652
FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.28.0, rdpsnd_server_recv_formats in channels/rdpsnd/server/rdpsnd_main.c frees context->client_formats on a malformed Client Audio Formats PDU without clearing the owning pointer or num_client_formats. An authenticated RDP client can trigger an error such as a cbSize larger than the remaining record, leave the dangling pointer in the server context, and cause rdpsnd_server_context_free to free the same allocation again at session teardown. This reliably terminates the server and can create allocator-dependent heap corruption. This issue is fixed in version 3.28.0.

🎖@cveNotify

🚨 CVE-2026-66794
A flaw was found in the `cluster-proxy-addon` component of Multicluster Engine for Kubernetes. This vulnerability allows an unauthenticated attacker, who can access the user-facing route, to bypass authentication and authorization checks. By manipulating URL path segments, the attacker can proxy requests to arbitrary services across any managed cluster. This enables unauthorized access to internal services that would otherwise be protected, potentially leading to information disclosure or further compromise of the cluster environment.

🎖@cveNotify

🚨 CVE-2026-67581
Authentication Bypass by Capture-replay in ZenHive mpp allows an unauthenticated remote client to obtain paid resources by resubmitting one settled on-chain transfer.

MPP.Methods.EVM.verify/2 accepts a transaction-hash credential and matches a transfer purely on token, to and amount (ERC-20) or to and value (native). It binds the proof neither to the challenge being verified nor to any record of prior use, and the generic MPP.Plug dedup store keys on challenge.id, which is regenerated for every 402 response. On a static-price route, a single historical transfer matching the charge therefore satisfies an unbounded number of later charges, including transfers an attacker can read off a public block explorer.

This issue affects mpp: from 0.3.0 before 0.6.3.

🎖@cveNotify

🚨 CVE-2026-69159
FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.29.0, planar_decompress_plane_rle and planar_decompress_plane_rle_only in libfreerdp/codec/planar.c verify that a control byte exists but do not verify that the source buffer contains the zero to fifteen raw bytes declared by that control byte. A malicious RDP server can send a truncated planar bitmap or surface update whose final control byte claims additional raw bytes, causing the decoder to read beyond pSrcData while processing a color plane. This can crash the client and may disclose adjacent memory. This issue is fixed in version 3.29.0.

🎖@cveNotify

🚨 CVE-2026-71864
Orval generates type-safe JavaScript clients in TypeScript from OpenAPI v3 and Swagger v2 specifications. Prior to 8.21.0, a double quote in a header parameter name is emitted into the generated request-validation zod.object({...}) schema without safe encoding. This permits attacker-controlled JavaScript to be evaluated when the generated zod schema module is imported, resulting in code execution in the developer, CI, test, or application environment. The affected code is packages/zod/src/index.ts and header request-validation generation. This issue is fixed in version 8.21.0.

🎖@cveNotify

🚨 CVE-2026-71865
Orval generates type-safe JavaScript clients in TypeScript from OpenAPI v3 and Swagger v2 specifications. Prior to 8.21.0, a double quote in a query parameter name is emitted into the generated request-validation zod.object({...}) schema without safe encoding. This permits attacker-controlled JavaScript to be evaluated when the generated zod schema module is imported, resulting in code execution in the developer, CI, test, or application environment. The affected code is packages/zod/src/index.ts and query request-validation generation. This issue is fixed in version 8.21.0.

🎖@cveNotify

🚨 CVE-2026-71866
Orval generates type-safe JavaScript clients in TypeScript from OpenAPI v3 and Swagger v2 specifications. From version 8.19.0 until 8.21.0, a double quote in a schema property name is emitted into the generated zod.object({...}) schema without safe encoding. This permits attacker-controlled JavaScript to be evaluated when the generated zod schema module is imported, resulting in code execution in the developer, CI, test, or application environment. The affected code is packages/zod/src/index.ts and zod object-key generation. This issue is fixed in version 8.21.0.

🎖@cveNotify

🚨 CVE-2026-71867
Orval generates type-safe JavaScript clients in TypeScript from OpenAPI v3 and Swagger v2 specifications. Prior to 8.21.0, a single quote in a schema property name is emitted into single-quoted object keys in generated MSW mock factories without safe encoding. This permits attacker-controlled JavaScript to be evaluated when the generated mock factory is called by tests or an MSW handler, resulting in code execution in the developer, CI, test, or application environment. The affected code is packages/core/src/getters/keys.ts function getKey and MSW mock generation. This issue is fixed in version 8.21.0.

🎖@cveNotify