🚨 CVE-2026-44494
Axios is a promise based HTTP client for the browser and Node.js. From 1.0.0 to before 1.16.0, the Axios library is vulnerable to a Prototype Pollution "Gadget" attack that allows any Object.prototype pollution in the application's dependency tree to be escalated into a full Man-in-the-Middle (MITM) attack — intercepting, reading, and modifying all HTTP traffic including authentication credentials. The HTTP adapter at lib/adapters/http.js:670 reads config.proxy via standard property access, which traverses the prototype chain. Because proxy is not present in Axios defaults, the merged config object has no own proxy property, making it trivially injectable via prototype pollution. Once injected, setProxy() routes all HTTP requests through the attacker's proxy server. This vulnerability is fixed in 1.16.0.

🎖@cveNotify

🚨 CVE-2026-44495
Axios is a promise based HTTP client for the browser and Node.js. From 0.19.0 to before 0.31.1 and 1.15.2, Axios contains prototype-pollution gadgets in request config processing. If another vulnerability in the same JavaScript process has already polluted Object.prototype.transformResponse, affected Axios versions may treat that inherited value as request configuration or as an option validator. Axios does not itself create the prototype pollution. Exploitability requires a separate prototype-pollution vulnerability or equivalent attacker control over Object.prototype before Axios creates a request. This vulnerability is fixed in 0.31.1 and 1.15.2.

🎖@cveNotify

🚨 CVE-2026-44496
Axios is a promise based HTTP client for the browser and Node.js. Axios versions before 0.32.0 on the 0.x line and before 1.16.0 on the 1.x line build a regular expression from the configured XSRF cookie name without escaping regex metacharacters. In standard browser environments, an attacker who can influence the cookie name passed to axios can cause expensive regex backtracking while axios reads document.cookie. The practical impact is client-side availability degradation, such as freezing the affected browser tab while axios prepares a request. The issue does not affect ordinary Node.js HTTP adapter usage, React Native, or web workers, where axios does not read document.cookie. This vulnerability is fixed in 0.32.0 and 1.16.0.

🎖@cveNotify

🚨 CVE-2026-47162
Vim is an open source, command line text editor. Prior to version 9.2.0495, a Vimscript code injection vulnerability exists in s:NetrwBookHistSave() in the netrw plugin (runtime/pack/dist/opt/netrw/autoload/netrw.vim) when serializing browsed directory paths to the history file ~/.vim/.netrwhist. A directory name derived from the filesystem is interpolated into a single-quoted Vimscript string literal without escaping embedded single quotes, allowing a crafted directory name to break out of the string context and execute arbitrary Vimscript, including shell commands via system() and :!, the next time the history file is sourced. This issue has been patched in version 9.2.0495.

🎖@cveNotify

🚨 CVE-2026-12143
form-data is a library for creating readable multipart/form-data streams. In versions through 4.0.5, the `field` argument to `FormData#append` and the `filename` option are concatenated verbatim into the `Content-Disposition` header without escaping carriage return (CR), line feed (LF), or double-quote (") characters. An application that passes attacker-controlled data as a field name or filename (for example, an API gateway that turns JSON object keys into multipart field names) allows the attacker to terminate the header line and inject additional headers, or to smuggle entire additional multipart parts, into the request the application forwards to a backend. This can let the attacker add or override form fields (e.g. set `is_admin=true`) seen by the downstream parser. This is an instance of CWE-93 (CRLF injection). The fix escapes CR, LF, and `"` as `%0D`, `%0A`, and `%22` in field names and filenames, matching the serialization browsers use per the WHATWG HTML multipart/form-data encoding algorithm. Exploitation requires the consuming application to use untrusted input as a field name or filename; applications that use only fixed/trusted field names are not affected. Fixed in 2.5.6, 3.0.5, and 4.0.6.

🎖@cveNotify

🚨 CVE-2026-44990
ApostropheCMS is an open-source Node.js content management system, and sanitize-html provides a simple HTML sanitizer with a clear API. Under the default configuration, versions of `sanitize-html` prior to 2.17.4 can turn attacker-controlled content inside a disallowed `xmp` element into live HTML or JavaScript. This is a sanitizer bypass in the default `disallowedTagsMode: 'discard'` path and can lead to stored XSS in applications that render sanitized output back to users. Version 2.17.4 patches the issue.

🎖@cveNotify

🚨 CVE-2026-48779
ws is an open source WebSocket client and server for Node.js. All versions from 1.1.0 up to (but not including) 5.2.5, from 6.0.0 up to 6.2.4, from 7.0.0 up to 7.5.11, and from 8.0.0 up to 8.21.0 are affected by a memory exhaustion DoS vulnerability. A peer can send a high volume of exceptionally small fragments and data chunks, with modest network traffic, to force the remote peer into allocating and holding structural wrappers that consume far more memory than the default documented message-size limit, leading to process termination due to OOM. This issue has been fixed in versions 5.2.5, 6.2.4, 7.5.11, and 8.21.0.

🎖@cveNotify

🚨 CVE-2026-12151
Impact:
The undici WebSocket client enforces maxPayloadSize on the cumulative byte count of fragments in a message but does not enforce a limit on the number of fragments. A malicious WebSocket server can stream many small or empty continuation frames that each pass per-frame and cumulative-size validation, collectively causing unbounded memory growth in the client process. The result is memory exhaustion and a denial of service.

Affected applications are those using the undici WebSocket client (new WebSocket(...)) or the WebSocketStream API that can be induced to connect to an attacker-controlled or compromised WebSocket endpoint.

All releases starting at undici 6.17.0 are affected.

Patches: Upgrade to undici >= 6.26.0, >= 7.28.0, or >= 8.5.0. Workarounds:
No workaround is available. The fix must be applied through an upgrade.

🎖@cveNotify

🚨 CVE-2026-6734
Impact:
When using Socks5ProxyAgent, undici reuses a single connection pool across different origins without verifying that the pool's origin matches the requested origin. All requests are dispatched through the pool connected to the first origin, regardless of the intended destination.

This causes cross-origin request routing: credentials and request data intended for origin B are sent to origin A, responses from the wrong origin are trusted, and HTTPS requests may be silently downgraded to HTTP.

Impacted users are applications that use Socks5ProxyAgent (directly or via setGlobalDispatcher) and make requests to more than one origin.

This was introduced in undici 7.23.0 via PR #4385 and affects all versions through 8.1.0.

Patches:
Upgrade to undici v7.26.0 or v8.2.0.

Workarounds:
Use a separate Socks5ProxyAgent instance per origin, or avoid using Socks5ProxyAgent with multiple origins.

🎖@cveNotify

🚨 CVE-2026-9697
Impact:
undici's ProxyAgent silently drops the requestTls option when configured with a SOCKS5 proxy URI (socks5:// or socks://). The target HTTPS connection through the SOCKS5 tunnel falls back to Node's default trust store, ignoring user-configured ca, cert, key, rejectUnauthorized, and servername settings.

Applications that pin to an internal or corporate CA via requestTls.ca will, when their proxy URI is SOCKS5, get the default Mozilla CA bundle as the trust anchor instead. Any cert signed by any publicly-trusted CA for the target hostname is accepted, breaking the intended pin and enabling MITM read and tamper of the HTTPS exchange.

Affected applications are those that use undici's ProxyAgent (or Socks5ProxyAgent directly) with SOCKS5 AND rely on requestTls for TLS scope restriction. The bug was introduced in undici 7.23.0 when SOCKS5 support was added.

Patches:
Upgrade to undici v7.28.0 or v8.5.0.

Workarounds:
No workaround is available within the SOCKS5 path. If a SOCKS5 proxy with TLS scope restriction is required and an upgrade is not yet possible, route the traffic through an HTTP-proxy ProxyAgent instead, where requestTls is honored correctly.

🎖@cveNotify

🚨 CVE-2026-48746
vLLM is an inference and serving engine for large language models (LLMs). From 0.3.0 until 0.22.0, a vulnerability in ASGI web servers and starlette's trust on those web servers enables an authentication bypass of the OpenAI API AuthenticationMiddleware. It allows to use the API without providing the configured VLLM_API_KEY or --api-key. This vulnerability is fixed in 0.22.0.

🎖@cveNotify

🚨 CVE-2026-53016
In the Linux kernel, the following vulnerability has been resolved:

crypto: ccp - copy IV using skcipher ivsize

AF_ALG rfc3686-ctr-aes-ccp requests pass an 8-byte IV to the driver.

ccp_aes_complete() restores AES_BLOCK_SIZE bytes into the caller's IV
buffer while RFC3686 skciphers expose an 8-byte IV, so the restore
overruns the provided buffer.

Use crypto_skcipher_ivsize() to copy only the algorithm's IV length.

🎖@cveNotify

🚨 CVE-2026-53059
In the Linux kernel, the following vulnerability has been resolved:

dm log: fix out-of-bounds write due to region_count overflow

The local variable region_count in create_log_context() is declared as
unsigned int (32-bit), but dm_sector_div_up() returns sector_t (64-bit).
When a device-mapper target has a sufficiently large ti->len with a small
region_size, the division result can exceed UINT_MAX. The truncated
value is then used to calculate bitset_size, causing clean_bits,
sync_bits, and recovering_bits to be allocated far smaller than needed
for the actual number of regions.

Subsequent log operations (log_set_bit, log_clear_bit, log_test_bit) use
region indices derived from the full untruncated region space, causing
out-of-bounds writes to kernel heap memory allocated by vmalloc.

This can be reproduced by creating a mirror target whose region_count
overflows 32 bits:

dmsetup create bigzero --table '0 8589934594 zero'
dmsetup create mymirror --table '0 8589934594 mirror \
core 2 2 nosync 2 /dev/mapper/bigzero 0 \
/dev/mapper/bigzero 0'

The status output confirms the truncation (sync_count=1 instead of
4294967297, because 0x100000001 was truncated to 1):

$ dmsetup status mymirror
0 8589934594 mirror 2 254:1 254:1 1/4294967297 ...

This leads to a kernel crash in core_in_sync:

BUG: scheduling while atomic: (udev-worker)/9150/0x00000000
RIP: 0010:core_in_sync+0x14/0x30 [dm_log]
CR2: 0000000000000008
Fixing recursive fault but reboot is needed!

Fix by widening the local region_count to sector_t and adding an
explicit overflow check before the value is assigned to lc->region_count.

🎖@cveNotify

🚨 CVE-2026-13676
fast-uri versions 2.3.1 through 3.1.2 and 4.0.0 fail to canonicalize Unicode (IDN) hostnames for HTTP-family URLs. The IDN conversion path calls a helper that does not exist on the global URL constructor, silently leaving the host in its original Unicode form while normalize() and equal() still return values that differ from a WHATWG-compatible URL parser. Applications that use fast-uri to enforce host-based policy (denylists, loopback filtering, redirect validation, outbound proxy routing) before passing the same URL to Node's URL or fetch can be bypassed when the two implementations resolve the same input to different hosts. Patches: upgrade to fast-uri 3.1.3 for the 3.x line or 4.0.1 for the 4.x line. Workarounds: enforce host policy using the same URL parser used for the actual request, or reject non-ASCII hosts before policy checks.

🎖@cveNotify

🚨 CVE-2026-54369
acl before version 2.4.0 contains a symlink traversal vulnerability in the libacl pathname-based functions acl_get_file(), acl_set_file(), acl_extended_file(), and acl_delete_def_file() that allows local attackers to escalate privileges by replacing any pathname component with a symbolic link. Attackers who control any component of a pathname processed by a privileged caller can redirect ACL read or write operations to arbitrary files or directories, enabling unauthorized manipulation of access control lists and local privilege escalation.

🎖@cveNotify

🚨 CVE-2026-66370
URL Redirection to Untrusted Site ('Open Redirect') vulnerability in the HTML5 scrubber in rrrene html_sanitize_ex allows an unauthenticated remote attacker to retarget a form already on the rendering page and receive whatever the victim submits, including credentials, via the form and formaction attributes on an <input> element in sanitized HTML. HTML's form attribute associates an input with any form on the page by its id even when the input sits outside that form, and formaction on a submit control overrides the owning form's action. Neither attribute receives a scheme check, so an absolute cross-origin URL survives sanitizing.

No script executes. The scrubber allows neither form nor button, so the attacker cannot introduce a form of their own and the rendering page must already contain a form carrying an id.

This issue affects html_sanitize_ex: from 0.3.1 before 1.4.5 and from 1.5.0-rc.0 before 1.5.3.

🎖@cveNotify

🚨 CVE-2026-66829
URL Redirection to Untrusted Site ('Open Redirect') vulnerability in the HTML5 scrubber in rrrene html_sanitize_ex allows a remote attacker to force visitors of a page to navigate to a site of the attacker's choosing via a <meta http-equiv="refresh"> element in sanitized HTML. HtmlSanitizeEx.html5/1 keeps attacker-supplied <meta> elements in its output. A meta element acts on the whole document rather than on the fragment it was embedded in, so it can also declare document-wide directives such as Content-Security-Policy.

This is not cross-site scripting. Browsers do not navigate a meta refresh to a javascript: URL, so the uppercase JAVASCRIPT: filter bypass yields no script execution and none was demonstrated.

This issue affects html_sanitize_ex: from 0.3.1 before 1.4.5 and from 1.5.0-rc.0 before 1.5.3.

🎖@cveNotify

🚨 CVE-2026-66843
Inclusion of Functionality from Untrusted Control Sphere vulnerability in the HTML5 scrubber in rrrene html_sanitize_ex allows a remote attacker to load a document of their choosing into a trusted page via the data attribute of an <object> element in sanitized HTML. object is the one URI-bearing element in lib/html_sanitize_ex/scrubber/html5.ex never registered through allow_tag_with_uri_attributes/3, and its only guard is a prefix match on lowercase "javascript:", so mixed-case variants, data: URIs, protocol-relative URLs and same-origin paths all survive.

This is not unconditional cross-site scripting. A javascript: URL does not execute through <object data> in current browsers, data: documents load in an opaque origin, and host-origin script execution additionally requires the application to serve attacker-controlled content from a same-origin path.

This issue affects html_sanitize_ex: from 0.3.1 before 1.4.5 and from 1.5.0-rc.0 before 1.5.3.

🎖@cveNotify

🚨 CVE-2026-68747
Improper Neutralization of Special Elements in Output Used by a Downstream Component ('Injection') vulnerability in the CSS scrubber in rrrene html_sanitize_ex allows an unauthenticated remote attacker to inject CSS at-rules, including an import of a remote stylesheet, into a page served to other users. HtmlSanitizeEx.Scrubber.CSS.scrub/1 applies its property and value allowlist through a Regex.replace over substrings matching a property: value declaration pattern, so input that does not match that pattern is never inspected and is copied to the output unchanged. @import url(//attacker.example/style.css); survives, while the same URL inside a background: url(...) declaration is removed.

Element boundaries are resolved before the scrubber runs, so injected content does not escape the <style> element and no script executes.

This issue affects html_sanitize_ex: from 0.3.1 before 1.4.5 and from 1.5.0-rc.0 before 1.5.4.

🎖@cveNotify

🚨 CVE-2026-68749
Inefficient Regular Expression Complexity vulnerability in the CSS scrubber in rrrene html_sanitize_ex allows an unauthenticated remote attacker to exhaust server CPU via a long CSS declaration in sanitized HTML. The declaration regex in HtmlSanitizeEx.Scrubber.CSS.scrub/1 matches the property name with an unbounded greedy [-\w]+ followed by a mandatory :, so a long run of word characters not followed by a colon makes the engine give back one character at a time and retry the colon at every start offset. The work is quadratic in the length of the run, and no length cap is applied to the CSS handed to the scrubber. An 80 KB <style> body costs roughly 2.4 seconds of scheduler time, so a few concurrent requests saturate the BEAM scheduler pool and make the application unresponsive.

The impact is CPU exhaustion only. Nothing is read, modified or disclosed.

This issue affects html_sanitize_ex: from 0.3.1 before 1.4.5 and from 1.5.0-rc.0 before 1.5.3.

🎖@cveNotify

🚨 CVE-2026-68750
Inefficient Algorithmic Complexity vulnerability in the traversal engine in rrrene html_sanitize_ex allows an unauthenticated remote attacker to exhaust server CPU and memory via a flat run of sibling elements in sanitized HTML. The list clause of HtmlSanitizeEx.Traverser.traverse/2 recurses on the tail of a sibling list and then evaluates List.flatten([head] ++ tail) over the already flattened result, so every one of n siblings copies and re-walks the entire remaining tail. The flattening is only needed for the rare case where scrub returns several replacement nodes for one node, but the cost is paid across the whole tail at every step, making traversal quadratic in sibling count.

The traverser sits on every public entry point, so no particular scrubber or configuration is required and the payload needs only allowed tags. A 160 KB body of 20,000 sibling elements occupies a scheduler for roughly 1.7 seconds, and the cost grows faster than the body does.

This issue affects html_sanitize_ex: from 0.3.1 before 1.4.5 and from 1.5.0-rc.0 before 1.5.3.

🎖@cveNotify