🚨 CVE-2026-46384
iskorotkov/avro is a fast Go Avro codec. Prior to 2.33.0, several Avro decoder paths read attacker-controlled 64-bit values from the wire format and either narrowed them to platform-sized int before bounds-checking, or summed them with overflow-prone signed-int arithmetic. On 32-bit targets (GOARCH=386, arm, mips, wasm, etc.), the truncation paths can silently bypass byte-slice limits, select the wrong union branch, or hit the OCF negative-make panic via wrap. Three sub-issues are not 32-bit-specific: cumulative-size arithmetic overflow in arrayDecoder.Decode / mapDecoder.Decode / mapDecoderUnmarshaler.Decode (wraps at math.MaxInt64 on amd64 / arm64 and bypasses MaxSliceAllocSize / MaxMapAllocSize), math.MinInt negation in block-header handling, and make([]byte, size) with a negative size in OCF block reads — all three panic or bypass caps on any platform, giving an attacker a denial-of-service primitive there. This vulnerability is fixed in 2.33.0.

🎖@cveNotify

🚨 CVE-2026-46385
iskorotkov/avro is a fast Go Avro codec. Prior to 2.33.0, the Avro array and map decoders looped over an attacker-controlled block-count value without checking the underlying reader's error state inside the loop body. Reader.ReadBlockHeader returns the count as a Go int, which is 64-bit on amd64 / arm64 targets — so a producer can declare a block of up to math.MaxInt64 (~9.2 × 10¹⁸) elements followed by EOF (or any truncated payload), and the decoder will attempt that many no-op iterations before propagating the error. The realistic ceiling is "indefinite until the worker is killed externally" — a single hostile payload pins a CPU core until the process is OOM-killed, deadline-cancelled, or terminated. Remote, unauthenticated denial-of-service. This vulnerability is fixed in 2.33.0.

🎖@cveNotify

🚨 CVE-2026-8643
pip would treat console_scripts and gui_scripts as paths instead of file names without sanitizing the resolved absolute path to the installation directory, leading to entry points being installed outside the installation directory.

🎖@cveNotify

🚨 CVE-2026-1784
The Route OpenShift resource allows to define routes to make pods reachable at a subdomain through HAProxy. It was found that the checks performed on the spec.path YAML stanza in a Route document was insufficient and could allow a controlled injection of the HAProxy configuration.

🎖@cveNotify

🚨 CVE-2026-27145
(*x509.Certificate).VerifyHostname previously called matchHostnames in a loop over all DNS Subject Alternative Name (SAN) entries. This caused strings.Split(host, ".") to execute repeatedly on the same input hostname. With a large DNS SAN list, verification costs scaled quadratically based on the number of SAN entries multiplied by the hostname's label count. Because x509.Verify validates hostnames before building the certificate chain, this overhead occurred even for untrusted certificates.

🎖@cveNotify

🚨 CVE-2026-5241
A vulnerability in the LightGlue model loading path of huggingface/transformers version 5.2.0 allows an attacker-controlled model repository to execute arbitrary code during model initialization. The issue arises because the `trust_remote_code` parameter, intended to prevent remote code execution, is overridden by untrusted serialized configuration data in a nested code path. Specifically, when loading a LightGlue model using `AutoModel.from_pretrained()` with `trust_remote_code=False`, the `LightGlueConfig` reads the `trust_remote_code` value from the untrusted `config.json` file and propagates it into nested `AutoConfig.from_pretrained()` calls. This results in the execution of attacker-provided Python modules, even when the victim explicitly disables remote code execution. The vulnerability poses a high risk for environments such as API inference servers, research notebooks, CI/CD pipelines, and model evaluation workers, potentially leading to credential theft, lateral movement, or persistence/backdoor deployment.

🎖@cveNotify

🚨 CVE-2026-46244
In the Linux kernel, the following vulnerability has been resolved:

netfilter: nft_inner: Fix IPv6 inner_thoff desync

In nft_inner_parse_l2l3(), when processing inner IPv6 packets,
ipv6_find_hdr() correctly computes the transport header offset
traversing all extension headers, but the result is immediately
overwritten with nhoff + sizeof(_ip6h) (40 bytes), which only
accounts for the IPv6 base header. This creates a desync between
inner_thoff (wrong — points to extension header start) and l4proto
(correct — e.g., IPPROTO_TCP), enabling transport header forgery
and potential firewall bypass. This issue affects stable versions
from Linux 6.2.

For comparison, the normal (non-inner) IPv6 path correctly
preserves ipv6_find_hdr()'s result. Removing the incorrect overwrite
ensures that ipv6_find_hdr()'s calculated transport header offset is
preserved, thereby fixing the desynchronization.

🎖@cveNotify

🚨 CVE-2026-49975
Memory Allocation with Excessive Size Value vulnerability in Apache HTTP Server's mod_http leads to denial of service via malicious HTTP requests.

This issue affects Apache HTTP Server: from 2.4.17 through 2.4.67.

🎖@cveNotify

🚨 CVE-2026-46625
JavaScript Cookie is a JavaScript API for handling cookies, client-side. Prior to version 3.0.7, js-cookie's internal assign() helper copies properties with for...in + plain assignment. When the source object is produced by JSON.parse, the JSON object's "__proto__" member is an own enumerable property, so the for…in enumerates it and the target[key] = source[key] write triggers the Object.prototype.__proto__ setter on the fresh target ({}). The result is a per-instance prototype hijack: Object.prototype itself is untouched, but the merged attributes object now inherits attacker-controlled keys. Because the consuming set() function then enumerates the merged object with another for...in, every key the attacker placed on the polluted prototype lands in the resulting Set-Cookie string as an attribute pair. The attacker can set domain=, secure=, samesite=, expires=, and path= on cookies whose attributes the developer thought were locked down. This issue has been patched in version 3.0.7.

🎖@cveNotify

🚨 CVE-2026-44486
Axios is a promise based HTTP client for the browser and Node.js. Prior to 0.32.0 and 1.16.0, Axios’ Node.js HTTP adapter can leak proxy credentials to a redirect target in affected versions. When a request is sent through an authenticated proxy, Axios may add a Proxy-Authorization header. If Axios then follows a redirect and the redirected request is no longer sent through that proxy, the stale Proxy-Authorization header can remain on the redirected request and be sent to the redirect target. This affects Node.js's use of Axios with automatic redirects enabled and an authenticated proxy configuration. Browser adapters are not affected. This vulnerability is fixed in 0.32.0 and 1.16.0.

🎖@cveNotify

🚨 CVE-2026-44487
Axios is a promise based HTTP client for the browser and Node.js. Prior to 0.32.0 and 1.16.0, Axios’s Node.js HTTP adapter may forward a Proxy-Authorization header to a redirected origin during specific proxy-to-direct redirect flows. This affects Node.js usage, where an initial HTTP request is sent through an authenticated HTTP proxy, redirects are followed, and the redirected URL is no longer proxied. Under affected redirect shapes, the final origin can receive the proxy credential that was intended only for the outbound proxy. This vulnerability is fixed in 0.32.0 and 1.16.0.

🎖@cveNotify

🚨 CVE-2026-44488
Axios is a promise based HTTP client for the browser and Node.js. Axios versions 1.7.0 through 1.15.x did not enforce configured request and response size limits when requests were sent with the fetch adapter. Applications that selected adapter: 'fetch', or ran in environments where axios resolved to the fetch adapter, could receive or send bodies larger than maxContentLength or maxBodyLength despite those limits being explicitly configured. This can cause resource exhaustion in server-side usage when a malicious or compromised server returns an oversized response, when an attacker can supply a large data: URL, or when an application forwards attacker-controlled request bodies through axios while relying on maxBodyLength as a boundary. This vulnerability is fixed in 0.32.0 and 1.16.0.

🎖@cveNotify

🚨 CVE-2026-44492
Axios is a promise based HTTP client for the browser and Node.js. Prior to 0.32.0 and 1.16.0, Axios does not normalise IPv4-mapped IPv6 addresses. When NO_PROXY lists an IPv4 address such as 127.0.0.1 or 169.254.169.254, a request URL using the IPv4-mapped IPv6 form (::ffff:7f00:1, ::ffff:a9fe:a9fe) still routes through the configured proxy. Node.js resolves these addresses to the underlying IPv4 host, so the request reaches the internal service via the proxy rather than being blocked. This vulnerability is fixed in 0.32.0 and 1.16.0.

🎖@cveNotify

🚨 CVE-2026-44494
Axios is a promise based HTTP client for the browser and Node.js. From 1.0.0 to before 1.16.0, the Axios library is vulnerable to a Prototype Pollution "Gadget" attack that allows any Object.prototype pollution in the application's dependency tree to be escalated into a full Man-in-the-Middle (MITM) attack — intercepting, reading, and modifying all HTTP traffic including authentication credentials. The HTTP adapter at lib/adapters/http.js:670 reads config.proxy via standard property access, which traverses the prototype chain. Because proxy is not present in Axios defaults, the merged config object has no own proxy property, making it trivially injectable via prototype pollution. Once injected, setProxy() routes all HTTP requests through the attacker's proxy server. This vulnerability is fixed in 1.16.0.

🎖@cveNotify

🚨 CVE-2026-44495
Axios is a promise based HTTP client for the browser and Node.js. From 0.19.0 to before 0.31.1 and 1.15.2, Axios contains prototype-pollution gadgets in request config processing. If another vulnerability in the same JavaScript process has already polluted Object.prototype.transformResponse, affected Axios versions may treat that inherited value as request configuration or as an option validator. Axios does not itself create the prototype pollution. Exploitability requires a separate prototype-pollution vulnerability or equivalent attacker control over Object.prototype before Axios creates a request. This vulnerability is fixed in 0.31.1 and 1.15.2.

🎖@cveNotify

🚨 CVE-2026-44496
Axios is a promise based HTTP client for the browser and Node.js. Axios versions before 0.32.0 on the 0.x line and before 1.16.0 on the 1.x line build a regular expression from the configured XSRF cookie name without escaping regex metacharacters. In standard browser environments, an attacker who can influence the cookie name passed to axios can cause expensive regex backtracking while axios reads document.cookie. The practical impact is client-side availability degradation, such as freezing the affected browser tab while axios prepares a request. The issue does not affect ordinary Node.js HTTP adapter usage, React Native, or web workers, where axios does not read document.cookie. This vulnerability is fixed in 0.32.0 and 1.16.0.

🎖@cveNotify

🚨 CVE-2026-47162
Vim is an open source, command line text editor. Prior to version 9.2.0495, a Vimscript code injection vulnerability exists in s:NetrwBookHistSave() in the netrw plugin (runtime/pack/dist/opt/netrw/autoload/netrw.vim) when serializing browsed directory paths to the history file ~/.vim/.netrwhist. A directory name derived from the filesystem is interpolated into a single-quoted Vimscript string literal without escaping embedded single quotes, allowing a crafted directory name to break out of the string context and execute arbitrary Vimscript, including shell commands via system() and :!, the next time the history file is sourced. This issue has been patched in version 9.2.0495.

🎖@cveNotify

🚨 CVE-2026-12143
form-data is a library for creating readable multipart/form-data streams. In versions through 4.0.5, the `field` argument to `FormData#append` and the `filename` option are concatenated verbatim into the `Content-Disposition` header without escaping carriage return (CR), line feed (LF), or double-quote (") characters. An application that passes attacker-controlled data as a field name or filename (for example, an API gateway that turns JSON object keys into multipart field names) allows the attacker to terminate the header line and inject additional headers, or to smuggle entire additional multipart parts, into the request the application forwards to a backend. This can let the attacker add or override form fields (e.g. set `is_admin=true`) seen by the downstream parser. This is an instance of CWE-93 (CRLF injection). The fix escapes CR, LF, and `"` as `%0D`, `%0A`, and `%22` in field names and filenames, matching the serialization browsers use per the WHATWG HTML multipart/form-data encoding algorithm. Exploitation requires the consuming application to use untrusted input as a field name or filename; applications that use only fixed/trusted field names are not affected. Fixed in 2.5.6, 3.0.5, and 4.0.6.

🎖@cveNotify

🚨 CVE-2026-44990
ApostropheCMS is an open-source Node.js content management system, and sanitize-html provides a simple HTML sanitizer with a clear API. Under the default configuration, versions of `sanitize-html` prior to 2.17.4 can turn attacker-controlled content inside a disallowed `xmp` element into live HTML or JavaScript. This is a sanitizer bypass in the default `disallowedTagsMode: 'discard'` path and can lead to stored XSS in applications that render sanitized output back to users. Version 2.17.4 patches the issue.

🎖@cveNotify

🚨 CVE-2026-48779
ws is an open source WebSocket client and server for Node.js. All versions from 1.1.0 up to (but not including) 5.2.5, from 6.0.0 up to 6.2.4, from 7.0.0 up to 7.5.11, and from 8.0.0 up to 8.21.0 are affected by a memory exhaustion DoS vulnerability. A peer can send a high volume of exceptionally small fragments and data chunks, with modest network traffic, to force the remote peer into allocating and holding structural wrappers that consume far more memory than the default documented message-size limit, leading to process termination due to OOM. This issue has been fixed in versions 5.2.5, 6.2.4, 7.5.11, and 8.21.0.

🎖@cveNotify

🚨 CVE-2026-12151
Impact:
The undici WebSocket client enforces maxPayloadSize on the cumulative byte count of fragments in a message but does not enforce a limit on the number of fragments. A malicious WebSocket server can stream many small or empty continuation frames that each pass per-frame and cumulative-size validation, collectively causing unbounded memory growth in the client process. The result is memory exhaustion and a denial of service.

Affected applications are those using the undici WebSocket client (new WebSocket(...)) or the WebSocketStream API that can be induced to connect to an attacker-controlled or compromised WebSocket endpoint.

All releases starting at undici 6.17.0 are affected.

Patches: Upgrade to undici >= 6.26.0, >= 7.28.0, or >= 8.5.0. Workarounds:
No workaround is available. The fix must be applied through an upgrade.

🎖@cveNotify