🚨 CVE-2026-43038
In the Linux kernel, the following vulnerability has been resolved:

ipv6: icmp: clear skb2->cb[] in ip6_err_gen_icmpv6_unreach()

Sashiko AI-review observed:

In ip6_err_gen_icmpv6_unreach(), the skb is an outer IPv4 ICMP error packet
where its cb contains an IPv4 inet_skb_parm. When skb is cloned into skb2
and passed to icmp6_send(), it uses IP6CB(skb2).

IP6CB interprets the IPv4 inet_skb_parm as an inet6_skb_parm. The cipso
offset in inet_skb_parm.opt directly overlaps with dsthao in inet6_skb_parm
at offset 18.

If an attacker sends a forged ICMPv4 error with a CIPSO IP option, dsthao
would be a non-zero offset. Inside icmp6_send(), mip6_addr_swap() is called
and uses ipv6_find_tlv(skb, opt->dsthao, IPV6_TLV_HAO).

This would scan the inner, attacker-controlled IPv6 packet starting at that
offset, potentially returning a fake TLV without checking if the remaining
packet length can hold the full 18-byte struct ipv6_destopt_hao.

Could mip6_addr_swap() then perform a 16-byte swap that extends past the end
of the packet data into skb_shared_info?

Should the cb array also be cleared in ip6_err_gen_icmpv6_unreach() and
ip6ip6_err() to prevent this?

This patch implements the first suggestion.

I am not sure if ip6ip6_err() needs to be changed.
A separate patch would be better anyway.

🎖@cveNotify

🚨 CVE-2026-42151
Prometheus is an open-source monitoring system and time series database. Prior to versions 3.5.3 and 3.11.3, the client_secret field in the Azure AD remote write OAuth configuration (storage/remote/azuread) was typed as string instead of Secret. Prometheus redacts fields of type Secret when serving the configuration via the /-/config HTTP API endpoint. Because the field was a plain string, the Azure OAuth client secret was exposed in plaintext to any user or process with access to that endpoint. This issue has been patched in versions 3.5.3 and 3.11.3.

🎖@cveNotify

🚨 CVE-2026-42154
Prometheus is an open-source monitoring system and time series database. Prior to versions 3.5.3 and 3.11.3, the remote read endpoint (/api/v1/read) does not validate the declared decoded length in a snappy-compressed request body before allocating memory. An unauthenticated attacker can send a small payload that causes a huge heap allocation per request. Under concurrent load this can exhaust available memory and crash the Prometheus process. This issue has been patched in versions 3.5.3 and 3.11.3.

🎖@cveNotify

🚨 CVE-2026-6321
fast-uri decoded percent-encoded path separators and dot segments before applying dot-segment removal in its normalize() and equal() functions. Encoded path data was treated like real slashes and parent-directory references, so distinct URIs could collapse onto the same normalized path. Applications that normalize or compare attacker-controlled URLs to enforce path-based policy can be bypassed, with a path that appears confined under an allowed prefix normalizing to a different location. Versions <= 3.1.0 are affected. Update to 3.1.1 or later.

🎖@cveNotify

🚨 CVE-2026-6322
fast-uri normalize() decoded percent-encoded authority delimiters inside the host component and then re-emitted them as raw delimiters during serialization. A host that combined an allowed domain, an encoded at-sign, and a different domain was re-emitted with the at-sign as a raw userinfo separator, changing the URI's authority to the second domain. Applications that normalize untrusted URLs before host allowlist checks, redirect validation, or outbound request routing can be steered to a different authority than the input appeared to specify. Versions <= 3.1.1 are affected. Update to 3.1.2 or later.

🎖@cveNotify

🚨 CVE-2026-43112
In the Linux kernel, the following vulnerability has been resolved:

fs/smb/client: fix out-of-bounds read in cifs_sanitize_prepath

When cifs_sanitize_prepath is called with an empty string or a string
containing only delimiters (e.g., "/"), the current logic attempts to
check *(cursor2 - 1) before cursor2 has advanced. This results in an
out-of-bounds read.

This patch adds an early exit check after stripping prepended
delimiters. If no path content remains, the function returns NULL.

The bug was identified via manual audit and verified using a
standalone test case compiled with AddressSanitizer, which
triggered a SEGV on affected inputs.

🎖@cveNotify

🚨 CVE-2026-43125
In the Linux kernel, the following vulnerability has been resolved:

dlm: validate length in dlm_search_rsb_tree

The len parameter in dlm_dump_rsb_name() is not validated and comes
from network messages. When it exceeds DLM_RESNAME_MAXLEN, it can
cause out-of-bounds write in dlm_search_rsb_tree().

Add length validation to prevent potential buffer overflow.

🎖@cveNotify

🚨 CVE-2026-41672
xmldom is a pure JavaScript W3C standard-based (XML DOM Level 2 Core) `DOMParser` and `XMLSerializer` module. In @xmldom/xmldom prior to versions 0.9.10 and 0.8.13 and xmldom version 0.6.0 and prior, the package allows attacker-controlled comment content to be serialized into XML without validating or neutralizing comment-breaking sequences. As a result, an attacker can terminate the comment early and inject arbitrary XML nodes into the serialized output. This issue has been patched in versions @xmldom/xmldom versions 0.9.10 and 0.8.13.

🎖@cveNotify

🚨 CVE-2026-41675
xmldom is a pure JavaScript W3C standard-based (XML DOM Level 2 Core) `DOMParser` and `XMLSerializer` module. In @xmldom/xmldom prior to versions 0.9.10 and 0.8.13 and xmldom version 0.6.0 and prior, the package allows attacker-controlled processing instruction data to be serialized into XML without validating or neutralizing the PI-closing sequence ?>. As a result, an attacker can terminate the processing instruction early and inject arbitrary XML nodes into the serialized output. This issue has been patched in versions @xmldom/xmldom versions 0.9.10 and 0.8.13.

🎖@cveNotify

🚨 CVE-2026-33814
When processing HTTP/2 SETTINGS frames, transport will enter an infinite loop of writing CONTINUATION frames if it receives a SETTINGS_MAX_FRAME_SIZE with a value of 0.

🎖@cveNotify

🚨 CVE-2026-39820
Well-crafted inputs reaching ParseAddress, ParseAddressList, and ParseDate were able to trigger excessive CPU exhaustion and memory allocations.

🎖@cveNotify

🚨 CVE-2026-42499
Pathological inputs could cause DoS through consumePhrase when parsing an email address according to RFC 5322.

🎖@cveNotify

🚨 CVE-2026-42264
Axios is a promise based HTTP client for the browser and Node.js. From version 1.0.0 to before version 1.15.2, fFive config properties (auth, baseURL, socketPath, beforeRedirect, and insecureHTTPParser) in the HTTP adapter are read via direct property access without hasOwnProperty guards, making them exploitable as prototype pollution gadgets. When Object.prototype is polluted by another dependency in the same process, axios silently picks up these polluted values on every outbound HTTP request. This issue has been patched in version 1.15.2.

🎖@cveNotify

🚨 CVE-2026-43329
In the Linux kernel, the following vulnerability has been resolved:

netfilter: flowtable: strictly check for maximum number of actions

The maximum number of flowtable hardware offload actions in IPv6 is:

* ethernet mangling (4 payload actions, 2 for each ethernet address)
* SNAT (4 payload actions)
* DNAT (4 payload actions)
* Double VLAN (4 vlan actions, 2 for popping vlan, and 2 for pushing)
for QinQ.
* Redirect (1 action)

Which makes 17, while the maximum is 16. But act_ct supports for tunnels
actions too. Note that payload action operates at 32-bit word level, so
mangling an IPv6 address takes 4 payload actions.

Update flow_action_entry_next() calls to check for the maximum number of
supported actions.

While at it, rise the maximum number of actions per flow from 16 to 24
so this works fine with IPv6 setups.

🎖@cveNotify

🚨 CVE-2026-42338
ip-address is a library for parsing and manipulating IPv4 and IPv6 addresses in JavaScript. Prior to 10.1.1, Address6.group() and Address6.link() do not HTML-escape attacker-controlled content before embedding it in the HTML strings they return, and AddressError.parseMessage (emitted by the Address6 constructor for invalid input) can contain unescaped attacker-controlled content in one branch. An application that (1) passes untrusted input to Address6 and (2) renders the output of these methods, or the thrown error's parseMessage, as HTML (e.g. via innerHTML) is vulnerable to cross-site scripting. This vulnerability is fixed in 10.1.1.

🎖@cveNotify

🚨 CVE-2026-44293
protobufjs compiles protobuf definitions into JavaScript (JS) functions. Prior to 7.5.6 and 8.0.2, protobufjs generated JavaScript for toObject conversion could include an unsafe expression derived from a schema-controlled bytes field default value. A crafted descriptor with a non-string default value for a bytes field could cause attacker-controlled code to be emitted into the generated conversion function. This vulnerability is fixed in 7.5.6 and 8.0.2.

🎖@cveNotify

🚨 CVE-2026-44432
urllib3 is an HTTP client library for Python. From 2.6.0 to before 2.7.0, urllib3 could decompress the whole response instead of the requested portion (1) during the second HTTPResponse.read(amt=N) call when the response was decompressed using the official Brotli library or (2) when HTTPResponse.drain_conn() was called after the response had been read and decompressed partially (compression algorithm did not matter here). These issues could cause urllib3 to fully decode a small amount of highly compressed data in a single operation. This could result in excessive resource consumption (high CPU usage and massive memory allocation for the decompressed data) on the client side. This vulnerability is fixed in 2.7.0.

🎖@cveNotify

🚨 CVE-2025-54518
Improper isolation of shared resources within the CPU operation cache on Zen 2-based products could allow an attacker to corrupt instructions executed at a different privilege level, potentially resulting in privilege escalation.

🎖@cveNotify

🚨 CVE-2026-41292
NLnet Labs Unbound up to and including version 1.25.0 is vulnerable to a degradation of service attack related to parsing long lists of incoming EDNS options. An adversary sending queries with too many EDNS options can hold Unbound threads hostage while they are parsing and creating internal data structures for the options. Coordinated attacks can result in degradation and/or denial of service. Unbound 1.25.1 contains a patch with a fix to limit acceptable incoming EDNS options (100).

🎖@cveNotify

🚨 CVE-2026-29518
Rsync versions before 3.4.3 contain a time-of-check to time-of-use (TOCTOU) race condition in daemon file handling that allows attackers to redirect file writes outside intended directories by replacing parent directory components with symbolic links. Attackers with write access to a module path can exploit this race condition to create or overwrite arbitrary files, potentially modifying sensitive system files and achieving privilege escalation when the daemon runs with elevated privileges. This vulnerability can only be triggered if the chroot setting is false.

🎖@cveNotify

🚨 CVE-2026-39828
When an SSH server authentication callback returned PartialSuccessError with non-nil Permissions, those permissions were silently discarded, potentially dropping certificate restrictions such as force-command after a second factor succeeded. Returning non-nil Permissions with PartialSuccessError now results in a connection error.

🎖@cveNotify