🚨 CVE-2026-40175
Axios is a promise based HTTP client for the browser and Node.js. Versions prior to 1.15.0 and 0.3.1 are vulnerable to a specific gadget-style attack chain in which prototype pollution in a third-party dependency may be leveraged to inject unsanitized header values into outbound requests. This vulnerability is fixed in 1.15.0 and 0.3.1.

🎖@cveNotify

🚨 CVE-2026-35469
spdystream is a Go library for multiplexing streams over SPDY connections. In versions 0.5.0 and below, the SPDY/3 frame parser does not validate attacker-controlled counts and lengths before allocating memory. Three allocation paths are affected: the SETTINGS frame entry count, the header count in parseHeaderValueBlock, and individual header field sizes — all read as 32-bit integers and used directly as allocation sizes with no bounds checking. Because SPDY header blocks are zlib-compressed, a small on-the-wire payload can decompress into large attacker-controlled values. A remote peer that can send SPDY frames to a service using spdystream can exhaust process memory and cause an out-of-memory crash with a single crafted control frame. This issue has been fixed in version 0.5.1.

🎖@cveNotify

🚨 CVE-2026-40895
follow-redirects is an open source, drop-in replacement for Node's `http` and `https` modules that automatically follows redirects. Prior to 1.16.0, when an HTTP request follows a cross-domain redirect (301/302/307/308), follow-redirects only strips authorization, proxy-authorization, and cookie headers (matched by regex at index.js). Any custom authentication header (e.g., X-API-Key, X-Auth-Token, Api-Key, Token) is forwarded verbatim to the redirect target. This vulnerability is fixed in 1.16.0.

🎖@cveNotify

🚨 CVE-2026-6846
A flaw was found in binutils. A heap-buffer-overflow vulnerability exists when processing a specially crafted XCOFF (Extended Common Object File Format) object file during linking. A local attacker could trick a user into processing this malicious file, which could lead to arbitrary code execution, allowing the attacker to run unauthorized commands, or cause a denial of service, making the system unavailable.

🎖@cveNotify

🚨 CVE-2026-42033
Axios is a promise based HTTP client for the browser and Node.js. Prior to 1.15.1 and 0.31.1, when Object.prototype has been polluted by any co-dependency with keys that axios reads without a hasOwnProperty guard, an attacker can (a) silently intercept and modify every JSON response before the application sees it, or (b) fully hijack the underlying HTTP transport, gaining access to request credentials, headers, and body. The precondition is prototype pollution from a separate source in the same process. This vulnerability is fixed in 1.15.1 and 0.31.1.

🎖@cveNotify

🚨 CVE-2026-42039
Axios is a promise based HTTP client for the browser and Node.js. Prior to 1.15.1 and 0.31.1, toFormData recursively walks nested objects with no depth limit, so a deeply nested value passed as request data crashes the Node.js process with a RangeError. This vulnerability is fixed in 1.15.1 and 0.31.1.

🎖@cveNotify

🚨 CVE-2026-42041
Axios is a promise based HTTP client for the browser and Node.js. Prior to 1.15.1 and 0.31.1, the Axios library is vulnerable to a Prototype Pollution "Gadget" attack that allows any Object.prototype pollution to silently suppress all HTTP error responses (401, 403, 500, etc.), causing them to be treated as successful responses. This completely bypasses application-level authentication and error handling. The root cause is that validateStatus is the only config property using the mergeDirectKeys merge strategy, which uses JavaScript's in operator — an operator that inherently traverses the prototype chain. When Object.prototype.validateStatus is polluted with () => true, all HTTP status codes are accepted as success. This vulnerability is fixed in 1.15.1 and 0.31.1.

🎖@cveNotify

🚨 CVE-2026-42043
Axios is a promise based HTTP client for the browser and Node.js. Prior to 1.15.1 and 0.31.1, an attacker who can influence the target URL of an Axios request can use any address in the 127.0.0.0/8 range (other than 127.0.0.1) to completely bypass the NO_PROXY protection. This vulnerability is due to an incomplete for CVE-2025-62718, This vulnerability is fixed in 1.15.1 and 0.31.1.

🎖@cveNotify

🚨 CVE-2026-42044
Axios is a promise based HTTP client for the browser and Node.js. From 1.0.0 to before 1.15.2, he Axios library is vulnerable to a Prototype Pollution "Gadget" attack that allows any Object.prototype pollution in the application's dependency tree to be escalated into surgical, invisible modification of all JSON API responses — including privilege escalation, balance manipulation, and authorization bypass. The default transformResponse function at lib/defaults/index.js:124 calls JSON.parse(data, this.parseReviver), where this is the merged config object. Because parseReviver is not present in Axios defaults, not validated by assertOptions, and not subject to any constraints, a polluted Object.prototype.parseReviver function is called for every key-value pair in every JSON response, allowing the attacker to selectively modify individual values while leaving the rest of the response intact. This vulnerability is fixed in 1.15.2.

🎖@cveNotify

🚨 CVE-2026-41606
Uncontrolled Recursion vulnerability in Apache Thrift.

This issue affects Apache Thrift: before 0.23.0.

Users are recommended to upgrade to version 0.23.0, which fixes the issue.

🎖@cveNotify

🚨 CVE-2026-7163
A vulnerability in the assisted-service REST API, an optional Assisted Installer (assisted-service) component in the Multicluster Engine (MCE), allows an authenticated user with minimal namespace-scoped privileges to obtain administrative credentials for arbitrary clusters provisioned through the hub.

The credentials download endpoint (GET /v2/clusters/{cluster_id}/credentials, which returns the kubeadmin password) and the kubeconfig download endpoint are operational in AUTH_TYPE=local mode, the only authentication mode available in on-premises ACM/MCE hub deployments. The local authenticator unconditionally grants full administrative access to any request bearing a valid JWT, with no per-endpoint restrictions. A valid local JWT is embedded as a plaintext query parameter in InfraEnvStatus.ISODownloadURL and is readable by any user who has get rights on an InfraEnv object in their own namespace.

The affected components ship as part of Multicluster Engine (MCE). The Red Hat Advanced Cluster Management (ACM) deployments that include MCE are equally affected.
This issue does not affect the hosted SaaS offering (console.redhat.com), which uses a different authentication mode.

Successful exploitation gives the attacker the kubeadmin password and kubeconfig for any OpenShift cluster provisioned through the affected hub, granting unrestricted root-level administrative access to those spoke clusters.

🎖@cveNotify

🚨 CVE-2026-43038
In the Linux kernel, the following vulnerability has been resolved:

ipv6: icmp: clear skb2->cb[] in ip6_err_gen_icmpv6_unreach()

Sashiko AI-review observed:

In ip6_err_gen_icmpv6_unreach(), the skb is an outer IPv4 ICMP error packet
where its cb contains an IPv4 inet_skb_parm. When skb is cloned into skb2
and passed to icmp6_send(), it uses IP6CB(skb2).

IP6CB interprets the IPv4 inet_skb_parm as an inet6_skb_parm. The cipso
offset in inet_skb_parm.opt directly overlaps with dsthao in inet6_skb_parm
at offset 18.

If an attacker sends a forged ICMPv4 error with a CIPSO IP option, dsthao
would be a non-zero offset. Inside icmp6_send(), mip6_addr_swap() is called
and uses ipv6_find_tlv(skb, opt->dsthao, IPV6_TLV_HAO).

This would scan the inner, attacker-controlled IPv6 packet starting at that
offset, potentially returning a fake TLV without checking if the remaining
packet length can hold the full 18-byte struct ipv6_destopt_hao.

Could mip6_addr_swap() then perform a 16-byte swap that extends past the end
of the packet data into skb_shared_info?

Should the cb array also be cleared in ip6_err_gen_icmpv6_unreach() and
ip6ip6_err() to prevent this?

This patch implements the first suggestion.

I am not sure if ip6ip6_err() needs to be changed.
A separate patch would be better anyway.

🎖@cveNotify

🚨 CVE-2026-42151
Prometheus is an open-source monitoring system and time series database. Prior to versions 3.5.3 and 3.11.3, the client_secret field in the Azure AD remote write OAuth configuration (storage/remote/azuread) was typed as string instead of Secret. Prometheus redacts fields of type Secret when serving the configuration via the /-/config HTTP API endpoint. Because the field was a plain string, the Azure OAuth client secret was exposed in plaintext to any user or process with access to that endpoint. This issue has been patched in versions 3.5.3 and 3.11.3.

🎖@cveNotify

🚨 CVE-2026-42154
Prometheus is an open-source monitoring system and time series database. Prior to versions 3.5.3 and 3.11.3, the remote read endpoint (/api/v1/read) does not validate the declared decoded length in a snappy-compressed request body before allocating memory. An unauthenticated attacker can send a small payload that causes a huge heap allocation per request. Under concurrent load this can exhaust available memory and crash the Prometheus process. This issue has been patched in versions 3.5.3 and 3.11.3.

🎖@cveNotify

🚨 CVE-2026-6321
fast-uri decoded percent-encoded path separators and dot segments before applying dot-segment removal in its normalize() and equal() functions. Encoded path data was treated like real slashes and parent-directory references, so distinct URIs could collapse onto the same normalized path. Applications that normalize or compare attacker-controlled URLs to enforce path-based policy can be bypassed, with a path that appears confined under an allowed prefix normalizing to a different location. Versions <= 3.1.0 are affected. Update to 3.1.1 or later.

🎖@cveNotify

🚨 CVE-2026-6322
fast-uri normalize() decoded percent-encoded authority delimiters inside the host component and then re-emitted them as raw delimiters during serialization. A host that combined an allowed domain, an encoded at-sign, and a different domain was re-emitted with the at-sign as a raw userinfo separator, changing the URI's authority to the second domain. Applications that normalize untrusted URLs before host allowlist checks, redirect validation, or outbound request routing can be steered to a different authority than the input appeared to specify. Versions <= 3.1.1 are affected. Update to 3.1.2 or later.

🎖@cveNotify

🚨 CVE-2026-43112
In the Linux kernel, the following vulnerability has been resolved:

fs/smb/client: fix out-of-bounds read in cifs_sanitize_prepath

When cifs_sanitize_prepath is called with an empty string or a string
containing only delimiters (e.g., "/"), the current logic attempts to
check *(cursor2 - 1) before cursor2 has advanced. This results in an
out-of-bounds read.

This patch adds an early exit check after stripping prepended
delimiters. If no path content remains, the function returns NULL.

The bug was identified via manual audit and verified using a
standalone test case compiled with AddressSanitizer, which
triggered a SEGV on affected inputs.

🎖@cveNotify

🚨 CVE-2026-43125
In the Linux kernel, the following vulnerability has been resolved:

dlm: validate length in dlm_search_rsb_tree

The len parameter in dlm_dump_rsb_name() is not validated and comes
from network messages. When it exceeds DLM_RESNAME_MAXLEN, it can
cause out-of-bounds write in dlm_search_rsb_tree().

Add length validation to prevent potential buffer overflow.

🎖@cveNotify

🚨 CVE-2026-41672
xmldom is a pure JavaScript W3C standard-based (XML DOM Level 2 Core) `DOMParser` and `XMLSerializer` module. In @xmldom/xmldom prior to versions 0.9.10 and 0.8.13 and xmldom version 0.6.0 and prior, the package allows attacker-controlled comment content to be serialized into XML without validating or neutralizing comment-breaking sequences. As a result, an attacker can terminate the comment early and inject arbitrary XML nodes into the serialized output. This issue has been patched in versions @xmldom/xmldom versions 0.9.10 and 0.8.13.

🎖@cveNotify

🚨 CVE-2026-41675
xmldom is a pure JavaScript W3C standard-based (XML DOM Level 2 Core) `DOMParser` and `XMLSerializer` module. In @xmldom/xmldom prior to versions 0.9.10 and 0.8.13 and xmldom version 0.6.0 and prior, the package allows attacker-controlled processing instruction data to be serialized into XML without validating or neutralizing the PI-closing sequence ?>. As a result, an attacker can terminate the processing instruction early and inject arbitrary XML nodes into the serialized output. This issue has been patched in versions @xmldom/xmldom versions 0.9.10 and 0.8.13.

🎖@cveNotify

🚨 CVE-2026-33814
When processing HTTP/2 SETTINGS frames, transport will enter an infinite loop of writing CONTINUATION frames if it receives a SETTINGS_MAX_FRAME_SIZE with a value of 0.

🎖@cveNotify