🚨 CVE-2026-58088
The ELF core dump code counted the number of dumpable VM map entries, allocated a buffer for the corresponding program headers, then iterated over the map a second time to populate them. A process sharing the address space via rfork(2) can mutate the map between the two passes, causing the second pass to write program headers past the end of the buffer.
An unprivileged local user sharing an address space with a process that dumps core can trigger an out-of-bounds write on the kernel heap, potentially leading to privilege escalation.
🎖@cveNotify
The ELF core dump code counted the number of dumpable VM map entries, allocated a buffer for the corresponding program headers, then iterated over the map a second time to populate them. A process sharing the address space via rfork(2) can mutate the map between the two passes, causing the second pass to write program headers past the end of the buffer.
An unprivileged local user sharing an address space with a process that dumps core can trigger an out-of-bounds write on the kernel heap, potentially leading to privilege escalation.
🎖@cveNotify
🚨 CVE-2026-72889
Net::OAuth versions before 0.33 for Perl allow the sender to choose the signature algorithm in verify.
verify resolves the signature method class from the signature_method parameter of the incoming message. signature_method is required on every request, so the algorithm used to check a signature is chosen by whoever sent it, and nothing lets the verifying party pin the method instead. When a message names HMAC-SHA1 or HMAC-SHA256, the key is derived from consumer_secret and token_secret rather than from the key the provider deployed.
A provider deployed on RSA-SHA1 holds only the consumer public key, and RFC 5849 does not use consumer_secret for that method, so the required parameter is filled with a placeholder. A client that names HMAC-SHA1 instead has its signature checked against that placeholder, so a guessable one is enough to forge requests for any consumer key and token.
🎖@cveNotify
Net::OAuth versions before 0.33 for Perl allow the sender to choose the signature algorithm in verify.
verify resolves the signature method class from the signature_method parameter of the incoming message. signature_method is required on every request, so the algorithm used to check a signature is chosen by whoever sent it, and nothing lets the verifying party pin the method instead. When a message names HMAC-SHA1 or HMAC-SHA256, the key is derived from consumer_secret and token_secret rather than from the key the provider deployed.
A provider deployed on RSA-SHA1 holds only the consumer public key, and RFC 5849 does not use consumer_secret for that method, so the required parameter is filled with a placeholder. A client that names HMAC-SHA1 instead has its signature checked against that placeholder, so a guessable one is enough to forge requests for any consumer key and token.
🎖@cveNotify
IETF Datatracker
RFC 5849: The OAuth 1.0 Protocol
OAuth provides a method for clients to access server resources on behalf of a resource owner (such as a different client or an end-user). It also provides a process for end-users to authorize third-party access to their server resources without sharing their…
🚨 CVE-2026-75900
An out-of-bounds read vulnerability was found in swtpm's SWTPM_NVRAM_CheckHeader() function. The entry guard checks the buffer length against sizeof(bh), where bh is a pointer, instead of sizeof(*bh), the actual struct size. This allows an undersized buffer to pass validation, causing a 2-byte heap overread on 64-bit systems (6 bytes on 32-bit) when accessing the totlen field. This may cause daemon termination on some platforms and leaks heap data to the log.
🎖@cveNotify
An out-of-bounds read vulnerability was found in swtpm's SWTPM_NVRAM_CheckHeader() function. The entry guard checks the buffer length against sizeof(bh), where bh is a pointer, instead of sizeof(*bh), the actual struct size. This allows an undersized buffer to pass validation, causing a 2-byte heap overread on 64-bit systems (6 bytes on 32-bit) when accessing the totlen field. This may cause daemon termination on some platforms and leaks heap data to the log.
🎖@cveNotify
Redhat
CVE-2026-75900 - Red Hat Customer Portal
CVE Details App
🚨 CVE-2026-76164
AIL Framework contains a server-side request forgery (SSRF) vulnerability in its crawler submission functionality. A low-privileged authenticated user with access to the crawler interface can submit an arbitrary URL for crawling without adequate validation of the destination host.
The crawler can therefore be instructed to make direct HTTP(S) requests to addresses that should not be reachable by application users, including loopback addresses, RFC1918 private networks, link-local addresses, and cloud metadata services such as 169.254.169.254.
Manual crawler tasks bypass the existing domain blacklist because they are assigned a non-zero priority, and ordinary IP literals are classified as web targets and fetched directly rather than through Tor or another proxy. Consequently, an attacker can use the AIL server as a network pivot to access services available from the server's network context.
Responses generated by these requests, including captured HTML, screenshots, and HAR data, can subsequently be accessed through the crawler interface. This makes the SSRF non-blind and may allow an attacker to disclose sensitive internal application data, service information, or cloud instance metadata and credentials.
The patch introduces validation that resolves crawler destinations and rejects URLs resolving to non-global IP addresses, addressing localhost, private-network, and link-local targets.
🎖@cveNotify
AIL Framework contains a server-side request forgery (SSRF) vulnerability in its crawler submission functionality. A low-privileged authenticated user with access to the crawler interface can submit an arbitrary URL for crawling without adequate validation of the destination host.
The crawler can therefore be instructed to make direct HTTP(S) requests to addresses that should not be reachable by application users, including loopback addresses, RFC1918 private networks, link-local addresses, and cloud metadata services such as 169.254.169.254.
Manual crawler tasks bypass the existing domain blacklist because they are assigned a non-zero priority, and ordinary IP literals are classified as web targets and fetched directly rather than through Tor or another proxy. Consequently, an attacker can use the AIL server as a network pivot to access services available from the server's network context.
Responses generated by these requests, including captured HTML, screenshots, and HAR data, can subsequently be accessed through the crawler interface. This makes the SSRF non-blind and may allow an attacker to disclose sensitive internal application data, service information, or cloud instance metadata and credentials.
The patch introduces validation that resolves crawler destinations and rejects URLs resolving to non-global IP addresses, addressing localhost, private-network, and link-local targets.
🎖@cveNotify
GitHub
chg: [security] add a default-enabled option to prevent the crawler f… · ail-project/ail-framework@d7b60ff
…rom accessing localhost. Reported by Tomás Illuminati and geo-chen
🚨 CVE-2026-59691
A heap buffer overflow vulnerability was found in GStreamer's rfbsrc plugin. When a client connects to a malicious RFB/VNC server that advertises a 16bpp framebuffer and sends Hextile-encoded updates, the Hextile background fill path writes 32-bit pixel values into a buffer allocated for 16-bit pixels. This type mismatch causes an out-of-bounds heap write that can lead to denial of service (process crash) and potential memory corruption.
🎖@cveNotify
A heap buffer overflow vulnerability was found in GStreamer's rfbsrc plugin. When a client connects to a malicious RFB/VNC server that advertises a 16bpp framebuffer and sends Hextile-encoded updates, the Hextile background fill path writes 32-bit pixel values into a buffer allocated for 16-bit pixels. This type mismatch causes an out-of-bounds heap write that can lead to denial of service (process crash) and potential memory corruption.
🎖@cveNotify
🚨 CVE-2026-59692
A stack buffer overflow vulnerability was found in GStreamer's DTLS plugin. During a DTLS handshake, the peer certificate Subject Distinguished Name is printed into a fixed-size 2048-byte stack buffer without bounds checking. A remote unauthenticated attacker can send a certificate with an oversized Subject DN that exceeds the buffer, causing a stack buffer overflow and process crash, resulting in denial of service.
🎖@cveNotify
A stack buffer overflow vulnerability was found in GStreamer's DTLS plugin. During a DTLS handshake, the peer certificate Subject Distinguished Name is printed into a fixed-size 2048-byte stack buffer without bounds checking. A remote unauthenticated attacker can send a certificate with an oversized Subject DN that exceeds the buffer, causing a stack buffer overflow and process crash, resulting in denial of service.
🎖@cveNotify
🚨 CVE-2026-18942
A flaw was found in the Feast operator. A malicious tenant could inject arbitrary code into their feature repository. This code would be executed by an automated process with elevated privileges, allowing the tenant to steal sensitive credentials. This could lead to a direct escalation of privileges, granting the tenant administrative control over the Kubernetes cluster.
🎖@cveNotify
A flaw was found in the Feast operator. A malicious tenant could inject arbitrary code into their feature repository. This code would be executed by an automated process with elevated privileges, allowing the tenant to steal sensitive credentials. This could lead to a direct escalation of privileges, granting the tenant administrative control over the Kubernetes cluster.
🎖@cveNotify
🚨 CVE-2026-76166
A flaw was found in mod_cluster's AdvertiseListenerImpl (org.jboss.modcluster core module). A single crafted UDP multicast datagram with a valid HTTP status line and a "Server:" header but without the "Date:", "Digest:", and "Sequence:" headers triggers a NullPointerException in verifyDigest() that is not caught by the worker thread's exception handler. This causes the advertise listener thread to terminate permanently. The failure is silent (isListening() continues to return true) and persists until the node is restarted. The crash occurs before the AdvertiseSecurityKey comparison, so deployments with a configured security key are still affected.
🎖@cveNotify
A flaw was found in mod_cluster's AdvertiseListenerImpl (org.jboss.modcluster core module). A single crafted UDP multicast datagram with a valid HTTP status line and a "Server:" header but without the "Date:", "Digest:", and "Sequence:" headers triggers a NullPointerException in verifyDigest() that is not caught by the worker thread's exception handler. This causes the advertise listener thread to terminate permanently. The failure is silent (isListening() continues to return true) and persists until the node is restarted. The crash occurs before the AdvertiseSecurityKey comparison, so deployments with a configured security key are still affected.
🎖@cveNotify
Redhat
CVE-2026-76166 - Red Hat Customer Portal
CVE Details App
🚨 CVE-2026-15028
A flaw was found in libarchive. This vulnerability allows a remote attacker to trigger a heap overflow by providing a specially crafted tar archive. The issue occurs during the parsing of a PAX extended header containing a malformed SUN.holesdata sparse-file attribute. Successful exploitation could lead to a denial of service, making the system unavailable, or potentially allow for arbitrary code execution, giving the attacker control over the affected system.
🎖@cveNotify
A flaw was found in libarchive. This vulnerability allows a remote attacker to trigger a heap overflow by providing a specially crafted tar archive. The issue occurs during the parsing of a PAX extended header containing a malformed SUN.holesdata sparse-file attribute. Successful exploitation could lead to a denial of service, making the system unavailable, or potentially allow for arbitrary code execution, giving the attacker control over the affected system.
🎖@cveNotify
🚨 CVE-2026-16517
A signed integer overflow vulnerability was found in libarchive's ZIP writer. In the archive_write_zip_header function in archive_write_set_format_zip.c, when ZIP encryption is enabled and the entry file size is close to INT64_MAX, the addition of the encryption overhead to the entry size overflows int64_t, resulting in undefined behavior. This could lead to incorrect Zip64 extension decisions or potential memory corruption.
🎖@cveNotify
A signed integer overflow vulnerability was found in libarchive's ZIP writer. In the archive_write_zip_header function in archive_write_set_format_zip.c, when ZIP encryption is enabled and the entry file size is close to INT64_MAX, the addition of the encryption overhead to the entry size overflows int64_t, resulting in undefined behavior. This could lead to incorrect Zip64 extension decisions or potential memory corruption.
🎖@cveNotify
🚨 CVE-2026-18947
A flaw was found in Feast. An authorization bypass vulnerability exists in the /materialize and /materialize-incremental endpoints. By sending a specially crafted request that omits the feature_views field, an attacker can bypass intended permission checks. This allows an unauthenticated remote attacker, or any authenticated user, to trigger a full re-materialization of all feature views. The consequence is a Denial of Service (DoS) due to data corruption and significant resource consumption across all tenants.
🎖@cveNotify
A flaw was found in Feast. An authorization bypass vulnerability exists in the /materialize and /materialize-incremental endpoints. By sending a specially crafted request that omits the feature_views field, an attacker can bypass intended permission checks. This allows an unauthenticated remote attacker, or any authenticated user, to trigger a full re-materialization of all feature views. The consequence is a Denial of Service (DoS) due to data corruption and significant resource consumption across all tenants.
🎖@cveNotify
🚨 CVE-2026-18948
A flaw was found in Feast. The system improperly deserializes user-defined functions (UDFs) stored in its registry, which are serialized using the 'dill' library. This allows a remote attacker to store a malicious UDF, leading to unauthenticated arbitrary code execution on the feature server in default configurations. An authenticated attacker can also achieve arbitrary code execution on the registry server by bypassing authorization checks during deserialization. This vulnerability can result in cross-tenant data access and lateral movement within the system.
🎖@cveNotify
A flaw was found in Feast. The system improperly deserializes user-defined functions (UDFs) stored in its registry, which are serialized using the 'dill' library. This allows a remote attacker to store a malicious UDF, leading to unauthenticated arbitrary code execution on the feature server in default configurations. An authenticated attacker can also achieve arbitrary code execution on the registry server by bypassing authorization checks during deserialization. This vulnerability can result in cross-tenant data access and lateral movement within the system.
🎖@cveNotify
🚨 CVE-2026-18950
A flaw was found in odh-dashboard. An authenticated user of the dashboard can exploit a vulnerability related to how RoleBindings are created. The system does not properly validate the `roleRef` field, allowing a user to specify an arbitrary role, including highly privileged ones like `cluster-admin`. This can lead to privilege escalation, where an attacker gains unauthorized elevated access within their namespace and potentially persistent control over the system.
🎖@cveNotify
A flaw was found in odh-dashboard. An authenticated user of the dashboard can exploit a vulnerability related to how RoleBindings are created. The system does not properly validate the `roleRef` field, allowing a user to specify an arbitrary role, including highly privileged ones like `cluster-admin`. This can lead to privilege escalation, where an attacker gains unauthorized elevated access within their namespace and potentially persistent control over the system.
🎖@cveNotify
🚨 CVE-2026-72210
In the Linux kernel, the following vulnerability has been resolved:
ntfs: fix off-by-one in mapping pairs decoding bounds checks
In ntfs_mapping_pairs_decompress(), attr_end points one byte past the
end of the attribute record:
attr_end = (u8 *)attr + le32_to_cpu(attr->length);
The two bounds checks validating that mapping pair data bytes fit within
the attribute use strict greater-than (>), which allows a one-byte
out-of-bounds read when the data extends exactly to attr_end:
b = *buf & 0xf;
if (b) {
if (unlikely(buf + b > attr_end)) // off-by-one
goto io_error;
for (deltaxcn = (s8)buf[b--]; b; b--)
deltaxcn = (deltaxcn << 8) + buf[b];
}
When buf + b == attr_end, the check evaluates to false and buf[b] reads
one byte past the valid attribute boundary. The same pattern appears in
the LCN delta bytes check.
Fix both checks to use >= so that buf[b] at exactly attr_end is
correctly rejected as out of bounds.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
ntfs: fix off-by-one in mapping pairs decoding bounds checks
In ntfs_mapping_pairs_decompress(), attr_end points one byte past the
end of the attribute record:
attr_end = (u8 *)attr + le32_to_cpu(attr->length);
The two bounds checks validating that mapping pair data bytes fit within
the attribute use strict greater-than (>), which allows a one-byte
out-of-bounds read when the data extends exactly to attr_end:
b = *buf & 0xf;
if (b) {
if (unlikely(buf + b > attr_end)) // off-by-one
goto io_error;
for (deltaxcn = (s8)buf[b--]; b; b--)
deltaxcn = (deltaxcn << 8) + buf[b];
}
When buf + b == attr_end, the check evaluates to false and buf[b] reads
one byte past the valid attribute boundary. The same pattern appears in
the LCN delta bytes check.
Fix both checks to use >= so that buf[b] at exactly attr_end is
correctly rejected as out of bounds.
🎖@cveNotify
🚨 CVE-2026-66792
A flaw was found in the multicloud-operators-subscription component. This vulnerability allows a user on a managed cluster to escalate their privileges by creating a Subscription with specific, crafted annotations. Successful exploitation grants the attacker the ability to deploy resources into any namespace with the elevated permissions of the controller's Service Account, potentially leading to unauthorized access and control over cluster resources.
🎖@cveNotify
A flaw was found in the multicloud-operators-subscription component. This vulnerability allows a user on a managed cluster to escalate their privileges by creating a Subscription with specific, crafted annotations. Successful exploitation grants the attacker the ability to deploy resources into any namespace with the elevated permissions of the controller's Service Account, potentially leading to unauthorized access and control over cluster resources.
🎖@cveNotify
Redhat
CVE-2026-66792 - Red Hat Customer Portal
CVE Details App
🚨 CVE-2026-16440
In Eclipse OpenJ9 versions up to 0.60, a crafted .class file with deeply nested annotations causes a segmentation fault.
🎖@cveNotify
In Eclipse OpenJ9 versions up to 0.60, a crafted .class file with deeply nested annotations causes a segmentation fault.
🎖@cveNotify
GitHub
Add stackoverflow checks to class file parsing by tajila · Pull Request #24572 · eclipse-openj9/openj9
There are many recursive operations that may occur during classfile
parsing. A malicious classfile could cause a stack overflow by nesting
a large number of annotations. To prevent this, this PR ch...
parsing. A malicious classfile could cause a stack overflow by nesting
a large number of annotations. To prevent this, this PR ch...
🚨 CVE-2025-69223
AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Versions 3.13.2 and below allow a zip bomb to be used to execute a DoS against the AIOHTTP server. An attacker may be able to send a compressed request that when decompressed by AIOHTTP could exhaust the host's memory. This issue is fixed in version 3.13.3.
🎖@cveNotify
AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Versions 3.13.2 and below allow a zip bomb to be used to execute a DoS against the AIOHTTP server. An attacker may be able to send a compressed request that when decompressed by AIOHTTP could exhaust the host's memory. This issue is fixed in version 3.13.3.
🎖@cveNotify
GitHub
Use decompressor max_length parameter (#11898) (#11918) · aio-libs/aiohttp@2b920c3
(cherry picked from commit 92477c5a74c43dfe0474bd24f8de11875daa2298)
---------
Co-authored-by: J. Nick Koston <nick@koston.org>
---------
Co-authored-by: J. Nick Koston <nick@koston.org>
🚨 CVE-2025-12543
A flaw was found in the Undertow HTTP server core, which is used in WildFly, JBoss EAP, and other Java applications. The Undertow library fails to properly validate the Host header in incoming HTTP requests.As a result, requests containing malformed or malicious Host headers are processed without rejection, enabling attackers to poison caches, perform internal network scans, or hijack user sessions.
🎖@cveNotify
A flaw was found in the Undertow HTTP server core, which is used in WildFly, JBoss EAP, and other Java applications. The Undertow library fails to properly validate the Host header in incoming HTTP requests.As a result, requests containing malformed or malicious Host headers are processed without rejection, enabling attackers to poison caches, perform internal network scans, or hijack user sessions.
🎖@cveNotify
🚨 CVE-2026-21441
urllib3 is an HTTP client library for Python. urllib3's streaming API is designed for the efficient handling of large HTTP responses by reading the content in chunks, rather than loading the entire response body into memory at once. urllib3 can perform decoding or decompression based on the HTTP `Content-Encoding` header (e.g., `gzip`, `deflate`, `br`, or `zstd`). When using the streaming API, the library decompresses only the necessary bytes, enabling partial content consumption. Starting in version 1.22 and prior to version 2.6.3, for HTTP redirect responses, the library would read the entire response body to drain the connection and decompress the content unnecessarily. This decompression occurred even before any read methods were called, and configured read limits did not restrict the amount of decompressed data. As a result, there was no safeguard against decompression bombs. A malicious server could exploit this to trigger excessive resource consumption on the client. Applications and libraries are affected when they stream content from untrusted sources by setting `preload_content=False` when they do not disable redirects. Users should upgrade to at least urllib3 v2.6.3, in which the library does not decode content of redirect responses when `preload_content=False`. If upgrading is not immediately possible, disable redirects by setting `redirect=False` for requests to untrusted source.
🎖@cveNotify
urllib3 is an HTTP client library for Python. urllib3's streaming API is designed for the efficient handling of large HTTP responses by reading the content in chunks, rather than loading the entire response body into memory at once. urllib3 can perform decoding or decompression based on the HTTP `Content-Encoding` header (e.g., `gzip`, `deflate`, `br`, or `zstd`). When using the streaming API, the library decompresses only the necessary bytes, enabling partial content consumption. Starting in version 1.22 and prior to version 2.6.3, for HTTP redirect responses, the library would read the entire response body to drain the connection and decompress the content unnecessarily. This decompression occurred even before any read methods were called, and configured read limits did not restrict the amount of decompressed data. As a result, there was no safeguard against decompression bombs. A malicious server could exploit this to trigger excessive resource consumption on the client. Applications and libraries are affected when they stream content from untrusted sources by setting `preload_content=False` when they do not disable redirects. Users should upgrade to at least urllib3 v2.6.3, in which the library does not decode content of redirect responses when `preload_content=False`. If upgrading is not immediately possible, disable redirects by setting `redirect=False` for requests to untrusted source.
🎖@cveNotify
GitHub
Merge commit from fork · urllib3/urllib3@8864ac4
* Stop decoding response content during redirects needlessly
* Rename the new query parameter
* Add a changelog entry
* Rename the new query parameter
* Add a changelog entry
🚨 CVE-2026-22029
React Router is a router for React. In @remix-run/router version prior to 1.23.2 and react-router 7.0.0 through 7.11.0, React Router (and Remix v1/v2) SPA open navigation redirects originating from loaders or actions in Framework Mode, Data Mode, or the unstable RSC modes can result in unsafe URLs causing unintended javascript execution on the client. This is only an issue if you are creating redirect paths from untrusted content or via an open redirect. There is no impact if Declarative Mode (<BrowserRouter>) is being used. This issue has been patched in @remix-run/router version 1.23.2 and react-router version 7.12.0.
🎖@cveNotify
React Router is a router for React. In @remix-run/router version prior to 1.23.2 and react-router 7.0.0 through 7.11.0, React Router (and Remix v1/v2) SPA open navigation redirects originating from loaders or actions in Framework Mode, Data Mode, or the unstable RSC modes can result in unsafe URLs causing unintended javascript execution on the client. This is only an issue if you are creating redirect paths from untrusted content or via an open redirect. There is no impact if Declarative Mode (<BrowserRouter>) is being used. This issue has been patched in @remix-run/router version 1.23.2 and react-router version 7.12.0.
🎖@cveNotify
GitHub
XSS via Open Redirects
React Router (and Remix v1/v2) SPA open navigation redirects originating from loaders or actions in [Framework Mode](https://reactrouter.com/start/modes#framework), [Data Mode](https://reactrouter....
🚨 CVE-2026-23490
pyasn1 is a generic ASN.1 library for Python. Prior to 0.6.2, a Denial-of-Service issue has been found that leads to memory exhaustion from malformed RELATIVE-OID with excessive continuation octets. This vulnerability is fixed in 0.6.2.
🎖@cveNotify
pyasn1 is a generic ASN.1 library for Python. Prior to 0.6.2, a Denial-of-Service issue has been found that leads to memory exhaustion from malformed RELATIVE-OID with excessive continuation octets. This vulnerability is fixed in 0.6.2.
🎖@cveNotify
GitHub
Merge commit from fork · pyasn1/pyasn1@3908f14
Add limit of 20 continuation octets per OID arc to prevent a potential memory
exhaustion from excessive continuation bytes input.
exhaustion from excessive continuation bytes input.