🚨 CVE-2026-63335
The RabbitMQ Java client library allows Java and JVM-based applications to connect to and interact with RabbitMQ nodes. Prior to 5.31.0, inbound AMQP command assembly in src/main/java/com/rabbitmq/client/impl/CommandAssembler.java processes a content-bearing method and header whose remainingBodyBytes value is smaller than a following AMQP.FRAME_BODY payload. CommandAssembler.consumeBodyFrame subtracts the peer-controlled payload length before validating that it fits, drives remainingBodyBytes negative, and throws a raw UnsupportedOperationException instead of MalformedFrameException. A malicious or compromised broker peer can send this malformed sequence on an open nonzero channel to terminate frame processing and close the client connection, causing denial of service for work using that connection. This issue is fixed in version 5.31.0.

🎖@cveNotify

🚨 CVE-2026-63336
The RabbitMQ Java client library allows Java and JVM-based applications to connect to and interact with RabbitMQ nodes. Prior to 5.33.0, com.rabbitmq.client.ConnectionFactory.useSslProtocol() and ConnectionFactory.useSslProtocol(String) configure com.rabbitmq.client.TrustEverythingTrustManager and leave hostname verification disabled, causing arbitrary server certificates, including self-signed certificates, to be accepted. A network attacker able to intercept a TLS connection can impersonate the RabbitMQ broker, read protected AMQP traffic, and modify traffic without certificate or hostname validation. The fix changes the production TLS helpers to use the JVM default trust store and enables hostname verification, while retaining an explicitly named development-only no-verification helper. This issue is fixed in version 5.33.0.

🎖@cveNotify

🚨 CVE-2026-69220
The RabbitMQ Java client library allows Java and JVM-based applications to connect to and interact with RabbitMQ nodes. Prior to 5.33.1, src/main/java/com/rabbitmq/client/impl/ValueReader.java permits ValueReader.readTable and ValueReader.readArray to call ValueReader.readFieldValue recursively for AMQP table type F and AMQP array type A values without a nesting-depth limit. A malicious AMQP server or network intermediary can send approximately 580 nested table levels in the pre-authentication connection.start frame, fitting within the default 131072-byte frame maximum, to trigger StackOverflowError. The error terminates the client input processing thread and causes denial of service. This issue is fixed in version 5.33.1.

🎖@cveNotify

🚨 CVE-2026-75924
A flaw was found in managed-serviceaccount. A compromised addon-manager pod, due to its ClusterRole granting excessive permissions, can read any secret across all namespaces. Additionally, it can approve arbitrary Certificate Signing Requests (CSRs), which could lead to information disclosure and privilege escalation within the cluster.

🎖@cveNotify

🚨 CVE-2021-43716
Verification Bypass vulnerability exists in EPSON 150075647YWWV110 EasyMP Network Updater Ver.1.20. The Epson projector can be updated by encrypted firmware through USB.

🎖@cveNotify

🚨 CVE-2021-43717
An issue exists in pson EH-TW5350 Epson iProjection.apk v3.2.6. If you identify a projector equipped with an iProjection function, you can access the projector using hard-coded authentication information and control the projector maliciously.

🎖@cveNotify

🚨 CVE-2026-32657
Dell AppSync Version 4.6.0.0, Dell Metro Node Version 8.0.0, Dell UCC Edge Version 3.0.1, Dell VxRail Version 8.0.322, Dell PowerMax Version 10.3.0, Dell Unity Version 5.4, Dell PowerFlex Manager Version 4.5.4, Dell PowerFlex Intelligent Catalog Versions 46.377.00 and 46.382.00 and Dell PowerFlex Rack version 4.5.4 and prior versions, contain(s) an UNIX Symbolic Link (Symlink) Following vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Elevation of privileges.

🎖@cveNotify

🚨 CVE-2026-44472
Saleor is an e-commerce platform. From 2.10.0rc1 until 3.21.67, 3.22.63, and 3.23.22, the account activation flow treats email verification as sufficient proof of account ownership and automatically associates anonymous commerce data with the newly activated account. An attacker can use accountRegister to create an account with a victim's email address before the victim registers. If the victim follows the activation link sent to that mailbox, Saleor activates the attacker-created account and saleor/graphql/account/mutations/account/confirm_account.py can merge anonymous orders and gift-card data for the same email address without requiring the account password or another authentication factor. The attacker can then access the merged order history and personal data, including names, addresses, and phone numbers. The patched supported lines disable automatic merging by default, while the redesigned 3.24.0 flow requires password confirmation before anonymous objects are linked. This issue is fixed in versions 3.21.67, 3.22.63, and 3.23.22.

🎖@cveNotify

🚨 CVE-2026-48508
Lemur manages TLS certificate creation. Prior to 1.9.1, StrictRolePermission and AuthorityCreatorPermission in lemur/auth/permissions.py call flask_principal.Permission.__init__() with zero Need objects when ADMIN_ONLY_AUTHORITY_CREATION and LEMUR_STRICT_ROLE_ENFORCEMENT are unset because both flags default to False. Flask-Principal Permission.allows() returns True when self.needs is empty, so the .can() authorization gate permits every authenticated identity, including the read-only role. A read-only user can access POST /api/1/authorities, POST /api/1/certificates/upload, POST /api/1/pending_certificates//upload, POST /api/1/notifications, PUT or DELETE /api/1/notifications/, and POST /api/1/domains to create root Certificate Authorities, upload arbitrary certificates, create or edit notifications that reach an SSRF sink, and create domain entries. Explicitly setting either flag to False continues to opt into the permissive behavior. This issue is fixed in version 1.9.1.

🎖@cveNotify

🚨 CVE-2026-49452
WeasyPrint helps web developers to create PDF documents. Prior to 69.0, WeasyPrint embeds unescaped HTML presentational-hint attribute values into CSS in weasyprint/css/__init__.py when presentational_hints=True. The background attribute is inserted into a background-image:url() declaration and parsed by tinycss2.parse_blocks_contents(), allowing untrusted HTML to inject additional CSS declarations. Applications that render untrusted HTML with presentational hints enabled can be affected by CSS injection and server-side requests through injected url() values. This issue is fixed in version 69.0.

🎖@cveNotify

🚨 CVE-2026-50143
The Apify MCP server enables AI agents to extract data from websites using ready-made scrapers, crawlers, and automation tools available on the Apify Store. Prior to 0.10.11, getActorMCPServerURL in src/mcp/actors.ts concatenates the trusted Actor standby URL with the attacker-controlled webServerMcpPath from an Actor definition without verifying the resulting origin, allowing a malicious Actor publisher to use a userinfo-style authority value to redirect connectMCPClient to a third-party host. The call-actor, fetch-actor-details, and actor-mcp tool-loading paths pass this URL to transports in src/mcp/client.ts that attach the victim Authorization bearer token, exposing the Apify API token and enabling access to Actors, stored data, and billable compute. A victim must invoke or inspect the attacker-controlled Actor. This issue is fixed in version 0.10.11.

🎖@cveNotify

🚨 CVE-2026-50161
libre is a generic library for real-time communications with asynchronous input and output support. Prior to 4.8.1, the websock_decode() function in src/websock/websock.c contains an integer overflow when validating a masked WebSocket frame that uses the 64-bit extended length encoding. The expression 4 + hdr->len can wrap when hdr->len is close to UINT64_MAX, causing the mbuf_get_left() bounds check to pass. The subsequent XOR unmasking loop then writes beyond the heap buffer. Applications using websock_accept() or websock_accept_proto() to implement a WebSocket server are affected, and exploitation can cause attacker-controlled heap corruption or denial of service after the HTTP WebSocket upgrade handshake. This issue is fixed in version 4.8.1.

🎖@cveNotify

🚨 CVE-2026-50167
Kurrier is a modern, self-hosted workspace for email, calendar, contacts, and storage. Prior to 1.2.4, Kurrier API endpoints for listing and retrieving webhook and identity resources did not enforce ownership checks for authenticated API requests. An attacker with a valid API key could use another account's identifiers to read and enumerate webhook and identity resources belonging to that account through apps/worker/server/routes/api/kurrier/webhooks/[id].get.ts, apps/worker/server/routes/api/kurrier/webhooks/index.get.ts, apps/worker/server/routes/api/kurrier/identities/[id].get.ts, and apps/worker/server/routes/api/kurrier/identities/index.get.ts. Anonymous requests and invalid API keys were rejected, and cross-user modification operations were blocked, but affected GET and list operations could expose another user's resource metadata. This issue is fixed in version 1.2.4.

🎖@cveNotify

🚨 CVE-2026-52607
A directory traversal vulnerability in reportico-web <= 8.1.0 allows remote attackers to expose or execute arbitrary php files on the web server by specifying the filename in the target_format parameter in conjunction with the execute_mode=EXECUTE parameter of the run.php endpoint.

🎖@cveNotify

🚨 CVE-2026-52608
An incorrect access control vulnerability in reportico-web <= 8.1.0 allows an unauthenticated attacker to inject arbitrary php code into the PreExecuteCode attribute of any report regardless of the safe_mode setting leading to remote code execution.

🎖@cveNotify

🚨 CVE-2026-52609
A reflected cross-site scripting (XSS) vulnerability in reportico-web <= 8.1.0 allows remote attackers to execute arbitrary JavaScript in the web browser of a user by including a malicious payload in the reportico_criteria parameter in conjunction with the execute_mode=CRITERIA parameter of run.php.

🎖@cveNotify

🚨 CVE-2026-53533
aiosmtplib is an asynchronous SMTP client for use with asyncio. Prior to 5.1.1, SMTP.mail(), SMTP.rcpt(), SMTP.vrfy(), and SMTP.expn() send caller-supplied addresses without rejecting embedded CR or LF bytes. Data after the line break is framed as additional standalone SMTP command lines, allowing an attacker who influences an envelope sender or recipient to inject commands such as MAIL FROM, RCPT TO, RSET, DATA, or AUTH. SMTP.sendmail() and SMTP.send() without a Message object pass addresses through the affected methods, while SMTP.send_message() is not affected. Successful injection can desynchronize the command-response pipeline, hang the SMTP instance, or send an arbitrary message without requiring attacker control of the SMTP server. This issue is fixed in version 5.1.1.

🎖@cveNotify

🚨 CVE-2026-54552
sh provides Python process launching. Prior to 2.2.4, the _uid option in sh.py performs an incomplete privilege drop on Linux and Unix-like systems. When sh runs from an elevated process and launches a command with _uid set to an unprivileged user, the child changes its UID but can retain the parent process's supplementary groups because the privilege-drop sequence does not fully establish the target user's UID, primary GID, and supplementary groups. The child can therefore retain access to files or resources granted to privileged groups such as root, docker, disk, shadow, or sudo, violating the expected _uid privilege boundary. This issue is fixed in version 2.2.4.

🎖@cveNotify

🚨 CVE-2026-54570
AngleSharp is a .NET library for parsing angle bracket based hyper-texts. Prior to 1.5.0, MathAnnotationXmlElement in AngleSharp/Mathml/Dom/Internal/MathAnnotationXmlElement.cs is not treated as an HTML integration point when its encoding attribute is text/html or application/xhtml+xml, causing Consume in AngleSharp/Html/Parser/HtmlDomBuilder.cs to route tokens through foreign-content parsing instead of HTML parsing. A sanitizer can therefore observe a different DOM from the browser that reparses the serialized output. An attacker can combine this namespace differential with markup-breaking characters in an attribute value so that an element hidden from the sanitizer becomes active script-capable HTML after browser reparse, resulting in mutation cross-site scripting. This issue is fixed in version 1.5.0.

🎖@cveNotify

🚨 CVE-2026-61696
Forem is open source software for building communities. In versions before commit 92eacd16a82cf9007ba8e16a2258b42e3b53ca9c, a malicious value submitted through feedback_message[message] is stored without sanitization and rendered in app/views/admin/feedback_messages/_feedback_message.html.erb through raw(feedback_message.message) when offender_id is present. Viewing the abuse report executes arbitrary JavaScript in an administrator's browser and may expose sensitive in-page data, abuse CSRF tokens, or perform administrative actions in the victim's session. The public FeedbackMessagesController accepts the report without authorization and previously permitted a submitted offender_id, making the vulnerable rendering path reachable by an unauthenticated attacker. This issue is fixed in commit 92eacd16a82cf9007ba8e16a2258b42e3b53ca9c

🎖@cveNotify

🚨 CVE-2026-63640
MagicMirror² is an open source modular smart mirror platform. Prior to 2.37.0, when hideConfigSecrets is enabled, the catch-all socket dispatcher in js/node_helper.js passes every inbound object payload through replaceSecretPlaceholder in js/server_functions.js before invoking socketNotificationReceived. A client connected to a loaded module namespace can submit a SECRET_API_KEY placeholder, causing the server to replace it with the corresponding process environment value. The default weather helper accepts INIT_WEATHER, copies the attacker-controlled instanceId, and returns it in WEATHER_ERROR, providing an echo path for the expanded secret. This reverses the intended one-way redaction boundary and can disclose API tokens, credentials, or service keys stored in SECRET_ variables. This issue is fixed in version 2.37.0.

🎖@cveNotify