🚨 CVE-2026-61634
The RabbitMQ Java client library allows Java and JVM-based applications to connect to and interact with RabbitMQ nodes. Prior to 5.33.0, the AMQP connection tuning path records the negotiated AMQP frame_max value, but src/main/java/com/rabbitmq/client/impl/SocketFrameHandler.java and NettyFrameHandlerFactory continue to validate broker-controlled frame payload lengths against maxInboundMessageBodySize because the negotiated limit is not applied consistently through setMaxInboundFramePayloadSize. A malicious or compromised broker can send a method frame larger than the negotiated frame_max during or after connection establishment, causing the client to allocate and decode a protocol-invalid frame instead of rejecting it with MalformedFrameException. The protocol violation can disrupt the affected connection and cause client-side denial of service. This issue is fixed in version 5.33.0.

🎖@cveNotify

🚨 CVE-2026-63335
The RabbitMQ Java client library allows Java and JVM-based applications to connect to and interact with RabbitMQ nodes. Prior to 5.31.0, inbound AMQP command assembly in src/main/java/com/rabbitmq/client/impl/CommandAssembler.java processes a content-bearing method and header whose remainingBodyBytes value is smaller than a following AMQP.FRAME_BODY payload. CommandAssembler.consumeBodyFrame subtracts the peer-controlled payload length before validating that it fits, drives remainingBodyBytes negative, and throws a raw UnsupportedOperationException instead of MalformedFrameException. A malicious or compromised broker peer can send this malformed sequence on an open nonzero channel to terminate frame processing and close the client connection, causing denial of service for work using that connection. This issue is fixed in version 5.31.0.

🎖@cveNotify

🚨 CVE-2026-63336
The RabbitMQ Java client library allows Java and JVM-based applications to connect to and interact with RabbitMQ nodes. Prior to 5.33.0, com.rabbitmq.client.ConnectionFactory.useSslProtocol() and ConnectionFactory.useSslProtocol(String) configure com.rabbitmq.client.TrustEverythingTrustManager and leave hostname verification disabled, causing arbitrary server certificates, including self-signed certificates, to be accepted. A network attacker able to intercept a TLS connection can impersonate the RabbitMQ broker, read protected AMQP traffic, and modify traffic without certificate or hostname validation. The fix changes the production TLS helpers to use the JVM default trust store and enables hostname verification, while retaining an explicitly named development-only no-verification helper. This issue is fixed in version 5.33.0.

🎖@cveNotify

🚨 CVE-2026-63337
The RabbitMQ Java client library allows Java and JVM-based applications to connect to and interact with RabbitMQ nodes. Prior to 5.33.0, com.rabbitmq.tools.jsonrpc.ProcedureDescription receives a javaReturnType value in an untrusted system.describe response and passes it through JSONUtil.tryFill, setJavaReturnType, and computeReturnTypeAsJavaClass to Class.forName(javaReturnType) with initialization enabled. An attacker able to answer the JsonRpcClient request through a shared broker or network interception can select a class already present in the victim JVM and trigger its static initializer, while JsonRpcClient.java later passes getReturnType output to mapper.parse and may also create type confusion. Successful exploitation can affect confidentiality, integrity, and availability in the client process. This issue is fixed in version 5.33.0.

🎖@cveNotify

🚨 CVE-2026-66781
A flaw was found in the Submariner operator. The Submariner Custom Resource (CR), used for configuring network connectivity, stores the IPsec pre-shared key (PSK) in an unencrypted format. This key, which is critical for securing communication between Kubernetes clusters, can be accessed by unauthorized parties. Such access enables an attacker to passively decrypt network traffic flowing between any two clusters in the mesh, resulting in sensitive information disclosure.

🎖@cveNotify

🚨 CVE-2026-66782
A flaw was found in the Submariner operator. This vulnerability allows for the exposure of a long-lived broker service account (SA) bearer token within the Submariner Custom Resource (CR) specification. An attacker with access to the cluster's etcd database or through `kubectl get` commands could obtain this token. The possession of this token grants full control over the mesh network, enabling unauthorized management of network resources such as endpoints and secrets.

🎖@cveNotify

🚨 CVE-2026-66783
A flaw was found in the `submariner-operator` component of Red Hat Advanced Cluster Management for Kubernetes. This vulnerability allows a cluster administrator, or any user with permissions to modify the Submariner Custom Resource (CR), to specify an unvalidated image path. This lack of validation enables an attacker to execute arbitrary code with elevated privileges across the entire cluster, including control-plane nodes, by deploying a malicious image.

🎖@cveNotify

🚨 CVE-2026-67271
Dell PowerStore SDNAS, contains an Out-of-bounds Write vulnerability in the SMB/CIFS. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Denial of service and Remote execution. This is a Critical vulnerability as a remote user could send a specially crafted SMB packet and cause a crash, that is persistent in case automatic restarts are enabled. Additionally, a more sophisticated attacker could use the same vulnerability for Remote Code execution.

🎖@cveNotify

🚨 CVE-2026-69219
The RabbitMQ Java client library allows Java and JVM-based applications to connect to and interact with RabbitMQ nodes. Prior to 5.33.1, src/main/java/com/rabbitmq/client/impl/ValueReader.java uses ValueReader.readBytes to accept a wire-declared contentLength below Integer.MAX_VALUE and allocate a byte array before checking the bytes available in the frame. A malicious AMQP peer can send a LongString or byte-array field with type tag S and a declared length such as 0x7FFFFFFE during the pre-authentication connection.start server-properties table, causing an approximately 2 GB allocation and OutOfMemoryError before readFully consumes data. The resulting memory exhaustion can terminate the JVM and cause denial of service. This issue is fixed in version 5.33.1.

🎖@cveNotify

🚨 CVE-2026-69220
The RabbitMQ Java client library allows Java and JVM-based applications to connect to and interact with RabbitMQ nodes. Prior to 5.33.1, src/main/java/com/rabbitmq/client/impl/ValueReader.java permits ValueReader.readTable and ValueReader.readArray to call ValueReader.readFieldValue recursively for AMQP table type F and AMQP array type A values without a nesting-depth limit. A malicious AMQP server or network intermediary can send approximately 580 nested table levels in the pre-authentication connection.start frame, fitting within the default 131072-byte frame maximum, to trigger StackOverflowError. The error terminates the client input processing thread and causes denial of service. This issue is fixed in version 5.33.1.

🎖@cveNotify

🚨 CVE-2026-70415
Dell PowerStore SDNAS contains a Buffer Copy without Checking Size of Input vulnerability in the NFS/RPC. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Command execution and Denial of service.

🎖@cveNotify

🚨 CVE-2026-71572
Joomla! Core - [20260801] - Response header injection in download views in Joomla 3.0.0-5.4.7, 6.0.0-6.1.2 - Lack of output processing allowed a header injection in the multiple download views, leading to reflected file download / content-type confusion.

🎖@cveNotify

🚨 CVE-2026-71573
Joomla! Core - [20260802] - Improper CORS origin validation in Joomla 4.0.0-5.4.7, 6.0.0-6.1.2 - An improper implementation prevented configured CORS origins from being properly validated in CORS requests.

🎖@cveNotify

🚨 CVE-2026-72531
Joomla! Core - [20260804] - Improper ACL checks for custom fields webservice endpoints in Joomla 4.0.0-5.4.7, 6.0.0-6.1.2 - An improper access check allows unauthorized users to create fields for inaccessible components.

🎖@cveNotify

🚨 CVE-2026-73372
Joomla! Core - [20260809] - Improper ACL checks when injection schema.org contact data in Joomla 5.1.0-5.4.7 and 6.0.0-6.1.2 - An improper access check injects contact information for unaccessible contact items into schema.org snippets.

🎖@cveNotify

🚨 CVE-2026-75897
Improper input validation in the capabilities route handler in OpenSearch Dashboards - the size of the request payload is not bounded - might allow remote attackers to cause a denial of service via a crafted HTTP request.

🎖@cveNotify

🚨 CVE-2026-75924
A flaw was found in managed-serviceaccount. A compromised addon-manager pod, due to its ClusterRole granting excessive permissions, can read any secret across all namespaces. Additionally, it can approve arbitrary Certificate Signing Requests (CSRs), which could lead to information disclosure and privilege escalation within the cluster.

🎖@cveNotify

🚨 CVE-2026-2092
A flaw was found in Keycloak. Keycloak's Security Assertion Markup Language (SAML) broker endpoint does not properly validate encrypted assertions when the overall SAML response is not signed. An attacker with a valid signed SAML assertion can exploit this by crafting a malicious SAML response. This allows the attacker to inject an encrypted assertion for an arbitrary principal, leading to unauthorized access and potential information disclosure.

🎖@cveNotify

🚨 CVE-2026-2603
A flaw was found in Keycloak. A remote attacker could bypass security controls by sending a valid SAML response from an external Identity Provider (IdP) to the Keycloak SAML endpoint for IdP-initiated broker logins. This allows the attacker to complete broker logins even when the SAML Identity Provider is disabled, leading to unauthorized authentication.

🎖@cveNotify

🚨 CVE-2026-11596
In ScreenConnect™ versions prior to 26.2, input
validation within the Host Pass creation functionality could allow an
authenticated user with Host Pass creation privileges the ability to specify a
token expiration duration beyond the intended maximum when generating delegated
access tokens.

🎖@cveNotify

🚨 CVE-2026-54672
electron-updater allows for automatic updates for Electron apps. Prior to 26.15.0, AppImage targets built by app-builder-lib could use an empty path component when setting the LD_LIBRARY_PATH environment variable at runtime. This causes the current working directory to be added to the dynamic linker search path, which may allow an attacker to execute arbitrary code by placing a malicious shared library in the directory from which the AppImage is launched. This issue has been fixed in version 26.15.0.

🎖@cveNotify