🚨 CVE-2026-73373
Joomla! Core - [20260810] - Unrestricted uploads of SHTML files in Joomla 1.0.0-5.4.7, 6.0.0-6.1.2 - The default list of dangerous files did not include SHTML files. On servers that executed these files, that could lead to code execution.

🎖@cveNotify

🚨 CVE-2026-73834
A flaw was found in the must-gather component of Red Hat Advanced Cluster Management for Kubernetes. Certain ACM wrapper Custom Resources that embed Secret data are collected without redaction. When an administrator runs must-gather, credentials and tokens are captured in cleartext in the resulting archive, potentially exposing sensitive information to anyone with access to the archive.

🎖@cveNotify

🚨 CVE-2026-75485
A flaw was found in the must-gather component of Red Hat Advanced Cluster Management for Kubernetes. The cluster Proxy object is dumped in raw form, bypassing the oc inspect redaction that would normally sanitize sensitive fields. This exposes proxy basic-auth credentials in the must-gather archive, potentially disclosing sensitive authentication information to anyone with access to the archive.

🎖@cveNotify

🚨 CVE-2026-75856
CodeWhale before 0.8.64 contains a server-side request forgery bypass vulnerability in DNS pinning logic that fails to prevent time-of-check-time-of-use attacks. Attackers can manipulate DNS responses to fail initial resolution checks and succeed on secondary requests, allowing requests to internal IP addresses and bypassing SSRF mitigations.

🎖@cveNotify

🚨 CVE-2026-75857
CodeWhale versions >= 0.8.41 and < 0.8.64 contain a vulnerability in the exec_shell_interact (alias exec_interact) tool, whose approval_requirement returns ApprovalRequirement::Auto. This overrides the default Required approval for code-executing tools, so LLM-controlled stdin is written into an already-approved long-running interactive shell (e.g., a python3 -i REPL, mysql, ssh, or sudo -i session) without any approval prompt. An attacker who can inject instructions via untrusted content the agent ingests (a fetched page, MCP result, or repo file) can cause commands to run at the privilege level of that approved process. Fixed in 0.8.64.

🎖@cveNotify

🚨 CVE-2026-75858
CodeWhale (packages codewhale / codewhale-tui) versions >= 0.8.41 and < 0.8.64 contain a remote code execution vulnerability in the rlm_eval tool. The tool's approval_requirement() returns ApprovalRequirement::Auto, which the engine treats as 'never prompt,' causing arbitrary model-supplied Python code to run in a python3 interpreter without consulting the user's configured --approval-policy and without any approval prompt or audit step. An attacker can induce the agent to execute arbitrary code via prompt injection in untrusted content the agent reads (a web page, fetched URL, repository file, or MCP tool result); the companion rlm_open tool can stage such content. Code runs on the user's machine at the user's privilege level. Fixed in 0.8.64.

🎖@cveNotify

🚨 CVE-2026-75859
CodeWhale versions before 0.8.64 fail to validate file paths in the project config instructions field, allowing attackers to read arbitrary files on the victim's system. A malicious .codewhale/config.toml file in a cloned repository can specify paths outside the workspace that are read and injected into the AI system prompt for exfiltration.

🎖@cveNotify

🚨 CVE-2026-75911
CodeWhale versions before 0.8.64 fail to properly validate the allow_shell configuration parameter from project config files, allowing attackers to enable arbitrary shell command execution by committing a malicious .codewhale/config.toml file to a repository. When a user clones and opens the repository in CodeWhale, the AI model gains access to exec_shell and task_shell tools, enabling execution of arbitrary shell commands on the victim's machine without explicit user consent.

🎖@cveNotify

🚨 CVE-2026-75912
CodeWhale versions before 0.8.64 contain an argument injection vulnerability in the git_blame tool that allows attackers to read arbitrary files by injecting git options into the unvalidated rev parameter. Attackers can supply rev values like --contents=/path/to/file to exfiltrate sensitive files such as SSH keys and credentials through the tool output returned to the model.

🎖@cveNotify

🚨 CVE-2026-75913
CodeWhale (codewhale / codewhale-tui) versions >= 0.8.41 and < 0.8.64 contain an argument injection vulnerability in the git_show tool. The model-supplied rev parameter is passed unvalidated into the git show argv without an --end-of-options sentinel, so a value beginning with --output= is interpreted as a git flag. Because the tool is registered as auto-approved and advertised as read-only, an attacker (via a malicious repository combined with prompt injection) can cause an unprompted arbitrary file write at the privilege of the invoking user, targeting sensitive files such as ~/.ssh/authorized_keys, ~/.bashrc, or ~/.gitconfig. Fixed in 0.8.64 by adding rev validation.

🎖@cveNotify

🚨 CVE-2026-75914
CodeWhale versions before 0.8.64 contain a path traversal vulnerability in the image_analyze tool that fails to canonicalize symlinks before reading files. Attackers can create workspace symlinks pointing to external files with image extensions to leak file bytes to the vision endpoint without user approval.

🎖@cveNotify

🚨 CVE-2026-75915
CodeWhale versions before 0.8.64 contain an environment variable exposure vulnerability in the js_execution tool that fails to scrub parent process environment variables before spawning Node.js. Attackers can craft malicious JavaScript code executed by the tool to read process.env and leak API keys, cloud credentials, and authentication tokens back to the model context.

🎖@cveNotify

🚨 CVE-2026-75926
Hugo 0.161.0 placed the Node asset pipelines behind the Node.js permission model so that code running through PostCSS, Babel, or TailwindCSS could not reach the file system outside the project directory. Hugo 0.162.0 added tailwindcss to the AllowChildProcess default in config/security/securityConfig.go, which makes nodePermissionArgs in common/hexec/exec.go append --allow-child-process whenever the tool being launched is named tailwindcss. TailwindCSS loads the site's tailwind.config.js through require at startup, so top-level code in that file executes inside the permitted Node process and can call child_process to spawn a shell. The spawned process is not a Node process and inherits none of the permission flags, so it runs with the full privileges of the account performing the build. Building a site whose theme, module, or starter template supplies the Tailwind configuration therefore yields arbitrary command execution rather than the confined file access the permission model was introduced to enforce. Hugo 0.165.0 removes tailwindcss from the default security.exec.allow list, so the tool is no longer launched under the default configuration.

🎖@cveNotify

🚨 CVE-2026-3429
A flaw was identified in the Account REST API of Keycloak that allows a user authenticated at a lower security level to perform sensitive actions intended only for higher-assurance sessions. Specifically, an attacker who has already obtained a victim’s password can delete the victim’s registered MFA/OTP credential without first proving possession of that factor. The attacker can then register their own MFA device, effectively taking full control of the account. This weakness undermines the intended protection provided by multi-factor authentication.

🎖@cveNotify

🚨 CVE-2026-2366
A flaw was found in Keycloak. An authorization bypass vulnerability in the Keycloak Admin API allows any authenticated user, even those without administrative privileges, to enumerate the organization memberships of other users. This information disclosure occurs if the attacker knows the victim's unique identifier (UUID) and the Organizations feature is enabled.

🎖@cveNotify

🚨 CVE-2026-49987
Repomix is a tool that packs repositories into AI-friendly files. Prior to 1.14.1, src/core/git/gitCommand.ts execGitShallowClone passes the --remote-branch value directly to git fetch and git checkout without validation or --end-of-options, allowing --upload-pack or other Git option injection that bypasses validateGitUrl() dangerous parameter checks and can execute commands through local or SSH-style transports. This issue is fixed in version 1.14.1.

🎖@cveNotify

🚨 CVE-2026-49988
Repomix is a tool that packs repositories into AI-friendly files. Prior to 1.14.1, the Repomix MCP server attach_packed_output and read_repomix_output flow can register and read arbitrary local .json, .txt, .md, or .xml files without the file_system_read_file runSecretLint() safety check or Repomix packed-output validation, allowing MCP callers to bypass the local file-read secret-scanning boundary. This issue is fixed in version 1.14.1.

🎖@cveNotify

🚨 CVE-2026-68742
A flaw was found in SSSD. The sss_nss_protocol_parse_addr() function in the NSS responder does not validate the addrlen field against the remaining packet body size. A local attacker can exploit this via a crafted GETHOSTBYADDR request to the NSS responder socket, causing an out-of-bounds read and process crash, resulting in a denial of service.

🎖@cveNotify

🚨 CVE-2026-18508
A flaw was found in GNU tar. When extracting an archive with the --one-top-level option, hardlink targets are not confined to the designated top-level directory and may resolve relative to the extraction working directory. A crafted archive can create hardlinks that escape the intended boundary and, when combined with a preexisting symbolic link under the working directory, may allow writing outside that boundary during a single extraction.

🎖@cveNotify

🚨 CVE-2026-68744
A flaw was found in SSSD. The sss_nss_protocol_fill_initgr() function in the NSS responder pre-allocates reply space for all group entries but does not shrink the packet when groups are skipped, causing uninitialized heap bytes to be transmitted to the client. A local attacker can exploit this to disclose cached directory data and heap layout information from the sssd_nss process.

🎖@cveNotify

🚨 CVE-2026-15307
An issue was discovered in Django 5.2 before 5.2.17 and 6.0 before 6.0.8.
GeoDjango spatial lookups optimistically parse the right-hand-side value as a raster by passing it to the `django.contrib.gis.gdal.GDALRaster` constructor. Any value used in a spatial lookup against a `GeometryField` or `RasterField` reaches this constructor, including untrusted input, for example a spatial-field filter submitted through the Django admin changelist query string by a staff user with view permission. A `dict`, or a `str` holding its JSON representation, is opened in write mode regardless of the constructor's `write=False` default, allowing a file with an attacker-chosen name and contents to be written through a file-backed GDAL driver. Any other `str` is treated as a datasource, allowing an outbound network request through a GDAL virtual filesystem handler. Writing a file to a location later imported by the application can result in remote code execution.
Earlier, unsupported Django series (such as 5.1.x, 5.0.x, and 4.2.x) were not evaluated and may also be affected.
Django would like to thank Bence Nagy, localhost-detect, and kimchunbok_ for reporting this issue.

🎖@cveNotify