🚨 CVE-2026-44249
Netty is a network application framework for development of protocol servers and clients. In netty-handler prior to versions 4.1.135.Final and 4.2.15.Final, an attacker can bypass IPv6 subnet rules due to an incorrect masking operation in IpSubnetFilterRule.compareTo(). Valid public IP addresses can bypass the restrictions. Versions 4.1.135.Final and 4.2.15.Final patch the issue.

🎖@cveNotify

🚨 CVE-2026-45416
Netty is a network application framework for development of protocol servers and clients. Prior to versions 4.1.135.Final and 4.2.15.Final, SslClientHelloHandler.decode() reads the 24-bit TLS handshake length and, when the ClientHello does not fit in the first record, eagerly allocates `ctx.alloc().buffer(handshakeLength)` (line 161). The guard at line 140 is `handshakeLength > maxClientHelloLength && maxClientHelloLength != 0`, and the commonly-used SniHandler/AbstractSniHandler constructors (SniHandler(Mapping), SniHandler(AsyncMapping), AbstractSniHandler()) pass maxClientHelloLength=0 and handshakeTimeoutMillis=0, so the length guard is disabled and no timeout is scheduled. A 16 MiB request exceeds the default pooled chunk size and becomes a huge/unpooled allocation performed immediately. The buffer is retained in the handler until the channel closes. Versions 4.1.135.Final and 4.2.15.Final patch the issue.

🎖@cveNotify

🚨 CVE-2026-50010
Netty is a network application framework for development of protocol servers and clients. Prior to versions 4.1.135.Final and 4.2.15.Final, SimpleTrustManagerFactory.engineGetTrustManagers() and related paths wrap any user-supplied plain X509TrustManager in X509TrustManagerWrapper, which extends X509ExtendedTrustManager but implements the 3-arg checkServerTrusted(chain, authType, SSLEngine) by discarding the SSLEngine and calling the 2-arg delegate. Because the object now IS an X509ExtendedTrustManager, neither SunJSSE's internal AbstractTrustManagerWrapper nor Netty's own OpenSslX509TrustManagerWrapper will re-wrap it to add endpoint-identification. Consequently, even though Netty 4.2 sets endpointIdentificationAlgorithm="HTTPS" by default, a client built with `SslContextBuilder.forClient().trustManager(somePlainX509TrustManager)` performs no hostname verification at all. Versions 4.1.135.Final and 4.2.15.Final patch the issue.

🎖@cveNotify

🚨 CVE-2026-12143
form-data is a library for creating readable multipart/form-data streams. In versions through 4.0.5, the `field` argument to `FormData#append` and the `filename` option are concatenated verbatim into the `Content-Disposition` header without escaping carriage return (CR), line feed (LF), or double-quote (") characters. An application that passes attacker-controlled data as a field name or filename (for example, an API gateway that turns JSON object keys into multipart field names) allows the attacker to terminate the header line and inject additional headers, or to smuggle entire additional multipart parts, into the request the application forwards to a backend. This can let the attacker add or override form fields (e.g. set `is_admin=true`) seen by the downstream parser. This is an instance of CWE-93 (CRLF injection). The fix escapes CR, LF, and `"` as `%0D`, `%0A`, and `%22` in field names and filenames, matching the serialization browsers use per the WHATWG HTML multipart/form-data encoding algorithm. Exploitation requires the consuming application to use untrusted input as a field name or filename; applications that use only fixed/trusted field names are not affected. Fixed in 2.5.6, 3.0.5, and 4.0.6.

🎖@cveNotify

🚨 CVE-2026-44990
ApostropheCMS is an open-source Node.js content management system, and sanitize-html provides a simple HTML sanitizer with a clear API. Under the default configuration, versions of `sanitize-html` prior to 2.17.4 can turn attacker-controlled content inside a disallowed `xmp` element into live HTML or JavaScript. This is a sanitizer bypass in the default `disallowedTagsMode: 'discard'` path and can lead to stored XSS in applications that render sanitized output back to users. Version 2.17.4 patches the issue.

🎖@cveNotify

🚨 CVE-2026-48779
ws is an open source WebSocket client and server for Node.js. All versions from 1.1.0 up to (but not including) 5.2.5, from 6.0.0 up to 6.2.4, from 7.0.0 up to 7.5.11, and from 8.0.0 up to 8.21.0 are affected by a memory exhaustion DoS vulnerability. A peer can send a high volume of exceptionally small fragments and data chunks, with modest network traffic, to force the remote peer into allocating and holding structural wrappers that consume far more memory than the default documented message-size limit, leading to process termination due to OOM. This issue has been fixed in versions 5.2.5, 6.2.4, 7.5.11, and 8.21.0.

🎖@cveNotify

🚨 CVE-2026-12151
Impact:
The undici WebSocket client enforces maxPayloadSize on the cumulative byte count of fragments in a message but does not enforce a limit on the number of fragments. A malicious WebSocket server can stream many small or empty continuation frames that each pass per-frame and cumulative-size validation, collectively causing unbounded memory growth in the client process. The result is memory exhaustion and a denial of service.

Affected applications are those using the undici WebSocket client (new WebSocket(...)) or the WebSocketStream API that can be induced to connect to an attacker-controlled or compromised WebSocket endpoint.

All releases starting at undici 6.17.0 are affected.

Patches: Upgrade to undici >= 6.26.0, >= 7.28.0, or >= 8.5.0. Workarounds:
No workaround is available. The fix must be applied through an upgrade.

🎖@cveNotify

🚨 CVE-2026-53000
In the Linux kernel, the following vulnerability has been resolved:

netfilter: nat: use kfree_rcu to release ops

Florian Westphal says:

"Historically this is not an issue, even for normal base hooks: the data
path doesn't use the original nf_hook_ops that are used to register the
callbacks.

However, in v5.14 I added the ability to dump the active netfilter
hooks from userspace.

This code will peek back into the nf_hook_ops that are available
at the tail of the pointer-array blob used by the datapath.

The nat hooks are special, because they are called indirectly from
the central nat dispatcher hook. They are currently invisible to
the nfnl hook dump subsystem though.

But once that changes the nat ops structures have to be deferred too."

Update nf_nat_register_fn() to deal with partial exposition of the hooks
from error path which can be also an issue for nfnetlink_hook.

🎖@cveNotify

🚨 CVE-2026-53059
In the Linux kernel, the following vulnerability has been resolved:

dm log: fix out-of-bounds write due to region_count overflow

The local variable region_count in create_log_context() is declared as
unsigned int (32-bit), but dm_sector_div_up() returns sector_t (64-bit).
When a device-mapper target has a sufficiently large ti->len with a small
region_size, the division result can exceed UINT_MAX. The truncated
value is then used to calculate bitset_size, causing clean_bits,
sync_bits, and recovering_bits to be allocated far smaller than needed
for the actual number of regions.

Subsequent log operations (log_set_bit, log_clear_bit, log_test_bit) use
region indices derived from the full untruncated region space, causing
out-of-bounds writes to kernel heap memory allocated by vmalloc.

This can be reproduced by creating a mirror target whose region_count
overflows 32 bits:

dmsetup create bigzero --table '0 8589934594 zero'
dmsetup create mymirror --table '0 8589934594 mirror \
core 2 2 nosync 2 /dev/mapper/bigzero 0 \
/dev/mapper/bigzero 0'

The status output confirms the truncation (sync_count=1 instead of
4294967297, because 0x100000001 was truncated to 1):

$ dmsetup status mymirror
0 8589934594 mirror 2 254:1 254:1 1/4294967297 ...

This leads to a kernel crash in core_in_sync:

BUG: scheduling while atomic: (udev-worker)/9150/0x00000000
RIP: 0010:core_in_sync+0x14/0x30 [dm_log]
CR2: 0000000000000008
Fixing recursive fault but reboot is needed!

Fix by widening the local region_count to sector_t and adding an
explicit overflow check before the value is assigned to lc->region_count.

🎖@cveNotify

🚨 CVE-2026-58049
FFmpeg's RASC video decoder (decode_dlta in libavcodec/rasc.c) performs 32-bit reads and writes at the row cursor before the NEXT_LINE row-boundary check and validates the DLTA region in pixel rather than byte units, so a DLTA run on a PAL8 frame can access several bytes past the row allocation. A crafted media stream using the RASC FourCC, decoded by libavcodec, triggers a bitstream-controlled out-of-bounds heap write and adjacent out-of-bounds read, leading to memory corruption.

🎖@cveNotify

🚨 CVE-2026-13676
fast-uri versions 2.3.1 through 3.1.2 and 4.0.0 fail to canonicalize Unicode (IDN) hostnames for HTTP-family URLs. The IDN conversion path calls a helper that does not exist on the global URL constructor, silently leaving the host in its original Unicode form while normalize() and equal() still return values that differ from a WHATWG-compatible URL parser. Applications that use fast-uri to enforce host-based policy (denylists, loopback filtering, redirect validation, outbound proxy routing) before passing the same URL to Node's URL or fetch can be bypassed when the two implementations resolve the same input to different hosts. Patches: upgrade to fast-uri 3.1.3 for the 3.x line or 4.0.1 for the 4.x line. Workarounds: enforce host policy using the same URL parser used for the actual request, or reject non-ASCII hosts before policy checks.

🎖@cveNotify

🚨 CVE-2026-54369
acl before version 2.4.0 contains a symlink traversal vulnerability in the libacl pathname-based functions acl_get_file(), acl_set_file(), acl_extended_file(), and acl_delete_def_file() that allows local attackers to escalate privileges by replacing any pathname component with a symbolic link. Attackers who control any component of a pathname processed by a privileged caller can redirect ACL read or write operations to arbitrary files or directories, enabling unauthorized manipulation of access control lists and local privilege escalation.

🎖@cveNotify

🚨 CVE-2026-54123
Exposure of sensitive information to an unauthorized actor in Microsoft Defender for Endpoint allows an authorized attacker to disclose information locally.

🎖@cveNotify

🚨 CVE-2026-49304
Permission control vulnerability in the device key management module. Impact: Successful exploitation of this vulnerability may affect availability.

🎖@cveNotify

🚨 CVE-2026-58561
Null pointer dereference issue in the image codec module. Impact: Successful exploitation of this vulnerability may affect availability.

🎖@cveNotify

🚨 CVE-2026-40126
OutSystems Service Center is vulnerable to a DOM-based Cross-Site Scripting (XSS) attack that can be exploited by a low-privileged attacker via the upload of a file with a malicious filename containing JavaScript code. The vulnerability exists in all locations where a file can be attached and prepared for upload to the server.

This issue was fixed in OutSystems Service Center version 11.41.2

🎖@cveNotify

🚨 CVE-2026-74843
A vulnerability was determined in Wavlink WN531P3 and WN535M1 V250922. Affected by this vulnerability is the function strcpy of the file /etc/lighttpd/www/cgi-bin/export_pingortrace.cgi of the component Export Pingortrace CGI. Executing a manipulation of the argument HTTP_COOKIE can lead to stack-based buffer overflow. The attack may be launched remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure.

🎖@cveNotify

🚨 CVE-2026-20289
A vulnerability in the logging subsystem of Cisco RoomOS could allow an authenticated, local attacker with low privileges to access sensitive information.

This vulnerability is due to the logging of sensitive information. An attacker could exploit this vulnerability by enabling a specific logging level and then collecting the system logs. A successful exploit could allow the attacker to view sensitive information like user login credentials.

🎖@cveNotify

🚨 CVE-2026-58650
Authorization bypass through user-controlled key in Visual Studio Code allows an unauthorized attacker to bypass a security feature locally.

🎖@cveNotify

🚨 CVE-2026-59113
Missing authorization in Visual Studio Code allows an unauthorized attacker to execute code over a network.

🎖@cveNotify

🚨 CVE-2026-19556
Use after free in V8 in Google Chrome prior to 151.0.7922.137 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High)

🎖@cveNotify