🚨 CVE-2026-74571
In the Linux kernel, the following vulnerability has been resolved:
btrfs: skip global block reserve accounting for rescue mounts
[BUG]
Mounting with rescue=ibadroots after corrupting the block group tree
root triggers a NULL pointer dereference:
BUG: kernel NULL pointer dereference, address: 0000000000000100
RIP: 0010:btrfs_update_global_block_rsv+0x9d/0x1c0 [btrfs]
Call Trace:
fill_dummy_bgs+0xd4/0x120 [btrfs]
open_ctree+0xc6e/0x1ca0 [btrfs]
btrfs_get_tree+0x50d/0xa40 [btrfs]
The same crash occurs with a corrupted raid stripe tree root, via
btrfs_read_block_groups() instead of fill_dummy_bgs().
[CAUSE]
With rescue=ibadroots, btrfs_read_roots() allows the mount to continue
when either root cannot be read, leaving the corresponding root pointer
NULL while its on-disk feature bit remains set.
btrfs_update_global_block_rsv() then dereferences the missing root based
on the feature bit alone.
[FIX]
Rescue mounts are fully read-only and cannot start transactions, so the
global reserve is never consumed. Under btrfs_is_full_ro(), mark the
reserve as full and return before performing the accounting.
And since we need to check if the fs is mount fully RO, export
fs_is_full_ro() as btrfs_is_full_ro(), and move it to fs.h.
[ Squash the fs_is_full_ro() export commit into this one. ]
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
btrfs: skip global block reserve accounting for rescue mounts
[BUG]
Mounting with rescue=ibadroots after corrupting the block group tree
root triggers a NULL pointer dereference:
BUG: kernel NULL pointer dereference, address: 0000000000000100
RIP: 0010:btrfs_update_global_block_rsv+0x9d/0x1c0 [btrfs]
Call Trace:
fill_dummy_bgs+0xd4/0x120 [btrfs]
open_ctree+0xc6e/0x1ca0 [btrfs]
btrfs_get_tree+0x50d/0xa40 [btrfs]
The same crash occurs with a corrupted raid stripe tree root, via
btrfs_read_block_groups() instead of fill_dummy_bgs().
[CAUSE]
With rescue=ibadroots, btrfs_read_roots() allows the mount to continue
when either root cannot be read, leaving the corresponding root pointer
NULL while its on-disk feature bit remains set.
btrfs_update_global_block_rsv() then dereferences the missing root based
on the feature bit alone.
[FIX]
Rescue mounts are fully read-only and cannot start transactions, so the
global reserve is never consumed. Under btrfs_is_full_ro(), mark the
reserve as full and return before performing the accounting.
And since we need to check if the fs is mount fully RO, export
fs_is_full_ro() as btrfs_is_full_ro(), and move it to fs.h.
[ Squash the fs_is_full_ro() export commit into this one. ]
🎖@cveNotify
🚨 CVE-2026-74572
In the Linux kernel, the following vulnerability has been resolved:
btrfs: zoned: fix deadlock between metadata writeback and transaction commit
When writing out metadata extent buffers in a zoned filesystem,
btree_writepages() holds fs_info->zoned_meta_io_lock across the whole
writeback loop, including the call to btrfs_check_meta_write_pointer() ->
check_bg_is_active().
For the tree-log block group, check_bg_is_active() may fail to activate
the zone and fall back to btrfs_zone_finish_one_bg() to free an active
zone. That path waits for the running transaction to commit while still
holding zoned_meta_io_lock, but the committer needs that same lock to
write out the tree extents, so the two tasks deadlock:
Task A (kworker, metadata writeback) Task B (fsstress, transaction commit)
------------------------------------ -------------------------------------
wb_workfn() btrfs_commit_transaction(T)
btree_writepages() btrfs_write_and_wait_transaction()
btrfs_zoned_meta_io_lock() btrfs_write_marked_extents()
btrfs_check_meta_write_pointer() btree_writepages()
check_bg_is_active() [treelog_bg] btrfs_zoned_meta_io_lock()
btrfs_zone_finish_one_bg() <blocks on zoned_meta_io_lock,
btrfs_zone_finish() held by Task A>
do_zone_finish()
btrfs_inc_block_group_ro()
btrfs_wait_for_commit()
<blocks waiting for commit
of transaction T, done by
Task B>
The sibling branch in check_bg_is_active() already drops zoned_meta_io_lock
around do_zone_finish() for this exact reason. Do the same in the tree-log
branch: release the lock around btrfs_zone_finish_one_bg() and re-acquire
it afterwards. The lock only protects fs_info->active_{meta,system}_bg,
which this branch does not touch, and ctx->zoned_bg keeps a reference to
the block group across the unlock, so nothing is lost while the lock
is dropped.
This hang occasionally reproduces with fstests generic/475 on a zoned
btrfs filesystem.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
btrfs: zoned: fix deadlock between metadata writeback and transaction commit
When writing out metadata extent buffers in a zoned filesystem,
btree_writepages() holds fs_info->zoned_meta_io_lock across the whole
writeback loop, including the call to btrfs_check_meta_write_pointer() ->
check_bg_is_active().
For the tree-log block group, check_bg_is_active() may fail to activate
the zone and fall back to btrfs_zone_finish_one_bg() to free an active
zone. That path waits for the running transaction to commit while still
holding zoned_meta_io_lock, but the committer needs that same lock to
write out the tree extents, so the two tasks deadlock:
Task A (kworker, metadata writeback) Task B (fsstress, transaction commit)
------------------------------------ -------------------------------------
wb_workfn() btrfs_commit_transaction(T)
btree_writepages() btrfs_write_and_wait_transaction()
btrfs_zoned_meta_io_lock() btrfs_write_marked_extents()
btrfs_check_meta_write_pointer() btree_writepages()
check_bg_is_active() [treelog_bg] btrfs_zoned_meta_io_lock()
btrfs_zone_finish_one_bg() <blocks on zoned_meta_io_lock,
btrfs_zone_finish() held by Task A>
do_zone_finish()
btrfs_inc_block_group_ro()
btrfs_wait_for_commit()
<blocks waiting for commit
of transaction T, done by
Task B>
The sibling branch in check_bg_is_active() already drops zoned_meta_io_lock
around do_zone_finish() for this exact reason. Do the same in the tree-log
branch: release the lock around btrfs_zone_finish_one_bg() and re-acquire
it afterwards. The lock only protects fs_info->active_{meta,system}_bg,
which this branch does not touch, and ctx->zoned_bg keeps a reference to
the block group across the unlock, so nothing is lost while the lock
is dropped.
This hang occasionally reproduces with fstests generic/475 on a zoned
btrfs filesystem.
🎖@cveNotify
🚨 CVE-2026-74573
In the Linux kernel, the following vulnerability has been resolved:
iommu/arm-smmu-v3-iommufd: Require exactly one Stream ID for a vDEVICE
arm_vsmmu_vsid_to_sid() maps a guest's vSID to a single physical Stream ID
taken from master->streams[0], assuming a device has exactly one stream. A
device with several streams gets only its first one mapped, so a guest vSID
invalidation cannot reach the others' ATC and IOTLB entries; a device with
none makes master->streams a ZERO_SIZE_PTR, read out of bounds.
Add an arm_vsmmu_vdevice_init() op to reject the vDEVICE with -EOPNOTSUPP
when master->num_streams is not one, rather than mapping it silently.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
iommu/arm-smmu-v3-iommufd: Require exactly one Stream ID for a vDEVICE
arm_vsmmu_vsid_to_sid() maps a guest's vSID to a single physical Stream ID
taken from master->streams[0], assuming a device has exactly one stream. A
device with several streams gets only its first one mapped, so a guest vSID
invalidation cannot reach the others' ATC and IOTLB entries; a device with
none makes master->streams a ZERO_SIZE_PTR, read out of bounds.
Add an arm_vsmmu_vdevice_init() op to reject the vDEVICE with -EOPNOTSUPP
when master->num_streams is not one, rather than mapping it silently.
🎖@cveNotify
🚨 CVE-2026-74574
In the Linux kernel, the following vulnerability has been resolved:
dmaengine: idxd: fix fdev setup failure cleanup in idxd_cdev_open()
The failed_dev_add and failed_dev_name paths drop the file-device
reference while wq->wq_lock is still held. If put_device(fdev) drops the
last reference, idxd_file_dev_release() runs synchronously and tries to
take wq->wq_lock again, deadlocking.
Those paths also fall through into the later ctx cleanup labels even
though idxd_file_dev_release() owns that cleanup and frees ctx. This can
make idxd_xa_pasid_remove(ctx) and kfree(ctx) operate on a freed context.
Move idxd_wq_get() before file-device setup can fail, since the release
callback always calls idxd_wq_put(). Then unlock wq->wq_lock before
put_device(fdev) and return directly from the file-device setup failure
path, leaving ctx cleanup to the release callback.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
dmaengine: idxd: fix fdev setup failure cleanup in idxd_cdev_open()
The failed_dev_add and failed_dev_name paths drop the file-device
reference while wq->wq_lock is still held. If put_device(fdev) drops the
last reference, idxd_file_dev_release() runs synchronously and tries to
take wq->wq_lock again, deadlocking.
Those paths also fall through into the later ctx cleanup labels even
though idxd_file_dev_release() owns that cleanup and frees ctx. This can
make idxd_xa_pasid_remove(ctx) and kfree(ctx) operate on a freed context.
Move idxd_wq_get() before file-device setup can fail, since the release
callback always calls idxd_wq_put(). Then unlock wq->wq_lock before
put_device(fdev) and return directly from the file-device setup failure
path, leaving ctx cleanup to the release callback.
🎖@cveNotify
🚨 CVE-2026-74575
In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Prevent XDomain delayed work use-after-free on disconnect
tb_xdp_handle_request() runs on system_wq and queues
xd->state_work via queue_delayed_work() in three request handlers:
PROPERTIES_CHANGED_REQUEST, UUID_REQUEST (via start_handshake),
and LINK_STATE_CHANGE_REQUEST. Similarly, update_xdomain() queues
xd->properties_changed_work when local properties change.
Concurrently, tb_xdomain_remove() calls stop_handshake() which does
cancel_delayed_work_sync() on both delayed works. Later,
tb_xdomain_unregister() calls device_unregister() which eventually
frees the xdomain. Since commit 559c1e1e0134 ("thunderbolt: Run
tb_xdp_handle_request() in system workqueue") moved the request
handler off tb->wq, the handler and the remove path are no longer
serialized. If queue_delayed_work() executes after
cancel_delayed_work_sync() but before the xdomain is freed, the
delayed work fires on a freed object.
Add xd->removing that tb_xdomain_remove() sets under xd->lock
before calling stop_handshake(). Each external queue site holds
the same lock and checks removing before calling
queue_delayed_work(). This provides the mutual exclusion needed:
either the queue site acquires the lock first and queues work that
the subsequent cancel will see, or the remove path acquires the
lock first and the queue site observes removing == true and skips
the queue.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Prevent XDomain delayed work use-after-free on disconnect
tb_xdp_handle_request() runs on system_wq and queues
xd->state_work via queue_delayed_work() in three request handlers:
PROPERTIES_CHANGED_REQUEST, UUID_REQUEST (via start_handshake),
and LINK_STATE_CHANGE_REQUEST. Similarly, update_xdomain() queues
xd->properties_changed_work when local properties change.
Concurrently, tb_xdomain_remove() calls stop_handshake() which does
cancel_delayed_work_sync() on both delayed works. Later,
tb_xdomain_unregister() calls device_unregister() which eventually
frees the xdomain. Since commit 559c1e1e0134 ("thunderbolt: Run
tb_xdp_handle_request() in system workqueue") moved the request
handler off tb->wq, the handler and the remove path are no longer
serialized. If queue_delayed_work() executes after
cancel_delayed_work_sync() but before the xdomain is freed, the
delayed work fires on a freed object.
Add xd->removing that tb_xdomain_remove() sets under xd->lock
before calling stop_handshake(). Each external queue site holds
the same lock and checks removing before calling
queue_delayed_work(). This provides the mutual exclusion needed:
either the queue site acquires the lock first and queues work that
the subsequent cancel will see, or the remove path acquires the
lock first and the queue site observes removing == true and skips
the queue.
🎖@cveNotify
🚨 CVE-2026-74576
In the Linux kernel, the following vulnerability has been resolved:
mm/slab: prevent unbounded recursion in free path with new kmalloc type
Commit 280ea9c3154b ("mm/slab: avoid allocating slabobj_ext array from
its own slab") avoided recursive allocation of obj_exts from kmalloc
caches of the same size, by bumping the obj_exts array's allocation
size whenever the array size equals the size of the object being
allocated.
However, as reported by Danielle Costantino and Shakeel Butt,
even slabs from kmalloc caches of different sizes can form a cycle
by allocating obj_exts arrays from each other [1]:
What happened: a KMALLOC_NORMAL slab's obj_exts array (used by
allocation profiling / memcg accounting) is itself kmalloc()'d from a
KMALLOC_NORMAL cache, so the "slab holds another slab's obj_exts array"
relation can form cycles. With sizeof(struct slabobj_ext) == 16 and
the host's geometry:
- kmalloc-512 has 64 objects/slab -> array is 64*16 == 1024 bytes,
served from kmalloc-1k;
- kmalloc-1k has 32 objects/slab -> array is 32*16 == 512 bytes,
served from kmalloc-512.
A kmalloc-512 slab and a kmalloc-1k slab therefore hold each other's
obj_exts array. Discarding one frees the other's array, which empties
and discards that slab, which frees the first's array, and so on:
__free_slab() -> free_slab_obj_exts() -> kfree() -> discard_slab() ->
__free_slab() recurses along the cycle until the stack is exhausted.
With memory allocation profiling, this allows unbounded recursion
in the free path and led to a stack overflow on a production host in
the Meta fleet [1]:
BUG: TASK stack guard page was hit
Oops: stack guard page
RIP: 0010:kfree+0x8/0x5d0
Call Trace:
__free_slab+0x66/0xc0
kfree+0x3f0/0x5d0
... ( ~125x __free_slab <-> kfree ) ...
<kernel driver freeing a resource>
do_syscall_64
It is proposed [1] to resolve this issue by always serving the obj_exts
array allocation from kmalloc caches (or large kmalloc) of sizes larger
than the object size. However, as pointed out by Vlastimil Babka [2],
this can waste an excessive amount of memory as slabs from large
kmalloc sizes (e.g. kmalloc-8k) generally need obj_exts arrays much
smaller than the object size.
Therefore, rather than bumping the size, let us take a different
approach; disallow formation of cycles between kmalloc types when
allocating obj_exts arrays. Currently, all obj_exts arrays are served
from normal kmalloc caches. Cycles cannot be created if obj_exts arrays
of normal kmalloc caches are served from a special kmalloc type that can
never have obj_exts arrays.
To achieve this, create a new kmalloc type called KMALLOC_NO_OBJ_EXT.
KMALLOC_NO_OBJ_EXT caches are created with SLAB_NO_OBJ_EXT flag when
either 1) memory allocation profiling is not permanently disabled,
or 2) kmalloc types with a priority higher than KMALLOC_CGROUP are
aliased with KMALLOC_NORMAL.
Sheaf bootstrapping for KMALLOC_NO_OBJ_EXT caches now must be deferred
because allocation of a barn can trigger obj_exts array allocation of
normal kmalloc caches when the KMALLOC_NO_OBJ_EXT cache for that size
is not ready yet. For simplicity, perform bootstrapping of sheaves for
all kmalloc caches later.
Introduce a new slab alloc flag, SLAB_ALLOC_NO_OBJ_EXT, to prevent
allocation of obj_exts arrays, and let kmalloc_slab() override the type
to KMALLOC_NO_OBJ_EXT when specified. Note that kmalloc_type() remains
unchanged because kmalloc_flags() bypasses the kmalloc fastpath.
Do not pass SLAB_ALLOC_NO_RECURSE to kmalloc_flags() in
alloc_slab_obj_exts() and instead use SLAB_ALLOC_NO_OBJ_EXT only when
the objects are allocated from normal kmalloc caches. While this
prevents unbounded recursive allocation of obj_exts, it allows
KMALLOC_NO_OBJ_EXT caches to have sheaves.
Since sheaf allocations specify SLAB_ALLOC_NO_RECURSE that prevents
allocation of both sheaves and obj_exts arrays, the recursion depth
is bounded.
obj_exts arrays for non-
---truncated---
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
mm/slab: prevent unbounded recursion in free path with new kmalloc type
Commit 280ea9c3154b ("mm/slab: avoid allocating slabobj_ext array from
its own slab") avoided recursive allocation of obj_exts from kmalloc
caches of the same size, by bumping the obj_exts array's allocation
size whenever the array size equals the size of the object being
allocated.
However, as reported by Danielle Costantino and Shakeel Butt,
even slabs from kmalloc caches of different sizes can form a cycle
by allocating obj_exts arrays from each other [1]:
What happened: a KMALLOC_NORMAL slab's obj_exts array (used by
allocation profiling / memcg accounting) is itself kmalloc()'d from a
KMALLOC_NORMAL cache, so the "slab holds another slab's obj_exts array"
relation can form cycles. With sizeof(struct slabobj_ext) == 16 and
the host's geometry:
- kmalloc-512 has 64 objects/slab -> array is 64*16 == 1024 bytes,
served from kmalloc-1k;
- kmalloc-1k has 32 objects/slab -> array is 32*16 == 512 bytes,
served from kmalloc-512.
A kmalloc-512 slab and a kmalloc-1k slab therefore hold each other's
obj_exts array. Discarding one frees the other's array, which empties
and discards that slab, which frees the first's array, and so on:
__free_slab() -> free_slab_obj_exts() -> kfree() -> discard_slab() ->
__free_slab() recurses along the cycle until the stack is exhausted.
With memory allocation profiling, this allows unbounded recursion
in the free path and led to a stack overflow on a production host in
the Meta fleet [1]:
BUG: TASK stack guard page was hit
Oops: stack guard page
RIP: 0010:kfree+0x8/0x5d0
Call Trace:
__free_slab+0x66/0xc0
kfree+0x3f0/0x5d0
... ( ~125x __free_slab <-> kfree ) ...
<kernel driver freeing a resource>
do_syscall_64
It is proposed [1] to resolve this issue by always serving the obj_exts
array allocation from kmalloc caches (or large kmalloc) of sizes larger
than the object size. However, as pointed out by Vlastimil Babka [2],
this can waste an excessive amount of memory as slabs from large
kmalloc sizes (e.g. kmalloc-8k) generally need obj_exts arrays much
smaller than the object size.
Therefore, rather than bumping the size, let us take a different
approach; disallow formation of cycles between kmalloc types when
allocating obj_exts arrays. Currently, all obj_exts arrays are served
from normal kmalloc caches. Cycles cannot be created if obj_exts arrays
of normal kmalloc caches are served from a special kmalloc type that can
never have obj_exts arrays.
To achieve this, create a new kmalloc type called KMALLOC_NO_OBJ_EXT.
KMALLOC_NO_OBJ_EXT caches are created with SLAB_NO_OBJ_EXT flag when
either 1) memory allocation profiling is not permanently disabled,
or 2) kmalloc types with a priority higher than KMALLOC_CGROUP are
aliased with KMALLOC_NORMAL.
Sheaf bootstrapping for KMALLOC_NO_OBJ_EXT caches now must be deferred
because allocation of a barn can trigger obj_exts array allocation of
normal kmalloc caches when the KMALLOC_NO_OBJ_EXT cache for that size
is not ready yet. For simplicity, perform bootstrapping of sheaves for
all kmalloc caches later.
Introduce a new slab alloc flag, SLAB_ALLOC_NO_OBJ_EXT, to prevent
allocation of obj_exts arrays, and let kmalloc_slab() override the type
to KMALLOC_NO_OBJ_EXT when specified. Note that kmalloc_type() remains
unchanged because kmalloc_flags() bypasses the kmalloc fastpath.
Do not pass SLAB_ALLOC_NO_RECURSE to kmalloc_flags() in
alloc_slab_obj_exts() and instead use SLAB_ALLOC_NO_OBJ_EXT only when
the objects are allocated from normal kmalloc caches. While this
prevents unbounded recursive allocation of obj_exts, it allows
KMALLOC_NO_OBJ_EXT caches to have sheaves.
Since sheaf allocations specify SLAB_ALLOC_NO_RECURSE that prevents
allocation of both sheaves and obj_exts arrays, the recursion depth
is bounded.
obj_exts arrays for non-
---truncated---
🎖@cveNotify
🚨 CVE-2026-74577
In the Linux kernel, the following vulnerability has been resolved:
net: mpls: initialize rtm_tos in mpls_getroute()
mpls_getroute() builds the RTM_NEWROUTE reply to an RTM_GETROUTE
request by filling a struct rtmsg allocated from an skb whose data
area is not zeroed (alloc_skb(NLMSG_GOODSIZE, ...)). It sets every
field of the header except rtm_tos:
r = nlmsg_data(nlh);
r->rtm_family = AF_MPLS;
r->rtm_dst_len = 20;
r->rtm_src_len = 0;
r->rtm_table = RT_TABLE_MAIN;
r->rtm_type = RTN_UNICAST;
r->rtm_scope = RT_SCOPE_UNIVERSE;
r->rtm_protocol = rt->rt_protocol;
r->rtm_flags = 0;
struct rtmsg has no padding, so the one uninitialised byte rtm_tos
(offset 3) is copied straight to user space on recvmsg(), leaking a
byte of uninitialised heap memory. This is in contrast to
mpls_dump_route(), which fills the very same header and does set
rtm_tos = 0.
Initialize rtm_tos to 0, matching mpls_dump_route().
Reproduced with KMSAN by adding an MPLS route and issuing a
non-RTM_F_FIB_MATCH RTM_GETROUTE for its label:
BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x36c/0x33f0
_copy_to_iter+0x36c/0x33f0
__skb_datagram_iter+0x196/0x12c0
skb_copy_datagram_iter+0x5b/0x210
netlink_recvmsg+0x37b/0xef0
...
Uninit was created at:
__alloc_skb+0x8ca/0x10e0
mpls_getroute+0x1280/0x3a40
rtnetlink_rcv_msg+0x1138/0x15a0
...
Byte 19 of 64 is uninitialized
(byte 19 = nlmsghdr(16) + rtmsg offset 3 = rtm_tos)
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
net: mpls: initialize rtm_tos in mpls_getroute()
mpls_getroute() builds the RTM_NEWROUTE reply to an RTM_GETROUTE
request by filling a struct rtmsg allocated from an skb whose data
area is not zeroed (alloc_skb(NLMSG_GOODSIZE, ...)). It sets every
field of the header except rtm_tos:
r = nlmsg_data(nlh);
r->rtm_family = AF_MPLS;
r->rtm_dst_len = 20;
r->rtm_src_len = 0;
r->rtm_table = RT_TABLE_MAIN;
r->rtm_type = RTN_UNICAST;
r->rtm_scope = RT_SCOPE_UNIVERSE;
r->rtm_protocol = rt->rt_protocol;
r->rtm_flags = 0;
struct rtmsg has no padding, so the one uninitialised byte rtm_tos
(offset 3) is copied straight to user space on recvmsg(), leaking a
byte of uninitialised heap memory. This is in contrast to
mpls_dump_route(), which fills the very same header and does set
rtm_tos = 0.
Initialize rtm_tos to 0, matching mpls_dump_route().
Reproduced with KMSAN by adding an MPLS route and issuing a
non-RTM_F_FIB_MATCH RTM_GETROUTE for its label:
BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x36c/0x33f0
_copy_to_iter+0x36c/0x33f0
__skb_datagram_iter+0x196/0x12c0
skb_copy_datagram_iter+0x5b/0x210
netlink_recvmsg+0x37b/0xef0
...
Uninit was created at:
__alloc_skb+0x8ca/0x10e0
mpls_getroute+0x1280/0x3a40
rtnetlink_rcv_msg+0x1138/0x15a0
...
Byte 19 of 64 is uninitialized
(byte 19 = nlmsghdr(16) + rtmsg offset 3 = rtm_tos)
🎖@cveNotify
🚨 CVE-2026-74578
In the Linux kernel, the following vulnerability has been resolved:
crypto: algif_skcipher - force synchronous processing on trees without ctx->state
The AIO/async path in skcipher_recvmsg() passes the socket-wide ctx->iv
directly into the skcipher request. After io_submit() the socket lock is
dropped and the request is processed asynchronously, so a concurrent
sendmsg(ALG_SET_IV) can overwrite ctx->iv and make the in-flight request
run under an attacker-controlled IV. For CTR/stream modes this is
IV/keystream reuse and lets an unprivileged user recover the plaintext of
a concurrent operation.
Snapshotting ctx->iv into per-request storage for the async path is not
sufficient. For ciphers with statesize == 0 - which includes cbc and ctr -
the MSG_MORE inter-chunk IV chaining is carried solely by the in-place
req->iv writeback, which a snapshot redirects into per-request memory that
af_alg_free_resources() releases on completion, silently producing wrong
output. Writing the IV back from the completion callback instead is not
possible either: that would require lock_sock() there, but the callback can
run in softirq/atomic context, so it must not sleep.
Make the operation synchronous instead, which removes both the IV race and
any writeback race. This is equivalent to the upstream resolution, commit
fcc77d33a34c ("net: Remove support for AIO on sockets"), which removed the
AIO socket path across net/ entirely and so produces the same end state for
this file. This patch deviates from that commit deliberately: rather than
removing AIO socket support tree-wide, which would be far too invasive for
stable, it removes only the AIO branch in crypto/algif_skcipher.c.
io_submit() now completes synchronously; AF_ALG async is rarely used in
practice.
The -EIOCBQUEUED check in skcipher_recvmsg() is now dead but harmless,
and is left alone to keep the fix minimal.
Tested on 6.6.y: attacker IV injection dropped from 2296/200000 to 0/200000
after the change; MSG_MORE chunked CTR output bit-identical to single-shot.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
crypto: algif_skcipher - force synchronous processing on trees without ctx->state
The AIO/async path in skcipher_recvmsg() passes the socket-wide ctx->iv
directly into the skcipher request. After io_submit() the socket lock is
dropped and the request is processed asynchronously, so a concurrent
sendmsg(ALG_SET_IV) can overwrite ctx->iv and make the in-flight request
run under an attacker-controlled IV. For CTR/stream modes this is
IV/keystream reuse and lets an unprivileged user recover the plaintext of
a concurrent operation.
Snapshotting ctx->iv into per-request storage for the async path is not
sufficient. For ciphers with statesize == 0 - which includes cbc and ctr -
the MSG_MORE inter-chunk IV chaining is carried solely by the in-place
req->iv writeback, which a snapshot redirects into per-request memory that
af_alg_free_resources() releases on completion, silently producing wrong
output. Writing the IV back from the completion callback instead is not
possible either: that would require lock_sock() there, but the callback can
run in softirq/atomic context, so it must not sleep.
Make the operation synchronous instead, which removes both the IV race and
any writeback race. This is equivalent to the upstream resolution, commit
fcc77d33a34c ("net: Remove support for AIO on sockets"), which removed the
AIO socket path across net/ entirely and so produces the same end state for
this file. This patch deviates from that commit deliberately: rather than
removing AIO socket support tree-wide, which would be far too invasive for
stable, it removes only the AIO branch in crypto/algif_skcipher.c.
io_submit() now completes synchronously; AF_ALG async is rarely used in
practice.
The -EIOCBQUEUED check in skcipher_recvmsg() is now dead but harmless,
and is left alone to keep the fix minimal.
Tested on 6.6.y: attacker IV injection dropped from 2296/200000 to 0/200000
after the change; MSG_MORE chunked CTR output bit-identical to single-shot.
🎖@cveNotify
🚨 CVE-2026-13700
The WooMS WordPress plugin through 9.14 does not validate a user-supplied URL before using it in a server-side request and attaches stored third-party integration credentials to every such request, allowing unauthenticated attackers to perform Server-Side Request Forgery and to disclose the configured integration credentials when the relevant data-sync feature is enabled.
🎖@cveNotify
The WooMS WordPress plugin through 9.14 does not validate a user-supplied URL before using it in a server-side request and attaches stored third-party integration credentials to every such request, allowing unauthenticated attackers to perform Server-Side Request Forgery and to disclose the configured integration credentials when the relevant data-sync feature is enabled.
🎖@cveNotify
WPScan
WooMS <= 9.14 - Unauthenticated Server-Side Request Forgery and Sensitive Information Disclosure
See details on WooMS <= 9.14 - Unauthenticated Server-Side Request Forgery and Sensitive Information Disclosure CVE 2026-13700. View the latest Plugin Vulnerabilities on WPScan.
🚨 CVE-2026-14832
The ShopSmart Loyalty for WooCommerce WordPress plugin through 1.0.0 does not perform any authorization or ownership check on a phone-number lookup exposed to unauthenticated users, allowing anyone who knows a customer's phone number to retrieve that customer's loyalty profile, including name, email, and account balance.
🎖@cveNotify
The ShopSmart Loyalty for WooCommerce WordPress plugin through 1.0.0 does not perform any authorization or ownership check on a phone-number lookup exposed to unauthenticated users, allowing anyone who knows a customer's phone number to retrieve that customer's loyalty profile, including name, email, and account balance.
🎖@cveNotify
WPScan
ShopSmart Loyalty for WooCommerce <= 1.0.0 - Unauthenticated Sensitive Information Disclosure via shopsmart_check_phone
See details on ShopSmart Loyalty for WooCommerce <= 1.0.0 - Unauthenticated Sensitive Information Disclosure via shopsmart_check_phone CVE 2026-14832. View the latest Plugin Vulnerabilities on WPScan.
🚨 CVE-2026-19987
A security vulnerability has been detected in SourceCodester Best Employee Management System 1.0. This affects an unknown function of the file /assets/uploadImage/Profile/. Such manipulation leads to exposure of information through directory listing. It is possible to launch the attack remotely.
🎖@cveNotify
A security vulnerability has been detected in SourceCodester Best Employee Management System 1.0. This affects an unknown function of the file /assets/uploadImage/Profile/. Such manipulation leads to exposure of information through directory listing. It is possible to launch the attack remotely.
🎖@cveNotify
Vulnerability Database
CVE-2026-19987 in Best Employee Management System
A security vulnerability has been detected in SourceCodester Best Employee Management System 1.0. This vulnerability is referenced as CVE-2026-19987.
🚨 CVE-2026-19988
A vulnerability was detected in Alaev SEO Tools Extension up to 1.0.10 on Chrome. This impacts the function addDiv of the file src/popup.html of the component Popup UI. Performing a manipulation results in basic cross site scripting. The attack can be initiated remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
🎖@cveNotify
A vulnerability was detected in Alaev SEO Tools Extension up to 1.0.10 on Chrome. This impacts the function addDiv of the file src/popup.html of the component Popup UI. Performing a manipulation results in basic cross site scripting. The attack can be initiated remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
🎖@cveNotify
GitHub
chrome_extensions/Alaev & Co Alaev SEO Tools 1.0.10 allows extension popup UI injection through unsanitized page SEO fields at…
Contribute to xryj920/chrome_extensions development by creating an account on GitHub.
🚨 CVE-2026-19992
A flaw has been found in Orange View Limited DualSafe Password Manager & Digital Vault Extension up to 1.4.35 on Chrome. Affected is an unknown function of the component postMessage-based Bridge. Executing a manipulation can lead to information disclosure. The attack can be launched remotely. A high complexity level is associated with this attack. The exploitability is told to be difficult. The exploit has been published and may be used. The vendor was contacted early about this disclosure.
🎖@cveNotify
A flaw has been found in Orange View Limited DualSafe Password Manager & Digital Vault Extension up to 1.4.35 on Chrome. Affected is an unknown function of the component postMessage-based Bridge. Executing a manipulation can lead to information disclosure. The attack can be launched remotely. A high complexity level is associated with this attack. The exploitability is told to be difficult. The exploit has been published and may be used. The vendor was contacted early about this disclosure.
🎖@cveNotify
GitHub
chrome_extensions/Orange View Limited DualSafe Password Manager & Digital Vault 1.4.35 exposes stored credentials and TOTP codes…
Contribute to xryj920/chrome_extensions development by creating an account on GitHub.
🚨 CVE-2026-19993
A vulnerability has been found in Webkul Bagisto up to 2.4.4. Affected by this vulnerability is an unknown functionality of the file /customer/account/rma/update-status of the component RMA State Validation. The manipulation leads to enforcement of behavioral workflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor confirms: "The reported issues were already identified through our internal security assessment process prior to this notification and are being handled through our established internal security and development lifecycle. Some of these items have already been addressed, while the remaining items are planned for resolution in upcoming product releases."
🎖@cveNotify
A vulnerability has been found in Webkul Bagisto up to 2.4.4. Affected by this vulnerability is an unknown functionality of the file /customer/account/rma/update-status of the component RMA State Validation. The manipulation leads to enforcement of behavioral workflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor confirms: "The reported issues were already identified through our internal security assessment process prior to this notification and are being handled through our established internal security and development lifecycle. Some of these items have already been addressed, while the remaining items are planned for resolution in upcoming product releases."
🎖@cveNotify
GitHub
PHP_Web_POCs/Bagisto/37_38_english_vulnerability_report.md at main · Mitchell45/PHP_Web_POCs
Contribute to Mitchell45/PHP_Web_POCs development by creating an account on GitHub.
🚨 CVE-2026-74579
In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_payload: fix mask build for partial field offload
nft_payload_offload_mask() builds the offload match mask for a payload
expression that covers only part of a header field. For a partial IPv6
address match (field_len = 16, priv_len = 1) that shift is 1 << 120, which
is undefined on the 32-bit int operand. It also trims only one word, so
the remaining words stay 0xffffffff (and when priv_len is a multiple of 4
the trim is skipped entirely), leaving the mask covering more bytes than
the rule matches.
UBSAN: shift-out-of-bounds in net/netfilter/nft_payload.c:278:20
shift exponent 120 is too large for 32-bit type 'int'
...
The match is byte-granular and struct nft_data is zero-initialised, so the
correct mask is simply the first priv_len bytes set to 0xff. Set those
bytes directly and drop the word/shift trimming; this removes the undefined
shift and no longer over-masks the trailing bytes.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_payload: fix mask build for partial field offload
nft_payload_offload_mask() builds the offload match mask for a payload
expression that covers only part of a header field. For a partial IPv6
address match (field_len = 16, priv_len = 1) that shift is 1 << 120, which
is undefined on the 32-bit int operand. It also trims only one word, so
the remaining words stay 0xffffffff (and when priv_len is a multiple of 4
the trim is skipped entirely), leaving the mask covering more bytes than
the rule matches.
UBSAN: shift-out-of-bounds in net/netfilter/nft_payload.c:278:20
shift exponent 120 is too large for 32-bit type 'int'
...
The match is byte-granular and struct nft_data is zero-initialised, so the
correct mask is simply the first priv_len bytes set to 0xff. Set those
bytes directly and drop the word/shift trimming; this removes the undefined
shift and no longer over-masks the trailing bytes.
🎖@cveNotify
🚨 CVE-2026-4740
A flaw was found in Open Cluster Management (OCM), the technology underlying Red Hat Advanced Cluster Management (ACM). Improper validation of Kubernetes client certificate renewal allows a managed cluster administrator to forge a client certificate that can be approved by the OCM controller. This enables cross-cluster privilege escalation and may allow an attacker to gain control over other managed clusters, including the hub cluster.
🎖@cveNotify
A flaw was found in Open Cluster Management (OCM), the technology underlying Red Hat Advanced Cluster Management (ACM). Improper validation of Kubernetes client certificate renewal allows a managed cluster administrator to forge a client certificate that can be approved by the OCM controller. This enables cross-cluster privilege escalation and may allow an attacker to gain control over other managed clusters, including the hub cluster.
🎖@cveNotify
🚨 CVE-2026-16242
A flaw was found in the Konnectivity proxy-server configuration for hosted control planes. The agent-facing listener was started without --cluster-ca-cert (and without token-based agent authentication), so client certificates were not validated. A remote attacker who can reach the Konnectivity cluster endpoint could connect as an unauthenticated agent, join the routing pool, and potentially proxy, inspect, modify, or drop control-plane-to-node traffic.
🎖@cveNotify
A flaw was found in the Konnectivity proxy-server configuration for hosted control planes. The agent-facing listener was started without --cluster-ca-cert (and without token-based agent authentication), so client certificates were not validated. A remote attacker who can reach the Konnectivity cluster endpoint could connect as an unauthenticated agent, join the routing pool, and potentially proxy, inspect, modify, or drop control-plane-to-node traffic.
🎖@cveNotify
🚨 CVE-2026-17107
A flaw was found in the cluster-proxy service-proxy component used in Red Hat Advanced Cluster Management for Kubernetes (RHACM) and multicluster-engine (MCE). The service-proxy appends impersonation group headers to proxied requests without first removing caller-supplied values, and the spoke ServiceAccount holds unrestricted impersonation permissions. An authenticated hub principal can inject an Impersonate-Group header to escalate to cluster-admin on every managed cluster.
🎖@cveNotify
A flaw was found in the cluster-proxy service-proxy component used in Red Hat Advanced Cluster Management for Kubernetes (RHACM) and multicluster-engine (MCE). The service-proxy appends impersonation group headers to proxied requests without first removing caller-supplied values, and the spoke ServiceAccount holds unrestricted impersonation permissions. An authenticated hub principal can inject an Impersonate-Group header to escalate to cluster-admin on every managed cluster.
🎖@cveNotify
🚨 CVE-2026-15623
A SQL Injection vulnerability in a legacy dashboard widget API in Google Cloud Google SecOps (Chronicle SOAR) versions prior to 6.3.85 on Google Cloud Platform allows an authenticated attacker to execute blind SQL queries using a crafted request parameter.
This vulnerability was patched in version 6.3.85, and no customer action is needed.
🎖@cveNotify
A SQL Injection vulnerability in a legacy dashboard widget API in Google Cloud Google SecOps (Chronicle SOAR) versions prior to 6.3.85 on Google Cloud Platform allows an authenticated attacker to execute blind SQL queries using a crafted request parameter.
This vulnerability was patched in version 6.3.85, and no customer action is needed.
🎖@cveNotify
Google Cloud Documentation
Google Security Operations SOAR release notes | Google Cloud Documentation
🚨 CVE-2026-19994
A vulnerability was found in Webkul Bagisto up to 2.4.4. Affected by this issue is some unknown functionality of the file /admin/configuration/cache-management/execute of the component Configuration Management. The manipulation of the argument action results in authorization bypass. The attack may be launched remotely. The exploit has been made public and could be used. The vendor confirms: "The reported issues were already identified through our internal security assessment process prior to this notification and are being handled through our established internal security and development lifecycle. Some of these items have already been addressed, while the remaining items are planned for resolution in upcoming product releases."
🎖@cveNotify
A vulnerability was found in Webkul Bagisto up to 2.4.4. Affected by this issue is some unknown functionality of the file /admin/configuration/cache-management/execute of the component Configuration Management. The manipulation of the argument action results in authorization bypass. The attack may be launched remotely. The exploit has been made public and could be used. The vendor confirms: "The reported issues were already identified through our internal security assessment process prior to this notification and are being handled through our established internal security and development lifecycle. Some of these items have already been addressed, while the remaining items are planned for resolution in upcoming product releases."
🎖@cveNotify
GitHub
PHP_Web_POCs/Bagisto/31_33_english_vulnerability_report.md at main · Mitchell45/PHP_Web_POCs
Contribute to Mitchell45/PHP_Web_POCs development by creating an account on GitHub.
🚨 CVE-2026-19995
A vulnerability was determined in Webkul Bagisto up to 2.4.4. This affects an unknown part of the file /customer/account/rma/send-message of the component RMA Message Handler. This manipulation of the argument Message causes cross site scripting. Remote exploitation of the attack is possible. The exploit has been publicly disclosed and may be utilized. The vendor confirms: "The reported issues were already identified through our internal security assessment process prior to this notification and are being handled through our established internal security and development lifecycle. Some of these items have already been addressed, while the remaining items are planned for resolution in upcoming product releases."
🎖@cveNotify
A vulnerability was determined in Webkul Bagisto up to 2.4.4. This affects an unknown part of the file /customer/account/rma/send-message of the component RMA Message Handler. This manipulation of the argument Message causes cross site scripting. Remote exploitation of the attack is possible. The exploit has been publicly disclosed and may be utilized. The vendor confirms: "The reported issues were already identified through our internal security assessment process prior to this notification and are being handled through our established internal security and development lifecycle. Some of these items have already been addressed, while the remaining items are planned for resolution in upcoming product releases."
🎖@cveNotify
GitHub
PHP_Web_POCs/Bagisto/39_english_vulnerability_report.md at main · Mitchell45/PHP_Web_POCs
Contribute to Mitchell45/PHP_Web_POCs development by creating an account on GitHub.