🚨 CVE-2026-68443
In the Linux kernel, the following vulnerability has been resolved:
hwmon: (gigabyte_waterforce) Stop device IO before calling hid_hw_stop
Calling hid_hw_stop() does not stop the device IO.
This results in a race condition between hid_input_report() and the point
immediately following the execution of hid_device_io_start() within
the driver probe function. If the probe operation fails after "io start"
has been initiated, this race condition will result in a UAF vulnerability.
Fix the problem by calling hid_device_io_stop() before calling
hid_hw_stop().
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
hwmon: (gigabyte_waterforce) Stop device IO before calling hid_hw_stop
Calling hid_hw_stop() does not stop the device IO.
This results in a race condition between hid_input_report() and the point
immediately following the execution of hid_device_io_start() within
the driver probe function. If the probe operation fails after "io start"
has been initiated, this race condition will result in a UAF vulnerability.
Fix the problem by calling hid_device_io_stop() before calling
hid_hw_stop().
🎖@cveNotify
🚨 CVE-2026-68444
In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_ffa: Fix NULL dereference in ffa_partition_info_get()
ffa_partition_info_get() passes uuid_str directly to uuid_parse()
without a NULL check. When a caller passes NULL, uuid_parse() ->
__uuid_parse() -> uuid_is_valid() dereferences the pointer, causing
a kernel panic:
| Unable to handle kernel NULL pointer dereference at virtual address
| 0000000000000040
| pc : uuid_parse+0x40/0xac
| lr : ffa_partition_info_get+0x1c/0x94 [arm_ffa]
Add a NULL guard before uuid_parse() so a NULL argument returns
-ENODEV instead of crashing. Callers are expected to always supply
a valid partition UUID, so NULL is not a supported input.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_ffa: Fix NULL dereference in ffa_partition_info_get()
ffa_partition_info_get() passes uuid_str directly to uuid_parse()
without a NULL check. When a caller passes NULL, uuid_parse() ->
__uuid_parse() -> uuid_is_valid() dereferences the pointer, causing
a kernel panic:
| Unable to handle kernel NULL pointer dereference at virtual address
| 0000000000000040
| pc : uuid_parse+0x40/0xac
| lr : ffa_partition_info_get+0x1c/0x94 [arm_ffa]
Add a NULL guard before uuid_parse() so a NULL argument returns
-ENODEV instead of crashing. Callers are expected to always supply
a valid partition UUID, so NULL is not a supported input.
🎖@cveNotify
🚨 CVE-2026-68445
In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: Prevent shader BO mappings from becoming writable
vc4_gem_object_mmap() rejects a writable mapping of a validated shader
BO, but leaves VM_MAYWRITE set. Userspace can map the BO read-only and
then turn it writable with mprotect().
Validated shader BOs must stay read-only: the validator checks the
instructions once and the GPU trusts them afterwards. A writable
mapping lets userspace rewrite the code after validation, bypassing the
validator.
Clear VM_MAYWRITE on the read-only path so the mapping cannot be
upgraded, as i915 already does for its read-only objects.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: Prevent shader BO mappings from becoming writable
vc4_gem_object_mmap() rejects a writable mapping of a validated shader
BO, but leaves VM_MAYWRITE set. Userspace can map the BO read-only and
then turn it writable with mprotect().
Validated shader BOs must stay read-only: the validator checks the
instructions once and the GPU trusts them afterwards. A writable
mapping lets userspace rewrite the code after validation, bypassing the
validator.
Clear VM_MAYWRITE on the read-only path so the mapping cannot be
upgraded, as i915 already does for its read-only objects.
🎖@cveNotify
🚨 CVE-2026-68446
In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: Validate vmw_surface_metadata::array_size
This field comes from userspace and should be validated against specific
limits depending on which Shader Model (SM) is available.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: Validate vmw_surface_metadata::array_size
This field comes from userspace and should be validated against specific
limits depending on which Shader Model (SM) is available.
🎖@cveNotify
🚨 CVE-2026-68447
In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: clamp v9 CRIU control stack checkpoint copy to BO size
CRIU checkpoint copies the MQD control stack using cp_hqd_cntl_stack_size
from hardware without bounding it to the allocated BO region. If the HW
field is larger than the queue's control stack allocation, memcpy reads
past the BO into adjacent GTT memory and can leak kernel data to userspace.
Store the page-aligned control stack BO size in mqd_manager and clamp
checkpoint copies and reported checkpoint sizes to
min(cp_hqd_cntl_stack_size, mm->ctl_stack_size). Apply the same bound
for multi-XCC v9.4.3 checkpoint layout.
(cherry picked from commit 6c2abd0ec09e86c6323010673766f76050e28aa3)
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: clamp v9 CRIU control stack checkpoint copy to BO size
CRIU checkpoint copies the MQD control stack using cp_hqd_cntl_stack_size
from hardware without bounding it to the allocated BO region. If the HW
field is larger than the queue's control stack allocation, memcpy reads
past the BO into adjacent GTT memory and can leak kernel data to userspace.
Store the page-aligned control stack BO size in mqd_manager and clamp
checkpoint copies and reported checkpoint sizes to
min(cp_hqd_cntl_stack_size, mm->ctl_stack_size). Apply the same bound
for multi-XCC v9.4.3 checkpoint layout.
(cherry picked from commit 6c2abd0ec09e86c6323010673766f76050e28aa3)
🎖@cveNotify
🚨 CVE-2026-68448
In the Linux kernel, the following vulnerability has been resolved:
ovl: check access to copy_file_range source with src mounter creds
Commit 5dae222a5ff0c ("vfs: allow copy_file_range to copy across devices")
allowed filesystems that implement the copy_file_range() f_op to decide
if they want to access cross-sb copy from/to the same fs type.
The same commit added checks to verify same sb copy for filesystems that
implement ->copy_file_range() and do not support cross-sb copy at the
time, namely, to ceph, fuse and nfs.
The two remaining fs which implement ->copy_file_range(), cifs and
overlayfs started to support cross-sb copy from this time.
While overlayfs does support cross-sb copy when the two underlying files
are on the same base fs, the copy operation on the two real files from
two different overalyfs filesystems is performed with the mounter
creds of the destination overlayfs and the read permission access hook
for the source file was called with the wrong creds.
This could cause either deny of access to copy which would otherwise be
allowed (e.g. with splice) or allow read access to file which would
otherwise be denied.
Fix the latter case by explicitly verifying read access to source file
with the source overlayfs mounter creds.
The former case remains a quirk of cross-sb overlayfs copy, but
userspace could fall back to regular copy so no harm done.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
ovl: check access to copy_file_range source with src mounter creds
Commit 5dae222a5ff0c ("vfs: allow copy_file_range to copy across devices")
allowed filesystems that implement the copy_file_range() f_op to decide
if they want to access cross-sb copy from/to the same fs type.
The same commit added checks to verify same sb copy for filesystems that
implement ->copy_file_range() and do not support cross-sb copy at the
time, namely, to ceph, fuse and nfs.
The two remaining fs which implement ->copy_file_range(), cifs and
overlayfs started to support cross-sb copy from this time.
While overlayfs does support cross-sb copy when the two underlying files
are on the same base fs, the copy operation on the two real files from
two different overalyfs filesystems is performed with the mounter
creds of the destination overlayfs and the read permission access hook
for the source file was called with the wrong creds.
This could cause either deny of access to copy which would otherwise be
allowed (e.g. with splice) or allow read access to file which would
otherwise be denied.
Fix the latter case by explicitly verifying read access to source file
with the source overlayfs mounter creds.
The former case remains a quirk of cross-sb overlayfs copy, but
userspace could fall back to regular copy so no harm done.
🎖@cveNotify
🚨 CVE-2026-68449
In the Linux kernel, the following vulnerability has been resolved:
ata: sata_dwc_460ex: fix infinite loop in NCQ tag completion bit-scanning
The hand-rolled bit-scanning loop in the NCQ completion path has an
infinite loop bug. When tag_mask has only high bits set (e.g.
0x80000000), the inner while loop left-shifts tag_mask until it
overflows to 0. At that point !(0 & 1) is always true and 0 <<= 1
stays 0, causing an infinite loop in hardirq context with a spinlock
held.
Replace the open-coded bit-scanning with __ffs() which correctly
finds the least significant set bit and is bounded by the width of
the argument.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
ata: sata_dwc_460ex: fix infinite loop in NCQ tag completion bit-scanning
The hand-rolled bit-scanning loop in the NCQ completion path has an
infinite loop bug. When tag_mask has only high bits set (e.g.
0x80000000), the inner while loop left-shifts tag_mask until it
overflows to 0. At that point !(0 & 1) is always true and 0 <<= 1
stays 0, causing an infinite loop in hardirq context with a spinlock
held.
Replace the open-coded bit-scanning with __ffs() which correctly
finds the least significant set bit and is bounded by the width of
the argument.
🎖@cveNotify
🚨 CVE-2026-68451
In the Linux kernel, the following vulnerability has been resolved:
s390/zcrypt: Validate length for CCA ECC private key requests
cca_ecc2protkey() derives the copy length for the CPRB parameter
block directly from the length field in the key token. Reject the
request early if the token length exceeds the available space in the
parameter block.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
s390/zcrypt: Validate length for CCA ECC private key requests
cca_ecc2protkey() derives the copy length for the CPRB parameter
block directly from the length field in the key token. Reject the
request early if the token length exceeds the available space in the
parameter block.
🎖@cveNotify
🚨 CVE-2026-68452
In the Linux kernel, the following vulnerability has been resolved:
s390/zcrypt: Validate length for CCA AES cipher key requests
cca_cipher2protkey() derives the copy length for the CPRB parameter
block directly from the length field in the key token. Reject the
request early if the token length exceeds the available space in the
parameter block.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
s390/zcrypt: Validate length for CCA AES cipher key requests
cca_cipher2protkey() derives the copy length for the CPRB parameter
block directly from the length field in the key token. Reject the
request early if the token length exceeds the available space in the
parameter block.
🎖@cveNotify
🚨 CVE-2026-68453
In the Linux kernel, the following vulnerability has been resolved:
s390/zcrypt: Fix buffer over-read in cca_cipher2protkey
Add validation of both the actual key buffer size and token length
fields in all the cca_check_sec*token() functions. Additionally check
in cca_gencipherkey() for possible underflow with returned key size.
The CCA token structures contain user-controlled len fields that
were used in operations without proper validation against both the
actual buffer size and minimum token structure size. An attacker
could set this field larger than the actual buffer size, leading to
reading beyond buffer boundaries. This may result in a kernel crash or
exposure of memory via sending this as part of a request down to the
crypto card. Also an attacker could have used a very small len value
and thus enforce a buffer under-run which may produce similar effects
as a over-read.
So now a key must
- key buf length must be at least sizeof the token struct
- the key len field inside the token must fit into the range of
sizeof key token struct ... key buf length
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
s390/zcrypt: Fix buffer over-read in cca_cipher2protkey
Add validation of both the actual key buffer size and token length
fields in all the cca_check_sec*token() functions. Additionally check
in cca_gencipherkey() for possible underflow with returned key size.
The CCA token structures contain user-controlled len fields that
were used in operations without proper validation against both the
actual buffer size and minimum token structure size. An attacker
could set this field larger than the actual buffer size, leading to
reading beyond buffer boundaries. This may result in a kernel crash or
exposure of memory via sending this as part of a request down to the
crypto card. Also an attacker could have used a very small len value
and thus enforce a buffer under-run which may produce similar effects
as a over-read.
So now a key must
- key buf length must be at least sizeof the token struct
- the key len field inside the token must fit into the range of
sizeof key token struct ... key buf length
🎖@cveNotify
🚨 CVE-2026-68454
In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: pci: Fix handling of AIF enable without AISB
When a guest seeks to register IRQs without a summary bit specified,
ensure that the associated GAITE then stores 0 for the guest AISB
location instead of virt_to_phys(page_address(NULL)).
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: pci: Fix handling of AIF enable without AISB
When a guest seeks to register IRQs without a summary bit specified,
ensure that the associated GAITE then stores 0 for the guest AISB
location instead of virt_to_phys(page_address(NULL)).
🎖@cveNotify
🚨 CVE-2026-68455
In the Linux kernel, the following vulnerability has been resolved:
liveupdate: validate session type before performing operation
The sessions ioctls are not applicable to all session types. PRESERVE_FD
is only applicable to outgoing sessions. RETRIEVE_FD and FINISH are only
valid for incoming session. Calling a incoming ioctl on an outgoing
session is invalid and can cause file handlers to run into unexpected
errors.
For example, a user can create a (outgoing) session, preserve a memfd,
and then immediately do a retrieve without doing a kexec in between.
This would result in memfd's retrieve handler to run. The handlers
expects to be called from a post-kexec context, and will try to do a
kho_restore_vmalloc() or kho_restore_folio() to try and restore memory.
KHO catches this (thanks to KHO_PAGE_MAGIC) and returns an error, but
since this is considered an internal error and KHO throws out a bunch of
WARN()s.
Associate a type with each ioctl op and validate the type in
luo_session_ioctl() before dispatching the ioctl handler to make sure
the op is being called for the right session type.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
liveupdate: validate session type before performing operation
The sessions ioctls are not applicable to all session types. PRESERVE_FD
is only applicable to outgoing sessions. RETRIEVE_FD and FINISH are only
valid for incoming session. Calling a incoming ioctl on an outgoing
session is invalid and can cause file handlers to run into unexpected
errors.
For example, a user can create a (outgoing) session, preserve a memfd,
and then immediately do a retrieve without doing a kexec in between.
This would result in memfd's retrieve handler to run. The handlers
expects to be called from a post-kexec context, and will try to do a
kho_restore_vmalloc() or kho_restore_folio() to try and restore memory.
KHO catches this (thanks to KHO_PAGE_MAGIC) and returns an error, but
since this is considered an internal error and KHO throws out a bunch of
WARN()s.
Associate a type with each ioctl op and validate the type in
luo_session_ioctl() before dispatching the ioctl handler to make sure
the op is being called for the right session type.
🎖@cveNotify
🚨 CVE-2026-68456
In the Linux kernel, the following vulnerability has been resolved:
usb: atm: ueagle-atm: wait for pre-firmware load in .disconnect()
ueagle-atm uses the asynchronous request_firmware_nowait() in .probe(),
but does not wait for its completion, not even in .disconnect(); so, if the
device is unplugged meanwhile, its teardown runs concurrently with that.
Even though this inconsistency is worth addressing on its own, it has also
triggered several bug reports in syzbot over the years (some auto-closed)
where the firmware sysfs fallback mechanism (CONFIG_FW_LOADER_USER_HELPER)
creates a firmware subdirectory in the device directory during its removal,
which might hit unexpected conditions in kernfs, apparently, depending at
which point the add and remove operations raced. (See links.)
The pattern is:
usb ?-?: Direct firmware load for ueagle-atm/eagle?.fw failed with error -2
usb ?-?: Falling back to sysfs fallback for: ueagle-atm/eagle?.fw
<ERROR>
Call trace:
...
kernfs_create_dir_ns
sysfs_create_dir_ns
create_dir
kobject_add_internal
kobject_add_varg
kobject_add
class_dir_create_and_add
get_device_parent
device_add
fw_load_sysfs_fallback
fw_load_from_user_helper
firmware_fallback_sysfs
_request_firmware
request_firmware_work_func
...
(Some variations are observed, after fw_load_sysfs_fallback(), e.g., [1].)
While the kernfs side is being looked at, the ueagle-atm side can be fixed
by waiting for the pre-firmware load in the .disconnect() handler.
This change has a similar approach to previous work by Andrey Tsygunka [2]
(wait_for_completion() in .disconnect()), but it is relatively different in
design/implementation; using the Originally-by tag for credit assignment.
This has been tested with:
- synthetic reproducer to check the error path;
- USB gadget (virtual device) to check the firmware upload path;
- QEMU device emulator to check the device ID re-enumeration path;
(The latter two were written by Claude; no other code/text in this commit.)
Links (year first reported):
2025 https://syzbot.org/bug?extid=ce1e5a1b4e086b43e56d
2025 https://syzbot.org/bug?extid=9af8471255ac36e34fd4
2024 https://syzbot.org/bug?extid=306212936b13e520679d
2023 https://syzkaller.appspot.com/bug?extid=457452d30bcdda75ead2
2022 https://syzbot.org/bug?extid=782984d6f1701b526edb
2021 https://syzbot.org/bug?id=f3f221579f4ef7e9691281f3c6f56c05f83e8490
2021 https://syzbot.org/bug?id=84d86f0d71394829df6fc53daf6642c045983881
2021 https://syzbot.org/bug?id=3302dc1c0e2b9c94f2e8edb404eabc9267bc6f90
[1] https://syzkaller.appspot.com/bug?extid=457452d30bcdda75ead2
[2] https://lore.kernel.org/lkml/20250410093146.3776801-2-aitsygunka@yandex.ru/
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
usb: atm: ueagle-atm: wait for pre-firmware load in .disconnect()
ueagle-atm uses the asynchronous request_firmware_nowait() in .probe(),
but does not wait for its completion, not even in .disconnect(); so, if the
device is unplugged meanwhile, its teardown runs concurrently with that.
Even though this inconsistency is worth addressing on its own, it has also
triggered several bug reports in syzbot over the years (some auto-closed)
where the firmware sysfs fallback mechanism (CONFIG_FW_LOADER_USER_HELPER)
creates a firmware subdirectory in the device directory during its removal,
which might hit unexpected conditions in kernfs, apparently, depending at
which point the add and remove operations raced. (See links.)
The pattern is:
usb ?-?: Direct firmware load for ueagle-atm/eagle?.fw failed with error -2
usb ?-?: Falling back to sysfs fallback for: ueagle-atm/eagle?.fw
<ERROR>
Call trace:
...
kernfs_create_dir_ns
sysfs_create_dir_ns
create_dir
kobject_add_internal
kobject_add_varg
kobject_add
class_dir_create_and_add
get_device_parent
device_add
fw_load_sysfs_fallback
fw_load_from_user_helper
firmware_fallback_sysfs
_request_firmware
request_firmware_work_func
...
(Some variations are observed, after fw_load_sysfs_fallback(), e.g., [1].)
While the kernfs side is being looked at, the ueagle-atm side can be fixed
by waiting for the pre-firmware load in the .disconnect() handler.
This change has a similar approach to previous work by Andrey Tsygunka [2]
(wait_for_completion() in .disconnect()), but it is relatively different in
design/implementation; using the Originally-by tag for credit assignment.
This has been tested with:
- synthetic reproducer to check the error path;
- USB gadget (virtual device) to check the firmware upload path;
- QEMU device emulator to check the device ID re-enumeration path;
(The latter two were written by Claude; no other code/text in this commit.)
Links (year first reported):
2025 https://syzbot.org/bug?extid=ce1e5a1b4e086b43e56d
2025 https://syzbot.org/bug?extid=9af8471255ac36e34fd4
2024 https://syzbot.org/bug?extid=306212936b13e520679d
2023 https://syzkaller.appspot.com/bug?extid=457452d30bcdda75ead2
2022 https://syzbot.org/bug?extid=782984d6f1701b526edb
2021 https://syzbot.org/bug?id=f3f221579f4ef7e9691281f3c6f56c05f83e8490
2021 https://syzbot.org/bug?id=84d86f0d71394829df6fc53daf6642c045983881
2021 https://syzbot.org/bug?id=3302dc1c0e2b9c94f2e8edb404eabc9267bc6f90
[1] https://syzkaller.appspot.com/bug?extid=457452d30bcdda75ead2
[2] https://lore.kernel.org/lkml/20250410093146.3776801-2-aitsygunka@yandex.ru/
🎖@cveNotify
🚨 CVE-2026-68457
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: use opener credentials for FSCTL mutations
SET_SPARSE, SET_ZERO_DATA and SET_COMPRESSION operate on an open SMB
handle but call VFS xattr, fallocate or fileattr helpers with the current
ksmbd worker credentials. Those helpers can revalidate inode permissions,
ownership and LSM policy independently of the SMB handle access mask.
Run each operation with the credentials captured in the target file when
the handle was opened. Keep credential handling local to these single-file
FSCTLs rather than applying session credentials to the complete IOCTL
handler, which also contains handle-less and multi-handle operations.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: use opener credentials for FSCTL mutations
SET_SPARSE, SET_ZERO_DATA and SET_COMPRESSION operate on an open SMB
handle but call VFS xattr, fallocate or fileattr helpers with the current
ksmbd worker credentials. Those helpers can revalidate inode permissions,
ownership and LSM policy independently of the SMB handle access mask.
Run each operation with the credentials captured in the target file when
the handle was opened. Keep credential handling local to these single-file
FSCTLs rather than applying session credentials to the complete IOCTL
handler, which also contains handle-less and multi-handle operations.
🎖@cveNotify
🚨 CVE-2026-68458
In the Linux kernel, the following vulnerability has been resolved:
binder: cache secctx size before release zeroes it
binder_transaction() bounds the scatter-gather buffer area with
sg_buf_end_offset and subtracts the aligned LSM context size because
the secctx is written at the tail of that area. The subtraction reads
lsmctx.len, but that field has already been cleared by the time the
line runs:
security_secid_to_secctx(secid, &lsmctx) /* lsmctx.len set */
lsmctx_aligned_size = ALIGN(lsmctx.len, sizeof(u64))
extra_buffers_size += lsmctx_aligned_size
...
security_release_secctx(&lsmctx) /* memset zeroes len */
...
sg_buf_end_offset = sg_buf_offset + extra_buffers_size
- ALIGN(lsmctx.len, sizeof(u64)) /* ALIGN(0,8) */
security_release_secctx() does memset(cp, 0, sizeof(*cp)), so lsmctx.len
reads back as 0 and the subtraction contributes nothing, leaving
sg_buf_end_offset too large by the aligned secctx size on every
transaction to a txn_security_ctx node.
Each BINDER_TYPE_PTR object then derives buf_left = sg_buf_end_offset -
sg_buf_offset as the sole upper bound on its copy, so the inflated end
offset lets the copy run into the bytes that already hold the secctx.
The aligned size must therefore be cached before release rather than
re-read from the now-cleared field. Fix by caching it in
lsmctx_aligned_size at function scope when it is first computed and
subtracting lsmctx_aligned_size instead of re-reading lsmctx.len after
release. Reuse the same value for the earlier buf_offset computation.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
binder: cache secctx size before release zeroes it
binder_transaction() bounds the scatter-gather buffer area with
sg_buf_end_offset and subtracts the aligned LSM context size because
the secctx is written at the tail of that area. The subtraction reads
lsmctx.len, but that field has already been cleared by the time the
line runs:
security_secid_to_secctx(secid, &lsmctx) /* lsmctx.len set */
lsmctx_aligned_size = ALIGN(lsmctx.len, sizeof(u64))
extra_buffers_size += lsmctx_aligned_size
...
security_release_secctx(&lsmctx) /* memset zeroes len */
...
sg_buf_end_offset = sg_buf_offset + extra_buffers_size
- ALIGN(lsmctx.len, sizeof(u64)) /* ALIGN(0,8) */
security_release_secctx() does memset(cp, 0, sizeof(*cp)), so lsmctx.len
reads back as 0 and the subtraction contributes nothing, leaving
sg_buf_end_offset too large by the aligned secctx size on every
transaction to a txn_security_ctx node.
Each BINDER_TYPE_PTR object then derives buf_left = sg_buf_end_offset -
sg_buf_offset as the sole upper bound on its copy, so the inflated end
offset lets the copy run into the bytes that already hold the secctx.
The aligned size must therefore be cached before release rather than
re-read from the now-cleared field. Fix by caching it in
lsmctx_aligned_size at function scope when it is first computed and
subtracting lsmctx_aligned_size instead of re-reading lsmctx.len after
release. Reuse the same value for the earlier buf_offset computation.
🎖@cveNotify
🚨 CVE-2026-68459
In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix potential deadlock in gc_merge path of f2fs_balance_fs()
When we mount device w/ gc_merge mount option, we may suffer below
potential deadlock:
Kworker GC trehad Truncator
- f2fs_write_cache_pages
- f2fs_write_single_data_page
- f2fs_do_write_data_page
- folio_start_writeback --- set writeback flag on folio
- f2fs_outplace_write_data
: cached folio in internal bio cache
- f2fs_balance_fs
- wake_up(gc_thread)
: wake up gc thread to run foreground GC
- finish_wait(fggc_wq)
: wait on the waitqueue --- wait on GC thread to finish the work
- truncate_inode_pages_range
- __filemap_get_folio(, FGP_LOCK) --- lock folio
- truncate_inode_partial_folio
- folio_wait_writeback --- wait on writeback being cleared
- do_garbage_collect
- move_data_page
- f2fs_get_lock_data_folio
- lock on folio --- blocked on folio's lock
In order to avoid such deadlock, let's call below functions to commit
cached bios in GC_MERGE path of f2fs_balance_fs() as the same as we did
in NOGC_MERGE path.
- f2fs_submit_merged_write(sbi, DATA);
- f2fs_submit_all_merged_ipu_writes(sbi);
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix potential deadlock in gc_merge path of f2fs_balance_fs()
When we mount device w/ gc_merge mount option, we may suffer below
potential deadlock:
Kworker GC trehad Truncator
- f2fs_write_cache_pages
- f2fs_write_single_data_page
- f2fs_do_write_data_page
- folio_start_writeback --- set writeback flag on folio
- f2fs_outplace_write_data
: cached folio in internal bio cache
- f2fs_balance_fs
- wake_up(gc_thread)
: wake up gc thread to run foreground GC
- finish_wait(fggc_wq)
: wait on the waitqueue --- wait on GC thread to finish the work
- truncate_inode_pages_range
- __filemap_get_folio(, FGP_LOCK) --- lock folio
- truncate_inode_partial_folio
- folio_wait_writeback --- wait on writeback being cleared
- do_garbage_collect
- move_data_page
- f2fs_get_lock_data_folio
- lock on folio --- blocked on folio's lock
In order to avoid such deadlock, let's call below functions to commit
cached bios in GC_MERGE path of f2fs_balance_fs() as the same as we did
in NOGC_MERGE path.
- f2fs_submit_merged_write(sbi, DATA);
- f2fs_submit_all_merged_ipu_writes(sbi);
🎖@cveNotify
🚨 CVE-2026-68460
In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix potential deadlock in f2fs_balance_fs()
When the f2fs filesystem space is nearly exhausted, we encounter deadlock
issues as below:
INFO: task A:1890 blocked for more than 120 seconds.
Tainted: G O 6.12.41-g3fe07ddf05ab #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:A state:D stack:0 pid:1890 tgid:1626 ppid:1153 flags:0x00000204
Call trace:
__switch_to+0xf4/0x158
__schedule+0x27c/0x908
schedule+0x3c/0x118
io_schedule+0x44/0x68
folio_wait_bit_common+0x174/0x370
folio_wait_bit+0x20/0x38
folio_wait_writeback+0x54/0xc8
truncate_inode_partial_folio+0x70/0x1e0
truncate_inode_pages_range+0x1b0/0x450
truncate_pagecache+0x54/0x88
f2fs_file_write_iter+0x3e8/0xb80
do_iter_readv_writev+0xf0/0x1e0
vfs_writev+0x138/0x2c8
do_writev+0x88/0x130
__arm64_sys_writev+0x28/0x40
invoke_syscall+0x50/0x120
el0_svc_common.constprop.0+0xc8/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x30/0xf8
el0t_64_sync_handler+0x120/0x130
el0t_64_sync+0x190/0x198
INFO: task kworker/u8:11:2680853 blocked for more than 120 seconds.
Tainted: G O 6.12.41-g3fe07ddf05ab #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/u8:11 state:D stack:0 pid:2680853 tgid:2680853 ppid:2 flags:0x00000208
Workqueue: writeback wb_workfn (flush-254:0)
Call trace:
__switch_to+0xf4/0x158
__schedule+0x27c/0x908
schedule+0x3c/0x118
io_schedule+0x44/0x68
folio_wait_bit_common+0x174/0x370
__filemap_get_folio+0x214/0x348
pagecache_get_page+0x20/0x70
f2fs_get_read_data_page+0x150/0x3e8
f2fs_get_lock_data_page+0x2c/0x160
move_data_page+0x50/0x478
do_garbage_collect+0xd38/0x1528
f2fs_gc+0x240/0x7e0
f2fs_balance_fs+0x1a0/0x208
f2fs_write_single_data_page+0x6e4/0x730
f2fs_write_cache_pages+0x378/0x9b0
f2fs_write_data_pages+0x2e4/0x388
do_writepages+0x8c/0x2c8
__writeback_single_inode+0x4c/0x498
writeback_sb_inodes+0x234/0x4a8
__writeback_inodes_wb+0x58/0x118
wb_writeback+0x2f8/0x3c0
wb_workfn+0x2c4/0x508
process_one_work+0x180/0x408
worker_thread+0x258/0x368
kthread+0x118/0x128
ret_from_fork+0x10/0x200
INFO: task kworker/u8:8:2641297 blocked for more than 120 seconds.
Tainted: G O 6.12.41-g3fe07ddf05ab #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/u8:8 state:D stack:0 pid:2641297 tgid:2641297 ppid:2 flags:0x00000208
Workqueue: writeback wb_workfn (flush-254:0)
Call trace:
__switch_to+0xf4/0x158
__schedule+0x27c/0x908
rt_mutex_schedule+0x30/0x60
__rt_mutex_slowlock_locked.constprop.0+0x460/0x8a8
rwbase_write_lock+0x24c/0x378
down_write+0x1c/0x30
f2fs_balance_fs+0x184/0x208
f2fs_write_inode+0xf4/0x328
__writeback_single_inode+0x370/0x498
writeback_sb_inodes+0x234/0x4a8
__writeback_inodes_wb+0x58/0x118
wb_writeback+0x2f8/0x3c0
wb_workfn+0x2c4/0x508
process_one_work+0x180/0x408
worker_thread+0x258/0x368
kthread+0x118/0x128
ret_from_fork+0x10/0x20
INFO: task B:1902 blocked for more than 120 seconds.
Tainted: G O 6.12.41-g3fe07ddf05ab #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:B state:D stack:0 pid:1902 tgid:1626 ppid:1153 flags:0x0000020c
Call trace:
__switch_to+0xf4/0x158
__schedule+0x27c/0x908
rt_mutex_schedule+0x30/0x60
__rt_mutex_slowlock_locked.constprop.0+0x460/0x8a8
rwbase_write_lock+0x24c/0x378
down_write+0x1c/0x30
f2fs_balance_fs+0x184/0x208
f2fs_map_blocks+0x94c/0x1110
f2fs_file_write_iter+0x228/0xb80
do_iter_readv_writev+0xf0/0x1e0
vfs_writev+0x138/0x2c8
do_writev+0x88/0x130
__arm64_sys_writev+0x28/0x40
invoke_syscall+0x50/0x120
el0_svc_common.constprop.0+0xc8/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x30/0xf8
el0t_64_sync_handler+0x120/0x130
el0t_64_sync+0x190/0x198
INFO: task sync:2769849 blocked for more than 120 seconds.
Tainted: G
---truncated---
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix potential deadlock in f2fs_balance_fs()
When the f2fs filesystem space is nearly exhausted, we encounter deadlock
issues as below:
INFO: task A:1890 blocked for more than 120 seconds.
Tainted: G O 6.12.41-g3fe07ddf05ab #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:A state:D stack:0 pid:1890 tgid:1626 ppid:1153 flags:0x00000204
Call trace:
__switch_to+0xf4/0x158
__schedule+0x27c/0x908
schedule+0x3c/0x118
io_schedule+0x44/0x68
folio_wait_bit_common+0x174/0x370
folio_wait_bit+0x20/0x38
folio_wait_writeback+0x54/0xc8
truncate_inode_partial_folio+0x70/0x1e0
truncate_inode_pages_range+0x1b0/0x450
truncate_pagecache+0x54/0x88
f2fs_file_write_iter+0x3e8/0xb80
do_iter_readv_writev+0xf0/0x1e0
vfs_writev+0x138/0x2c8
do_writev+0x88/0x130
__arm64_sys_writev+0x28/0x40
invoke_syscall+0x50/0x120
el0_svc_common.constprop.0+0xc8/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x30/0xf8
el0t_64_sync_handler+0x120/0x130
el0t_64_sync+0x190/0x198
INFO: task kworker/u8:11:2680853 blocked for more than 120 seconds.
Tainted: G O 6.12.41-g3fe07ddf05ab #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/u8:11 state:D stack:0 pid:2680853 tgid:2680853 ppid:2 flags:0x00000208
Workqueue: writeback wb_workfn (flush-254:0)
Call trace:
__switch_to+0xf4/0x158
__schedule+0x27c/0x908
schedule+0x3c/0x118
io_schedule+0x44/0x68
folio_wait_bit_common+0x174/0x370
__filemap_get_folio+0x214/0x348
pagecache_get_page+0x20/0x70
f2fs_get_read_data_page+0x150/0x3e8
f2fs_get_lock_data_page+0x2c/0x160
move_data_page+0x50/0x478
do_garbage_collect+0xd38/0x1528
f2fs_gc+0x240/0x7e0
f2fs_balance_fs+0x1a0/0x208
f2fs_write_single_data_page+0x6e4/0x730
f2fs_write_cache_pages+0x378/0x9b0
f2fs_write_data_pages+0x2e4/0x388
do_writepages+0x8c/0x2c8
__writeback_single_inode+0x4c/0x498
writeback_sb_inodes+0x234/0x4a8
__writeback_inodes_wb+0x58/0x118
wb_writeback+0x2f8/0x3c0
wb_workfn+0x2c4/0x508
process_one_work+0x180/0x408
worker_thread+0x258/0x368
kthread+0x118/0x128
ret_from_fork+0x10/0x200
INFO: task kworker/u8:8:2641297 blocked for more than 120 seconds.
Tainted: G O 6.12.41-g3fe07ddf05ab #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/u8:8 state:D stack:0 pid:2641297 tgid:2641297 ppid:2 flags:0x00000208
Workqueue: writeback wb_workfn (flush-254:0)
Call trace:
__switch_to+0xf4/0x158
__schedule+0x27c/0x908
rt_mutex_schedule+0x30/0x60
__rt_mutex_slowlock_locked.constprop.0+0x460/0x8a8
rwbase_write_lock+0x24c/0x378
down_write+0x1c/0x30
f2fs_balance_fs+0x184/0x208
f2fs_write_inode+0xf4/0x328
__writeback_single_inode+0x370/0x498
writeback_sb_inodes+0x234/0x4a8
__writeback_inodes_wb+0x58/0x118
wb_writeback+0x2f8/0x3c0
wb_workfn+0x2c4/0x508
process_one_work+0x180/0x408
worker_thread+0x258/0x368
kthread+0x118/0x128
ret_from_fork+0x10/0x20
INFO: task B:1902 blocked for more than 120 seconds.
Tainted: G O 6.12.41-g3fe07ddf05ab #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:B state:D stack:0 pid:1902 tgid:1626 ppid:1153 flags:0x0000020c
Call trace:
__switch_to+0xf4/0x158
__schedule+0x27c/0x908
rt_mutex_schedule+0x30/0x60
__rt_mutex_slowlock_locked.constprop.0+0x460/0x8a8
rwbase_write_lock+0x24c/0x378
down_write+0x1c/0x30
f2fs_balance_fs+0x184/0x208
f2fs_map_blocks+0x94c/0x1110
f2fs_file_write_iter+0x228/0xb80
do_iter_readv_writev+0xf0/0x1e0
vfs_writev+0x138/0x2c8
do_writev+0x88/0x130
__arm64_sys_writev+0x28/0x40
invoke_syscall+0x50/0x120
el0_svc_common.constprop.0+0xc8/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x30/0xf8
el0t_64_sync_handler+0x120/0x130
el0t_64_sync+0x190/0x198
INFO: task sync:2769849 blocked for more than 120 seconds.
Tainted: G
---truncated---
🎖@cveNotify
🚨 CVE-2026-68461
In the Linux kernel, the following vulnerability has been resolved:
device property: initialize the remaining fields of fwnode_handle in fwnode_init()
If a firmware node is allocated on the stack (for instance: temporary
software node whose life-time we control) or on the heap - but using a
non-zeroing allocation function - and initialized using fwnode_init(),
its secondary pointer will contain uninitialized memory which likely
will be neither NULL nor IS_ERR() and so may end up being dereferenced
(for example: in dev_to_swnode()). Set fwnode->secondary to NULL on
initialization. While at it: initialize the remaining fields of struct
fwnode_handle too just to be sure.
[ Fix typo in commit message. - Danilo ]
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
device property: initialize the remaining fields of fwnode_handle in fwnode_init()
If a firmware node is allocated on the stack (for instance: temporary
software node whose life-time we control) or on the heap - but using a
non-zeroing allocation function - and initialized using fwnode_init(),
its secondary pointer will contain uninitialized memory which likely
will be neither NULL nor IS_ERR() and so may end up being dereferenced
(for example: in dev_to_swnode()). Set fwnode->secondary to NULL on
initialization. While at it: initialize the remaining fields of struct
fwnode_handle too just to be sure.
[ Fix typo in commit message. - Danilo ]
🎖@cveNotify
🚨 CVE-2026-68462
In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject negative const offsets for buffer pointers
The verifier rejects variable offsets for PTR_TO_TP_BUFFER and PTR_TO_BUF
accesses, but it currently accepts a constant negative offset produced by
pointer arithmetic.
Commit 022ac0750883 ("bpf: use reg->var_off instead of reg->off for
pointers") moved constant pointer offsets from reg->off to reg->var_off.
However, __check_buffer_access() continued to check only the instruction
offset. An access with reg->var_off equal to -8 and an instruction offset
of zero therefore passes verification.
For writable raw tracepoints, the access end is also calculated from the
unsigned reg->var_off.value. An eight-byte access starting at -8 wraps
the calculated end to zero, allowing the program to load and attach
without increasing max_tp_access.
After ensuring that reg->var_off is constant, calculate the effective
access start using signed arithmetic and reject it when it is negative.
Use the validated start to calculate the access end for both
PTR_TO_TP_BUFFER and PTR_TO_BUF.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject negative const offsets for buffer pointers
The verifier rejects variable offsets for PTR_TO_TP_BUFFER and PTR_TO_BUF
accesses, but it currently accepts a constant negative offset produced by
pointer arithmetic.
Commit 022ac0750883 ("bpf: use reg->var_off instead of reg->off for
pointers") moved constant pointer offsets from reg->off to reg->var_off.
However, __check_buffer_access() continued to check only the instruction
offset. An access with reg->var_off equal to -8 and an instruction offset
of zero therefore passes verification.
For writable raw tracepoints, the access end is also calculated from the
unsigned reg->var_off.value. An eight-byte access starting at -8 wraps
the calculated end to zero, allowing the program to load and attach
without increasing max_tp_access.
After ensuring that reg->var_off is constant, calculate the effective
access start using signed arithmetic and reject it when it is negative.
Use the validated start to calculate the access end for both
PTR_TO_TP_BUFFER and PTR_TO_BUF.
🎖@cveNotify
🚨 CVE-2026-68463
In the Linux kernel, the following vulnerability has been resolved:
mmc: sdhci-esdhc-imx: use pm_runtime_resume_and_get() in suspend
Replace pm_runtime_get_sync() with pm_runtime_resume_and_get() to
simplify error handling. pm_runtime_resume_and_get() automatically
drops the usage counter on failure, avoiding the need for a separate
pm_runtime_put_noidle() call. If it fails, the device is unclocked and
accessing hardware registers would cause a kernel panic, so return the
error immediately.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
mmc: sdhci-esdhc-imx: use pm_runtime_resume_and_get() in suspend
Replace pm_runtime_get_sync() with pm_runtime_resume_and_get() to
simplify error handling. pm_runtime_resume_and_get() automatically
drops the usage counter on failure, avoiding the need for a separate
pm_runtime_put_noidle() call. If it fails, the device is unclocked and
accessing hardware registers would cause a kernel panic, so return the
error immediately.
🎖@cveNotify
🚨 CVE-2026-68464
In the Linux kernel, the following vulnerability has been resolved:
mmc: sdhci-esdhc-imx: disable irq during suspend to fix unhandled interrupt
When using WIFI out-of-band wakeup, an "irq xxx: nobody cared" warning
occurs. This happens because the usdhc interrupt is not disabled during
system suspend when device_may_wakeup() returns false.
The sequence of events leading to this issue:
1. System enters suspend without disabling usdhc interrupt
(because device_may_wakeup() returns false for usdhc device)
2. WIFI out-of-band wakeup triggers system resume via GPIO interrupt
3. WIFI sends a Card interrupt before usdhc has fully resumed
4. usdhc is still in runtime suspend state and cannot handle the
interrupt properly
5. The unhandled interrupt triggers "nobody cared" warning
Fix this by unconditionally disabling the usdhc interrupt during suspend
and re-enabling it during resume, regardless of the wakeup capability.
This ensures no interrupts are processed during the suspend/resume
transition.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
mmc: sdhci-esdhc-imx: disable irq during suspend to fix unhandled interrupt
When using WIFI out-of-band wakeup, an "irq xxx: nobody cared" warning
occurs. This happens because the usdhc interrupt is not disabled during
system suspend when device_may_wakeup() returns false.
The sequence of events leading to this issue:
1. System enters suspend without disabling usdhc interrupt
(because device_may_wakeup() returns false for usdhc device)
2. WIFI out-of-band wakeup triggers system resume via GPIO interrupt
3. WIFI sends a Card interrupt before usdhc has fully resumed
4. usdhc is still in runtime suspend state and cannot handle the
interrupt properly
5. The unhandled interrupt triggers "nobody cared" warning
Fix this by unconditionally disabling the usdhc interrupt during suspend
and re-enabling it during resume, regardless of the wakeup capability.
This ensures no interrupts are processed during the suspend/resume
transition.
🎖@cveNotify