🚨 CVE-2026-74424
In the Linux kernel, the following vulnerability has been resolved:

fbcon: fix NULL pointer dereference for a console without vc_data

fbcon_new_modelist() runs when a framebuffer's modelist changes. For each
console mapped to it with fb_display[i].mode set, it reads vc_cons[i].d and
passes the vc_num to fbcon_set_disp(). This assumes a console with a mode
set has a vc_data, but it can be NULL. fbcon_set_disp() sets
fb_display[i].mode before it checks vc_data, and fbcon_deinit() leaves the
mode set after the vc_data is freed. fbcon_new_modelist() then dereferences
the NULL vc_data.

Keep fb_display[i].mode set only while the console has a vc_data. Check
vc_data before setting the mode in fbcon_set_disp(), and clear the mode in
fbcon_deinit(). The existing mode check in fbcon_new_modelist() then skips
such consoles.

🎖@cveNotify

🚨 CVE-2026-74425
In the Linux kernel, the following vulnerability has been resolved:

afs: handle CB.InitCallBackState3 requests without a server record

The cache manager callback path now attaches the server record to an
incoming call through the rxrpc peer's app data. That association is
not guaranteed to exist for every callback request, and most callback
handlers already tolerate that case.

Make CB.InitCallBackState3 follow the same pattern by checking whether a
server record was attached before using it. If the peer is not mapped
to a server record, trace the request and ignore it, matching the
existing behaviour for other unmatched callback requests.

This keeps the callback handler consistent with the rest of the cache
manager service and avoids depending on peer state that may not be
available for a given request.

🎖@cveNotify

🚨 CVE-2026-74426
In the Linux kernel, the following vulnerability has been resolved:

afs: fix NULL pointer dereference in afs_get_tree()

afs_alloc_sbi() uses kzalloc for memory allocation. And, if
ctx->dyn_root is not null, as->cell and as->volume are null.
In trace_afs_get_tree() they are dereferenced.

KASAN error message:

KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 2 PID: 18478 Comm: syz-executor.7 Not tainted 5.10.246-syzkaller #0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1
04/01/2014
RIP: 0010:perf_trace_afs_get_tree+0x1d9/0x550
include/trace/events/afs.h:1365

Call Trace:
trace_afs_get_tree include/trace/events/afs.h:1365 [inline]
afs_get_tree+0x922/0x1350 fs/afs/super.c:599
vfs_get_tree+0x8e/0x300 fs/super.c:1572
do_new_mount fs/namespace.c:3011 [inline]
path_mount+0x14a5/0x2220 fs/namespace.c:3341
do_mount fs/namespace.c:3354 [inline]
__do_sys_mount fs/namespace.c:3562 [inline]
__se_sys_mount fs/namespace.c:3539 [inline]
__x64_sys_mount+0x283/0x300 fs/namespace.c:3539
do_syscall_64+0x33/0x50 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x67/0xd1

Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

🎖@cveNotify

🚨 CVE-2026-74427
In the Linux kernel, the following vulnerability has been resolved:

afs: Fix netns teardown to cancel the preallocation charger

Fix the teardown of an afs network namespace to make sure it cancels the
work item that keeps the preallocated rxrpc call/conn/peer queue charged
before incoming calls are disabled (i.e. listen 0).

Also, if net->live is false because the afs netns is being deleted, make
afs_charge_preallocation() skip charging and make afs_rx_new_call() avoid
requeuing the charger.

(This was found by AI review).

🎖@cveNotify

🚨 CVE-2026-74428
In the Linux kernel, the following vulnerability has been resolved:

rxrpc: Fix double unlock in rxrpc_recvmsg()

Fix a double unlock in rxrpc_recvmsg() when dealing with OOB messages.

🎖@cveNotify

🚨 CVE-2026-74429
In the Linux kernel, the following vulnerability has been resolved:

rxrpc: Fix the reception of a reply packet before data transmission

Fix rxrpc_receiving_reply() to handle the reception of an apparent reply
DATA packet before rxrpc has had a chance to send any request DATA packets
on a client call by checking to see if the call has been exposed yet by
sending the first packet.

Without this, rxrpc_rotate_tx_window() might oops.

Also fix rxrpc_rotate_tx_window() to handle the Tx queue being empty by
changing the do...while loop into a while loop, just in case a call is
abnormally terminated by an early reply before the last request packet is
transmitted.

🎖@cveNotify

🚨 CVE-2026-74430
In the Linux kernel, the following vulnerability has been resolved:

rxrpc: Fix ACKALL packet handling

rxrpc_input_ackall() accepts ACKALL packets without checking whether the
call is in a state that can legitimately have outstanding transmit buffers.
A forged ACKALL can therefore reach a new service call in
RXRPC_CALL_SERVER_RECV_REQUEST before any reply packets have been queued.

In that state call->tx_top is zero and call->tx_queue is NULL, so
rxrpc_rotate_tx_window() dereferences a NULL txqueue and triggers a
null-pointer dereference.

Fix the handling of ACKALL packets by the following means:

(1) Add two new call states: RXRPC_CALL_CLIENT_PRE_SEND which indicates
that the client call is connected, but nothing has been transmitted as
yet; and RXRPC_CALL_CLIENT_AWAIT_ACK, which indicates that everything
has been transmitted at least once, but we're now waiting for the
stuff remaining in the Tx buffer to be ACK'd (retransmissions may
still happen).

The RXRPC_CALL_CLIENT_PRE_SEND state is set when the call is assigned
a channel and transitions to RXRPC_CALL_CLIENT_SEND_REQUEST when the
first packet is transmitted.

RXRPC_CALL_CLIENT_AWAIT_REPLY is then narrowed in scope to indicate
that all Tx packets have been ACK'd and we're now waiting for the
reply to be received.

(2) As per Wyatt Feng's original patch[1], the ACKALL handler then checks
that the call state is one in which there might be stuff in the Tx
buffer to ACK, but now this includes AWAIT_ACK rather than
AWAIT_REPLY. ACKALL packets are ignored if received in the wrong
state.

Note that unlike Wyatt Feng's patch, it's no longer necessary to check
to see if the Tx buffer exists as this the state set now covers this.

(3) Make the ACKALL handler use call->tx_transmitted rather than
call->tx_top as the former is explicitly the highest packet seq number
transmitted, whereas the latter has a looser definition.

Thanks to Jeffrey Altman for a description of the history of the ACKALL
packet[1].

🎖@cveNotify

🚨 CVE-2026-74431
In the Linux kernel, the following vulnerability has been resolved:

rxrpc: Fix potential infinite loop in rxrpc_recvmsg()

Fix the wait in rxrpc_recvmsg() also take check the oob queue.

🎖@cveNotify

🚨 CVE-2026-74432
In the Linux kernel, the following vulnerability has been resolved:

rxrpc: Fix leak of released call in recvmsg(MSG_PEEK)

Fix rxrpc_recvmsg() to also drop the ref it holds on an already-released
call if MSG_PEEK is in force (the function holds a ref on the call
irrespective of whether MSG_PEEK is specified or not).

🎖@cveNotify

🚨 CVE-2026-74433
In the Linux kernel, the following vulnerability has been resolved:

rxrpc: Fix UAF in rxgk_issue_challenge()

Fix rxgk_issue_challenge() to free the page containing the challenge
content after invoking the tracepoint as the whdr passed to the tracepoint
points into the page just freed.

🎖@cveNotify

🚨 CVE-2026-74434
In the Linux kernel, the following vulnerability has been resolved:

rxrpc: Don't move a peeked OOB message onto the pending queue

rxrpc_recvmsg_oob() takes a received oob message off recvmsg_oobq and,
if a response is needed, moves it onto the pending_oobq tree. However,
only the unlink from recvmsg_oobq is guarded by MSG_PEEK; the move onto
pending_oobq always runs.

As a result, reading a challenge with MSG_PEEK leaves the skb on
recvmsg_oobq while also adding it to pending_oobq. Since struct
sk_buff's rbnode shares storage with its next and prev pointers,
rb_insert_color() overwrites the list linkage, and the skb, which holds
a single reference, becomes reachable from both queues at once.

When the socket is closed both queues are drained in turn. While
draining recvmsg_oobq, __skb_unlink() follows the next and prev
pointers that rbnode has overwritten and writes to a bad address. Also,
as the skb holds a single reference but is freed from each queue, both
the skb and the connection reference it holds are released twice. This
leads to memory corruption and to a use-after-free caused by the
connection refcount underflow.

MSG_PEEK does not consume the message from the queue, so only unlink it
from recvmsg_oobq and then move it onto pending_oobq or free it when
the message is actually consumed.

🎖@cveNotify

🚨 CVE-2026-74435
In the Linux kernel, the following vulnerability has been resolved:

rxrpc: rxrpc_verify_data ensure rx_dec_buffer alloc

rxrpc_recvmsg_data() calls rxrpc_verify_data() whenever the
rxrpc_call.rx_dec_buffer is unallocated and assumes that upon
successful return that rx_dec_buffer must be allocated.
However, rxrpc_verify_data() does not request an allocation if
the rxrpc_skb_priv.len is zero.

In addition, failure to allocate rx_dec_buffer will result in a
call to skb_copy_bits() with a NULL destination which can
trigger a NULL pointer dereference.

To prevent these issues rxrpc_verify_data() is modified to
always attempt to allocate the rxrpc_call.rx_dec_buffer if it
is NULL.

This issue was identified with assistance of a private
sashiko instance.

🎖@cveNotify

🚨 CVE-2026-74436
In the Linux kernel, the following vulnerability has been resolved:

rxrpc: serialize kernel accept preallocation with socket teardown

rxrpc_kernel_charge_accept() reads rx->backlog without any
socket/backlog synchronization and passes that raw pointer into
rxrpc_service_prealloc_one(). A concurrent rxrpc_discard_prealloc()
sets rx->backlog = NULL and frees the backlog rings, so a kernel
preallocation worker can keep using a freed struct rxrpc_backlog
while updating *_backlog_head/tail and array slots.

Serialize the state check and backlog lookup with the socket lock,
and reject kernel preallocation once teardown has disabled
listening or discarded the service backlog.

🎖@cveNotify

🚨 CVE-2026-74437
In the Linux kernel, the following vulnerability has been resolved:

media: uvcvideo: Fix deadlock if uvc_status_stop is called from async_ctrl.work

If a UVC camera has an asynchronous control, uvc_status_stop may be
called from async_ctrl.work:

uvc_ctrl_status_event_work()
uvc_ctrl_status_event()
uvc_ctrl_clear_handle()
uvc_pm_put()
uvc_status_put()
uvc_status_stop()
cancel_work_sync()

This will cause a deadlock, since cancel_work_sync will wait for
uvc_ctrl_status_event_work to complete before returning.

Fix this by returning early from uvc_status_stop if we are currently in
the work function. flush_status now remains false until uvc_status_start
is called again, ensuring that uvc_ctrl_status_event_work won't resubmit
the URB.

🎖@cveNotify

🚨 CVE-2026-74438
In the Linux kernel, the following vulnerability has been resolved:

crypto: sun4i-ss - Remove insecure and unused rng_alg

Remove sun4i_ss_rng, as it is insecure and unused:

- It has multiple vulnerabilities. sun4i_ss_prng_seed() is missing
locking and has a buffer overflow. sun4i_ss_prng_generate() fails to
fill the entire buffer with cryptographic random bytes, because it
rounds the destination length down and also doesn't actually wait for
the hardware to be ready before pulling bytes from it.

- No user of this code is known. It's usable only theoretically via the
"rng" algorithm type of AF_ALG. But userspace actually just uses the
actual Linux RNG (/dev/random etc) instead. And rng_algs don't
contribute entropy to the actual Linux RNG either. (This may have
been confused with hwrng, which does contribute entropy.)

The sun4i_ss_prng_seed() buffer overflow was reported by Tianchu Chen
and discovered by Atuin - Automated Vulnerability Discovery Engine

There's no point in fixing all these vulnerabilities individually when
this is unused code, so let's just remove it.

🎖@cveNotify

🚨 CVE-2026-74439
In the Linux kernel, the following vulnerability has been resolved:

iommu/vt-d: Clear Present bit before tearing down scalable-mode context entry

device_pasid_table_teardown() zeroes the 128-bit scalable-mode context
entry with context_clear_entry() while the Present bit is still set. This
creates a window where the hardware can fetch a torn entry, with some
fields already zeroed while Present is still set, leading to unpredictable
behavior or spurious faults. The context-cache invalidation is issued only
after the entry has been zeroed, and intel_pasid_free_table() then frees
the PASID directory pages, so the IOMMU can keep walking a stale Present=1
entry that points at freed memory.

While x86 provides strong write ordering, the compiler may reorder the two
64-bit writes to the entry, and the hardware fetch is not guaranteed to be
atomic with respect to multiple CPU writes.

Commit c1e4f1dccbe9d ("iommu/vt-d: Clear Present bit before tearing down
context entry") fixed this exact pattern in domain_context_clear_one() and
the copied-context path, but device_pasid_table_teardown() was not
converted.

Align it with the "Guidance to Software for Invalidations" in the VT-d
spec, Section 6.5.3.3, using the same ownership handshake as the sibling
fix: clear only the Present bit, flush it to the IOMMU, perform the
context-cache invalidation, and only then zero the rest of the entry.

🎖@cveNotify

🚨 CVE-2026-14279
The Wholesale Market plugin for WordPress is vulnerable to privilege escalation in versions up to, and including, 2.2.2 via the ced_wholesale_request_send AJAX action. The ced_wholesale_request_send_callback() handler only verifies a nonce (which is exposed to any authenticated user through wp_localize_script on the frontend) and that the caller has a positive user ID, then calls WP_User::add_role() with the client-supplied role_required POST parameter without restricting the value to an allowlist of wholesale roles. This makes it possible for authenticated attackers, with Subscriber-level access and above, to elevate their privileges to Administrator when the site administrator has enabled the 'Assigning requested role directly' option.

🎖@cveNotify

🚨 CVE-2026-15826
The User Profile Builder plugin for WordPress is vulnerable to Authentication Bypass via Type Confusion in versions up to, and including, 3.16.4. This is due to the wppb_log_in_user() function calling absint() on the return value of wp_insert_user() before performing an is_wp_error() check — when a registration is submitted with a 61–70 character username, WordPress core rejects it with a WP_Error object, but absint() coerces that object to the integer 1 before the error check can short-circuit execution, causing the plugin to bind and return a transient-backed autologin nonce tied to user ID 1. This makes it possible for unauthenticated attackers to log in as the site's Administrator account (user ID 1), resulting in full administrative takeover of the site.

🎖@cveNotify

🚨 CVE-2026-15142
The Real Estate Manager Pro plugin for WordPress is vulnerable to Privilege Escalation in all versions up to, and including, 12.8.6. This is due to improper capability handling in the allow_attachment_actions() function, which can treat a target user ID as a media attachment ID during user capability checks. This makes it possible for authenticated attackers, with Subscriber-level access and above, to edit an administrator account and escalate their privileges to Administrator when the targeted user ID matches the ID of an existing media attachment.

🎖@cveNotify

🚨 CVE-2026-16142
The TrueBooker plugin for WordPress is vulnerable to Account Takeover in all versions up to, and including, 1.2.6. This is due to the add_front_user_update() AJAX handler being registered for unauthenticated users and accepting an arbitrary truebooker_wp_user_id value, which is passed directly to wp_update_user() without verifying authentication or ownership. This makes it possible for unauthenticated attackers to change any WordPress user account email address, including an administrator, by submitting the target user ID and an attacker-controlled email address. An attacker can then use the native WordPress password reset flow to receive the reset link at the attacker-controlled email address and take over the account.

🎖@cveNotify

🚨 CVE-2026-18438
The Templately – Elementor & Gutenberg Template Library: 6500+ Free & Pro Ready Templates And Cloud! plugin for WordPress is vulnerable to Remote Code Execution in all versions up to, and including, 3.7.1 via the fetch_remote_file function. This is due to a filename validation/destination mismatch in fetch_remote_file, where file type validation is performed against the attacker-controlled Content-Disposition filename rather than the URL-path-derived destination filename. This makes it possible for authenticated attackers, with contributor-level access and above, to execute code on the server. A GIF+PHP polyglot file passes wp_check_filetype_and_ext validation as image/gif via the Content-Disposition filename, while the actual destination path is written with a .php extension derived from the URL path, bypassing the unfiltered_upload capability gate entirely. The affected endpoints are reachable at this privilege level because Templately's entire REST API — including the cloud import endpoints used in this attack (/templately/v1/clouds/upload and /templately/v1/insert) — is authorized only by a current_user_can('delete_posts') check, with no administrator or manage_options capability requirement. The same permission gate also allows a contributor to overwrite the site's global Templately cloud connection via the /templately/v1/login endpoint with global_signin set to true. A complete remediation should both correct fetch_remote_file to validate the file type against the actual destination filename rather than the Content-Disposition header (and avoid deriving the write path from the request URL), and restrict state-changing Templately REST routes to an appropriate administrator-level capability.

🎖@cveNotify