🚨 CVE-2026-68459
In the Linux kernel, the following vulnerability has been resolved:

f2fs: fix potential deadlock in gc_merge path of f2fs_balance_fs()

When we mount device w/ gc_merge mount option, we may suffer below
potential deadlock:

Kworker GC trehad Truncator
- f2fs_write_cache_pages
- f2fs_write_single_data_page
- f2fs_do_write_data_page
- folio_start_writeback --- set writeback flag on folio
- f2fs_outplace_write_data
: cached folio in internal bio cache
- f2fs_balance_fs
- wake_up(gc_thread)
: wake up gc thread to run foreground GC
- finish_wait(fggc_wq)
: wait on the waitqueue --- wait on GC thread to finish the work
- truncate_inode_pages_range
- __filemap_get_folio(, FGP_LOCK) --- lock folio
- truncate_inode_partial_folio
- folio_wait_writeback --- wait on writeback being cleared
- do_garbage_collect
- move_data_page
- f2fs_get_lock_data_folio
- lock on folio --- blocked on folio's lock

In order to avoid such deadlock, let's call below functions to commit
cached bios in GC_MERGE path of f2fs_balance_fs() as the same as we did
in NOGC_MERGE path.
- f2fs_submit_merged_write(sbi, DATA);
- f2fs_submit_all_merged_ipu_writes(sbi);

🎖@cveNotify

🚨 CVE-2026-68460
In the Linux kernel, the following vulnerability has been resolved:

f2fs: fix potential deadlock in f2fs_balance_fs()

When the f2fs filesystem space is nearly exhausted, we encounter deadlock
issues as below:

INFO: task A:1890 blocked for more than 120 seconds.
Tainted: G O 6.12.41-g3fe07ddf05ab #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:A state:D stack:0 pid:1890 tgid:1626 ppid:1153 flags:0x00000204
Call trace:
__switch_to+0xf4/0x158
__schedule+0x27c/0x908
schedule+0x3c/0x118
io_schedule+0x44/0x68
folio_wait_bit_common+0x174/0x370
folio_wait_bit+0x20/0x38
folio_wait_writeback+0x54/0xc8
truncate_inode_partial_folio+0x70/0x1e0
truncate_inode_pages_range+0x1b0/0x450
truncate_pagecache+0x54/0x88
f2fs_file_write_iter+0x3e8/0xb80
do_iter_readv_writev+0xf0/0x1e0
vfs_writev+0x138/0x2c8
do_writev+0x88/0x130
__arm64_sys_writev+0x28/0x40
invoke_syscall+0x50/0x120
el0_svc_common.constprop.0+0xc8/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x30/0xf8
el0t_64_sync_handler+0x120/0x130
el0t_64_sync+0x190/0x198

INFO: task kworker/u8:11:2680853 blocked for more than 120 seconds.
Tainted: G O 6.12.41-g3fe07ddf05ab #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/u8:11 state:D stack:0 pid:2680853 tgid:2680853 ppid:2 flags:0x00000208
Workqueue: writeback wb_workfn (flush-254:0)
Call trace:
__switch_to+0xf4/0x158
__schedule+0x27c/0x908
schedule+0x3c/0x118
io_schedule+0x44/0x68
folio_wait_bit_common+0x174/0x370
__filemap_get_folio+0x214/0x348
pagecache_get_page+0x20/0x70
f2fs_get_read_data_page+0x150/0x3e8
f2fs_get_lock_data_page+0x2c/0x160
move_data_page+0x50/0x478
do_garbage_collect+0xd38/0x1528
f2fs_gc+0x240/0x7e0
f2fs_balance_fs+0x1a0/0x208
f2fs_write_single_data_page+0x6e4/0x730
f2fs_write_cache_pages+0x378/0x9b0
f2fs_write_data_pages+0x2e4/0x388
do_writepages+0x8c/0x2c8
__writeback_single_inode+0x4c/0x498
writeback_sb_inodes+0x234/0x4a8
__writeback_inodes_wb+0x58/0x118
wb_writeback+0x2f8/0x3c0
wb_workfn+0x2c4/0x508
process_one_work+0x180/0x408
worker_thread+0x258/0x368
kthread+0x118/0x128
ret_from_fork+0x10/0x200

INFO: task kworker/u8:8:2641297 blocked for more than 120 seconds.
Tainted: G O 6.12.41-g3fe07ddf05ab #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/u8:8 state:D stack:0 pid:2641297 tgid:2641297 ppid:2 flags:0x00000208
Workqueue: writeback wb_workfn (flush-254:0)
Call trace:
__switch_to+0xf4/0x158
__schedule+0x27c/0x908
rt_mutex_schedule+0x30/0x60
__rt_mutex_slowlock_locked.constprop.0+0x460/0x8a8
rwbase_write_lock+0x24c/0x378
down_write+0x1c/0x30
f2fs_balance_fs+0x184/0x208
f2fs_write_inode+0xf4/0x328
__writeback_single_inode+0x370/0x498
writeback_sb_inodes+0x234/0x4a8
__writeback_inodes_wb+0x58/0x118
wb_writeback+0x2f8/0x3c0
wb_workfn+0x2c4/0x508
process_one_work+0x180/0x408
worker_thread+0x258/0x368
kthread+0x118/0x128
ret_from_fork+0x10/0x20

INFO: task B:1902 blocked for more than 120 seconds.
Tainted: G O 6.12.41-g3fe07ddf05ab #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:B state:D stack:0 pid:1902 tgid:1626 ppid:1153 flags:0x0000020c
Call trace:
__switch_to+0xf4/0x158
__schedule+0x27c/0x908
rt_mutex_schedule+0x30/0x60
__rt_mutex_slowlock_locked.constprop.0+0x460/0x8a8
rwbase_write_lock+0x24c/0x378
down_write+0x1c/0x30
f2fs_balance_fs+0x184/0x208
f2fs_map_blocks+0x94c/0x1110
f2fs_file_write_iter+0x228/0xb80
do_iter_readv_writev+0xf0/0x1e0
vfs_writev+0x138/0x2c8
do_writev+0x88/0x130
__arm64_sys_writev+0x28/0x40
invoke_syscall+0x50/0x120
el0_svc_common.constprop.0+0xc8/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x30/0xf8
el0t_64_sync_handler+0x120/0x130
el0t_64_sync+0x190/0x198

INFO: task sync:2769849 blocked for more than 120 seconds.
Tainted: G
---truncated---

🎖@cveNotify

🚨 CVE-2026-68461
In the Linux kernel, the following vulnerability has been resolved:

device property: initialize the remaining fields of fwnode_handle in fwnode_init()

If a firmware node is allocated on the stack (for instance: temporary
software node whose life-time we control) or on the heap - but using a
non-zeroing allocation function - and initialized using fwnode_init(),
its secondary pointer will contain uninitialized memory which likely
will be neither NULL nor IS_ERR() and so may end up being dereferenced
(for example: in dev_to_swnode()). Set fwnode->secondary to NULL on
initialization. While at it: initialize the remaining fields of struct
fwnode_handle too just to be sure.

[ Fix typo in commit message. - Danilo ]

🎖@cveNotify

🚨 CVE-2026-68462
In the Linux kernel, the following vulnerability has been resolved:

bpf: Reject negative const offsets for buffer pointers

The verifier rejects variable offsets for PTR_TO_TP_BUFFER and PTR_TO_BUF
accesses, but it currently accepts a constant negative offset produced by
pointer arithmetic.

Commit 022ac0750883 ("bpf: use reg->var_off instead of reg->off for
pointers") moved constant pointer offsets from reg->off to reg->var_off.
However, __check_buffer_access() continued to check only the instruction
offset. An access with reg->var_off equal to -8 and an instruction offset
of zero therefore passes verification.

For writable raw tracepoints, the access end is also calculated from the
unsigned reg->var_off.value. An eight-byte access starting at -8 wraps
the calculated end to zero, allowing the program to load and attach
without increasing max_tp_access.

After ensuring that reg->var_off is constant, calculate the effective
access start using signed arithmetic and reject it when it is negative.
Use the validated start to calculate the access end for both
PTR_TO_TP_BUFFER and PTR_TO_BUF.

🎖@cveNotify

🚨 CVE-2026-68463
In the Linux kernel, the following vulnerability has been resolved:

mmc: sdhci-esdhc-imx: use pm_runtime_resume_and_get() in suspend

Replace pm_runtime_get_sync() with pm_runtime_resume_and_get() to
simplify error handling. pm_runtime_resume_and_get() automatically
drops the usage counter on failure, avoiding the need for a separate
pm_runtime_put_noidle() call. If it fails, the device is unclocked and
accessing hardware registers would cause a kernel panic, so return the
error immediately.

🎖@cveNotify

🚨 CVE-2026-68464
In the Linux kernel, the following vulnerability has been resolved:

mmc: sdhci-esdhc-imx: disable irq during suspend to fix unhandled interrupt

When using WIFI out-of-band wakeup, an "irq xxx: nobody cared" warning
occurs. This happens because the usdhc interrupt is not disabled during
system suspend when device_may_wakeup() returns false.

The sequence of events leading to this issue:
1. System enters suspend without disabling usdhc interrupt
(because device_may_wakeup() returns false for usdhc device)
2. WIFI out-of-band wakeup triggers system resume via GPIO interrupt
3. WIFI sends a Card interrupt before usdhc has fully resumed
4. usdhc is still in runtime suspend state and cannot handle the
interrupt properly
5. The unhandled interrupt triggers "nobody cared" warning

Fix this by unconditionally disabling the usdhc interrupt during suspend
and re-enabling it during resume, regardless of the wakeup capability.
This ensures no interrupts are processed during the suspend/resume
transition.

🎖@cveNotify

🚨 CVE-2026-68465
In the Linux kernel, the following vulnerability has been resolved:

mmc: sdhci-esdhc-imx: fix esdhc_change_pinstate() to allow default state restore

esdhc_change_pinstate() checks for pins_100mhz and pins_200mhz at the
top of the function and returns -EINVAL if either is not defined. This
prevents the default case from ever being reached, which means devices
with a sleep pinctrl state but without high-speed pin states (100mhz/
200mhz) can never restore their default pin configuration.

Move the IS_ERR checks for pins_100mhz and pins_200mhz into their
respective switch cases.

🎖@cveNotify

🚨 CVE-2026-68466
In the Linux kernel, the following vulnerability has been resolved:

mtd: rawnand: lpc32xx_slc: fail DMA transfer on completion timeout

lpc32xx_xmit_dma() waits for the DMA completion callback but ignores
wait_for_completion_timeout(). A timed out DMA transfer is therefore
unmapped and reported as successful to the NAND read/write path.

Return -ETIMEDOUT when the completion wait expires. Terminate the DMA
channel before unmapping the scatterlist so the timed out transfer cannot
continue to access the buffer after the error is returned.

🎖@cveNotify

🚨 CVE-2026-68467
In the Linux kernel, the following vulnerability has been resolved:

mtd: mchp23k256: use SPI match data for chip caps

The driver stores chip capacity information in both the OF match table
and the SPI id table. Probe currently uses of_device_get_match_data(),
so a non-OF SPI modalias match falls back to mchp23k256_caps even when
the SPI id table selected a different part.

Use spi_get_device_match_data() so SPI id-table driver_data is consumed
when OF match data is absent. This keeps the existing default fallback
while avoiding the wrong MTD geometry for id-table-only matches.

🎖@cveNotify

🚨 CVE-2026-68469
In the Linux kernel, the following vulnerability has been resolved:

wifi: mwifiex: fix permanently busy scans after multiple roam iterations

In order for the firmware to sleep, the driver has to confirm a
previously received sleep request. The normal sequence of evets goes
like this:
EVENT_SLEEP -> adapter->ps_state = PS_STATE_PRE_SLEEP -> sleep-confirm
-> SLEEP -> EVENT_AWAKE -> AWAKE.
Before sending the sleep-confirm command, the driver must make sure
there are no commands either running or waiting to be completed.

mwifiex_ret_802_11_associate() unconditionally sets
ps_state = PS_STATE_AWAKE when it processes the association command
response, outside of the normal powersave management flow. If
EVENT_SLEEP arrives while the association command is in flight,
ps_state is PRE_SLEEP when the association command response is parsed,
and the forced AWAKE overwrites it. The deferred sleep-confirm is
never sent.

A subsequent scan_start command is correctly acknowledged, but the
firmware doesn't generate scan_result events. The scan request never
finishes, and additional requests from userspace fail with -EBUSY.

After testing on both IW412 and W8997, I could only trigger the bug on
the IW412 and observed the firmwares behave differently. On the IW412
the firmware still sends EVENT_SLEEP while the authentication /
association process is ongoing. A W8997 under the same
conditions seems to suppress power-save for the duration of the
association, so PRE_SLEEP never coincided with the association response
even after extended periods of testing using the loops
described below (>12hours).

On the IW412, the delay between commands that triggers an EVENT_SLEEP
was empirically determined to be ~20ms. This delay can naturally occur
when the driver is outputting debugging information
(debug_mask = 0x00000037), in which situation the busy scans issue is
repeatable while running "test 1)" as described below. If the delay
between commands is less than ~20ms, the firmware stays awake and
the issue was not reproducible running the same test.

The host_mlme=false path also behaves differently. In this case, the
entire authentication / association transaction is executed by one
command (HostCmd_CMD_802_11_ASSOCIATE), and the firmware doesn't emit
EVENT_SLEEP while the command is running.

Remove the assignment so the ps_state is only manipulated in the paths
that are related to powersave event handling and on the main workqueue
for correct sleep confirmation.

The following loop tests were performed (with debugging output enabled):
1) force roaming between two AP's, one 5GHz and one 2.4GHz, same
SSID. Use wpa_cli to trigger the roaming behavior, sleep 2s
between iterations.
2) force a disconnection to AP 1 and a connection to AP 2, test
scan. Use wpa_cli to trigger the connection changes, sleep 2s
between iterations.

Each test ran in each device for at least 3 hours.

🎖@cveNotify

🚨 CVE-2026-68470
In the Linux kernel, the following vulnerability has been resolved:

wifi: mac80211: validate extension-frame layout before RX

Extension frames only have the extension header at the regular 802.11
header offset. The generic RX path can still reach helpers and interface
dispatch code that read regular header address fields before unsupported
extension subtypes are dropped.

mac80211 currently only handles S1G beacon extension frames. Drop other
extension subtypes before they can reach regular-header RX processing.
For S1G beacons, linearize the SKB with the management-frame path and
require the fixed S1G beacon header, including optional fixed fields
indicated by frame control, before generic RX dispatch.

Route S1G beacons through the station/default-link RX path without
regular-header station lookup. Avoid regular-header address reads in the
mac80211 RX paths that process S1G extension beacons, including
accept-frame, duplicate-detection, address-copy, and MLO
address-translation paths.

Also make ieee80211_get_bssid() length-safe before returning the S1G
source-address pointer.

🎖@cveNotify

🚨 CVE-2026-68471
In the Linux kernel, the following vulnerability has been resolved:

wifi: ieee80211: validate MLE common info length

ieee80211_mle_common_size() uses the first common-info octet as the
common information length for all known MLE types. However,
ieee80211_mle_size_ok() only validates that octet for Basic, Probe
Request, and TDLS MLEs.

Reconfiguration MLEs also skipped the length octet when calculating the
minimum common size, and Priority Access MLEs skipped validation of the
advertised common information length.

Account for the Reconfiguration common-info length octet and validate
the advertised common information length for all known MLE types. Keep
unknown-type handling unchanged.

[remove now misleading comment]

🎖@cveNotify

🚨 CVE-2026-68472
In the Linux kernel, the following vulnerability has been resolved:

wifi: cfg80211: validate EHT MLE before MLD ID read

cfg80211_gen_new_ie() copies ML probe response elements from
the parent frame when the parent EHT multi-link element has an
MLD ID matching the nontransmitted BSSID index.

The code only checked that the extension element had more than
one byte before calling ieee80211_mle_get_mld_id(). That helper
assumes a BASIC MLE with enough common info and documents that
callers must first use ieee80211_mle_type_ok().

Attack chain:
malicious AP sends a short EHT MLE in an MBSSID beacon.
cfg80211_inform_bss_frame_data() stores the copied IE buffer.
cfg80211_parse_mbssid_data() builds the nontransmitted BSS IE.
cfg80211_gen_new_ie() sees the EHT MLE in the parent frame.
ieee80211_mle_get_mld_id() then reads past the IE boundary.

Validate the MLE type and size before reading the MLD ID. This
matches the contract required by the MLE helper and rejects the
short element before any internal MLE fields are accessed.

🎖@cveNotify

🚨 CVE-2026-68473
In the Linux kernel, the following vulnerability has been resolved:

powerpc/uaccess: correct check for CONFIG_PPC_E500 in mask_user_address()

mask_user_address() incorrectly checks for CONFIG_E500 instead of
CONFIG_PPC_E500, causing mask_user_address_isel() to not be used on
E500 hardware. Fix the check to use the correct name.

🎖@cveNotify

🚨 CVE-2026-68474
In the Linux kernel, the following vulnerability has been resolved:

powerpc/spufs: fix out-of-bounds access in spufs_mem_mmap_access()

spufs_mem_mmap_access() computes the local store offset as
address - vma->vm_start, but bounds-checks it against vma->vm_end
instead of the local store size. On 64-bit, offset is always well
below vma->vm_end, so the clamp never fires and len stays unbounded
against the LS_SIZE buffer returned by ctx->ops->get_ls().

Reject offsets at or beyond LS_SIZE and clamp len to the remaining
space, mirroring the guard already used by spufs_mem_mmap_fault() and
spufs_ps_fault().

🎖@cveNotify

🚨 CVE-2026-68479
In the Linux kernel, the following vulnerability has been resolved:

Bluetooth: btrtl: validate firmware patch bounds

rtlbt_parse_firmware() copies patch_length - 4 bytes before appending the
firmware version. A malformed firmware patch shorter than the version field
can make this subtraction underflow and turn the copy into an oversized
read and write during Bluetooth setup.

The existing patch_offset + patch_length check can also wrap on 32-bit
architectures. Validate the patch length and range without arithmetic
overflow before allocating or copying the patch.

🎖@cveNotify

🚨 CVE-2026-72003
In the Linux kernel, the following vulnerability has been resolved:

wifi: brcmfmac: cyw: fix heap overflow on a short auth frame

brcmf_notify_auth_frame_rx() takes the frame length from the firmware
event and copies the frame body with the management header offset
subtracted:

u32 mgmt_frame_len = e->datalen - sizeof(struct brcmf_rx_mgmt_data);
...
memcpy(&mgmt_frame->u, frame,
mgmt_frame_len - offsetof(struct ieee80211_mgmt, u));

The only length check is e->datalen >= sizeof(*rxframe), so mgmt_frame_len
can be anything from 0 up. offsetof(struct ieee80211_mgmt, u) is 24. When
mgmt_frame_len is below that, the subtraction wraps as an unsigned value to
a huge length. The memcpy then runs far past the kzalloc'd buffer. A
malicious or malfunctioning AP can make the frame short during the
external SAE auth exchange, so this is a remotely triggered heap overflow.

Reject frames shorter than the management header offset before the copy.

🎖@cveNotify

🚨 CVE-2026-72004
In the Linux kernel, the following vulnerability has been resolved:

wifi: mac80211: fix memory leak in ieee80211_register_hw()

If kmemdup() fails while copying supported band structures, the error
path jumps to fail_rate. This skips rate_control_deinitialize() and
leaks the initialized local->rate_ctrl.

Fix this by adding a fail_band label that shares the rate-control cleanup
path before falling through to the remaining teardown.

The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still present in
v7.1-rc7.

An x86_64 allyesconfig build showed no new warnings. As we do not have a
suitable mac80211 device/driver combination to test with, no runtime
testing was able to be performed.

🎖@cveNotify

🚨 CVE-2026-72005
In the Linux kernel, the following vulnerability has been resolved:

wifi: rt2x00: avoid full teardown before work setup in probe

rt2x00lib_probe_dev() uses the full rt2x00lib_remove_dev() teardown for
all probe failures. However, drv_data allocation and workqueue allocation
can fail before intf_work, autowakeup_work and sleep_work have been
initialized.

Do not enter the full remove path until the probe has reached the point
where those work items are set up. Return directly for drv_data allocation
failure, and use a small early cleanup path for workqueue allocation
failure.

This issue was found by our static analysis tool and then confirmed by
manual review of rt2x00lib_probe_dev() and rt2x00lib_remove_dev(). The
early probe exits should not call a common teardown path that assumes the
later work setup has already completed.

A QEMU PoC forced alloc_ordered_workqueue() to fail before the work
initializers are reached. The resulting fail path entered
rt2x00lib_remove_dev(), and DEBUG_OBJECTS reported invalid work drains with
rt2x00lib_probe_dev() and rt2x00lib_remove_dev() in the stack.

🎖@cveNotify

🚨 CVE-2026-72006
In the Linux kernel, the following vulnerability has been resolved:

net/mlx5: free mlx5_st_idx_data on final dealloc

Workloads that repeatedly allocate and release mkeys carrying TPH
steering-tag hints (e.g. churning RDMA MRs) leak one
struct mlx5_st_idx_data per cycle; kmemleak flags it as unreferenced
and the kmalloc slab grows over time.

When the last reference to an ST table entry is dropped,
mlx5_st_dealloc_index() removed the entry from idx_xa but the backing
mlx5_st_idx_data allocation was never freed.

Free idx_data after the xa_erase() so the lifetime of the bookkeeping
struct matches the lifetime of the ST entry it tracks.

🎖@cveNotify

🚨 CVE-2026-72007
In the Linux kernel, the following vulnerability has been resolved:

pmdomain: imx: Fix i.MX8MP VC8000E power up sequence

Per errata[1]:
ERR050531: VPU_NOC power down handshake may hang during VC8000E/VPUMIX
power up/down cycling.
Description: VC8000E reset de-assertion edge and AXI clock may have a
timing issue.
Workaround: Set bit2 (vc8000e_clk_en) of BLK_CLK_EN_CSR to 0 to gate off
both AXI clock and VC8000E clock sent to VC8000E and AXI clock sent to
VPU_NOC m_v_2 interface during VC8000E power up(VC8000E reset is
de-asserted by HW)

Add a bool variable is_errata_err050531 in
'struct imx8m_blk_ctrl_domain_data' to represent whether the workaround
is needed. If is_errata_err050531 is true, first clear the clk before
powering up gpc, then enable the clk after powering up gpc.

[1] https://www.nxp.com/webapp/Download?colCode=IMX8MP_1P33A

🎖@cveNotify