🚨 CVE-2025-43441
The issue was addressed with improved memory handling. This issue is fixed in Safari 26.1, iOS 18.7.2 and iPadOS 18.7.2, iOS 26.1 and iPadOS 26.1, macOS Tahoe 26.1, tvOS 26.1, visionOS 26.1. Processing maliciously crafted web content may lead to an unexpected process crash.
🎖@cveNotify
The issue was addressed with improved memory handling. This issue is fixed in Safari 26.1, iOS 18.7.2 and iPadOS 18.7.2, iOS 26.1 and iPadOS 26.1, macOS Tahoe 26.1, tvOS 26.1, visionOS 26.1. Processing maliciously crafted web content may lead to an unexpected process crash.
🎖@cveNotify
Apple Support
About the security content of iOS 26.1 and iPadOS 26.1 - Apple Support
This document describes the security content of iOS 26.1 and iPadOS 26.1.
🚨 CVE-2026-21441
urllib3 is an HTTP client library for Python. urllib3's streaming API is designed for the efficient handling of large HTTP responses by reading the content in chunks, rather than loading the entire response body into memory at once. urllib3 can perform decoding or decompression based on the HTTP `Content-Encoding` header (e.g., `gzip`, `deflate`, `br`, or `zstd`). When using the streaming API, the library decompresses only the necessary bytes, enabling partial content consumption. Starting in version 1.22 and prior to version 2.6.3, for HTTP redirect responses, the library would read the entire response body to drain the connection and decompress the content unnecessarily. This decompression occurred even before any read methods were called, and configured read limits did not restrict the amount of decompressed data. As a result, there was no safeguard against decompression bombs. A malicious server could exploit this to trigger excessive resource consumption on the client. Applications and libraries are affected when they stream content from untrusted sources by setting `preload_content=False` when they do not disable redirects. Users should upgrade to at least urllib3 v2.6.3, in which the library does not decode content of redirect responses when `preload_content=False`. If upgrading is not immediately possible, disable redirects by setting `redirect=False` for requests to untrusted source.
🎖@cveNotify
urllib3 is an HTTP client library for Python. urllib3's streaming API is designed for the efficient handling of large HTTP responses by reading the content in chunks, rather than loading the entire response body into memory at once. urllib3 can perform decoding or decompression based on the HTTP `Content-Encoding` header (e.g., `gzip`, `deflate`, `br`, or `zstd`). When using the streaming API, the library decompresses only the necessary bytes, enabling partial content consumption. Starting in version 1.22 and prior to version 2.6.3, for HTTP redirect responses, the library would read the entire response body to drain the connection and decompress the content unnecessarily. This decompression occurred even before any read methods were called, and configured read limits did not restrict the amount of decompressed data. As a result, there was no safeguard against decompression bombs. A malicious server could exploit this to trigger excessive resource consumption on the client. Applications and libraries are affected when they stream content from untrusted sources by setting `preload_content=False` when they do not disable redirects. Users should upgrade to at least urllib3 v2.6.3, in which the library does not decode content of redirect responses when `preload_content=False`. If upgrading is not immediately possible, disable redirects by setting `redirect=False` for requests to untrusted source.
🎖@cveNotify
GitHub
Merge commit from fork · urllib3/urllib3@8864ac4
* Stop decoding response content during redirects needlessly
* Rename the new query parameter
* Add a changelog entry
* Rename the new query parameter
* Add a changelog entry
🚨 CVE-2026-22029
React Router is a router for React. In @remix-run/router version prior to 1.23.2 and react-router 7.0.0 through 7.11.0, React Router (and Remix v1/v2) SPA open navigation redirects originating from loaders or actions in Framework Mode, Data Mode, or the unstable RSC modes can result in unsafe URLs causing unintended javascript execution on the client. This is only an issue if you are creating redirect paths from untrusted content or via an open redirect. There is no impact if Declarative Mode (<BrowserRouter>) is being used. This issue has been patched in @remix-run/router version 1.23.2 and react-router version 7.12.0.
🎖@cveNotify
React Router is a router for React. In @remix-run/router version prior to 1.23.2 and react-router 7.0.0 through 7.11.0, React Router (and Remix v1/v2) SPA open navigation redirects originating from loaders or actions in Framework Mode, Data Mode, or the unstable RSC modes can result in unsafe URLs causing unintended javascript execution on the client. This is only an issue if you are creating redirect paths from untrusted content or via an open redirect. There is no impact if Declarative Mode (<BrowserRouter>) is being used. This issue has been patched in @remix-run/router version 1.23.2 and react-router version 7.12.0.
🎖@cveNotify
GitHub
XSS via Open Redirects
React Router (and Remix v1/v2) SPA open navigation redirects originating from loaders or actions in [Framework Mode](https://reactrouter.com/start/modes#framework), [Data Mode](https://reactrouter....
🚨 CVE-2026-23490
pyasn1 is a generic ASN.1 library for Python. Prior to 0.6.2, a Denial-of-Service issue has been found that leads to memory exhaustion from malformed RELATIVE-OID with excessive continuation octets. This vulnerability is fixed in 0.6.2.
🎖@cveNotify
pyasn1 is a generic ASN.1 library for Python. Prior to 0.6.2, a Denial-of-Service issue has been found that leads to memory exhaustion from malformed RELATIVE-OID with excessive continuation octets. This vulnerability is fixed in 0.6.2.
🎖@cveNotify
GitHub
Merge commit from fork · pyasn1/pyasn1@3908f14
Add limit of 20 continuation octets per OID arc to prevent a potential memory
exhaustion from excessive continuation bytes input.
exhaustion from excessive continuation bytes input.
🚨 CVE-2025-13465
Lodash versions 4.0.0 through 4.17.22 are vulnerable to prototype pollution in the _.unset and _.omit functions. An attacker can pass crafted paths which cause Lodash to delete methods from global prototypes.
The issue permits deletion of properties but does not allow overwriting their original behavior.
This issue is patched on 4.17.23
🎖@cveNotify
Lodash versions 4.0.0 through 4.17.22 are vulnerable to prototype pollution in the _.unset and _.omit functions. An attacker can pass crafted paths which cause Lodash to delete methods from global prototypes.
The issue permits deletion of properties but does not allow overwriting their original behavior.
This issue is patched on 4.17.23
🎖@cveNotify
GitHub
Prototype Pollution Vulnerability in Lodash `_.unset` and `_.omit` functions
### Impact
Lodash versions 4.0.0 through 4.17.22 are vulnerable to prototype pollution in the `_.unset` and `_.omit` functions. An attacker can pass crafted paths which cause Lodash to delete me...
Lodash versions 4.0.0 through 4.17.22 are vulnerable to prototype pollution in the `_.unset` and `_.omit` functions. An attacker can pass crafted paths which cause Lodash to delete me...
🚨 CVE-2025-61726
The net/url package does not set a limit on the number of query parameters in a query. While the maximum size of query parameters in URLs is generally limited by the maximum request header size, the net/http.Request.ParseForm method can parse large URL-encoded forms. Parsing a large form containing many unique query parameters can cause excessive memory consumption.
🎖@cveNotify
The net/url package does not set a limit on the number of query parameters in a query. While the maximum size of query parameters in URLs is generally limited by the maximum request header size, the net/http.Request.ParseForm method can parse large URL-encoded forms. Parsing a large form containing many unique query parameters can cause excessive memory consumption.
🎖@cveNotify
🚨 CVE-2025-69873
ajv (Another JSON Schema Validator) before 8.18.0 is vulnerable to Regular Expression Denial of Service (ReDoS) when the $data option is enabled. The pattern keyword accepts runtime data via JSON Pointer syntax ($data reference), which is passed directly to the JavaScript RegExp() constructor without validation. An attacker can inject a malicious regex pattern (e.g., "^(a|a)*$") combined with crafted input to cause catastrophic backtracking. A 31-character payload causes approximately 44 seconds of CPU blocking, with each additional character doubling execution time. This enables complete denial of service with a single HTTP request against any API using ajv with $data: true for dynamic schema validation. This issue is also fixed in version 6.14.0.
🎖@cveNotify
ajv (Another JSON Schema Validator) before 8.18.0 is vulnerable to Regular Expression Denial of Service (ReDoS) when the $data option is enabled. The pattern keyword accepts runtime data via JSON Pointer syntax ($data reference), which is passed directly to the JavaScript RegExp() constructor without validation. An attacker can inject a malicious regex pattern (e.g., "^(a|a)*$") combined with crafted input to cause catastrophic backtracking. A 31-character payload causes approximately 44 seconds of CPU blocking, with each additional character doubling execution time. This enables complete denial of service with a single HTTP request against any API using ajv with $data: true for dynamic schema validation. This issue is also fixed in version 6.14.0.
🎖@cveNotify
GitHub
ethan-cve-disclosures/CVE-2025-69873-ajv-ReDoS.md at main · EthanKim88/ethan-cve-disclosures
Security vulnerability disclosures and advisories by Ethan Taebeom Kim (Cremit) - EthanKim88/ethan-cve-disclosures
🚨 CVE-2026-24708
An issue was discovered in OpenStack Nova before 30.2.2, 31 before 31.2.1, and 32 before 32.1.1. By writing a malicious QCOW header to a root or ephemeral disk and then triggering a resize, a user may convince Nova's Flat image backend to call qemu-img without a format restriction, resulting in an unsafe image resize operation that could destroy data on the host system. Only compute nodes using the Flat image backend (usually configured with use_cow_images=False) are affected.
🎖@cveNotify
An issue was discovered in OpenStack Nova before 30.2.2, 31 before 31.2.1, and 32 before 32.1.1. By writing a malicious QCOW header to a root or ephemeral disk and then triggering a resize, a user may convince Nova's Flat image backend to call qemu-img without a format restriction, resulting in an unsafe image resize operation that could destroy data on the host system. Only compute nodes using the Flat image backend (usually configured with use_cow_images=False) are affected.
🎖@cveNotify
Launchpad
Bug #2137507 “[OSSA-2026-002] Nova calls qemu-img without format...” : Bugs : OpenStack Compute (nova)
Nova still has an instance of unrestricted qemu image format detection in the instance resize path. This is vulnerable to to the same sorts of issues as CVE-2024-32498 (bug 2059809). The basic vulnerability is:
1. Nova configured with use_cow_images=False…
1. Nova configured with use_cow_images=False…
🚨 CVE-2026-25896
fast-xml-parser allows users to validate XML, parse XML to JS object, or build XML from JS object without C/C++ based libraries and no callback. From 4.1.3to before 5.3.5, a dot (.) in a DOCTYPE entity name is treated as a regex wildcard during entity replacement, allowing an attacker to shadow built-in XML entities (<, >, &, ", ') with arbitrary values. This bypasses entity encoding and leads to XSS when parsed output is rendered. This vulnerability is fixed in 5.3.5.
🎖@cveNotify
fast-xml-parser allows users to validate XML, parse XML to JS object, or build XML from JS object without C/C++ based libraries and no callback. From 4.1.3to before 5.3.5, a dot (.) in a DOCTYPE entity name is treated as a regex wildcard during entity replacement, allowing an attacker to shadow built-in XML entities (<, >, &, ", ') with arbitrary values. This bypasses entity encoding and leads to XSS when parsed output is rendered. This vulnerability is fixed in 5.3.5.
🎖@cveNotify
GitHub
fix: Escape regex char in entity name · NaturalIntelligence/fast-xml-parser@943ef0e
Validate XML, Parse XML and Build XML rapidly without C/C++ based libraries and no callback. - fix: Escape regex char in entity name · NaturalIntelligence/fast-xml-parser@943ef0e
🚨 CVE-2026-29063
Immutable.js provides many Persistent Immutable data structures. Prior to versions 3.8.3, 4.3.7, and 5.1.5, Prototype Pollution is possible in immutable via the mergeDeep(), mergeDeepWith(), merge(), Map.toJS(), and Map.toObject() APIs. This issue has been patched in versions 3.8.3, 4.3.7, and 5.1.5.
🎖@cveNotify
Immutable.js provides many Persistent Immutable data structures. Prior to versions 3.8.3, 4.3.7, and 5.1.5, Prototype Pollution is possible in immutable via the mergeDeep(), mergeDeepWith(), merge(), Map.toJS(), and Map.toObject() APIs. This issue has been patched in versions 3.8.3, 4.3.7, and 5.1.5.
🎖@cveNotify
GitHub
Release v3.8.3 · immutable-js/immutable-js
Fix Improperly Controlled Modification of Object Prototype Attributes ('Prototype Pollution') in immutable
🚨 CVE-2026-25679
url.Parse insufficiently validated the host/authority component and accepted some invalid URLs.
🎖@cveNotify
url.Parse insufficiently validated the host/authority component and accepted some invalid URLs.
🎖@cveNotify
🚨 CVE-2026-27137
When verifying a certificate chain which contains a certificate containing multiple email address constraints which share common local portions but different domain portions, these constraints will not be properly applied, and only the last constraint will be considered.
🎖@cveNotify
When verifying a certificate chain which contains a certificate containing multiple email address constraints which share common local portions but different domain portions, these constraints will not be properly applied, and only the last constraint will be considered.
🎖@cveNotify
🚨 CVE-2026-33186
gRPC-Go is the Go language implementation of gRPC. Versions prior to 1.79.3 have an authorization bypass resulting from improper input validation of the HTTP/2 `:path` pseudo-header. The gRPC-Go server was too lenient in its routing logic, accepting requests where the `:path` omitted the mandatory leading slash (e.g., `Service/Method` instead of `/Service/Method`). While the server successfully routed these requests to the correct handler, authorization interceptors (including the official `grpc/authz` package) evaluated the raw, non-canonical path string. Consequently, "deny" rules defined using canonical paths (starting with `/`) failed to match the incoming request, allowing it to bypass the policy if a fallback "allow" rule was present. This affects gRPC-Go servers that use path-based authorization interceptors, such as the official RBAC implementation in `google.golang.org/grpc/authz` or custom interceptors relying on `info.FullMethod` or `grpc.Method(ctx)`; AND that have a security policy contains specific "deny" rules for canonical paths but allows other requests by default (a fallback "allow" rule). The vulnerability is exploitable by an attacker who can send raw HTTP/2 frames with malformed `:path` headers directly to the gRPC server. The fix in version 1.79.3 ensures that any request with a `:path` that does not start with a leading slash is immediately rejected with a `codes.Unimplemented` error, preventing it from reaching authorization interceptors or handlers with a non-canonical path string. While upgrading is the most secure and recommended path, users can mitigate the vulnerability using one of the following methods: Use a validating interceptor (recommended mitigation); infrastructure-level normalization; and/or policy hardening.
🎖@cveNotify
gRPC-Go is the Go language implementation of gRPC. Versions prior to 1.79.3 have an authorization bypass resulting from improper input validation of the HTTP/2 `:path` pseudo-header. The gRPC-Go server was too lenient in its routing logic, accepting requests where the `:path` omitted the mandatory leading slash (e.g., `Service/Method` instead of `/Service/Method`). While the server successfully routed these requests to the correct handler, authorization interceptors (including the official `grpc/authz` package) evaluated the raw, non-canonical path string. Consequently, "deny" rules defined using canonical paths (starting with `/`) failed to match the incoming request, allowing it to bypass the policy if a fallback "allow" rule was present. This affects gRPC-Go servers that use path-based authorization interceptors, such as the official RBAC implementation in `google.golang.org/grpc/authz` or custom interceptors relying on `info.FullMethod` or `grpc.Method(ctx)`; AND that have a security policy contains specific "deny" rules for canonical paths but allows other requests by default (a fallback "allow" rule). The vulnerability is exploitable by an attacker who can send raw HTTP/2 frames with malformed `:path` headers directly to the gRPC server. The fix in version 1.79.3 ensures that any request with a `:path` that does not start with a leading slash is immediately rejected with a `codes.Unimplemented` error, preventing it from reaching authorization interceptors or handlers with a non-canonical path string. While upgrading is the most secure and recommended path, users can mitigate the vulnerability using one of the following methods: Use a validating interceptor (recommended mitigation); infrastructure-level normalization; and/or policy hardening.
🎖@cveNotify
GitHub
Authorization bypass via missing leading slash in :path
### Impact
_What kind of vulnerability is it? Who is impacted?_
It is an **Authorization Bypass** (CWE-285) resulting from **Improper Input Validation** (CWE-20) of the HTTP/2 `:path` pseudo-he...
_What kind of vulnerability is it? Who is impacted?_
It is an **Authorization Bypass** (CWE-285) resulting from **Improper Input Validation** (CWE-20) of the HTTP/2 `:path` pseudo-he...
🚨 CVE-2026-27889
NATS-Server is a High-Performance server for NATS.io, a cloud and edge native messaging system. Starting in version 2.2.0 and prior to versions 2.11.14 and 2.12.5, a missing sanity check on a WebSockets frame could trigger a server panic in the nats-server. This happens before authentication, and so is exposed to anyone who can connect to the websockets port. Versions 2.11.14 and 2.12.5 contains a fix. A workaround is available. The vulnerability only affects deployments which use WebSockets and which expose the network port to untrusted end-points. If one is able to do so, a defense in depth of restricting either of these will mitigate the attack.
🎖@cveNotify
NATS-Server is a High-Performance server for NATS.io, a cloud and edge native messaging system. Starting in version 2.2.0 and prior to versions 2.11.14 and 2.12.5, a missing sanity check on a WebSockets frame could trigger a server panic in the nats-server. This happens before authentication, and so is exposed to anyone who can connect to the websockets port. Versions 2.11.14 and 2.12.5 contains a fix. A workaround is available. The vulnerability only affects deployments which use WebSockets and which expose the network port to untrusted end-points. If one is able to do so, a defense in depth of restricting either of these will mitigate the attack.
🎖@cveNotify
🚨 CVE-2026-29785
NATS-Server is a High-Performance server for NATS.io, a cloud and edge native messaging system. Prior to versions 2.11.14 and 2.12.5, if the nats-server has the "leafnode" configuration enabled (not default), then anyone who can connect can crash the nats-server by triggering a panic. This happens pre-authentication and requires that compression be enabled (which it is, by default, when leafnodes are used). Versions 2.11.14 and 2.12.5 contain a fix. As a workaround, disable compression on the leafnode port.
🎖@cveNotify
NATS-Server is a High-Performance server for NATS.io, a cloud and edge native messaging system. Prior to versions 2.11.14 and 2.12.5, if the nats-server has the "leafnode" configuration enabled (not default), then anyone who can connect can crash the nats-server by triggering a panic. This happens pre-authentication and requires that compression be enabled (which it is, by default, when leafnodes are used). Versions 2.11.14 and 2.12.5 contain a fix. As a workaround, disable compression on the leafnode port.
🎖@cveNotify
🚨 CVE-2026-33216
NATS-Server is a High-Performance server for NATS.io, a cloud and edge native messaging system. Prior to versions 2.11.15 and 2.12.6, for MQTT deployments using usercodes/passwords: MQTT passwords are incorrectly classified as a non-authenticating identity statement (JWT) and exposed via monitoring endpoints. Versions 2.11.14 and 2.12.6 contain a fix. As a workaround, ensure monitoring end-points are adequately secured. Best practice remains to not expose the monitoring endpoint to the Internet or other untrusted network users.
🎖@cveNotify
NATS-Server is a High-Performance server for NATS.io, a cloud and edge native messaging system. Prior to versions 2.11.15 and 2.12.6, for MQTT deployments using usercodes/passwords: MQTT passwords are incorrectly classified as a non-authenticating identity statement (JWT) and exposed via monitoring endpoints. Versions 2.11.14 and 2.12.6 contain a fix. As a workaround, ensure monitoring end-points are adequately secured. Best practice remains to not expose the monitoring endpoint to the Internet or other untrusted network users.
🎖@cveNotify
🚨 CVE-2026-33217
NATS-Server is a High-Performance server for NATS.io, a cloud and edge native messaging system. Prior to versions 2.11.15 and 2.12.6, when using ACLs on message subjects, these ACLs were not applied in the `$MQTT.>` namespace, allowing MQTT clients to bypass ACL checks for MQTT subjects. Versions 2.11.15 and 2.12.6 contain a fix. No known workarounds are available.
🎖@cveNotify
NATS-Server is a High-Performance server for NATS.io, a cloud and edge native messaging system. Prior to versions 2.11.15 and 2.12.6, when using ACLs on message subjects, these ACLs were not applied in the `$MQTT.>` namespace, allowing MQTT clients to bypass ACL checks for MQTT subjects. Versions 2.11.15 and 2.12.6 contain a fix. No known workarounds are available.
🎖@cveNotify
🚨 CVE-2026-33219
NATS-Server is a High-Performance server for NATS.io, a cloud and edge native messaging system. Prior to versions 2.11.15 and 2.12.6, a malicious client which can connect to the WebSockets port can cause unbounded memory use in the nats-server before authentication; this requires sending a corresponding amount of data. This is a milder variant of CVE-2026-27571. That earlier issue was a compression bomb, this vulnerability is not. Attacks against this new issue thus require significant client bandwidth. Versions 2.11.15 and 2.12.6 contain a fix. As a workaround, disable websockets if not required for project deployment.
🎖@cveNotify
NATS-Server is a High-Performance server for NATS.io, a cloud and edge native messaging system. Prior to versions 2.11.15 and 2.12.6, a malicious client which can connect to the WebSockets port can cause unbounded memory use in the nats-server before authentication; this requires sending a corresponding amount of data. This is a milder variant of CVE-2026-27571. That earlier issue was a compression bomb, this vulnerability is not. Attacks against this new issue thus require significant client bandwidth. Versions 2.11.15 and 2.12.6 contain a fix. As a workaround, disable websockets if not required for project deployment.
🎖@cveNotify
🚨 CVE-2026-33247
NATS-Server is a High-Performance server for NATS.io, a cloud and edge native messaging system. Prior to versions 2.11.15 and 2.12.6, if a nats-server is run with static credentials for all clients provided via argv (the command-line), then those credentials are visible to any user who can see the monitoring port, if that too is enabled. The `/debug/vars` end-point contains an unredacted copy of argv. Versions 2.11.15 and 2.12.6 contain a fix. As a workaround, configure credentials inside a configuration file instead of via argv, and do not enable the monitoring port if using secrets in argv. Best practice remains to not expose the monitoring port to the Internet, or to untrusted network sources.
🎖@cveNotify
NATS-Server is a High-Performance server for NATS.io, a cloud and edge native messaging system. Prior to versions 2.11.15 and 2.12.6, if a nats-server is run with static credentials for all clients provided via argv (the command-line), then those credentials are visible to any user who can see the monitoring port, if that too is enabled. The `/debug/vars` end-point contains an unredacted copy of argv. Versions 2.11.15 and 2.12.6 contain a fix. As a workaround, configure credentials inside a configuration file instead of via argv, and do not enable the monitoring port if using secrets in argv. Best practice remains to not expose the monitoring port to the Internet, or to untrusted network sources.
🎖@cveNotify
🚨 CVE-2026-33487
goxmlsig provides XML Digital Signatures implemented in Go. Prior to version 1.6.0, the `validateSignature` function in `validate.go` goes through the references in the `SignedInfo` block to find one that matches the signed element's ID. In Go versions before 1.22, or when `go.mod` uses an older version, there is a loop variable capture issue. The code takes the address of the loop variable `_ref` instead of its value. As a result, if more than one reference matches the ID or if the loop logic is incorrect, the `ref` pointer will always end up pointing to the last element in the `SignedInfo.References` slice after the loop. goxmlsig version 1.6.0 contains a patch.
🎖@cveNotify
goxmlsig provides XML Digital Signatures implemented in Go. Prior to version 1.6.0, the `validateSignature` function in `validate.go` goes through the references in the `SignedInfo` block to find one that matches the signed element's ID. In Go versions before 1.22, or when `go.mod` uses an older version, there is a loop variable capture issue. The code takes the address of the loop variable `_ref` instead of its value. As a result, if more than one reference matches the ID or if the loop logic is incorrect, the `ref` pointer will always end up pointing to the last element in the `SignedInfo.References` slice after the loop. goxmlsig version 1.6.0 contains a patch.
🎖@cveNotify
GitHub
validateSignature Loop Variable Capture Signature Bypass in goxmldsig
### Details
The `validateSignature` function in `validate.go` goes through the references in the `SignedInfo` block to find one that matches the signed element's ID. In Go versions before 1....
The `validateSignature` function in `validate.go` goes through the references in the `SignedInfo` block to find one that matches the signed element's ID. In Go versions before 1....
🚨 CVE-2026-32285
The Delete function fails to properly validate offsets when processing malformed JSON input. This can lead to a negative slice index and a runtime panic, allowing a denial of service attack.
🎖@cveNotify
The Delete function fails to properly validate offsets when processing malformed JSON input. This can lead to a negative slice index and a runtime panic, allowing a denial of service attack.
🎖@cveNotify
GitHub
Panic in Delete() via slice bounds out of range [-1:] on malformed input (v1.1.1) · Issue #275 · buger/jsonparser
Summary github.com/buger/jsonparser v1.1.1 panics with a negative slice index in the Delete() function when given malformed JSON input. This is a denial-of-service vulnerability - any service that ...