🚨 CVE-2026-72693
`openvt -u` is intended to identify the owner of the current VT and then execute `login` as that user from a privileged context. In the documented `kbrequest`/init usage, the ownership test in `authenticate_user()` relies on `stat("/proc/<pid>/fd/0")`. `stat()` on `/proc/<pid>/fd/0` follows the symlink to the underlying TTY device node. As a result, `buf.st_uid` reflects the owner of the TTY node rather than the owner of the process holding the file descriptor. If the TTY owner returns to `root` or the getty owner after logout while an unprivileged process still has `fd 0` attached to that TTY, the check can incorrectly treat that process as belonging to the privileged console owner. Once that check succeeds, the `-u` path executes a passwordless login as the selected user. In the documented `kbrequest`/init deployment using `openvt -us`, this can result in passwordless `login -f root` on the spawned VT. This report establishes that privilege escalation path for that documented deployment; it does not claim equivalent reachability for deployments that do not use `openvt -u` from a privileged `kbrequest`/init path.

🎖@cveNotify

🚨 CVE-2026-68431
In the Linux kernel, the following vulnerability has been resolved:

ksmbd: validate minimum PDU size for transform requests

The receive path applies the minimum SMB2 PDU size check only when
ProtocolId is SMB2_PROTO_NUMBER. A packet carrying
SMB2_TRANSFORM_PROTO_NUM bypasses the check even when the negotiated
dialect does not provide transform handling.

On an SMB 2.1 connection, a short transform packet therefore reaches
init_smb2_rsp_hdr(), which interprets the request as a full SMB2 header
and reads beyond the request allocation. The copied fields can then be
returned to the unauthenticated client.

Compression transforms are converted to ordinary SMB2 messages before
protocol validation. After that conversion, validate ordinary SMB2
requests against SMB2_MIN_SUPPORTED_PDU_SIZE and require encryption
transform requests to contain both a transform header and an SMB2
header. This rejects truncated requests before work allocation.

🎖@cveNotify

🚨 CVE-2026-68432
In the Linux kernel, the following vulnerability has been resolved:

vxlan: require CAP_NET_ADMIN in the device netns for changelink

A tunnel changelink() operates on at most two netns, dev_net(dev) and
the sticky underlay netns vxlan->net. They differ once the device is
created in or moved to a netns other than the one the request runs in.
The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev),
so a caller privileged there but not in vxlan->net can rewrite a vxlan
device whose underlay lives in vxlan->net.

vxlan_changelink() validates and applies the new configuration against
vxlan->net (vxlan_config_validate(vxlan->net, ...)) and can reopen the
underlay socket in that netns, so the same reasoning as the tunnel
changelink series applies here.

Gate vxlan_changelink() with rtnl_dev_link_net_capable(), at the top of
the op before any attribute is parsed, matching ipgre_changelink() and
the rest of the "require CAP_NET_ADMIN in the device netns for
changelink" series.

Found by 0sec automated security-research tooling (https://0sec.ai).

🎖@cveNotify

🚨 CVE-2026-68433
In the Linux kernel, the following vulnerability has been resolved:

libceph: bound get_version reply decode to front len

handle_get_version_reply() uses msg->front_alloc_len as the decode
boundary for MON_GET_VERSION_REPLY. That is the size of the reused
reply buffer, not the number of bytes actually received.

A truncated reply can therefore pass ceph_decode_need() and decode the
second u64 from stale tail bytes left in the buffer by an earlier
message, causing an uninitialized memory read.

Use msg->front.iov_len as the receive-side decode boundary, matching
other libceph reply handlers and limiting decoding to the bytes that
were actually read from the wire.

🎖@cveNotify

🚨 CVE-2026-68440
In the Linux kernel, the following vulnerability has been resolved:

net: txgbe: fix heap overflow when reading module EEPROM

txgbe_read_eeprom_hostif() always copies round_up(length, 4) bytes
into the caller buffer, which ethtool allocates with exactly 'length'
bytes. A non-4-aligned length therefore causes an out-of-bounds write.
Copy only the remaining bytes on the final dword instead.

🎖@cveNotify

🚨 CVE-2026-68442
In the Linux kernel, the following vulnerability has been resolved:

btrfs: don't propagate EXTENT_FLAG_LOGGING to split extent maps

When btrfs_drop_extent_map_range() splits an extent map, the new split
maps inherit the original map's flags through a local 'flags' variable.
Commit f86f7a75e2fb ("btrfs: use the flags of an extent map to identify
the compression type") changed the EXTENT_FLAG_LOGGING clearing to
operate on em->flags instead of that local 'flags' copy, so a split of
an extent map that is currently being logged wrongly inherits
EXTENT_FLAG_LOGGING.

The flag is then never cleared on the split, and when it is freed while
still on the inode's modified_extents list (for example by the extent
map shrinker) it trips the WARN_ON(!list_empty(&em->list)) in
btrfs_free_extent_map() and leads to a use-after-free.

Clear EXTENT_FLAG_LOGGING from the local 'flags' copy used for the
splits and only clear EXTENT_FLAG_PINNED from em->flags, restoring the
behaviour prior to f86f7a75e2fb.

🎖@cveNotify

🚨 CVE-2026-68445
In the Linux kernel, the following vulnerability has been resolved:

drm/vc4: Prevent shader BO mappings from becoming writable

vc4_gem_object_mmap() rejects a writable mapping of a validated shader
BO, but leaves VM_MAYWRITE set. Userspace can map the BO read-only and
then turn it writable with mprotect().

Validated shader BOs must stay read-only: the validator checks the
instructions once and the GPU trusts them afterwards. A writable
mapping lets userspace rewrite the code after validation, bypassing the
validator.

Clear VM_MAYWRITE on the read-only path so the mapping cannot be
upgraded, as i915 already does for its read-only objects.

🎖@cveNotify

🚨 CVE-2026-68447
In the Linux kernel, the following vulnerability has been resolved:

drm/amdkfd: clamp v9 CRIU control stack checkpoint copy to BO size

CRIU checkpoint copies the MQD control stack using cp_hqd_cntl_stack_size
from hardware without bounding it to the allocated BO region. If the HW
field is larger than the queue's control stack allocation, memcpy reads
past the BO into adjacent GTT memory and can leak kernel data to userspace.

Store the page-aligned control stack BO size in mqd_manager and clamp
checkpoint copies and reported checkpoint sizes to
min(cp_hqd_cntl_stack_size, mm->ctl_stack_size). Apply the same bound
for multi-XCC v9.4.3 checkpoint layout.

(cherry picked from commit 6c2abd0ec09e86c6323010673766f76050e28aa3)

🎖@cveNotify

🚨 CVE-2026-68451
In the Linux kernel, the following vulnerability has been resolved:

s390/zcrypt: Validate length for CCA ECC private key requests

cca_ecc2protkey() derives the copy length for the CPRB parameter
block directly from the length field in the key token. Reject the
request early if the token length exceeds the available space in the
parameter block.

🎖@cveNotify

🚨 CVE-2026-68452
In the Linux kernel, the following vulnerability has been resolved:

s390/zcrypt: Validate length for CCA AES cipher key requests

cca_cipher2protkey() derives the copy length for the CPRB parameter
block directly from the length field in the key token. Reject the
request early if the token length exceeds the available space in the
parameter block.

🎖@cveNotify

🚨 CVE-2026-68453
In the Linux kernel, the following vulnerability has been resolved:

s390/zcrypt: Fix buffer over-read in cca_cipher2protkey

Add validation of both the actual key buffer size and token length
fields in all the cca_check_sec*token() functions. Additionally check
in cca_gencipherkey() for possible underflow with returned key size.

The CCA token structures contain user-controlled len fields that
were used in operations without proper validation against both the
actual buffer size and minimum token structure size. An attacker
could set this field larger than the actual buffer size, leading to
reading beyond buffer boundaries. This may result in a kernel crash or
exposure of memory via sending this as part of a request down to the
crypto card. Also an attacker could have used a very small len value
and thus enforce a buffer under-run which may produce similar effects
as a over-read.

So now a key must
- key buf length must be at least sizeof the token struct
- the key len field inside the token must fit into the range of
sizeof key token struct ... key buf length

🎖@cveNotify

🚨 CVE-2026-68454
In the Linux kernel, the following vulnerability has been resolved:

KVM: s390: pci: Fix handling of AIF enable without AISB

When a guest seeks to register IRQs without a summary bit specified,
ensure that the associated GAITE then stores 0 for the guest AISB
location instead of virt_to_phys(page_address(NULL)).

🎖@cveNotify

🚨 CVE-2026-19753
A vulnerability was detected in Model Context Protocol mcp-rdf-explorer 1.0.0. Affected is the function explore_url of the file src/mcp-rdf-explorer/server.py of the component MCP Server. Performing a manipulation of the argument url results in server-side request forgery. The attack may be initiated remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

🎖@cveNotify

🚨 CVE-2026-19756
A vulnerability has been found in Dromara lamp-cloud up to 5.10.0. This affects an unknown part of the file DefGenProjectController.java of the component Code Generator. Such manipulation of the argument outputDir/parent/projectPrefix leads to path traversal. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The project was informed of the problem early through an issue report but has not responded yet.

🎖@cveNotify

🚨 CVE-2026-7210
`xml.parsers.expat` and `xml.etree.ElementTree` use insufficient entropy for Expat hash-flooding protection, which allows a crafted XML document to trigger hash flooding.\r\n\r\nFully mitigating this vulnerability requires both updating libexpat to 2.8.0 or later and applying this patch.

🎖@cveNotify

🚨 CVE-2026-59691
A heap buffer overflow vulnerability was found in GStreamer's rfbsrc plugin. When a client connects to a malicious RFB/VNC server that advertises a 16bpp framebuffer and sends Hextile-encoded updates, the Hextile background fill path writes 32-bit pixel values into a buffer allocated for 16-bit pixels. This type mismatch causes an out-of-bounds heap write that can lead to denial of service (process crash) and potential memory corruption.

🎖@cveNotify

🚨 CVE-2026-59692
A stack buffer overflow vulnerability was found in GStreamer's DTLS plugin. During a DTLS handshake, the peer certificate Subject Distinguished Name is printed into a fixed-size 2048-byte stack buffer without bounds checking. A remote unauthenticated attacker can send a certificate with an oversized Subject DN that exceeds the buffer, causing a stack buffer overflow and process crash, resulting in denial of service.

🎖@cveNotify

🚨 CVE-2026-65400
An authentication issue was addressed with improved state management. This issue is fixed in macOS Sequoia 15.7.9, macOS Sonoma 14.8.9, macOS Tahoe 26.6.1. An attacker on the network may be able to authenticate to Screen Sharing without valid credentials.

🎖@cveNotify

🚨 CVE-2026-19757
A vulnerability was found in Dromara lamp-cloud up to 5.10.0. This vulnerability affects unknown code of the file FileAnyoneController.java of the component File-Upload Controller. Performing a manipulation of the argument bucket/bizType results in path traversal. The attack can be initiated remotely. The exploit has been made public and could be used. The project was informed of the problem early through an issue report but has not responded yet.

🎖@cveNotify

🚨 CVE-2026-19758
A vulnerability was determined in dromara lamp-cloud up to 5.10.0. This issue affects some unknown processing of the file FileChunkController.java of the component chunk-check endpoint. Executing a manipulation of the argument Name can lead to path traversal. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized. The project was informed of the problem early through an issue report but has not responded yet.

🎖@cveNotify

🚨 CVE-2026-19761
A vulnerability has been found in DTStack Taier 1.4.0. Affected is the function MultipartFile.getOriginalFilename of the file UploadController.java of the component Upload Controller. The manipulation of the argument File leads to path traversal. The attack may be initiated remotely. Upgrading to version 1.5.0 is able to address this issue. The identifier of the patch is 572773c4315e23e51e30115151cb091749a8d03e. It is advisable to upgrade the affected component.

🎖@cveNotify