🚨 CVE-2026-50544
NortheBridge/luminalshine is a Sunshine-compatible game stream host for Moonlight. Prior to version 26.05.0-rc4, a latent gap exists on a default install, the file at `src/platform/windows/misc.cpp` lives at `C:\ProgramData\LuminalShine\config\apps.json` and is created by the `SYSTEM` service. Under Windows' default `C:\ProgramData` inheritance, that gives `BUILTIN\Users` only Read+Execute — not writable — so the canonical EoP doesn't actually trigger on a vanilla install. Version 26.05.0-rc4 contains a patch for the issue. As a workaround, use default condition DACLs for `ProgramData`.

🎖@cveNotify

🚨 CVE-2026-2297
The import hook in CPython that handles legacy *.pyc files (SourcelessFileLoader) is incorrectly handled in FileLoader (a base class) and so does not use io.open_code() to read the .pyc files. sys.audit handlers for this audit event therefore do not fire.

🎖@cveNotify

🚨 CVE-2025-13462
The "tarfile" module would still apply normalization of AREGTYPE (\x00) blocks to DIRTYPE, even while processing a multi-block member such as GNUTYPE_LONGNAME or GNUTYPE_LONGLINK. This could result in a crafted tar archive being misinterpreted by the tarfile module compared to other implementations.

🎖@cveNotify

🚨 CVE-2026-3644
The fix for CVE-2026-0672, which rejected control characters in http.cookies.Morsel, was incomplete. The Morsel.update(), |= operator, and unpickling paths were not patched, allowing control characters to bypass input validation. Additionally, BaseCookie.js_output() lacked the output validation applied to BaseCookie.output().

🎖@cveNotify

🚨 CVE-2026-4224
When an Expat parser with a registered ElementDeclHandler parses an inline
document type definition containing a deeply nested content model a C stack
overflow occurs.

🎖@cveNotify

🚨 CVE-2026-4519
The webbrowser.open() API would accept leading dashes in the URL which
could be handled as command line options for certain web browsers. New
behavior rejects leading dashes. Users are recommended to sanitize URLs
prior to passing to webbrowser.open().

🎖@cveNotify

🚨 CVE-2026-1502
CR/LF bytes were not rejected by HTTP client proxy tunnel headers or host.

🎖@cveNotify

🚨 CVE-2026-6100
Use-after-free (UAF) was possible in the `lzma.LZMADecompressor`, `bz2.BZ2Decompressor`, and `gzip.GzipFile` when a memory allocation fails with a `MemoryError` and the decompression instance is re-used. This scenario can be triggered if the process is under memory pressure. The fix cleans up the dangling pointer in this specific error condition.

The vulnerability is only present if the program re-uses decompressor instances across multiple decompression calls even after a `MemoryError` is raised during decompression. Using the helper functions to one-shot decompress data such as `lzma.decompress()`, `bz2.decompress()`, `gzip.decompress()`, and `zlib.decompress()` are not affected as a new decompressor instance is used per call. If the decompressor instance is not re-used after an error condition, this usage is similarly not vulnerable.

🎖@cveNotify

🚨 CVE-2026-4786
Mitgation of CVE-2026-4519 was incomplete. If the URL contained "%action" the mitigation could be bypassed for certain browser types the "webbrowser.open()" API could have commands injected into the underlying shell. See CVE-2026-4519 for details.

🎖@cveNotify

🚨 CVE-2026-3298
The method "sock_recvfrom_into()" of "asyncio.ProacterEventLoop" (Windows only) was missing a boundary check for the data buffer when using nbytes parameter. This allowed for an out-of-bounds buffer write if data was larger than the buffer size. Non-Windows platforms are not affected.

🎖@cveNotify

🚨 CVE-2026-3087
If `shutil.unpack_archive()` is given a ZIP archive with an absolute Windows path containing a drive (`C:\\...`) then the archive will be extracted outside the target directory which is different than other operating systems. Only Windows is affected by this vulnerability.

🎖@cveNotify

🚨 CVE-2026-7210
`xml.parsers.expat` and `xml.etree.ElementTree` use insufficient entropy for Expat hash-flooding protection, which allows a crafted XML document to trigger hash flooding.\r\n\r\nFully mitigating this vulnerability requires both updating libexpat to 2.8.0 or later and applying this patch.

🎖@cveNotify

🚨 CVE-2026-8328
The ftpcp() function in Lib/ftplib.py was not updated when
CVE-2021-4189 was fixed. While makepasv() was patched to replace
server-supplied PASV host addresses with the actual peer address
(getpeername()[0]), ftpcp() still calls parse227() directly and passes
the raw attacker-controllable IP address and port to target.sendport(). This patch is related to CVE-2021-4189.

🎖@cveNotify

🚨 CVE-2026-3276
unicodedata.normalize() can take excessive CPU time when processing
specially crafted Unicode input containing long runs of combining characters
with alternating Canonical Combining Class values.
This affects all normalization forms.

🎖@cveNotify

🚨 CVE-2026-7774
tarfile.data_filter could be bypassed using crafted link entries, including symlinks with empty or directory-like names, to redirect later archive members outside the intended extraction directory. This allowed a malicious tar archive to cause tarfile.extractall() to write files outside the destination directory, subject to the permissions of the extracting process.

🎖@cveNotify

🚨 CVE-2026-9669
bz2.BZ2Decompressor objects could be reused after a decompression error. If an application caught the resulting OSError and retried with the same decompressor, crafted input could cause the decompressor to resume from an invalid internal state and perform out-of-bounds writes to a stack buffer. This could crash the process when processing untrusted data.

🎖@cveNotify

🚨 CVE-2026-12003
To allow builds of Python to be run from an in-tree layout (rather than
an installed file layout), the VPATH variable is defined at build time
and used to locate certain landmarks - specifically,
Modules/setup.local. When this landmark is found relative to VPATH
relative to the executable, Python assumes it is running in a source
tree and generates a different default sys.path. This code remains in
release builds, so that release-ready builds can be built in-tree.

On Windows, since builds are written to 'PCbuild/', the value of
VPATH is set to '..\..', which results in a landmark of
'..\..\Modules\setup.local'. This path is outside the install directory
of Python, and may have different permissions, potentially allowing a
low-privilege user to create the landmark and an alternative `Lib`
folder that will be discovered by an otherwise restricted install.

Such a setup occurs with the legacy default install location for all
users (in the now superseded EXE installer), due to how Windows allows
all users to create folders in the root directory of their OS drive.

Our recommended mitigation on Windows is to migrate away from the
legacy installer and use the new [Python install
manager](https://www.python.org/downloads/latest/pymanager/) to install
for the current user. Installs where the directory two levels above the
Python installation directory have equivalent permissions are unaffected
(in general, a per-user install cannot be modified at all by other
users, removing any escalation of privilege risk, and could be directly
modified by a privileged user, making the potential tampering
irrelevant). Alternative mitigations might include preemptively creating
and restricting access to a `Modules` directory. Be aware that only 3.13
and 3.14 will receive updated legacy installers - earlier fixes are only
provided as sources.

Platforms other than Windows allow VPATH to be overridden, but as they
don't usually use a separated directory in the build for binaries, are
unlikely to have a landmark reference outside of the install directory.

The landmark detection involving VPATH is a fallback for when a more
specific landmark - .\pybuilddir.txt - is absent, and was included for
compatibility. Future releases of Python will no longer include the
fallback, and so builds will need to generate or preserve the
pybuilddir.txt file in order to work in-tree. This landmark file has
been generated on Windows since 3.11, and on other platforms for longer.

🎖@cveNotify

🚨 CVE-2026-11940
tarfile.extractall() with the 'data' or 'tar'
filter could be bypassed by a crafted archive where a hardlink
references a symlink stored at a deeper name than the hardlink itself. 
The extraction fallback validated the symlink at it's archived location
but recreated it at the hardlink's shallower
path, letting a relative
target the filter judged contained escape the destination directory. 
This allowed a malicious tar archive to create a symlink pointing
outside the destination, enabling out-of-destination file reads or
writes. This was an incomplete fix of CVE-2025-4330.

🎖@cveNotify

🚨 CVE-2026-0864
When using the "configparser" module to write configuration files
containing multi-line text values with carriage return characters (\r) the
resulting file could be injected with unexpected keys and values if the
attacker controls the written value.

🎖@cveNotify

🚨 CVE-2026-11972
When using the "tarfile" module with a file opened in "streaming mode" (mode="r|") the tarfile module did not properly handle EOF, making archive parsing take exponentially longer.

🎖@cveNotify

🚨 CVE-2026-4360
In the Tarfile.extract() function, the filter parameter is not passed properly when extracting hardlinks. An affected system that extracts content from untrusted tar files could end up writing files with an unexpected uid/gid despite the user passing filter='data' to the extract() function.

🎖@cveNotify