🚨 CVE-2022-48979
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: fix array index out of bound error in DCN32 DML
[Why&How]
LinkCapacitySupport array is indexed with the number of voltage states and
not the number of max DPPs. Fix the error by changing the array
declaration to use the correct (larger) array size of total number of
voltage states.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: fix array index out of bound error in DCN32 DML
[Why&How]
LinkCapacitySupport array is indexed with the number of voltage states and
not the number of max DPPs. Fix the error by changing the array
declaration to use the correct (larger) array size of total number of
voltage states.
🎖@cveNotify
🚨 CVE-2022-49044
In the Linux kernel, the following vulnerability has been resolved:
dm integrity: fix memory corruption when tag_size is less than digest size
It is possible to set up dm-integrity in such a way that the
"tag_size" parameter is less than the actual digest size. In this
situation, a part of the digest beyond tag_size is ignored.
In this case, dm-integrity would write beyond the end of the
ic->recalc_tags array and corrupt memory. The corruption happened in
integrity_recalc->integrity_sector_checksum->crypto_shash_final.
Fix this corruption by increasing the tags array so that it has enough
padding at the end to accomodate the loop in integrity_recalc() being
able to write a full digest size for the last member of the tags
array.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
dm integrity: fix memory corruption when tag_size is less than digest size
It is possible to set up dm-integrity in such a way that the
"tag_size" parameter is less than the actual digest size. In this
situation, a part of the digest beyond tag_size is ignored.
In this case, dm-integrity would write beyond the end of the
ic->recalc_tags array and corrupt memory. The corruption happened in
integrity_recalc->integrity_sector_checksum->crypto_shash_final.
Fix this corruption by increasing the tags array so that it has enough
padding at the end to accomodate the loop in integrity_recalc() being
able to write a full digest size for the last member of the tags
array.
🎖@cveNotify
🚨 CVE-2022-49051
In the Linux kernel, the following vulnerability has been resolved:
net: usb: aqc111: Fix out-of-bounds accesses in RX fixup
aqc111_rx_fixup() contains several out-of-bounds accesses that can be
triggered by a malicious (or defective) USB device, in particular:
- The metadata array (desc_offset..desc_offset+2*pkt_count) can be out of bounds,
causing OOB reads and (on big-endian systems) OOB endianness flips.
- A packet can overlap the metadata array, causing a later OOB
endianness flip to corrupt data used by a cloned SKB that has already
been handed off into the network stack.
- A packet SKB can be constructed whose tail is far beyond its end,
causing out-of-bounds heap data to be considered part of the SKB's
data.
Found doing variant analysis. Tested it with another driver (ax88179_178a), since
I don't have a aqc111 device to test it, but the code looks very similar.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
net: usb: aqc111: Fix out-of-bounds accesses in RX fixup
aqc111_rx_fixup() contains several out-of-bounds accesses that can be
triggered by a malicious (or defective) USB device, in particular:
- The metadata array (desc_offset..desc_offset+2*pkt_count) can be out of bounds,
causing OOB reads and (on big-endian systems) OOB endianness flips.
- A packet can overlap the metadata array, causing a later OOB
endianness flip to corrupt data used by a cloned SKB that has already
been handed off into the network stack.
- A packet SKB can be constructed whose tail is far beyond its end,
causing out-of-bounds heap data to be considered part of the SKB's
data.
Found doing variant analysis. Tested it with another driver (ax88179_178a), since
I don't have a aqc111 device to test it, but the code looks very similar.
🎖@cveNotify
🚨 CVE-2022-49069
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix by adding FPU protection for dcn30_internal_validate_bw
[Why]
Below general protection fault observed when WebGL Aquarium is run for
longer duration. If drm debug logs are enabled and set to 0x1f then the
issue is observed within 10 minutes of run.
[ 100.717056] general protection fault, probably for non-canonical address 0x2d33302d32323032: 0000 [#1] PREEMPT SMP NOPTI
[ 100.727921] CPU: 3 PID: 1906 Comm: DrmThread Tainted: G W 5.15.30 #12 d726c6a2d6ebe5cf9223931cbca6892f916fe18b
[ 100.754419] RIP: 0010:CalculateSwathWidth+0x1f7/0x44f
[ 100.767109] Code: 00 00 00 f2 42 0f 11 04 f0 48 8b 85 88 00 00 00 f2 42 0f 10 04 f0 48 8b 85 98 00 00 00 f2 42 0f 11 04 f0 48 8b 45 10 0f 57 c0 <f3> 42 0f 2a 04 b0 0f 57 c9 f3 43 0f 2a 0c b4 e8 8c e2 f3 ff 48 8b
[ 100.781269] RSP: 0018:ffffa9230079eeb0 EFLAGS: 00010246
[ 100.812528] RAX: 2d33302d32323032 RBX: 0000000000000500 RCX: 0000000000000000
[ 100.819656] RDX: 0000000000000001 RSI: ffff99deb712c49c RDI: 0000000000000000
[ 100.826781] RBP: ffffa9230079ef50 R08: ffff99deb712460c R09: ffff99deb712462c
[ 100.833907] R10: ffff99deb7124940 R11: ffff99deb7124d70 R12: ffff99deb712ae44
[ 100.841033] R13: 0000000000000001 R14: 0000000000000000 R15: ffffa9230079f0a0
[ 100.848159] FS: 00007af121212640(0000) GS:ffff99deba780000(0000) knlGS:0000000000000000
[ 100.856240] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 100.861980] CR2: 0000209000fe1000 CR3: 000000011b18c000 CR4: 0000000000350ee0
[ 100.869106] Call Trace:
[ 100.871555] <TASK>
[ 100.873655] ? asm_sysvec_reschedule_ipi+0x12/0x20
[ 100.878449] CalculateSwathAndDETConfiguration+0x1a3/0x6dd
[ 100.883937] dml31_ModeSupportAndSystemConfigurationFull+0x2ce4/0x76da
[ 100.890467] ? kallsyms_lookup_buildid+0xc8/0x163
[ 100.895173] ? kallsyms_lookup_buildid+0xc8/0x163
[ 100.899874] ? __sprint_symbol+0x80/0x135
[ 100.903883] ? dm_update_plane_state+0x3f9/0x4d2
[ 100.908500] ? symbol_string+0xb7/0xde
[ 100.912250] ? number+0x145/0x29b
[ 100.915566] ? vsnprintf+0x341/0x5ff
[ 100.919141] ? desc_read_finalized_seq+0x39/0x87
[ 100.923755] ? update_load_avg+0x1b9/0x607
[ 100.927849] ? compute_mst_dsc_configs_for_state+0x7d/0xd5b
[ 100.933416] ? fetch_pipe_params+0xa4d/0xd0c
[ 100.937686] ? dc_fpu_end+0x3d/0xa8
[ 100.941175] dml_get_voltage_level+0x16b/0x180
[ 100.945619] dcn30_internal_validate_bw+0x10e/0x89b
[ 100.950495] ? dcn31_validate_bandwidth+0x68/0x1fc
[ 100.955285] ? resource_build_scaling_params+0x98b/0xb8c
[ 100.960595] ? dcn31_validate_bandwidth+0x68/0x1fc
[ 100.965384] dcn31_validate_bandwidth+0x9a/0x1fc
[ 100.970001] dc_validate_global_state+0x238/0x295
[ 100.974703] amdgpu_dm_atomic_check+0x9c1/0xbce
[ 100.979235] ? _printk+0x59/0x73
[ 100.982467] drm_atomic_check_only+0x403/0x78b
[ 100.986912] drm_mode_atomic_ioctl+0x49b/0x546
[ 100.991358] ? drm_ioctl+0x1c1/0x3b3
[ 100.994936] ? drm_atomic_set_property+0x92a/0x92a
[ 100.999725] drm_ioctl_kernel+0xdc/0x149
[ 101.003648] drm_ioctl+0x27f/0x3b3
[ 101.007051] ? drm_atomic_set_property+0x92a/0x92a
[ 101.011842] amdgpu_drm_ioctl+0x49/0x7d
[ 101.015679] __se_sys_ioctl+0x7c/0xb8
[ 101.015685] do_syscall_64+0x5f/0xb8
[ 101.015690] ? __irq_exit_rcu+0x34/0x96
[How]
It calles populate_dml_pipes which uses doubles to initialize.
Adding FPU protection avoids context switch and probable loss of vba context
as there is potential contention while drm debug logs are enabled.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix by adding FPU protection for dcn30_internal_validate_bw
[Why]
Below general protection fault observed when WebGL Aquarium is run for
longer duration. If drm debug logs are enabled and set to 0x1f then the
issue is observed within 10 minutes of run.
[ 100.717056] general protection fault, probably for non-canonical address 0x2d33302d32323032: 0000 [#1] PREEMPT SMP NOPTI
[ 100.727921] CPU: 3 PID: 1906 Comm: DrmThread Tainted: G W 5.15.30 #12 d726c6a2d6ebe5cf9223931cbca6892f916fe18b
[ 100.754419] RIP: 0010:CalculateSwathWidth+0x1f7/0x44f
[ 100.767109] Code: 00 00 00 f2 42 0f 11 04 f0 48 8b 85 88 00 00 00 f2 42 0f 10 04 f0 48 8b 85 98 00 00 00 f2 42 0f 11 04 f0 48 8b 45 10 0f 57 c0 <f3> 42 0f 2a 04 b0 0f 57 c9 f3 43 0f 2a 0c b4 e8 8c e2 f3 ff 48 8b
[ 100.781269] RSP: 0018:ffffa9230079eeb0 EFLAGS: 00010246
[ 100.812528] RAX: 2d33302d32323032 RBX: 0000000000000500 RCX: 0000000000000000
[ 100.819656] RDX: 0000000000000001 RSI: ffff99deb712c49c RDI: 0000000000000000
[ 100.826781] RBP: ffffa9230079ef50 R08: ffff99deb712460c R09: ffff99deb712462c
[ 100.833907] R10: ffff99deb7124940 R11: ffff99deb7124d70 R12: ffff99deb712ae44
[ 100.841033] R13: 0000000000000001 R14: 0000000000000000 R15: ffffa9230079f0a0
[ 100.848159] FS: 00007af121212640(0000) GS:ffff99deba780000(0000) knlGS:0000000000000000
[ 100.856240] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 100.861980] CR2: 0000209000fe1000 CR3: 000000011b18c000 CR4: 0000000000350ee0
[ 100.869106] Call Trace:
[ 100.871555] <TASK>
[ 100.873655] ? asm_sysvec_reschedule_ipi+0x12/0x20
[ 100.878449] CalculateSwathAndDETConfiguration+0x1a3/0x6dd
[ 100.883937] dml31_ModeSupportAndSystemConfigurationFull+0x2ce4/0x76da
[ 100.890467] ? kallsyms_lookup_buildid+0xc8/0x163
[ 100.895173] ? kallsyms_lookup_buildid+0xc8/0x163
[ 100.899874] ? __sprint_symbol+0x80/0x135
[ 100.903883] ? dm_update_plane_state+0x3f9/0x4d2
[ 100.908500] ? symbol_string+0xb7/0xde
[ 100.912250] ? number+0x145/0x29b
[ 100.915566] ? vsnprintf+0x341/0x5ff
[ 100.919141] ? desc_read_finalized_seq+0x39/0x87
[ 100.923755] ? update_load_avg+0x1b9/0x607
[ 100.927849] ? compute_mst_dsc_configs_for_state+0x7d/0xd5b
[ 100.933416] ? fetch_pipe_params+0xa4d/0xd0c
[ 100.937686] ? dc_fpu_end+0x3d/0xa8
[ 100.941175] dml_get_voltage_level+0x16b/0x180
[ 100.945619] dcn30_internal_validate_bw+0x10e/0x89b
[ 100.950495] ? dcn31_validate_bandwidth+0x68/0x1fc
[ 100.955285] ? resource_build_scaling_params+0x98b/0xb8c
[ 100.960595] ? dcn31_validate_bandwidth+0x68/0x1fc
[ 100.965384] dcn31_validate_bandwidth+0x9a/0x1fc
[ 100.970001] dc_validate_global_state+0x238/0x295
[ 100.974703] amdgpu_dm_atomic_check+0x9c1/0xbce
[ 100.979235] ? _printk+0x59/0x73
[ 100.982467] drm_atomic_check_only+0x403/0x78b
[ 100.986912] drm_mode_atomic_ioctl+0x49b/0x546
[ 100.991358] ? drm_ioctl+0x1c1/0x3b3
[ 100.994936] ? drm_atomic_set_property+0x92a/0x92a
[ 100.999725] drm_ioctl_kernel+0xdc/0x149
[ 101.003648] drm_ioctl+0x27f/0x3b3
[ 101.007051] ? drm_atomic_set_property+0x92a/0x92a
[ 101.011842] amdgpu_drm_ioctl+0x49/0x7d
[ 101.015679] __se_sys_ioctl+0x7c/0xb8
[ 101.015685] do_syscall_64+0x5f/0xb8
[ 101.015690] ? __irq_exit_rcu+0x34/0x96
[How]
It calles populate_dml_pipes which uses doubles to initialize.
Adding FPU protection avoids context switch and probable loss of vba context
as there is potential contention while drm debug logs are enabled.
🎖@cveNotify
🚨 CVE-2022-49102
In the Linux kernel, the following vulnerability has been resolved:
habanalabs: fix possible memory leak in MMU DR fini
This patch fixes what seems to be copy paste error.
We will have a memory leak if the host-resident shadow is NULL (which
will likely happen as the DR and HR are not dependent).
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
habanalabs: fix possible memory leak in MMU DR fini
This patch fixes what seems to be copy paste error.
We will have a memory leak if the host-resident shadow is NULL (which
will likely happen as the DR and HR are not dependent).
🎖@cveNotify
🚨 CVE-2022-49104
In the Linux kernel, the following vulnerability has been resolved:
staging: vchiq_core: handle NULL result of find_service_by_handle
In case of an invalid handle the function find_servive_by_handle
returns NULL. So take care of this and avoid a NULL pointer dereference.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
staging: vchiq_core: handle NULL result of find_service_by_handle
In case of an invalid handle the function find_servive_by_handle
returns NULL. So take care of this and avoid a NULL pointer dereference.
🎖@cveNotify
🚨 CVE-2022-49105
In the Linux kernel, the following vulnerability has been resolved:
staging: wfx: fix an error handling in wfx_init_common()
One error handler of wfx_init_common() return without calling
ieee80211_free_hw(hw), which may result in memory leak. And I add
one err label to unify the error handler, which is useful for the
subsequent changes.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
staging: wfx: fix an error handling in wfx_init_common()
One error handler of wfx_init_common() return without calling
ieee80211_free_hw(hw), which may result in memory leak. And I add
one err label to unify the error handler, which is useful for the
subsequent changes.
🎖@cveNotify
🚨 CVE-2022-49107
In the Linux kernel, the following vulnerability has been resolved:
ceph: fix memory leak in ceph_readdir when note_last_dentry returns error
Reset the last_readdir at the same time, and add a comment explaining
why we don't free last_readdir when dir_emit returns false.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
ceph: fix memory leak in ceph_readdir when note_last_dentry returns error
Reset the last_readdir at the same time, and add a comment explaining
why we don't free last_readdir when dir_emit returns false.
🎖@cveNotify
🚨 CVE-2022-49109
In the Linux kernel, the following vulnerability has been resolved:
ceph: fix inode reference leakage in ceph_get_snapdir()
The ceph_get_inode() will search for or insert a new inode into the
hash for the given vino, and return a reference to it. If new is
non-NULL, its reference is consumed.
We should release the reference when in error handing cases.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
ceph: fix inode reference leakage in ceph_get_snapdir()
The ceph_get_inode() will search for or insert a new inode into the
hash for the given vino, and return a reference to it. If new is
non-NULL, its reference is consumed.
We should release the reference when in error handing cases.
🎖@cveNotify
🚨 CVE-2022-49112
In the Linux kernel, the following vulnerability has been resolved:
mt76: fix monitor mode crash with sdio driver
mt7921s driver may receive frames with fragment buffers. If there is a
CTS packet received in monitor mode, the payload is 10 bytes only and
need 6 bytes header padding after RXD buffer. However, only RXD in the
first linear buffer, if we pull buffer size RXD-size+6 bytes with
skb_pull(), that would trigger "BUG_ON(skb->len < skb->data_len)" in
__skb_pull().
To avoid the nonlinear buffer issue, enlarge the RXD size from 128 to
256 to make sure all MCU operation in linear buffer.
[ 52.007562] kernel BUG at include/linux/skbuff.h:2313!
[ 52.007578] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[ 52.007987] pc : skb_pull+0x48/0x4c
[ 52.008015] lr : mt7921_queue_rx_skb+0x494/0x890 [mt7921_common]
[ 52.008361] Call trace:
[ 52.008377] skb_pull+0x48/0x4c
[ 52.008400] mt76s_net_worker+0x134/0x1b0 [mt76_sdio 35339a92c6eb7d4bbcc806a1d22f56365565135c]
[ 52.008431] __mt76_worker_fn+0xe8/0x170 [mt76 ef716597d11a77150bc07e3fdd68eeb0f9b56917]
[ 52.008449] kthread+0x148/0x3ac
[ 52.008466] ret_from_fork+0x10/0x30
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
mt76: fix monitor mode crash with sdio driver
mt7921s driver may receive frames with fragment buffers. If there is a
CTS packet received in monitor mode, the payload is 10 bytes only and
need 6 bytes header padding after RXD buffer. However, only RXD in the
first linear buffer, if we pull buffer size RXD-size+6 bytes with
skb_pull(), that would trigger "BUG_ON(skb->len < skb->data_len)" in
__skb_pull().
To avoid the nonlinear buffer issue, enlarge the RXD size from 128 to
256 to make sure all MCU operation in linear buffer.
[ 52.007562] kernel BUG at include/linux/skbuff.h:2313!
[ 52.007578] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[ 52.007987] pc : skb_pull+0x48/0x4c
[ 52.008015] lr : mt7921_queue_rx_skb+0x494/0x890 [mt7921_common]
[ 52.008361] Call trace:
[ 52.008377] skb_pull+0x48/0x4c
[ 52.008400] mt76s_net_worker+0x134/0x1b0 [mt76_sdio 35339a92c6eb7d4bbcc806a1d22f56365565135c]
[ 52.008431] __mt76_worker_fn+0xe8/0x170 [mt76 ef716597d11a77150bc07e3fdd68eeb0f9b56917]
[ 52.008449] kthread+0x148/0x3ac
[ 52.008466] ret_from_fork+0x10/0x30
🎖@cveNotify
🚨 CVE-2022-49118
In the Linux kernel, the following vulnerability has been resolved:
scsi: hisi_sas: Free irq vectors in order for v3 HW
If the driver probe fails to request the channel IRQ or fatal IRQ, the
driver will free the IRQ vectors before freeing the IRQs in free_irq(),
and this will cause a kernel BUG like this:
------------[ cut here ]------------
kernel BUG at drivers/pci/msi.c:369!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
Call trace:
free_msi_irqs+0x118/0x13c
pci_disable_msi+0xfc/0x120
pci_free_irq_vectors+0x24/0x3c
hisi_sas_v3_probe+0x360/0x9d0 [hisi_sas_v3_hw]
local_pci_probe+0x44/0xb0
work_for_cpu_fn+0x20/0x34
process_one_work+0x1d0/0x340
worker_thread+0x2e0/0x460
kthread+0x180/0x190
ret_from_fork+0x10/0x20
---[ end trace b88990335b610c11 ]---
So we use devm_add_action() to control the order in which we free the
vectors.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
scsi: hisi_sas: Free irq vectors in order for v3 HW
If the driver probe fails to request the channel IRQ or fatal IRQ, the
driver will free the IRQ vectors before freeing the IRQs in free_irq(),
and this will cause a kernel BUG like this:
------------[ cut here ]------------
kernel BUG at drivers/pci/msi.c:369!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
Call trace:
free_msi_irqs+0x118/0x13c
pci_disable_msi+0xfc/0x120
pci_free_irq_vectors+0x24/0x3c
hisi_sas_v3_probe+0x360/0x9d0 [hisi_sas_v3_hw]
local_pci_probe+0x44/0xb0
work_for_cpu_fn+0x20/0x34
process_one_work+0x1d0/0x340
worker_thread+0x2e0/0x460
kthread+0x180/0x190
ret_from_fork+0x10/0x20
---[ end trace b88990335b610c11 ]---
So we use devm_add_action() to control the order in which we free the
vectors.
🎖@cveNotify
🚨 CVE-2022-49123
In the Linux kernel, the following vulnerability has been resolved:
ath11k: Fix frames flush failure caused by deadlock
We are seeing below warnings:
kernel: [25393.301506] ath11k_pci 0000:01:00.0: failed to flush mgmt transmit queue 0
kernel: [25398.421509] ath11k_pci 0000:01:00.0: failed to flush mgmt transmit queue 0
kernel: [25398.421831] ath11k_pci 0000:01:00.0: dropping mgmt frame for vdev 0, is_started 0
this means ath11k fails to flush mgmt. frames because wmi_mgmt_tx_work
has no chance to run in 5 seconds.
By setting /proc/sys/kernel/hung_task_timeout_secs to 20 and increasing
ATH11K_FLUSH_TIMEOUT to 50 we get below warnings:
kernel: [ 120.763160] INFO: task wpa_supplicant:924 blocked for more than 20 seconds.
kernel: [ 120.763169] Not tainted 5.10.90 #12
kernel: [ 120.763177] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
kernel: [ 120.763186] task:wpa_supplicant state:D stack: 0 pid: 924 ppid: 1 flags:0x000043a0
kernel: [ 120.763201] Call Trace:
kernel: [ 120.763214] __schedule+0x785/0x12fa
kernel: [ 120.763224] ? lockdep_hardirqs_on_prepare+0xe2/0x1bb
kernel: [ 120.763242] schedule+0x7e/0xa1
kernel: [ 120.763253] schedule_timeout+0x98/0xfe
kernel: [ 120.763266] ? run_local_timers+0x4a/0x4a
kernel: [ 120.763291] ath11k_mac_flush_tx_complete+0x197/0x2b1 [ath11k 13c3a9bf37790f4ac8103b3decf7ab4008ac314a]
kernel: [ 120.763306] ? init_wait_entry+0x2e/0x2e
kernel: [ 120.763343] __ieee80211_flush_queues+0x167/0x21f [mac80211 335da900954f1c5ea7f1613d92088ce83342042c]
kernel: [ 120.763378] __ieee80211_recalc_idle+0x105/0x125 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c]
kernel: [ 120.763411] ieee80211_recalc_idle+0x14/0x27 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c]
kernel: [ 120.763441] ieee80211_free_chanctx+0x77/0xa2 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c]
kernel: [ 120.763473] __ieee80211_vif_release_channel+0x100/0x131 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c]
kernel: [ 120.763540] ieee80211_vif_release_channel+0x66/0x81 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c]
kernel: [ 120.763572] ieee80211_destroy_auth_data+0xa3/0xe6 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c]
kernel: [ 120.763612] ieee80211_mgd_deauth+0x178/0x29b [mac80211 335da900954f1c5ea7f1613d92088ce83342042c]
kernel: [ 120.763654] cfg80211_mlme_deauth+0x1a8/0x22c [cfg80211 8945aa5bc2af5f6972336665d8ad6f9c191ad5be]
kernel: [ 120.763697] nl80211_deauthenticate+0xfa/0x123 [cfg80211 8945aa5bc2af5f6972336665d8ad6f9c191ad5be]
kernel: [ 120.763715] genl_rcv_msg+0x392/0x3c2
kernel: [ 120.763750] ? nl80211_associate+0x432/0x432 [cfg80211 8945aa5bc2af5f6972336665d8ad6f9c191ad5be]
kernel: [ 120.763782] ? nl80211_associate+0x432/0x432 [cfg80211 8945aa5bc2af5f6972336665d8ad6f9c191ad5be]
kernel: [ 120.763802] ? genl_rcv+0x36/0x36
kernel: [ 120.763814] netlink_rcv_skb+0x89/0xf7
kernel: [ 120.763829] genl_rcv+0x28/0x36
kernel: [ 120.763840] netlink_unicast+0x179/0x24b
kernel: [ 120.763854] netlink_sendmsg+0x393/0x401
kernel: [ 120.763872] sock_sendmsg+0x72/0x76
kernel: [ 120.763886] ____sys_sendmsg+0x170/0x1e6
kernel: [ 120.763897] ? copy_msghdr_from_user+0x7a/0xa2
kernel: [ 120.763914] ___sys_sendmsg+0x95/0xd1
kernel: [ 120.763940] __sys_sendmsg+0x85/0xbf
kernel: [ 120.763956] do_syscall_64+0x43/0x55
kernel: [ 120.763966] entry_SYSCALL_64_after_hwframe+0x44/0xa9
kernel: [ 120.763977] RIP: 0033:0x79089f3fcc83
kernel: [ 120.763986] RSP: 002b:00007ffe604f0508 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
kernel: [ 120.763997] RAX: ffffffffffffffda RBX: 000059b40e987690 RCX: 000079089f3fcc83
kernel: [ 120.764006] RDX: 0000000000000000 RSI: 00007ffe604f0558 RDI: 0000000000000009
kernel: [ 120.764014] RBP: 00007ffe604f0540 R08: 0000000000000004 R09: 0000000000400000
kernel: [ 120.764023] R10: 00007ffe604f0638 R11: 0000000000000246 R12: 000059b40ea04980
kernel: [ 120.764032] R13: 00007ffe604
---truncated---
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
ath11k: Fix frames flush failure caused by deadlock
We are seeing below warnings:
kernel: [25393.301506] ath11k_pci 0000:01:00.0: failed to flush mgmt transmit queue 0
kernel: [25398.421509] ath11k_pci 0000:01:00.0: failed to flush mgmt transmit queue 0
kernel: [25398.421831] ath11k_pci 0000:01:00.0: dropping mgmt frame for vdev 0, is_started 0
this means ath11k fails to flush mgmt. frames because wmi_mgmt_tx_work
has no chance to run in 5 seconds.
By setting /proc/sys/kernel/hung_task_timeout_secs to 20 and increasing
ATH11K_FLUSH_TIMEOUT to 50 we get below warnings:
kernel: [ 120.763160] INFO: task wpa_supplicant:924 blocked for more than 20 seconds.
kernel: [ 120.763169] Not tainted 5.10.90 #12
kernel: [ 120.763177] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
kernel: [ 120.763186] task:wpa_supplicant state:D stack: 0 pid: 924 ppid: 1 flags:0x000043a0
kernel: [ 120.763201] Call Trace:
kernel: [ 120.763214] __schedule+0x785/0x12fa
kernel: [ 120.763224] ? lockdep_hardirqs_on_prepare+0xe2/0x1bb
kernel: [ 120.763242] schedule+0x7e/0xa1
kernel: [ 120.763253] schedule_timeout+0x98/0xfe
kernel: [ 120.763266] ? run_local_timers+0x4a/0x4a
kernel: [ 120.763291] ath11k_mac_flush_tx_complete+0x197/0x2b1 [ath11k 13c3a9bf37790f4ac8103b3decf7ab4008ac314a]
kernel: [ 120.763306] ? init_wait_entry+0x2e/0x2e
kernel: [ 120.763343] __ieee80211_flush_queues+0x167/0x21f [mac80211 335da900954f1c5ea7f1613d92088ce83342042c]
kernel: [ 120.763378] __ieee80211_recalc_idle+0x105/0x125 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c]
kernel: [ 120.763411] ieee80211_recalc_idle+0x14/0x27 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c]
kernel: [ 120.763441] ieee80211_free_chanctx+0x77/0xa2 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c]
kernel: [ 120.763473] __ieee80211_vif_release_channel+0x100/0x131 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c]
kernel: [ 120.763540] ieee80211_vif_release_channel+0x66/0x81 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c]
kernel: [ 120.763572] ieee80211_destroy_auth_data+0xa3/0xe6 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c]
kernel: [ 120.763612] ieee80211_mgd_deauth+0x178/0x29b [mac80211 335da900954f1c5ea7f1613d92088ce83342042c]
kernel: [ 120.763654] cfg80211_mlme_deauth+0x1a8/0x22c [cfg80211 8945aa5bc2af5f6972336665d8ad6f9c191ad5be]
kernel: [ 120.763697] nl80211_deauthenticate+0xfa/0x123 [cfg80211 8945aa5bc2af5f6972336665d8ad6f9c191ad5be]
kernel: [ 120.763715] genl_rcv_msg+0x392/0x3c2
kernel: [ 120.763750] ? nl80211_associate+0x432/0x432 [cfg80211 8945aa5bc2af5f6972336665d8ad6f9c191ad5be]
kernel: [ 120.763782] ? nl80211_associate+0x432/0x432 [cfg80211 8945aa5bc2af5f6972336665d8ad6f9c191ad5be]
kernel: [ 120.763802] ? genl_rcv+0x36/0x36
kernel: [ 120.763814] netlink_rcv_skb+0x89/0xf7
kernel: [ 120.763829] genl_rcv+0x28/0x36
kernel: [ 120.763840] netlink_unicast+0x179/0x24b
kernel: [ 120.763854] netlink_sendmsg+0x393/0x401
kernel: [ 120.763872] sock_sendmsg+0x72/0x76
kernel: [ 120.763886] ____sys_sendmsg+0x170/0x1e6
kernel: [ 120.763897] ? copy_msghdr_from_user+0x7a/0xa2
kernel: [ 120.763914] ___sys_sendmsg+0x95/0xd1
kernel: [ 120.763940] __sys_sendmsg+0x85/0xbf
kernel: [ 120.763956] do_syscall_64+0x43/0x55
kernel: [ 120.763966] entry_SYSCALL_64_after_hwframe+0x44/0xa9
kernel: [ 120.763977] RIP: 0033:0x79089f3fcc83
kernel: [ 120.763986] RSP: 002b:00007ffe604f0508 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
kernel: [ 120.763997] RAX: ffffffffffffffda RBX: 000059b40e987690 RCX: 000079089f3fcc83
kernel: [ 120.764006] RDX: 0000000000000000 RSI: 00007ffe604f0558 RDI: 0000000000000009
kernel: [ 120.764014] RBP: 00007ffe604f0540 R08: 0000000000000004 R09: 0000000000400000
kernel: [ 120.764023] R10: 00007ffe604f0638 R11: 0000000000000246 R12: 000059b40ea04980
kernel: [ 120.764032] R13: 00007ffe604
---truncated---
🎖@cveNotify
🚨 CVE-2022-49126
In the Linux kernel, the following vulnerability has been resolved:
scsi: mpi3mr: Fix memory leaks
Fix memory leaks related to operational reply queue's memory segments which
are not getting freed while unloading the driver.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
scsi: mpi3mr: Fix memory leaks
Fix memory leaks related to operational reply queue's memory segments which
are not getting freed while unloading the driver.
🎖@cveNotify
🚨 CVE-2022-49129
In the Linux kernel, the following vulnerability has been resolved:
mt76: mt7921: fix crash when startup fails.
If the nic fails to start, it is possible that the
reset_work has already been scheduled. Ensure the
work item is canceled so we do not have use-after-free
crash in case cleanup is called before the work item
is executed.
This fixes crash on my x86_64 apu2 when mt7921k radio
fails to work. Radio still fails, but OS does not
crash.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
mt76: mt7921: fix crash when startup fails.
If the nic fails to start, it is possible that the
reset_work has already been scheduled. Ensure the
work item is canceled so we do not have use-after-free
crash in case cleanup is called before the work item
is executed.
This fixes crash on my x86_64 apu2 when mt7921k radio
fails to work. Radio still fails, but OS does not
crash.
🎖@cveNotify
🚨 CVE-2022-49130
In the Linux kernel, the following vulnerability has been resolved:
ath11k: mhi: use mhi_sync_power_up()
If amss.bin was missing ath11k would crash during 'rmmod ath11k_pci'. The
reason for that was that we were using mhi_async_power_up() which does not
check any errors. But mhi_sync_power_up() on the other hand does check for
errors so let's use that to fix the crash.
I was not able to find a reason why an async version was used.
ath11k_mhi_start() (which enables state ATH11K_MHI_POWER_ON) is called from
ath11k_hif_power_up(), which can sleep. So sync version should be safe to use
here.
[ 145.569731] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN PTI
[ 145.569789] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
[ 145.569843] CPU: 2 PID: 1628 Comm: rmmod Kdump: loaded Tainted: G W 5.16.0-wt-ath+ #567
[ 145.569898] Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0067.2021.0528.1339 05/28/2021
[ 145.569956] RIP: 0010:ath11k_hal_srng_access_begin+0xb5/0x2b0 [ath11k]
[ 145.570028] Code: df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 ec 01 00 00 48 8b ab a8 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 ea 48 c1 ea 03 <0f> b6 14 02 48 89 e8 83 e0 07 83 c0 03 45 85 ed 75 48 38 d0 7c 08
[ 145.570089] RSP: 0018:ffffc900025d7ac0 EFLAGS: 00010246
[ 145.570144] RAX: dffffc0000000000 RBX: ffff88814fca2dd8 RCX: 1ffffffff50cb455
[ 145.570196] RDX: 0000000000000000 RSI: ffff88814fca2dd8 RDI: ffff88814fca2e80
[ 145.570252] RBP: 0000000000000000 R08: 0000000000000000 R09: ffffffffa8659497
[ 145.570329] R10: fffffbfff50cb292 R11: 0000000000000001 R12: ffff88814fca0000
[ 145.570410] R13: 0000000000000000 R14: ffff88814fca2798 R15: ffff88814fca2dd8
[ 145.570465] FS: 00007fa399988540(0000) GS:ffff888233e00000(0000) knlGS:0000000000000000
[ 145.570519] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 145.570571] CR2: 00007fa399b51421 CR3: 0000000137898002 CR4: 00000000003706e0
[ 145.570623] Call Trace:
[ 145.570675] <TASK>
[ 145.570727] ? ath11k_ce_tx_process_cb+0x34b/0x860 [ath11k]
[ 145.570797] ath11k_ce_tx_process_cb+0x356/0x860 [ath11k]
[ 145.570864] ? tasklet_init+0x150/0x150
[ 145.570919] ? ath11k_ce_alloc_pipes+0x280/0x280 [ath11k]
[ 145.570986] ? tasklet_clear_sched+0x42/0xe0
[ 145.571042] ? tasklet_kill+0xe9/0x1b0
[ 145.571095] ? tasklet_clear_sched+0xe0/0xe0
[ 145.571148] ? irq_has_action+0x120/0x120
[ 145.571202] ath11k_ce_cleanup_pipes+0x45a/0x580 [ath11k]
[ 145.571270] ? ath11k_pci_stop+0x10e/0x170 [ath11k_pci]
[ 145.571345] ath11k_core_stop+0x8a/0xc0 [ath11k]
[ 145.571434] ath11k_core_deinit+0x9e/0x150 [ath11k]
[ 145.571499] ath11k_pci_remove+0xd2/0x260 [ath11k_pci]
[ 145.571553] pci_device_remove+0x9a/0x1c0
[ 145.571605] __device_release_driver+0x332/0x660
[ 145.571659] driver_detach+0x1e7/0x2c0
[ 145.571712] bus_remove_driver+0xe2/0x2d0
[ 145.571772] pci_unregister_driver+0x21/0x250
[ 145.571826] __do_sys_delete_module+0x30a/0x4b0
[ 145.571879] ? free_module+0xac0/0xac0
[ 145.571933] ? lockdep_hardirqs_on_prepare.part.0+0x18c/0x370
[ 145.571986] ? syscall_enter_from_user_mode+0x1d/0x50
[ 145.572039] ? lockdep_hardirqs_on+0x79/0x100
[ 145.572097] do_syscall_64+0x3b/0x90
[ 145.572153] entry_SYSCALL_64_after_hwframe+0x44/0xae
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
ath11k: mhi: use mhi_sync_power_up()
If amss.bin was missing ath11k would crash during 'rmmod ath11k_pci'. The
reason for that was that we were using mhi_async_power_up() which does not
check any errors. But mhi_sync_power_up() on the other hand does check for
errors so let's use that to fix the crash.
I was not able to find a reason why an async version was used.
ath11k_mhi_start() (which enables state ATH11K_MHI_POWER_ON) is called from
ath11k_hif_power_up(), which can sleep. So sync version should be safe to use
here.
[ 145.569731] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN PTI
[ 145.569789] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
[ 145.569843] CPU: 2 PID: 1628 Comm: rmmod Kdump: loaded Tainted: G W 5.16.0-wt-ath+ #567
[ 145.569898] Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0067.2021.0528.1339 05/28/2021
[ 145.569956] RIP: 0010:ath11k_hal_srng_access_begin+0xb5/0x2b0 [ath11k]
[ 145.570028] Code: df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 ec 01 00 00 48 8b ab a8 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 ea 48 c1 ea 03 <0f> b6 14 02 48 89 e8 83 e0 07 83 c0 03 45 85 ed 75 48 38 d0 7c 08
[ 145.570089] RSP: 0018:ffffc900025d7ac0 EFLAGS: 00010246
[ 145.570144] RAX: dffffc0000000000 RBX: ffff88814fca2dd8 RCX: 1ffffffff50cb455
[ 145.570196] RDX: 0000000000000000 RSI: ffff88814fca2dd8 RDI: ffff88814fca2e80
[ 145.570252] RBP: 0000000000000000 R08: 0000000000000000 R09: ffffffffa8659497
[ 145.570329] R10: fffffbfff50cb292 R11: 0000000000000001 R12: ffff88814fca0000
[ 145.570410] R13: 0000000000000000 R14: ffff88814fca2798 R15: ffff88814fca2dd8
[ 145.570465] FS: 00007fa399988540(0000) GS:ffff888233e00000(0000) knlGS:0000000000000000
[ 145.570519] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 145.570571] CR2: 00007fa399b51421 CR3: 0000000137898002 CR4: 00000000003706e0
[ 145.570623] Call Trace:
[ 145.570675] <TASK>
[ 145.570727] ? ath11k_ce_tx_process_cb+0x34b/0x860 [ath11k]
[ 145.570797] ath11k_ce_tx_process_cb+0x356/0x860 [ath11k]
[ 145.570864] ? tasklet_init+0x150/0x150
[ 145.570919] ? ath11k_ce_alloc_pipes+0x280/0x280 [ath11k]
[ 145.570986] ? tasklet_clear_sched+0x42/0xe0
[ 145.571042] ? tasklet_kill+0xe9/0x1b0
[ 145.571095] ? tasklet_clear_sched+0xe0/0xe0
[ 145.571148] ? irq_has_action+0x120/0x120
[ 145.571202] ath11k_ce_cleanup_pipes+0x45a/0x580 [ath11k]
[ 145.571270] ? ath11k_pci_stop+0x10e/0x170 [ath11k_pci]
[ 145.571345] ath11k_core_stop+0x8a/0xc0 [ath11k]
[ 145.571434] ath11k_core_deinit+0x9e/0x150 [ath11k]
[ 145.571499] ath11k_pci_remove+0xd2/0x260 [ath11k_pci]
[ 145.571553] pci_device_remove+0x9a/0x1c0
[ 145.571605] __device_release_driver+0x332/0x660
[ 145.571659] driver_detach+0x1e7/0x2c0
[ 145.571712] bus_remove_driver+0xe2/0x2d0
[ 145.571772] pci_unregister_driver+0x21/0x250
[ 145.571826] __do_sys_delete_module+0x30a/0x4b0
[ 145.571879] ? free_module+0xac0/0xac0
[ 145.571933] ? lockdep_hardirqs_on_prepare.part.0+0x18c/0x370
[ 145.571986] ? syscall_enter_from_user_mode+0x1d/0x50
[ 145.572039] ? lockdep_hardirqs_on+0x79/0x100
[ 145.572097] do_syscall_64+0x3b/0x90
[ 145.572153] entry_SYSCALL_64_after_hwframe+0x44/0xae
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2
🎖@cveNotify
🚨 CVE-2022-49133
In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: svm range restore work deadlock when process exit
kfd_process_notifier_release flush svm_range_restore_work
which calls svm_range_list_lock_and_flush_work to flush deferred_list
work, but if deferred_list work mmput release the last user, it will
call exit_mmap -> notifier_release, it is deadlock with below backtrace.
Move flush svm_range_restore_work to kfd_process_wq_release to avoid
deadlock. Then svm_range_restore_work take task->mm ref to avoid mm is
gone while validating and mapping ranges to GPU.
Workqueue: events svm_range_deferred_list_work [amdgpu]
Call Trace:
wait_for_completion+0x94/0x100
__flush_work+0x12a/0x1e0
__cancel_work_timer+0x10e/0x190
cancel_delayed_work_sync+0x13/0x20
kfd_process_notifier_release+0x98/0x2a0 [amdgpu]
__mmu_notifier_release+0x74/0x1f0
exit_mmap+0x170/0x200
mmput+0x5d/0x130
svm_range_deferred_list_work+0x104/0x230 [amdgpu]
process_one_work+0x220/0x3c0
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: svm range restore work deadlock when process exit
kfd_process_notifier_release flush svm_range_restore_work
which calls svm_range_list_lock_and_flush_work to flush deferred_list
work, but if deferred_list work mmput release the last user, it will
call exit_mmap -> notifier_release, it is deadlock with below backtrace.
Move flush svm_range_restore_work to kfd_process_wq_release to avoid
deadlock. Then svm_range_restore_work take task->mm ref to avoid mm is
gone while validating and mapping ranges to GPU.
Workqueue: events svm_range_deferred_list_work [amdgpu]
Call Trace:
wait_for_completion+0x94/0x100
__flush_work+0x12a/0x1e0
__cancel_work_timer+0x10e/0x190
cancel_delayed_work_sync+0x13/0x20
kfd_process_notifier_release+0x98/0x2a0 [amdgpu]
__mmu_notifier_release+0x74/0x1f0
exit_mmap+0x170/0x200
mmput+0x5d/0x130
svm_range_deferred_list_work+0x104/0x230 [amdgpu]
process_one_work+0x220/0x3c0
🎖@cveNotify
🚨 CVE-2022-49135
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix memory leak
[why]
Resource release is needed on the error handling path
to prevent memory leak.
[how]
Fix this by adding kfree on the error handling path.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix memory leak
[why]
Resource release is needed on the error handling path
to prevent memory leak.
[how]
Fix this by adding kfree on the error handling path.
🎖@cveNotify
🚨 CVE-2022-49137
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/amdgpu/amdgpu_cs: fix refcount leak of a dma_fence obj
This issue takes place in an error path in
amdgpu_cs_fence_to_handle_ioctl(). When `info->in.what` falls into
default case, the function simply returns -EINVAL, forgetting to
decrement the reference count of a dma_fence obj, which is bumped
earlier by amdgpu_cs_get_fence(). This may result in reference count
leaks.
Fix it by decreasing the refcount of specific object before returning
the error code.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/amdgpu/amdgpu_cs: fix refcount leak of a dma_fence obj
This issue takes place in an error path in
amdgpu_cs_fence_to_handle_ioctl(). When `info->in.what` falls into
default case, the function simply returns -EINVAL, forgetting to
decrement the reference count of a dma_fence obj, which is bumped
earlier by amdgpu_cs_get_fence(). This may result in reference count
leaks.
Fix it by decreasing the refcount of specific object before returning
the error code.
🎖@cveNotify
🚨 CVE-2022-49159
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Implement ref count for SRB
The timeout handler and the done function are racing. When
qla2x00_async_iocb_timeout() starts to run it can be preempted by the
normal response path (via the firmware?). qla24xx_async_gpsc_sp_done()
releases the SRB unconditionally. When scheduling back to
qla2x00_async_iocb_timeout() qla24xx_async_abort_cmd() will access an freed
sp->qpair pointer:
qla2xxx [0000:83:00.0]-2871:0: Async-gpsc timeout - hdl=63d portid=234500 50:06:0e:80:08:77:b6:21.
qla2xxx [0000:83:00.0]-2853:0: Async done-gpsc res 0, WWPN 50:06:0e:80:08:77:b6:21
qla2xxx [0000:83:00.0]-2854:0: Async-gpsc OUT WWPN 20:45:00:27:f8:75:33:00 speeds=2c00 speed=0400.
qla2xxx [0000:83:00.0]-28d8:0: qla24xx_handle_gpsc_event 50:06:0e:80:08:77:b6:21 DS 7 LS 6 rc 0 login 1|1 rscn 1|0 lid 5
BUG: unable to handle kernel NULL pointer dereference at 0000000000000004
IP: qla24xx_async_abort_cmd+0x1b/0x1c0 [qla2xxx]
Obvious solution to this is to introduce a reference counter. One reference
is taken for the normal code path (the 'good' case) and one for the timeout
path. As we always race between the normal good case and the timeout/abort
handler we need to serialize it. Also we cannot assume any order between
the handlers. Since this is slow path we can use proper synchronization via
locks.
When we are able to cancel a timer (del_timer returns 1) we know there
can't be any error handling in progress because the timeout handler hasn't
expired yet, thus we can safely decrement the refcounter by one.
If we are not able to cancel the timer, we know an abort handler is
running. We have to make sure we call sp->done() in the abort handlers
before calling kref_put().
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Implement ref count for SRB
The timeout handler and the done function are racing. When
qla2x00_async_iocb_timeout() starts to run it can be preempted by the
normal response path (via the firmware?). qla24xx_async_gpsc_sp_done()
releases the SRB unconditionally. When scheduling back to
qla2x00_async_iocb_timeout() qla24xx_async_abort_cmd() will access an freed
sp->qpair pointer:
qla2xxx [0000:83:00.0]-2871:0: Async-gpsc timeout - hdl=63d portid=234500 50:06:0e:80:08:77:b6:21.
qla2xxx [0000:83:00.0]-2853:0: Async done-gpsc res 0, WWPN 50:06:0e:80:08:77:b6:21
qla2xxx [0000:83:00.0]-2854:0: Async-gpsc OUT WWPN 20:45:00:27:f8:75:33:00 speeds=2c00 speed=0400.
qla2xxx [0000:83:00.0]-28d8:0: qla24xx_handle_gpsc_event 50:06:0e:80:08:77:b6:21 DS 7 LS 6 rc 0 login 1|1 rscn 1|0 lid 5
BUG: unable to handle kernel NULL pointer dereference at 0000000000000004
IP: qla24xx_async_abort_cmd+0x1b/0x1c0 [qla2xxx]
Obvious solution to this is to introduce a reference counter. One reference
is taken for the normal code path (the 'good' case) and one for the timeout
path. As we always race between the normal good case and the timeout/abort
handler we need to serialize it. Also we cannot assume any order between
the handlers. Since this is slow path we can use proper synchronization via
locks.
When we are able to cancel a timer (del_timer returns 1) we know there
can't be any error handling in progress because the timeout handler hasn't
expired yet, thus we can safely decrement the refcounter by one.
If we are not able to cancel the timer, we know an abort handler is
running. We have to make sure we call sp->done() in the abort handlers
before calling kref_put().
🎖@cveNotify
🚨 CVE-2022-49169
In the Linux kernel, the following vulnerability has been resolved:
f2fs: use spin_lock to avoid hang
[14696.634553] task:cat state:D stack: 0 pid:1613738 ppid:1613735 flags:0x00000004
[14696.638285] Call Trace:
[14696.639038] <TASK>
[14696.640032] __schedule+0x302/0x930
[14696.640969] schedule+0x58/0xd0
[14696.641799] schedule_preempt_disabled+0x18/0x30
[14696.642890] __mutex_lock.constprop.0+0x2fb/0x4f0
[14696.644035] ? mod_objcg_state+0x10c/0x310
[14696.645040] ? obj_cgroup_charge+0xe1/0x170
[14696.646067] __mutex_lock_slowpath+0x13/0x20
[14696.647126] mutex_lock+0x34/0x40
[14696.648070] stat_show+0x25/0x17c0 [f2fs]
[14696.649218] seq_read_iter+0x120/0x4b0
[14696.650289] ? aa_file_perm+0x12a/0x500
[14696.651357] ? lru_cache_add+0x1c/0x20
[14696.652470] seq_read+0xfd/0x140
[14696.653445] full_proxy_read+0x5c/0x80
[14696.654535] vfs_read+0xa0/0x1a0
[14696.655497] ksys_read+0x67/0xe0
[14696.656502] __x64_sys_read+0x1a/0x20
[14696.657580] do_syscall_64+0x3b/0xc0
[14696.658671] entry_SYSCALL_64_after_hwframe+0x44/0xae
[14696.660068] RIP: 0033:0x7efe39df1cb2
[14696.661133] RSP: 002b:00007ffc8badd948 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[14696.662958] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007efe39df1cb2
[14696.664757] RDX: 0000000000020000 RSI: 00007efe399df000 RDI: 0000000000000003
[14696.666542] RBP: 00007efe399df000 R08: 00007efe399de010 R09: 00007efe399de010
[14696.668363] R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000000000
[14696.670155] R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000
[14696.671965] </TASK>
[14696.672826] task:umount state:D stack: 0 pid:1614985 ppid:1614984 flags:0x00004000
[14696.674930] Call Trace:
[14696.675903] <TASK>
[14696.676780] __schedule+0x302/0x930
[14696.677927] schedule+0x58/0xd0
[14696.679019] schedule_preempt_disabled+0x18/0x30
[14696.680412] __mutex_lock.constprop.0+0x2fb/0x4f0
[14696.681783] ? destroy_inode+0x65/0x80
[14696.683006] __mutex_lock_slowpath+0x13/0x20
[14696.684305] mutex_lock+0x34/0x40
[14696.685442] f2fs_destroy_stats+0x1e/0x60 [f2fs]
[14696.686803] f2fs_put_super+0x158/0x390 [f2fs]
[14696.688238] generic_shutdown_super+0x7a/0x120
[14696.689621] kill_block_super+0x27/0x50
[14696.690894] kill_f2fs_super+0x7f/0x100 [f2fs]
[14696.692311] deactivate_locked_super+0x35/0xa0
[14696.693698] deactivate_super+0x40/0x50
[14696.694985] cleanup_mnt+0x139/0x190
[14696.696209] __cleanup_mnt+0x12/0x20
[14696.697390] task_work_run+0x64/0xa0
[14696.698587] exit_to_user_mode_prepare+0x1b7/0x1c0
[14696.700053] syscall_exit_to_user_mode+0x27/0x50
[14696.701418] do_syscall_64+0x48/0xc0
[14696.702630] entry_SYSCALL_64_after_hwframe+0x44/0xae
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
f2fs: use spin_lock to avoid hang
[14696.634553] task:cat state:D stack: 0 pid:1613738 ppid:1613735 flags:0x00000004
[14696.638285] Call Trace:
[14696.639038] <TASK>
[14696.640032] __schedule+0x302/0x930
[14696.640969] schedule+0x58/0xd0
[14696.641799] schedule_preempt_disabled+0x18/0x30
[14696.642890] __mutex_lock.constprop.0+0x2fb/0x4f0
[14696.644035] ? mod_objcg_state+0x10c/0x310
[14696.645040] ? obj_cgroup_charge+0xe1/0x170
[14696.646067] __mutex_lock_slowpath+0x13/0x20
[14696.647126] mutex_lock+0x34/0x40
[14696.648070] stat_show+0x25/0x17c0 [f2fs]
[14696.649218] seq_read_iter+0x120/0x4b0
[14696.650289] ? aa_file_perm+0x12a/0x500
[14696.651357] ? lru_cache_add+0x1c/0x20
[14696.652470] seq_read+0xfd/0x140
[14696.653445] full_proxy_read+0x5c/0x80
[14696.654535] vfs_read+0xa0/0x1a0
[14696.655497] ksys_read+0x67/0xe0
[14696.656502] __x64_sys_read+0x1a/0x20
[14696.657580] do_syscall_64+0x3b/0xc0
[14696.658671] entry_SYSCALL_64_after_hwframe+0x44/0xae
[14696.660068] RIP: 0033:0x7efe39df1cb2
[14696.661133] RSP: 002b:00007ffc8badd948 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[14696.662958] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007efe39df1cb2
[14696.664757] RDX: 0000000000020000 RSI: 00007efe399df000 RDI: 0000000000000003
[14696.666542] RBP: 00007efe399df000 R08: 00007efe399de010 R09: 00007efe399de010
[14696.668363] R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000000000
[14696.670155] R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000
[14696.671965] </TASK>
[14696.672826] task:umount state:D stack: 0 pid:1614985 ppid:1614984 flags:0x00004000
[14696.674930] Call Trace:
[14696.675903] <TASK>
[14696.676780] __schedule+0x302/0x930
[14696.677927] schedule+0x58/0xd0
[14696.679019] schedule_preempt_disabled+0x18/0x30
[14696.680412] __mutex_lock.constprop.0+0x2fb/0x4f0
[14696.681783] ? destroy_inode+0x65/0x80
[14696.683006] __mutex_lock_slowpath+0x13/0x20
[14696.684305] mutex_lock+0x34/0x40
[14696.685442] f2fs_destroy_stats+0x1e/0x60 [f2fs]
[14696.686803] f2fs_put_super+0x158/0x390 [f2fs]
[14696.688238] generic_shutdown_super+0x7a/0x120
[14696.689621] kill_block_super+0x27/0x50
[14696.690894] kill_f2fs_super+0x7f/0x100 [f2fs]
[14696.692311] deactivate_locked_super+0x35/0xa0
[14696.693698] deactivate_super+0x40/0x50
[14696.694985] cleanup_mnt+0x139/0x190
[14696.696209] __cleanup_mnt+0x12/0x20
[14696.697390] task_work_run+0x64/0xa0
[14696.698587] exit_to_user_mode_prepare+0x1b7/0x1c0
[14696.700053] syscall_exit_to_user_mode+0x27/0x50
[14696.701418] do_syscall_64+0x48/0xc0
[14696.702630] entry_SYSCALL_64_after_hwframe+0x44/0xae
🎖@cveNotify
🚨 CVE-2022-49170
In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to do sanity check on curseg->alloc_type
As Wenqing Liu reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=215657
- Overview
UBSAN: array-index-out-of-bounds in fs/f2fs/segment.c:3460:2 when mount and operate a corrupted image
- Reproduce
tested on kernel 5.17-rc4, 5.17-rc6
1. mkdir test_crash
2. cd test_crash
3. unzip tmp2.zip
4. mkdir mnt
5. ./single_test.sh f2fs 2
- Kernel dump
[ 46.434454] loop0: detected capacity change from 0 to 131072
[ 46.529839] F2FS-fs (loop0): Mounted with checkpoint version = 7548c2d9
[ 46.738319] ================================================================================
[ 46.738412] UBSAN: array-index-out-of-bounds in fs/f2fs/segment.c:3460:2
[ 46.738475] index 231 is out of range for type 'unsigned int [2]'
[ 46.738539] CPU: 2 PID: 939 Comm: umount Not tainted 5.17.0-rc6 #1
[ 46.738547] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-1ubuntu1.1 04/01/2014
[ 46.738551] Call Trace:
[ 46.738556] <TASK>
[ 46.738563] dump_stack_lvl+0x47/0x5c
[ 46.738581] ubsan_epilogue+0x5/0x50
[ 46.738592] __ubsan_handle_out_of_bounds+0x68/0x80
[ 46.738604] f2fs_allocate_data_block+0xdff/0xe60 [f2fs]
[ 46.738819] do_write_page+0xef/0x210 [f2fs]
[ 46.738934] f2fs_do_write_node_page+0x3f/0x80 [f2fs]
[ 46.739038] __write_node_page+0x2b7/0x920 [f2fs]
[ 46.739162] f2fs_sync_node_pages+0x943/0xb00 [f2fs]
[ 46.739293] f2fs_write_checkpoint+0x7bb/0x1030 [f2fs]
[ 46.739405] kill_f2fs_super+0x125/0x150 [f2fs]
[ 46.739507] deactivate_locked_super+0x60/0xc0
[ 46.739517] deactivate_super+0x70/0xb0
[ 46.739524] cleanup_mnt+0x11a/0x200
[ 46.739532] __cleanup_mnt+0x16/0x20
[ 46.739538] task_work_run+0x67/0xa0
[ 46.739547] exit_to_user_mode_prepare+0x18c/0x1a0
[ 46.739559] syscall_exit_to_user_mode+0x26/0x40
[ 46.739568] do_syscall_64+0x46/0xb0
[ 46.739584] entry_SYSCALL_64_after_hwframe+0x44/0xae
The root cause is we missed to do sanity check on curseg->alloc_type,
result in out-of-bound accessing on sbi->block_count[] array, fix it.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to do sanity check on curseg->alloc_type
As Wenqing Liu reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=215657
- Overview
UBSAN: array-index-out-of-bounds in fs/f2fs/segment.c:3460:2 when mount and operate a corrupted image
- Reproduce
tested on kernel 5.17-rc4, 5.17-rc6
1. mkdir test_crash
2. cd test_crash
3. unzip tmp2.zip
4. mkdir mnt
5. ./single_test.sh f2fs 2
- Kernel dump
[ 46.434454] loop0: detected capacity change from 0 to 131072
[ 46.529839] F2FS-fs (loop0): Mounted with checkpoint version = 7548c2d9
[ 46.738319] ================================================================================
[ 46.738412] UBSAN: array-index-out-of-bounds in fs/f2fs/segment.c:3460:2
[ 46.738475] index 231 is out of range for type 'unsigned int [2]'
[ 46.738539] CPU: 2 PID: 939 Comm: umount Not tainted 5.17.0-rc6 #1
[ 46.738547] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-1ubuntu1.1 04/01/2014
[ 46.738551] Call Trace:
[ 46.738556] <TASK>
[ 46.738563] dump_stack_lvl+0x47/0x5c
[ 46.738581] ubsan_epilogue+0x5/0x50
[ 46.738592] __ubsan_handle_out_of_bounds+0x68/0x80
[ 46.738604] f2fs_allocate_data_block+0xdff/0xe60 [f2fs]
[ 46.738819] do_write_page+0xef/0x210 [f2fs]
[ 46.738934] f2fs_do_write_node_page+0x3f/0x80 [f2fs]
[ 46.739038] __write_node_page+0x2b7/0x920 [f2fs]
[ 46.739162] f2fs_sync_node_pages+0x943/0xb00 [f2fs]
[ 46.739293] f2fs_write_checkpoint+0x7bb/0x1030 [f2fs]
[ 46.739405] kill_f2fs_super+0x125/0x150 [f2fs]
[ 46.739507] deactivate_locked_super+0x60/0xc0
[ 46.739517] deactivate_super+0x70/0xb0
[ 46.739524] cleanup_mnt+0x11a/0x200
[ 46.739532] __cleanup_mnt+0x16/0x20
[ 46.739538] task_work_run+0x67/0xa0
[ 46.739547] exit_to_user_mode_prepare+0x18c/0x1a0
[ 46.739559] syscall_exit_to_user_mode+0x26/0x40
[ 46.739568] do_syscall_64+0x46/0xb0
[ 46.739584] entry_SYSCALL_64_after_hwframe+0x44/0xae
The root cause is we missed to do sanity check on curseg->alloc_type,
result in out-of-bound accessing on sbi->block_count[] array, fix it.
🎖@cveNotify