🚨 CVE-2026-59846
A flaw was found in libssh. A malicious username expanded through %r in ProxyCommand handling can inject shell metacharacters, exposing environment variables and causing unintended shell behavior.
🎖@cveNotify
A flaw was found in libssh. A malicious username expanded through %r in ProxyCommand handling can inject shell metacharacters, exposing environment variables and causing unintended shell behavior.
🎖@cveNotify
🚨 CVE-2026-59847
A flaw was found in libssh. Incorrect AES-GCM finalization checks in builds using the OpenSSL backend can effectively remove integrity protection, allowing an in-path attacker to modify plaintext on the wire without detection.
🎖@cveNotify
A flaw was found in libssh. Incorrect AES-GCM finalization checks in builds using the OpenSSL backend can effectively remove integrity protection, allowing an in-path attacker to modify plaintext on the wire without detection.
🎖@cveNotify
🚨 CVE-2026-59848
A flaw was found in libssh. A malicious SFTP server can send responses for unknown request IDs that libssh clients keep queued indefinitely, causing unbounded memory growth and client-side denial of service.
🎖@cveNotify
A flaw was found in libssh. A malicious SFTP server can send responses for unknown request IDs that libssh clients keep queued indefinitely, causing unbounded memory growth and client-side denial of service.
🎖@cveNotify
🚨 CVE-2026-47013
Vulnerability in Oracle Java SE (component: JavaFX). The supported version that is affected is Oracle Java SE: 8u491. Easily exploitable vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE. Successful attacks of this vulnerability can result in unauthorized ability to cause a partial denial of service (partial DOS) of Oracle Java SE. Note: This vulnerability can be exploited by using APIs in the specified Component, e.g., through a web service which supplies data to the APIs. This vulnerability also applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. CVSS 3.1 Base Score 5.3 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L).
🎖@cveNotify
Vulnerability in Oracle Java SE (component: JavaFX). The supported version that is affected is Oracle Java SE: 8u491. Easily exploitable vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE. Successful attacks of this vulnerability can result in unauthorized ability to cause a partial denial of service (partial DOS) of Oracle Java SE. Note: This vulnerability can be exploited by using APIs in the specified Component, e.g., through a web service which supplies data to the APIs. This vulnerability also applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. CVSS 3.1 Base Score 5.3 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L).
🎖@cveNotify
🚨 CVE-2026-47021
Vulnerability in the Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: 2D). Supported versions that are affected are Oracle Java SE: 8u491, 8u491-perf, 11.0.31, 17.0.19, 21.0.11, 25.0.3, 26.0.1; Oracle GraalVM for JDK: 17.0.19 and 21.0.11; Oracle GraalVM Enterprise Edition: 21.3.18. Easily exploitable vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Successful attacks of this vulnerability can result in unauthorized ability to cause a partial denial of service (partial DOS) of Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Note: This vulnerability can be exploited by using APIs in the specified Component, e.g., through a web service which supplies data to the APIs. This vulnerability also applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. CVSS 3.1 Base Score 5.3 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L).
🎖@cveNotify
Vulnerability in the Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: 2D). Supported versions that are affected are Oracle Java SE: 8u491, 8u491-perf, 11.0.31, 17.0.19, 21.0.11, 25.0.3, 26.0.1; Oracle GraalVM for JDK: 17.0.19 and 21.0.11; Oracle GraalVM Enterprise Edition: 21.3.18. Easily exploitable vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Successful attacks of this vulnerability can result in unauthorized ability to cause a partial denial of service (partial DOS) of Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Note: This vulnerability can be exploited by using APIs in the specified Component, e.g., through a web service which supplies data to the APIs. This vulnerability also applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. CVSS 3.1 Base Score 5.3 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L).
🎖@cveNotify
🚨 CVE-2026-61207
Vulnerability in the PeopleSoft Enterprise SCM eProcurement product of Oracle PeopleSoft (component: Manage Requisition Status). The supported version that is affected is 9.2. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise PeopleSoft Enterprise SCM eProcurement. While the vulnerability is in PeopleSoft Enterprise SCM eProcurement, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all PeopleSoft Enterprise SCM eProcurement accessible data as well as unauthorized update, insert or delete access to some of PeopleSoft Enterprise SCM eProcurement accessible data. CVSS 3.1 Base Score 9.3 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:C/C:H/I:L/A:N).
🎖@cveNotify
Vulnerability in the PeopleSoft Enterprise SCM eProcurement product of Oracle PeopleSoft (component: Manage Requisition Status). The supported version that is affected is 9.2. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise PeopleSoft Enterprise SCM eProcurement. While the vulnerability is in PeopleSoft Enterprise SCM eProcurement, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all PeopleSoft Enterprise SCM eProcurement accessible data as well as unauthorized update, insert or delete access to some of PeopleSoft Enterprise SCM eProcurement accessible data. CVSS 3.1 Base Score 9.3 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:C/C:H/I:L/A:N).
🎖@cveNotify
🚨 CVE-2026-64833
FFmpeg versions 0.7.1 through 8.1.2 contain an out-of-bounds read vulnerability in the S/PDIF muxer that allows attackers to access memory beyond buffer boundaries by supplying a crafted DTS stream with a core_size value larger than the actual packet length. Attackers can exploit the missing bounds check in the spdif_header_dts4 function by providing a malicious DTS-HD audio stream during S/PDIF re-muxing to trigger unauthorized memory reads beyond the packet buffer.
🎖@cveNotify
FFmpeg versions 0.7.1 through 8.1.2 contain an out-of-bounds read vulnerability in the S/PDIF muxer that allows attackers to access memory beyond buffer boundaries by supplying a crafted DTS stream with a core_size value larger than the actual packet length. Attackers can exploit the missing bounds check in the spdif_header_dts4 function by providing a malicious DTS-HD audio stream during S/PDIF re-muxing to trigger unauthorized memory reads beyond the packet buffer.
🎖@cveNotify
FFmpeg Forgejo
avformat/spdifenc: bound DTS core_size against the packet size in the HD path · 6f80e27654
Fixes: out of array read
Fixes: yBSax492UIB9
Fixes: 482d98f69b2 (spdifenc: IEC 61937 encapsulation of DTS-HD for HDMI)
Found-by: Pavel Kohout (Aisle Research)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: yBSax492UIB9
Fixes: 482d98f69b2 (spdifenc: IEC 61937 encapsulation of DTS-HD for HDMI)
Found-by: Pavel Kohout (Aisle Research)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
🚨 CVE-2026-3482
IBM Sterling B2B Integrator and IBM Sterling File Gateway 6.2.0.0 through 6.2.0.5_2, 6.2.1.0 through 6.2.1.1_2, and 6.2.2.0 through 6.2.2.0_1 could allow an unauthenticated user to read sensitive information by bypassing authentication through a specially crafted HTTP request.
🎖@cveNotify
IBM Sterling B2B Integrator and IBM Sterling File Gateway 6.2.0.0 through 6.2.0.5_2, 6.2.1.0 through 6.2.1.1_2, and 6.2.2.0 through 6.2.2.0_1 could allow an unauthenticated user to read sensitive information by bypassing authentication through a specially crafted HTTP request.
🎖@cveNotify
Ibm
Security Bulletin: Access Control Security Vulnerability in IBM Sterling B2B Integrator and IBM Sterling File Gateway (CVE-2026…
IBM Sterling B2B Integrator and IBM Sterling File Gateway have addressed Access Control security vulnerability.
🚨 CVE-2026-16756
Missing connection and header-read timeouts and the absence of a concurrent-connection cap in the default serve() path of Amazon aws-smithy-http-server might allow remote attackers to cause a denial of service by opening many connections and sending partial requests that are never completed, exhausting server sockets and tasks.
To mitigate this issue, users should upgrade to aws-smithy-http-server 0.66.5 or later.
🎖@cveNotify
Missing connection and header-read timeouts and the absence of a concurrent-connection cap in the default serve() path of Amazon aws-smithy-http-server might allow remote attackers to cause a denial of service by opening many connections and sending partial requests that are never completed, exhausting server sockets and tasks.
To mitigate this issue, users should upgrade to aws-smithy-http-server 0.66.5 or later.
🎖@cveNotify
🚨 CVE-2026-7007
The Zephyr ext2 file system validates the on-disk superblock in ext2_verify_disk_superblock() (subsys/fs/ext2/ext2_impl.c) before completing a mount. The validator checked the magic number, block size, revision and feature flags, but did not verify that the on-disk fields s_blocks_per_group and s_inodes_per_group are non-zero. Both fields are read directly from the image and are later used as divisors during mount-time initialization.
During mount, get_ngroups() divides and modulos s_blocks_count by s_blocks_per_group (reached via ext2_fetch_block_group() from ext2_init_fs()), and get_itable_entry() divides (ino - 1) by s_inodes_per_group when fetching the root inode (both in subsys/fs/ext2/ext2_diskops.c). A superblock with either field set to zero therefore causes an integer division by zero during the mount sequence.
An attacker who can present a crafted ext2 image to a device that mounts ext2 — removable media such as an SD card or a USB mass-storage device — can trigger this. On ARMv7-M / ARMv8-M-mainline Cortex-M targets, divide-by-zero trapping is enabled (SCB_CCR_DIV_0_TRP), so the division raises a UsageFault that Zephyr treats as a fatal error, producing a denial of service. The impact is limited to availability; the malformed value is consumed only as a divisor.
The fix rejects a zero s_blocks_per_group or s_inodes_per_group in the superblock validator, returning -EINVAL so the mount fails before any block-group or inode I/O occurs.
🎖@cveNotify
The Zephyr ext2 file system validates the on-disk superblock in ext2_verify_disk_superblock() (subsys/fs/ext2/ext2_impl.c) before completing a mount. The validator checked the magic number, block size, revision and feature flags, but did not verify that the on-disk fields s_blocks_per_group and s_inodes_per_group are non-zero. Both fields are read directly from the image and are later used as divisors during mount-time initialization.
During mount, get_ngroups() divides and modulos s_blocks_count by s_blocks_per_group (reached via ext2_fetch_block_group() from ext2_init_fs()), and get_itable_entry() divides (ino - 1) by s_inodes_per_group when fetching the root inode (both in subsys/fs/ext2/ext2_diskops.c). A superblock with either field set to zero therefore causes an integer division by zero during the mount sequence.
An attacker who can present a crafted ext2 image to a device that mounts ext2 — removable media such as an SD card or a USB mass-storage device — can trigger this. On ARMv7-M / ARMv8-M-mainline Cortex-M targets, divide-by-zero trapping is enabled (SCB_CCR_DIV_0_TRP), so the division raises a UsageFault that Zephyr treats as a fatal error, producing a denial of service. The impact is limited to availability; the malformed value is consumed only as a divisor.
The fix rejects a zero s_blocks_per_group or s_inodes_per_group in the superblock validator, returning -EINVAL so the mount fails before any block-group or inode I/O occurs.
🎖@cveNotify
GitHub
fs: ext2: reject superblock with zero group divisors · zephyrproject-rtos/zephyr@babc090
ext2_verify_disk_superblock() did not validate that the on-disk fields
s_blocks_per_group and s_inodes_per_group are non-zero. Both are later
used as divisors during mount-time initialization:
-...
s_blocks_per_group and s_inodes_per_group are non-zero. Both are later
used as divisors during mount-time initialization:
-...
🚨 CVE-2026-16463
A maliciously crafted DXF file, when parsed through Autodesk AutoCAD, can force a Heap-Based Overflow vulnerability. A malicious actor can leverage this vulnerability to cause a crash, read sensitive data, or execute arbitrary code in the context of the current process.
🎖@cveNotify
A maliciously crafted DXF file, when parsed through Autodesk AutoCAD, can force a Heap-Based Overflow vulnerability. A malicious actor can leverage this vulnerability to cause a crash, read sensitive data, or execute arbitrary code in the context of the current process.
🎖@cveNotify
Autodesk
Autodesk Access | Formerly Autodesk Desktop App | Autodesk
Autodesk Access simplifies the update experience. Quickly and easily install updates for your desktop products from the app. Download now for free.
🚨 CVE-2026-11980
IBM Aspera Desktop App 1.0.5 through 1.0.19 can allow arbitrary code execution by loading DLL files at start-up.
🎖@cveNotify
IBM Aspera Desktop App 1.0.5 through 1.0.19 can allow arbitrary code execution by loading DLL files at start-up.
🎖@cveNotify
Ibm
Security Bulletin: Multiple vulnerabilities in IBM Desktop App
Multiple vulnerabilities were addressed in IBM Aspera Desktop App v1.1.0.
🚨 CVE-2026-55707
In OpenStack Neutron before 28.0.2, the subnetpool onboarding API does not verify ownership of the target subnets. An authenticated user can onboard subnets from another project's shared network into their own subnetpool, mutating the victim's subnet state and altering L3 routing and address scope behavior for victim routers.
🎖@cveNotify
In OpenStack Neutron before 28.0.2, the subnetpool onboarding API does not verify ownership of the target subnets. An authenticated user can onboard subnets from another project's shared network into their own subnetpool, mutating the victim's subnet state and altering L3 routing and address scope behavior for victim routers.
🎖@cveNotify
🚨 CVE-2025-30241
Certain web
interface components in affected TP-Link Aginet devices do not validate and sanitize user-supplied input properly before
passing it to system-level command execution functions. An authenticated adjacent attacker may inject
specially crafted input to execute arbitrary operation system commands with
elevated privileges.
Successful
exploitation may allow execution of arbitrary system commands, potentially
leading to full device compromise.
🎖@cveNotify
Certain web
interface components in affected TP-Link Aginet devices do not validate and sanitize user-supplied input properly before
passing it to system-level command execution functions. An authenticated adjacent attacker may inject
specially crafted input to execute arbitrary operation system commands with
elevated privileges.
Successful
exploitation may allow execution of arbitrary system commands, potentially
leading to full device compromise.
🎖@cveNotify
🚨 CVE-2026-14548
The Ray Enterprise Translation WordPress plugin through 1.7.3 does not perform any capability or nonce checks on one of its AJAX actions, allowing any authenticated user, including Subscribers, to overwrite the administrator-configured translation API token with an arbitrary value.
🎖@cveNotify
The Ray Enterprise Translation WordPress plugin through 1.7.3 does not perform any capability or nonce checks on one of its AJAX actions, allowing any authenticated user, including Subscribers, to overwrite the administrator-configured translation API token with an arbitrary value.
🎖@cveNotify
WPScan
Ray Enterprise Translation <= 1.7.3 - Subscriber+ Arbitrary API Token Update
See details on Ray Enterprise Translation <= 1.7.3 - Subscriber+ Arbitrary API Token Update CVE 2026-14548. View the latest Plugin Vulnerabilities on WPScan.
🚨 CVE-2026-14549
The Ray Enterprise Translation WordPress plugin through 1.7.3 does not perform any capability or nonce checks on one of its AJAX actions, allowing any authenticated user, including Subscribers, to add or delete the site's configured languages.
🎖@cveNotify
The Ray Enterprise Translation WordPress plugin through 1.7.3 does not perform any capability or nonce checks on one of its AJAX actions, allowing any authenticated user, including Subscribers, to add or delete the site's configured languages.
🎖@cveNotify
WPScan
Ray Enterprise Translation <= 1.7.3 - Subscriber+ Language Addition and Deletion
See details on Ray Enterprise Translation <= 1.7.3 - Subscriber+ Language Addition and Deletion CVE 2026-14549. View the latest Plugin Vulnerabilities on WPScan.
🚨 CVE-2026-50060
A vulnerability has been identified in Solid Edge SE2025 (All versions < V225.0 Update 15), Solid Edge SE2026 (All versions < V226.0 Update 7). The affected applications contain a use-after-free vulnerability that could be triggered while parsing specially crafted DFT files. This could allow an attacker to execute code in the context of the current process.
🎖@cveNotify
A vulnerability has been identified in Solid Edge SE2025 (All versions < V225.0 Update 15), Solid Edge SE2026 (All versions < V226.0 Update 7). The affected applications contain a use-after-free vulnerability that could be triggered while parsing specially crafted DFT files. This could allow an attacker to execute code in the context of the current process.
🎖@cveNotify
🚨 CVE-2026-57262
A vulnerability has been identified in LOGO! Soft Comfort (All versions < V9). Affected products use a static, hardcoded AES master key to encrypt project files. This could allow a local attacker to extract the master key from the application files or memory and use it to decrypt project files or remove project passwords entirely without knowing the actual user-defined password.
🎖@cveNotify
A vulnerability has been identified in LOGO! Soft Comfort (All versions < V9). Affected products use a static, hardcoded AES master key to encrypt project files. This could allow a local attacker to extract the master key from the application files or memory and use it to decrypt project files or remove project passwords entirely without knowing the actual user-defined password.
🎖@cveNotify
🚨 CVE-2026-58115
A vulnerability has been identified in SIMATIC IoT2050 Advanced (6ES7647-0BA00-1YA2) (All versions < V4.3.4.1 running Industrial OS with Node-RED installed). Affected devices do not enforce authentication on the Node-RED HTTP interface, allowing unauthenticated access to programming nodes that are capable of executing system commands on the server.
This could allow an unauthenticated remote attacker to create malicious flows through the HTTP interface in order to execute arbitrary code on the underlying server with maximum privileges.
🎖@cveNotify
A vulnerability has been identified in SIMATIC IoT2050 Advanced (6ES7647-0BA00-1YA2) (All versions < V4.3.4.1 running Industrial OS with Node-RED installed). Affected devices do not enforce authentication on the Node-RED HTTP interface, allowing unauthenticated access to programming nodes that are capable of executing system commands on the server.
This could allow an unauthenticated remote attacker to create malicious flows through the HTTP interface in order to execute arbitrary code on the underlying server with maximum privileges.
🎖@cveNotify
🚨 CVE-2026-59700
A vulnerability has been identified in Simcenter Femap (All versions < V2606.0001). The affected applications contains an out of bounds read vulnerability while parsing specially crafted BMP files. This could allow an attacker to execute code in the context of the current process.
🎖@cveNotify
A vulnerability has been identified in Simcenter Femap (All versions < V2606.0001). The affected applications contains an out of bounds read vulnerability while parsing specially crafted BMP files. This could allow an attacker to execute code in the context of the current process.
🎖@cveNotify