🚨 CVE-2026-64236
In the Linux kernel, the following vulnerability has been resolved:

i2c: davinci: fix division by zero on missing clock-frequency

When the 'clock-frequency' property is missing from the device tree,
the driver falls back to DAVINCI_I2C_DEFAULT_BUS_FREQ. However, this
macro was defined in kHz (100), whereas the device tree property is
expected in Hz.

The probe function divided the fallback value by 1000, causing
integer truncation that resulted in dev->bus_freq = 0. This triggered
a deterministic division-by-zero kernel panic when calculating clock
dividers later in the probe sequence.

Fix this by redefining DAVINCI_I2C_DEFAULT_BUS_FREQ in Hz (100000)
to match the expected device tree property unit, allowing the existing
division logic to work correctly for both cases.

🎖@cveNotify

🚨 CVE-2026-64237
In the Linux kernel, the following vulnerability has been resolved:

Input: elan_i2c - validate firmware size before use

Ensure that the firmware file is large enough to contain the expected
number of pages and the signature (which resides at the end of the
firmware blob) before accessing them to prevent potential out-of-bounds
reads.

🎖@cveNotify

🚨 CVE-2026-16280
An integer overflow when calculating physical offsets for sparse PMRs may result in 32-bit truncation of address computations for PMRs larger than 4 GB. This can lead to incorrect GPU MMU mappings and may allow a non-privileged user to trigger access to unintended physical memory, resulting in memory corruption or information disclosure.

🎖@cveNotify

🚨 CVE-2026-9322
IBM WebSphere Application Server 9.0, and 8.5 and IBM WebSphere Application Server - Liberty 17.0.0.3 through 26.0.0.7 are vulnerable to a denial of service via a crafted HTTP request.

🎖@cveNotify

🚨 CVE-2022-50073
In the Linux kernel, the following vulnerability has been resolved:

net: tap: NULL pointer derefence in dev_parse_header_protocol when skb->dev is null

Fixes a NULL pointer derefence bug triggered from tap driver.
When tap_get_user calls virtio_net_hdr_to_skb the skb->dev is null
(in tap.c skb->dev is set after the call to virtio_net_hdr_to_skb)
virtio_net_hdr_to_skb calls dev_parse_header_protocol which
needs skb->dev field to be valid.

The line that trigers the bug is in dev_parse_header_protocol
(dev is at offset 0x10 from skb and is stored in RAX register)
if (!dev->header_ops || !dev->header_ops->parse_protocol)
22e1: mov 0x10(%rbx),%rax
22e5: mov 0x230(%rax),%rax

Setting skb->dev before the call in tap.c fixes the issue.

BUG: kernel NULL pointer dereference, address: 0000000000000230
RIP: 0010:virtio_net_hdr_to_skb.constprop.0+0x335/0x410 [tap]
Code: c0 0f 85 b7 fd ff ff eb d4 41 39 c6 77 cf 29 c6 48 89 df 44 01 f6 e8 7a 79 83 c1 48 85 c0 0f 85 d9 fd ff ff eb b7 48 8b 43 10 <48> 8b 80 30 02 00 00 48 85 c0 74 55 48 8b 40 28 48 85 c0 74 4c 48
RSP: 0018:ffffc90005c27c38 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff888298f25300 RCX: 0000000000000010
RDX: 0000000000000005 RSI: ffffc90005c27cb6 RDI: ffff888298f25300
RBP: ffffc90005c27c80 R08: 00000000ffffffea R09: 00000000000007e8
R10: ffff88858ec77458 R11: 0000000000000000 R12: 0000000000000001
R13: 0000000000000014 R14: ffffc90005c27e08 R15: ffffc90005c27cb6
FS: 0000000000000000(0000) GS:ffff88858ec40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000230 CR3: 0000000281408006 CR4: 00000000003706e0
Call Trace:
tap_get_user+0x3f1/0x540 [tap]
tap_sendmsg+0x56/0x362 [tap]
? get_tx_bufs+0xc2/0x1e0 [vhost_net]
handle_tx_copy+0x114/0x670 [vhost_net]
handle_tx+0xb0/0xe0 [vhost_net]
handle_tx_kick+0x15/0x20 [vhost_net]
vhost_worker+0x7b/0xc0 [vhost]
? vhost_vring_call_reset+0x40/0x40 [vhost]
kthread+0xfa/0x120
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x1f/0x30

🎖@cveNotify

🚨 CVE-2026-55576
MaaAssistantArknights is a one-click tool for daily Arknights tasks. In the current dev-v2 workflow, .github/workflows/release-preparation.yml inlined attacker-controlled github.event.pull_request.title into a run: shell command during the pull_request opened, reopened, and ready_for_review events, so a non-draft fork PR whose title starts with Release v could execute shell commands on the ubuntu-latest runner during the generate-changelog job. This vulnerability is fixed by commit cafc3946059e6337d2089d4fec8b6885ba17c332.

🎖@cveNotify

🚨 CVE-2026-14741
HTTP::Date versions before 6.08 for Perl allow CPU exhaustion via polynomial regex backtracking in parse_date.

parse_date() matches the date string against a chain of alternative regexes, and str2time() delegates to it. Several of these patterns place unbounded quantifiers next to each other before a trailing `\s*$` anchor. A valid date prefix followed by a long interior run of digits, letters, or whitespace and a single trailing byte that defeats the final match forces the engine to repartition the run, giving polynomial (about quadratic) backtracking. A header value of a few tens of kilobytes runs for tens of seconds of CPU.

HTTP::Date parses timestamps such as HTTP `Date`, `Expires`, and `Last-Modified` headers, which commonly originate from untrusted sources. Any caller that passes an untrusted date header to str2time() or parse_date() can be driven to consume unbounded CPU, a denial of service.

🎖@cveNotify

🚨 CVE-2026-64230
In the Linux kernel, the following vulnerability has been resolved:

regulator: tps65219: fix irq_data.rdev not being assigned

Commit 64a6b577490c ("regulator: tps65219: Remove debugging helper
function") removed the tps65219_get_rdev_by_name() helper along with
the irq_data.rdev assignment that depended on it. This left
irq_data.rdev uninitialized for all IRQs, causing undefined behavior
when regulator_notifier_call_chain() is called from the IRQ handler:

Internal error: Oops: 0000000096000004
pc : regulator_notifier_call_chain
lr : tps65219_regulator_irq_handler
Call trace:
regulator_notifier_call_chain
tps65219_regulator_irq_handler
handle_nested_irq
regmap_irq_thread
irq_thread_fn
irq_thread
kthread
ret_from_fork

Instead of restoring a dedicated lookup array, restructure the probe
function to combine regulator registration with IRQ registration in
the same loop. This way the rdev returned by devm_regulator_register()
is naturally available for assigning to irq_data.rdev without any
auxiliary data structure.

Non-regulator IRQs (SENSOR, TIMEOUT) that don't correspond to any
registered regulator are registered with rdev=NULL, and the IRQ handler
is protected with a NULL check to avoid crashing.

🎖@cveNotify

🚨 CVE-2026-64231
In the Linux kernel, the following vulnerability has been resolved:

drm/msm/dsi: don't dump registers past the mapped region

On DSI 6G platforms the IO address space is internally adjusted by
io_offset. Later this adjusted address might be used for memory dumping.
However the size that is used for memory dumping isn't adjusted to
account for the io_offset, leading to the potential access to the
unmapped region. Lower ctrl_size by the io_offset value to prevent
access past the mapped area.

msm_disp_snapshot_add_block+0x1d4/0x3c8 [msm] (P)
msm_dsi_host_snapshot+0x4c/0x78 [msm]
msm_dsi_snapshot+0x28/0x50 [msm]
msm_disp_snapshot_capture_state+0x74/0x140 [msm]
msm_disp_snapshot_state_sync+0x60/0x90 [msm]
_msm_disp_snapshot_work+0x30/0x90 [msm]
kthread_worker_fn+0xdc/0x460
kthread+0x120/0x140

Patchwork: https://patchwork.freedesktop.org/patch/721747/

🎖@cveNotify

🚨 CVE-2026-18381
A flaw was found in the koku-metrics-operator for Red Hat OpenShift. The operator's CostManagementMetricsConfig custom resource allows a user able to edit the CR to specify an arbitrary upload URL. The operator attaches its own Kubernetes service-account bearer token to queries sent to this user-controlled URL, allowing the attacker to obtain the token.

🎖@cveNotify

🚨 CVE-2026-18382
A flaw was found in koku-metrics-operator. The operator's CostManagementMetricsConfig custom resource allows a user able to edit the CR to specify an arbitrary OAuth token endpoint. When authentication.type is set to service-account, the operator sends the tenant's Red Hat SSO client_id and client_secret to this user-controlled URL, allowing the attacker to obtain the credentials.

🎖@cveNotify

🚨 CVE-2025-13736
When Multi-Attribute Login is enabled, the login interface fails to consistently mask the existence of user accounts. For valid users, the server resolves and displays their canonical username, while for non-existent users, it echoes the original input. This occurs regardless of the validate_username configuration.

The discovery of valid usernames can increase the risk of brute force attacks, social engineering attacks, and targeted information leakage. Attackers can leverage this information to craft more effective phishing campaigns or social engineering tactics to compromise user accounts or extract sensitive data.

🎖@cveNotify

🚨 CVE-2025-15039
The Conditional Authentication (Adaptive Authentication) script does not correctly enforce the completion of all required authentication steps when a specific multi-step pattern involving certain authenticators is configured. This allows an attacker to bypass intermediate authentication challenges by exploiting how the script handles callbacks and re-execution of authentication steps.

Successful exploitation allows a malicious actor to gain unauthorized access to a targeted user account. This vulnerability can only be exploited when all of the following conditions are met: the application login flow contains a specific secondary authenticator, the Conditional Authentication script is configured with particular event callbacks and re-executes an authentication step, the targeted user has one of the impacted authenticators enrolled, and the attacker successfully completes any preceding authentication steps.

🎖@cveNotify

🚨 CVE-2026-0637
When an Event Publisher output adapter is configured with irrelevant properties, the affected products log these properties. This logging occurs without sufficient validation or sanitization of the property values.

A malicious actor with access to the 'wso2carbon' log files could retrieve sensitive information, such as user credentials or other confidential data, that was inadvertently logged due to misconfiguration, potentially leading to unauthorized access.

🎖@cveNotify

🚨 CVE-2025-13294
An unauthenticated SQL injection vulnerability exists in the web server of TBEA TLogger V2.1.0.0B0.0.0.0. Multiple HTTP endpoints incorporate attacker-controlled parameters directly into SQLite queries without sufficient validation or parameterization. A remote unauthenticated attacker can exploit these endpoints to read, modify, or delete data stored in the device's CCU.db database.

🎖@cveNotify

🚨 CVE-2025-15680
TBEA TLogger V2.1.0.0B0.0.0.0 exposes a UART interface on the device's circuit board without sufficient protection. A physically proximate attacker can connect to the UART interface and observe the device boot process and runtime debug output. The disclosed information includes operating system details, software versions, network configuration, filesystem paths, and other implementation and debugging information that may assist an attacker in further compromising the device.

🎖@cveNotify

🚨 CVE-2025-15681
TBEA TLogger V2.1.0.0B0.0.0.0 contains an authentication bypass in its web server. After a user has previously authenticated to the device, an unauthenticated attacker can directly access protected functionality through the /index.asp endpoint without providing valid credentials. This allows the attacker to access functionality intended for authenticated users and may expose or modify device configuration and data. Logging out from the bypassed state can additionally cause the web server to crash.

🎖@cveNotify

🚨 CVE-2025-15682
TBEA TLogger V2.1.0.0B0.0.0.0 contains an unauthenticated resource exhaustion vulnerability in its web server. An unauthenticated remote attacker can send PUT requests to the /tmp/ endpoint, causing the web server to create persistent files containing attacker-controlled data under /opt/myapp/webserver/. The generated files are not removed because the web server attempts to move them into a non-existent directory. Repeated requests can therefore exhaust available storage and cause a denial-of-service condition.

🎖@cveNotify

🚨 CVE-2025-15683
TBEA TLogger V2.1.0.0B0.0.0.0 contains multiple unauthenticated denial-of-service vulnerabilities in its web server. An unauthenticated remote attacker can invoke specific HTTP endpoints to reboot or reset the device, clear application data, or terminate the web server through a segmentation fault. In addition, multiple action endpoints process attacker-controlled parameters using unsafe string operations such as sprintf() and strcat() without adequate bounds checking, allowing crafted input to trigger buffer overflows and crash the web server. The affected endpoints include onRestart, onReset, ClearData, uploadInvFile, getIndiaRPData, YearCaparity, TotalfaultData, recordData, InvHistoryData, CollectHistoryData, InvFaultData, GetPortTableByParm, and UpdatePortConfig.

🎖@cveNotify

🚨 CVE-2025-30240
The affected TP-Link Aginet devices do not properly validate symbolic links created on external USB storage
devices. By placing a crafted symbolic link on supported storage media, an
attacker may cause the system to resolve the link.









Successful
exploitation may allow unauthorized read access to sensitive files within the
device filesystem.

🎖@cveNotify

🚨 CVE-2026-11811
The UpdateHub over-the-air update client's start_coap_client() in subsys/mgmt/updatehub/updatehub.c leaks the CoAP/DTLS socket descriptor on its connection-setup failure paths. The shared error: cleanup gated socket closing on a ret > 0 flag, but ret was set to -1 immediately after the socket was created, so when zsock_setsockopt() (DTLS) or zsock_connect() subsequently failed the gate was false and cleanup_connection() was never called. The open descriptor in the global ctx.sock was then overwritten by the next attempt, permanently leaking it from the socket / net_context pool until reboot.

The failing setup path is reached every time the OTA client tries to contact the UpdateHub server and the connection cannot be established — driven automatically by the periodic autohandler() poll (and on demand via the updatehub_probe()/updatehub_update() API or the updatehub run shell command). The DTLS handshake/connect outcome is influenceable by a network or on-path attacker who drops, resets, or otherwise disrupts traffic to the server, and also fails naturally whenever the server is unreachable.

Each failed attempt permanently leaks one descriptor; once the shared socket pool is exhausted, networking degrades device-wide until the device is rebooted, a denial-of-service condition. Severity is low because the leak rate is bounded by the configured OTA poll interval (default once per 24 hours), the effect is gradual and recovered by reboot, and only builds with the UpdateHub client enabled are affected. There is no memory-corruption, information-disclosure, or authentication impact.

🎖@cveNotify