🚨 CVE-2024-14043
A vulnerability was determined in Open5GS up to 2.7.1. This vulnerability affects the function mme_s6a_subscription_data_from_avp of the file src/mme/mme-fd-path.c of the component Diameter S6a Interface. Executing a manipulation of the argument msisdn_len can lead to heap-based buffer overflow. It is possible to launch the attack remotely. The exploit has been publicly disclosed and may be utilized. Upgrading to version 2.7.2 is able to resolve this issue. This patch is called 7ea82cb87bb65c3694d8d7c7a5efed1c4d3c9304. Upgrading the affected component is recommended.
🎖@cveNotify
A vulnerability was determined in Open5GS up to 2.7.1. This vulnerability affects the function mme_s6a_subscription_data_from_avp of the file src/mme/mme-fd-path.c of the component Diameter S6a Interface. Executing a manipulation of the argument msisdn_len can lead to heap-based buffer overflow. It is possible to launch the attack remotely. The exploit has been publicly disclosed and may be utilized. Upgrading to version 2.7.2 is able to resolve this issue. This patch is called 7ea82cb87bb65c3694d8d7c7a5efed1c4d3c9304. Upgrading the affected component is recommended.
🎖@cveNotify
GitHub
GitHub - open5gs/open5gs: Open5GS is a C-language Open Source implementation for 5G Core and EPC, i.e. the core network of LTE/NR…
Open5GS is a C-language Open Source implementation for 5G Core and EPC, i.e. the core network of LTE/NR network (Release-19) - open5gs/open5gs
🚨 CVE-2024-14044
A vulnerability was identified in Open5GS up to 2.7.1. This issue affects the function pcrf_rx_aar_cb of the file src/pcrf/pcrf-rx-path.c of the component Diameter Rx Handler. The manipulation of the argument num_of_media_component/num_of_sub leads to buffer overflow. The attack can be initiated remotely. The exploit is publicly available and might be used. Upgrading to version 2.7.2 is capable of addressing this issue. The identifier of the patch is 87b4e4535c77ded627cdb6f4e4e2e3ea761f40b7. It is recommended to upgrade the affected component.
🎖@cveNotify
A vulnerability was identified in Open5GS up to 2.7.1. This issue affects the function pcrf_rx_aar_cb of the file src/pcrf/pcrf-rx-path.c of the component Diameter Rx Handler. The manipulation of the argument num_of_media_component/num_of_sub leads to buffer overflow. The attack can be initiated remotely. The exploit is publicly available and might be used. Upgrading to version 2.7.2 is capable of addressing this issue. The identifier of the patch is 87b4e4535c77ded627cdb6f4e4e2e3ea761f40b7. It is recommended to upgrade the affected component.
🎖@cveNotify
GitHub
GitHub - open5gs/open5gs: Open5GS is a C-language Open Source implementation for 5G Core and EPC, i.e. the core network of LTE/NR…
Open5GS is a C-language Open Source implementation for 5G Core and EPC, i.e. the core network of LTE/NR network (Release-19) - open5gs/open5gs
🚨 CVE-2026-6484
In an UEFI, Lack of verified boot to certain FV may cause arbitrary code execution.
🎖@cveNotify
In an UEFI, Lack of verified boot to certain FV may cause arbitrary code execution.
🎖@cveNotify
Insyde Software
SA-2026003
🚨 CVE-2026-70398
A flaw was found in multicloud-integrations, a component of Red Hat Advanced Cluster Management (RHACM). This vulnerability allows an authenticated user, referred to as a tenant, to manipulate the GitOpsCluster controller. By exploiting this, a tenant can redirect sensitive spoke cluster bearer tokens from secure locations to a namespace they control. This unauthorized access to tokens can lead to the disclosure of critical information and bypass security policies within ArgoCD AppProjects.
🎖@cveNotify
A flaw was found in multicloud-integrations, a component of Red Hat Advanced Cluster Management (RHACM). This vulnerability allows an authenticated user, referred to as a tenant, to manipulate the GitOpsCluster controller. By exploiting this, a tenant can redirect sensitive spoke cluster bearer tokens from secure locations to a namespace they control. This unauthorized access to tokens can lead to the disclosure of critical information and bypass security policies within ArgoCD AppProjects.
🎖@cveNotify
Redhat
CVE-2026-70398 - Red Hat Customer Portal
CVE Details App
🚨 CVE-2026-72526
A flaw was found in the multicloud-integrations component. The Application propagation controller processes the `ocm-managed-cluster` annotation from an Application Custom Resource (CR) without proper validation. A tenant with permissions to create Applications on the hub cluster can exploit this to target arbitrary managed clusters. This can force ArgoCD on the spoke clusters to synchronize attacker-controlled manifests, leading to arbitrary code execution or privilege escalation on those clusters.
🎖@cveNotify
A flaw was found in the multicloud-integrations component. The Application propagation controller processes the `ocm-managed-cluster` annotation from an Application Custom Resource (CR) without proper validation. A tenant with permissions to create Applications on the hub cluster can exploit this to target arbitrary managed clusters. This can force ArgoCD on the spoke clusters to synchronize attacker-controlled manifests, leading to arbitrary code execution or privilege escalation on those clusters.
🎖@cveNotify
Redhat
CVE-2026-72526 - Red Hat Customer Portal
CVE Details App
🚨 CVE-2025-15685
A flaw has been found in Open5GS up to 2.7.1. Affected by this vulnerability is an unknown functionality of the component freeDiameter. This manipulation causes memory corruption. The attack is possible to be carried out remotely.
🎖@cveNotify
A flaw has been found in Open5GS up to 2.7.1. Affected by this vulnerability is an unknown functionality of the component freeDiameter. This manipulation causes memory corruption. The attack is possible to be carried out remotely.
🎖@cveNotify
GitHub
GitHub - open5gs/open5gs: Open5GS is a C-language Open Source implementation for 5G Core and EPC, i.e. the core network of LTE/NR…
Open5GS is a C-language Open Source implementation for 5G Core and EPC, i.e. the core network of LTE/NR network (Release-19) - open5gs/open5gs
🚨 CVE-2026-19587
Uncontrolled Resource Consumption vulnerability in Samsung Open Source rlottie allows Excessive Allocation.
🎖@cveNotify
Uncontrolled Resource Consumption vulnerability in Samsung Open Source rlottie allows Excessive Allocation.
🎖@cveNotify
GitHub
Add shape-content budget to bound repeater cost by mmaciola · Pull Request #599 · Samsung/rlottie
Repeaters can multiply a shape by up to 10000 copies, and each shape can have up to 1024 points. Multiplying both together (or nesting repeaters inside each other) could still produce very large am...
🚨 CVE-2025-15687
A security flaw has been discovered in Open5GS up to 2.7.6. Impacted is the function smf_gx_cca_cb of the component SMF Diameter Gx Credit-Control-Answer Handler. The manipulation results in denial of service. The attack can be launched remotely. The exploit has been released to the public and may be used for attacks. Upgrading to version 2.7.7 is recommended to address this issue. The patch is identified as f23d7a5e959acd8f37b925dc29b85f26b7d391cb. Upgrading the affected component is advised.
🎖@cveNotify
A security flaw has been discovered in Open5GS up to 2.7.6. Impacted is the function smf_gx_cca_cb of the component SMF Diameter Gx Credit-Control-Answer Handler. The manipulation results in denial of service. The attack can be launched remotely. The exploit has been released to the public and may be used for attacks. Upgrading to version 2.7.7 is recommended to address this issue. The patch is identified as f23d7a5e959acd8f37b925dc29b85f26b7d391cb. Upgrading the affected component is advised.
🎖@cveNotify
GitHub
GitHub - open5gs/open5gs: Open5GS is a C-language Open Source implementation for 5G Core and EPC, i.e. the core network of LTE/NR…
Open5GS is a C-language Open Source implementation for 5G Core and EPC, i.e. the core network of LTE/NR network (Release-19) - open5gs/open5gs
🚨 CVE-2026-12234
The userspace syscall verifiers z_vrfy_zsock_sendmsg() and z_vrfy_zsock_recvmsg() in subsys/net/lib/sockets/sockets.c snapshot the caller-supplied struct net_msghdr into a kernel-side copy with k_usermode_from_copy(), but then re-read the still-live user struct for subsequent decisions. The kernel iovec shadow buffer is sized from one read of msg->msg_iovlen, while the population loop is bounded by a second, live read of the same field.
Because msg points into ordinary user memory, a cooperating second thread in the same memory domain can inflate msg->msg_iovlen in the window between the sizing read and the loop test (a classic double-fetch / TOCTOU). The population loop then iterates past the number of net_iovec slots actually allocated, writing attacker-influenced iov_base/iov_len values beyond the end of the kernel-heap shadow buffer. The recvmsg verifier has the same defect on both its inbound and result write-back loops.
The code is reachable from an unprivileged user thread whenever CONFIG_USERSPACE is enabled and the zsock_sendmsg/zsock_recvmsg syscalls are available. A successful race corrupts kernel-managed heap memory across the user-to-kernel privilege boundary, yielding a local privilege-escalation primitive or, at minimum, a kernel-fault denial of service. The fix copies the header once and derives every size, bound, and gate from the snapshot, copying each iovec entry atomically so its base and length can no longer be raced apart.
🎖@cveNotify
The userspace syscall verifiers z_vrfy_zsock_sendmsg() and z_vrfy_zsock_recvmsg() in subsys/net/lib/sockets/sockets.c snapshot the caller-supplied struct net_msghdr into a kernel-side copy with k_usermode_from_copy(), but then re-read the still-live user struct for subsequent decisions. The kernel iovec shadow buffer is sized from one read of msg->msg_iovlen, while the population loop is bounded by a second, live read of the same field.
Because msg points into ordinary user memory, a cooperating second thread in the same memory domain can inflate msg->msg_iovlen in the window between the sizing read and the loop test (a classic double-fetch / TOCTOU). The population loop then iterates past the number of net_iovec slots actually allocated, writing attacker-influenced iov_base/iov_len values beyond the end of the kernel-heap shadow buffer. The recvmsg verifier has the same defect on both its inbound and result write-back loops.
The code is reachable from an unprivileged user thread whenever CONFIG_USERSPACE is enabled and the zsock_sendmsg/zsock_recvmsg syscalls are available. A successful race corrupts kernel-managed heap memory across the user-to-kernel privilege boundary, yielding a local privilege-escalation primitive or, at minimum, a kernel-fault denial of service. The fix copies the header once and derives every size, bound, and gate from the snapshot, copying each iovec entry atomically so its base and length can no longer be raced apart.
🎖@cveNotify
GitHub
net: sockets: fix TOCTOU in recvmsg/sendmsg · zephyrproject-rtos/zephyr@2e0f9cf
z_vrfy_zsock_sendmsg() and z_vrfy_zsock_recvmsg() copy the user
msghdr into msg_copy but then re-read msg->msg_iovlen (and other
fields) live to size the allocation, bound the loop, and gate...
msghdr into msg_copy but then re-read msg->msg_iovlen (and other
fields) live to size the allocation, bound the loop, and gate...
🚨 CVE-2026-12235
The Linkable Loadable Extensions (llext) subsystem mis-handles PLT/RELA relocation entries when linking a relocatable (partially-linked) ELF extension. In llext_link_plt() (subsys/llext/llext_link.c), the relocatable branch (tgt != NULL, the path used for Xtensa relocatable objects) computed the patch address as ext->mem[LLEXT_MEM_TEXT] - text.sh_offset + rela.r_offset + tgt->sh_offset and then performed the relocation write there without validating rela.r_offset. Its sibling shared/dynamic branch already rejected out-of-range offsets via llext_file_offset().
rela.r_offset is read directly from the ELF's RELA table, so a crafted entry with an offset larger than the target section makes the write land arbitrarily far outside the extension's text buffer. The result is an attacker-influenced out-of-bounds write (the location via r_offset, the written value being the resolved symbol address) performed in supervisor context at link time, before any extension code runs.
The path is reached from llext_load() whenever an application loads an attacker-influenced ELF extension on Xtensa with writable storage; llext is documented to accept extensions of untrusted origin. Impact is supervisor-context memory corruption (integrity and availability loss, and a sandbox-boundary escape for user-mode extensions). Exploitation is gated by the Xtensa relocatable PLT path and writable storage, and turning the out-of-range write into a useful primitive is non-trivial.
The fix adds a bound check rejecting any RELA entry whose r_offset >= tgt->sh_size, mirroring the existing validation in the shared branch.
🎖@cveNotify
The Linkable Loadable Extensions (llext) subsystem mis-handles PLT/RELA relocation entries when linking a relocatable (partially-linked) ELF extension. In llext_link_plt() (subsys/llext/llext_link.c), the relocatable branch (tgt != NULL, the path used for Xtensa relocatable objects) computed the patch address as ext->mem[LLEXT_MEM_TEXT] - text.sh_offset + rela.r_offset + tgt->sh_offset and then performed the relocation write there without validating rela.r_offset. Its sibling shared/dynamic branch already rejected out-of-range offsets via llext_file_offset().
rela.r_offset is read directly from the ELF's RELA table, so a crafted entry with an offset larger than the target section makes the write land arbitrarily far outside the extension's text buffer. The result is an attacker-influenced out-of-bounds write (the location via r_offset, the written value being the resolved symbol address) performed in supervisor context at link time, before any extension code runs.
The path is reached from llext_load() whenever an application loads an attacker-influenced ELF extension on Xtensa with writable storage; llext is documented to accept extensions of untrusted origin. Impact is supervisor-context memory corruption (integrity and availability loss, and a sandbox-boundary escape for user-mode extensions). Exploitation is gated by the Xtensa relocatable PLT path and writable storage, and turning the out-of-range write into a useful primitive is non-trivial.
The fix adds a bound check rejecting any RELA entry whose r_offset >= tgt->sh_size, mirroring the existing validation in the shared branch.
🎖@cveNotify
GitHub
llext: bound-check r_offset in Xtensa PLT relocatable branch · zephyrproject-rtos/zephyr@106540a
The PLT relocation loop has two branches depending on whether the
ELF is relocatable (tgt != NULL) or shared/dynamic (tgt == NULL).
The shared branch already validates r_offset via llext_file_offs...
ELF is relocatable (tgt != NULL) or shared/dynamic (tgt == NULL).
The shared branch already validates r_offset via llext_file_offs...
🚨 CVE-2026-18474
The WP Directory Kit WordPress plugin before 1.5.6 does not sanitise and escape a parameter before using it in a SQL statement, leading to a SQL injection exploitable by unauthenticated users when a non-default search field type is configured.
🎖@cveNotify
The WP Directory Kit WordPress plugin before 1.5.6 does not sanitise and escape a parameter before using it in a SQL statement, leading to a SQL injection exploitable by unauthenticated users when a non-default search field type is configured.
🎖@cveNotify
WPScan
WP Directory Kit < 1.5.6 - Unauthenticated SQL Injection via search_location and search_category
See details on WP Directory Kit < 1.5.6 - Unauthenticated SQL Injection via search_location and search_category CVE 2026-18474. View the latest Plugin Vulnerabilities on WPScan.
🚨 CVE-2026-18943
The WPC Admin Columns WordPress plugin before 2.3.4 does not have authorisation checks in one of its AJAX actions, allowing users with a role as low as subscriber to read arbitrary user, post and term metadata, including data belonging to administrators.
🎖@cveNotify
The WPC Admin Columns WordPress plugin before 2.3.4 does not have authorisation checks in one of its AJAX actions, allowing users with a role as low as subscriber to read arbitrary user, post and term metadata, including data belonging to administrators.
🎖@cveNotify
WPScan
WPC Admin Columns < 2.3.4 - Subscriber+ Arbitrary User/Post/Term Meta Disclosure
See details on WPC Admin Columns < 2.3.4 - Subscriber+ Arbitrary User/Post/Term Meta Disclosure CVE 2026-18943. View the latest Plugin Vulnerabilities on WPScan.
🚨 CVE-2026-18962
The WP Photo Album Plus WordPress plugin before 9.2.09.002 does not check that the current user is allowed to upload into the album they target when it processes a front-end upload, allowing any authenticated user, such as a Subscriber, to upload files into albums owned by other users or by the administrator. Exploitation requires the WP Photo Album Plus WordPress plugin before 9.2.09.002's front-end user upload feature to be enabled, which is not the default.
🎖@cveNotify
The WP Photo Album Plus WordPress plugin before 9.2.09.002 does not check that the current user is allowed to upload into the album they target when it processes a front-end upload, allowing any authenticated user, such as a Subscriber, to upload files into albums owned by other users or by the administrator. Exploitation requires the WP Photo Album Plus WordPress plugin before 9.2.09.002's front-end user upload feature to be enabled, which is not the default.
🎖@cveNotify
WPScan
WP Photo Album Plus < 9.2.09.002 - Subscriber+ Cross-Album File Upload via Missing Authorization
See details on WP Photo Album Plus < 9.2.09.002 - Subscriber+ Cross-Album File Upload via Missing Authorization CVE 2026-18962. View the latest Plugin Vulnerabilities on WPScan.
🚨 CVE-2026-19050
The ProSolution WP Client WordPress plugin before 2.0.9 does not validate a user-supplied URL, and does not check the capability or nonce of the requester, before performing a server-side HTTP request with it, allowing any authenticated user, such as a subscriber, to make the site issue arbitrary requests to internal hosts and services, including requests with an attacker-chosen method, headers and body.
🎖@cveNotify
The ProSolution WP Client WordPress plugin before 2.0.9 does not validate a user-supplied URL, and does not check the capability or nonce of the requester, before performing a server-side HTTP request with it, allowing any authenticated user, such as a subscriber, to make the site issue arbitrary requests to internal hosts and services, including requests with an attacker-chosen method, headers and body.
🎖@cveNotify
WPScan
ProSolution WP Client < 2.0.9 - Subscriber+ SSRF via proSol_url_validate
See details on ProSolution WP Client < 2.0.9 - Subscriber+ SSRF via proSol_url_validate CVE 2026-19050. View the latest Plugin Vulnerabilities on WPScan.
🚨 CVE-2026-19052
The ProSolution WP Client WordPress plugin before 2.0.9 does not perform capability checks on two administrative AJAX actions, and the nonce they rely on is published on its public frontend, allowing any authenticated user, such as a subscriber, to trigger an administrative data synchronisation and to clear the ProSolution WP Client WordPress plugin before 2.0.9's activity records.
🎖@cveNotify
The ProSolution WP Client WordPress plugin before 2.0.9 does not perform capability checks on two administrative AJAX actions, and the nonce they rely on is published on its public frontend, allowing any authenticated user, such as a subscriber, to trigger an administrative data synchronisation and to clear the ProSolution WP Client WordPress plugin before 2.0.9's activity records.
🎖@cveNotify
WPScan
ProSolution WP Client < 2.0.9 - Subscriber+ proSol_ajaxTablesync and proSol_ajaxClearlog Calls
See details on ProSolution WP Client < 2.0.9 - Subscriber+ proSol_ajaxTablesync and proSol_ajaxClearlog Calls CVE 2026-19052. View the latest Plugin Vulnerabilities on WPScan.
🚨 CVE-2026-19073
The Order Sync with Zendesk for WooCommerce WordPress plugin before 2.2.3 does not perform any capability check on one of its REST API endpoints, and does not verify that the requester owns the account being queried, allowing unauthenticated attackers to retrieve the order history and purchase totals of any customer whose email address they know or can enumerate.
🎖@cveNotify
The Order Sync with Zendesk for WooCommerce WordPress plugin before 2.2.3 does not perform any capability check on one of its REST API endpoints, and does not verify that the requester owns the account being queried, allowing unauthenticated attackers to retrieve the order history and purchase totals of any customer whose email address they know or can enumerate.
🎖@cveNotify
WPScan
Order Sync with Zendesk for WooCommerce < 2.2.3 - Unauthenticated Customer Order Data Disclosure
See details on Order Sync with Zendesk for WooCommerce < 2.2.3 - Unauthenticated Customer Order Data Disclosure CVE 2026-19073. View the latest Plugin Vulnerabilities on WPScan.
🚨 CVE-2026-19594
Insufficient input sanitization in Snowflake Python API (`snowflake.core`) versions prior to 1.13.0 allowed confused-deputy privilege escalation through two related weaknesses: path traversal (CWE-22) via unencoded `..` identifier path segments, and HTTP parameter pollution (CWE-141) via unencoded `&`/`#`/`=` characters in query string values. An attacker with access to a downstream application built on snowflake.core could exploit the path traversal by supplying `..` as an object name, causing `snowflake.core` to issue REST requests against a parent resource or exploit the parameter pollution by injecting `&`/`#`/`=` into a free-form name field to override constraints on swap, clone, or rename operations — all executed under the application's privileged session. Successful exploitation requires the attacker to control an identifier or object-name string in an application built on snowflake.core that passes it to `snowflake.core` under a higher-privileged Snowflake session (e.g., an EXECUTE AS OWNER stored procedure, Streamlit app, or Native App). The fix is available in Snowflake Python API version 1.13.0, which also addresses several additional security findings. Users must manually upgrade.
🎖@cveNotify
Insufficient input sanitization in Snowflake Python API (`snowflake.core`) versions prior to 1.13.0 allowed confused-deputy privilege escalation through two related weaknesses: path traversal (CWE-22) via unencoded `..` identifier path segments, and HTTP parameter pollution (CWE-141) via unencoded `&`/`#`/`=` characters in query string values. An attacker with access to a downstream application built on snowflake.core could exploit the path traversal by supplying `..` as an object name, causing `snowflake.core` to issue REST requests against a parent resource or exploit the parameter pollution by injecting `&`/`#`/`=` into a free-form name field to override constraints on swap, clone, or rename operations — all executed under the application's privileged session. Successful exploitation requires the attacker to control an identifier or object-name string in an application built on snowflake.core that passes it to `snowflake.core` under a higher-privileged Snowflake session (e.g., an EXECUTE AS OWNER stored procedure, Streamlit app, or Native App). The fix is available in Snowflake Python API version 1.13.0, which also addresses several additional security findings. Users must manually upgrade.
🎖@cveNotify
PyPI
snowflake.core
Snowflake Python API for Resource Management
🚨 CVE-2025-41771
An authenticated attacker with low privileges can access an endpoint in the controller’s web interface that is vulnerable to SQL injection. The vulnerability affects a SQLite database used only for storing notification messages. Therefore, the impact is limited to the system’s notification functionality.
🎖@cveNotify
An authenticated attacker with low privileges can access an endpoint in the controller’s web interface that is vulnerable to SQL injection. The vulnerability affects a SQLite database used only for storing notification messages. Therefore, the impact is limited to the system’s notification functionality.
🎖@cveNotify
🚨 CVE-2026-19426
POS System developed by FitSoft has a Missing Authentication vulnerability. Unauthenticated remote attackers can directly access and operate the system.
🎖@cveNotify
POS System developed by FitSoft has a Missing Authentication vulnerability. Unauthenticated remote attackers can directly access and operate the system.
🎖@cveNotify
🚨 CVE-2026-67282
Joomla Extension - fabrikar.com - Unauthenticated remote code execution in Fabrik < 4.6.8 - An unauthenticated attacker could execute arbitrary code by using the frontend listfilter model.
🎖@cveNotify
Joomla Extension - fabrikar.com - Unauthenticated remote code execution in Fabrik < 4.6.8 - An unauthenticated attacker could execute arbitrary code by using the frontend listfilter model.
🎖@cveNotify
Fabrikar
Fabrik - Joomla Custom Website Application Builder - Home
Fabrik, is an open source application development, form and database management component.
🚨 CVE-2026-67283
Joomla Extension - tabaoca.org - Improper ACL implementation allows file operations in Cotton Cloud < 2.0.2 - Unauthenticated users could perform various file-related operations (read, delete, overwrite, re-assign permissions) on every file managed within the extension.
🎖@cveNotify
Joomla Extension - tabaoca.org - Improper ACL implementation allows file operations in Cotton Cloud < 2.0.2 - Unauthenticated users could perform various file-related operations (read, delete, overwrite, re-assign permissions) on every file managed within the extension.
🎖@cveNotify
www.tabaoca.org
Tabaoca Social.