🚨 CVE-2026-46340
Netty is a network application framework for development of protocol servers and clients. In versions of netty-transport-sctp prior to 4.1.135.Final and 4.2.15.Final, for each non-complete SctpMessage fragment the handler does `fragments.put(streamId, Unpooled.wrappedBuffer(frag, byteBuf))`, wrapping the previous accumulator and the new slice into a *new* CompositeByteBuf every time. After N fragments the accumulator is an N-deep chain of composites, each holding references and component arrays; readableBytes()/getBytes() on the final buffer recurse N levels. There is no limit on N, on total bytes, or on the number of streamIdentifiers an attacker can open (each gets its own map entry). A peer that never sets the `complete` flag can grow this structure indefinitely from tiny 1-byte DATA chunks. Versions 4.1.135.Final and 4.2.15.Final patch the issue.

🎖@cveNotify

🚨 CVE-2026-47691
Netty is a network application framework for development of protocol servers and clients. Prior to versions 4.1.135.Final and 4.2.15.Final, Netty's `DnsResolveContext` insufficiently validates the bailiwick of NS records, enabling DNS Cache Poisoning. An attacker controlling an authoritative name server for a subdomain can poison the cache for parent domains (like `.co.uk`). In `io.netty.resolver.dns.DnsResolveContext.AuthoritativeNameServerList#add` method accepts any NS record from the AUTHORITY section as long as the record's name is a suffix of the questionName. Subsequently, the `handleWithAdditional` method caches the associated A records from the ADDITIONAL section directly into the `authoritativeDnsServerCache` under the parent domain's key. This bypasses standard bailiwick rules, where a server authoritative for a subdomain should not be trusted to provide authoritative records for its parent. The poisoned cache is then used for all future resolutions under the parent domain's key. Versions 4.1.135.Final and 4.2.15.Final patch the issue.

🎖@cveNotify

🚨 CVE-2026-48006
Netty is a network application framework for development of protocol servers and clients. Prior to versions 4.1.135.Final and 4.2.15.Final, the RedisArrayAggregator handler permanently leaks pooled direct-memory buffers when a Redis pipeline connection closes before a RESP array aggregate completes. The handler retains child messages in per-handler state (`depths` field) but defines no `channelInactive`, `handlerRemoved`, or `exceptionCaught` method to release them when the pipeline tears down. Because the leaked buffers are slices of `PooledByteBufAllocator` chunks, they prevent those chunks from being returned to the JVM-wide direct-memory pool. Repeated connection churn by any network peer monotonically drains this shared pool, eventually causing allocation failures on all Netty channels in the process. Versions 4.1.135.Final and 4.2.15.Final patch the issue.

🎖@cveNotify

🚨 CVE-2026-48043
Netty is a network application framework for development of protocol servers and clients. In netty-codec-http2 prior to versions 4.1.135.Final and 4.2.15.Final, the `DelegatingDecompressorFrameListener` class orchestrates HTTP/2 decompression by embedding a per-stream `EmbeddedChannel` that runs the appropriate decompression codec (gzip, deflate, zstd) and forwards decompressed chunks to a wrapped listener. Each decompressed chunk is a pooled `ByteBuf` handed to an anonymous `ChannelInboundHandlerAdapter` tail handler, which becomes the sole owner responsible for releasing it. A remote peer could send frames that would result in the flow-controller throwing and so trigger a resource leak which at the end might take down the whole JVM due OOME. Versions 4.1.135.Final and 4.2.15.Final patch the issue.

🎖@cveNotify

🚨 CVE-2026-48059
Netty is a network application framework for development of protocol servers and clients. Prior to versions 4.1.135.Final and 4.2.15.Final, the HAProxy PROXY protocol v2 codec in netty leaks native or heap memory on every connection when a client sends a syntactically valid header containing nested `PP2_TYPE_SSL` TLVs (type-length-value records) at depth two or greater. The leak occurs on the successful parse path — no exception is thrown, the message fires downstream, the decoder removes itself, and the application releases the `HAProxyMessage` normally. Yet the underlying cumulation buffer (a pooled, potentially direct `ByteBuf` allocated by the channel) remains permanently pinned. Versions 4.1.135.Final and 4.2.15.Final patch the issue.

🎖@cveNotify

🚨 CVE-2026-50010
Netty is a network application framework for development of protocol servers and clients. Prior to versions 4.1.135.Final and 4.2.15.Final, SimpleTrustManagerFactory.engineGetTrustManagers() and related paths wrap any user-supplied plain X509TrustManager in X509TrustManagerWrapper, which extends X509ExtendedTrustManager but implements the 3-arg checkServerTrusted(chain, authType, SSLEngine) by discarding the SSLEngine and calling the 2-arg delegate. Because the object now IS an X509ExtendedTrustManager, neither SunJSSE's internal AbstractTrustManagerWrapper nor Netty's own OpenSslX509TrustManagerWrapper will re-wrap it to add endpoint-identification. Consequently, even though Netty 4.2 sets endpointIdentificationAlgorithm="HTTPS" by default, a client built with `SslContextBuilder.forClient().trustManager(somePlainX509TrustManager)` performs no hostname verification at all. Versions 4.1.135.Final and 4.2.15.Final patch the issue.

🎖@cveNotify

🚨 CVE-2026-50011
Netty is a network application framework for development of protocol servers and clients. Prior to versions 4.1.135.Final and 4.2.15.Final, RedisArrayAggregator pre-allocates ArrayList with initial capacity equal to the RESP array element count declared in an array header. That count is taken from the wire before the corresponding child messages exist. A small malicious header can claim a huge initial capacity. Versions 4.1.135.Final and 4.2.15.Final patch the issue.

🎖@cveNotify

🚨 CVE-2026-12143
form-data is a library for creating readable multipart/form-data streams. In versions through 4.0.5, the `field` argument to `FormData#append` and the `filename` option are concatenated verbatim into the `Content-Disposition` header without escaping carriage return (CR), line feed (LF), or double-quote (") characters. An application that passes attacker-controlled data as a field name or filename (for example, an API gateway that turns JSON object keys into multipart field names) allows the attacker to terminate the header line and inject additional headers, or to smuggle entire additional multipart parts, into the request the application forwards to a backend. This can let the attacker add or override form fields (e.g. set `is_admin=true`) seen by the downstream parser. This is an instance of CWE-93 (CRLF injection). The fix escapes CR, LF, and `"` as `%0D`, `%0A`, and `%22` in field names and filenames, matching the serialization browsers use per the WHATWG HTML multipart/form-data encoding algorithm. Exploitation requires the consuming application to use untrusted input as a field name or filename; applications that use only fixed/trusted field names are not affected. Fixed in 2.5.6, 3.0.5, and 4.0.6.

🎖@cveNotify

🚨 CVE-2026-44990
ApostropheCMS is an open-source Node.js content management system, and sanitize-html provides a simple HTML sanitizer with a clear API. Under the default configuration, versions of `sanitize-html` prior to 2.17.4 can turn attacker-controlled content inside a disallowed `xmp` element into live HTML or JavaScript. This is a sanitizer bypass in the default `disallowedTagsMode: 'discard'` path and can lead to stored XSS in applications that render sanitized output back to users. Version 2.17.4 patches the issue.

🎖@cveNotify

🚨 CVE-2026-48779
ws is an open source WebSocket client and server for Node.js. All versions from 1.1.0 up to (but not including) 5.2.5, from 6.0.0 up to 6.2.4, from 7.0.0 up to 7.5.11, and from 8.0.0 up to 8.21.0 are affected by a memory exhaustion DoS vulnerability. A peer can send a high volume of exceptionally small fragments and data chunks, with modest network traffic, to force the remote peer into allocating and holding structural wrappers that consume far more memory than the default documented message-size limit, leading to process termination due to OOM. This issue has been fixed in versions 5.2.5, 6.2.4, 7.5.11, and 8.21.0.

🎖@cveNotify

🚨 CVE-2026-56208
A heap buffer overflow vulnerability was found in libaom, the reference AV1 codec implementation. A flaw in the AV1 encoder's Look-Ahead Processing (LAP) mode causes the first-pass stats ring buffer wrap-around guard to be bypassed when g_lag_in_frames is set to 1 or higher. This results in a 232-byte out-of-bounds write on every encoded frame after the second, corrupting adjacent heap objects. An attacker who can influence encoder configuration in a transcoding service or WebRTC session could exploit this to cause a denial of service (process crash) or potentially achieve code execution.

🎖@cveNotify

🚨 CVE-2026-56209
An arbitrary address write vulnerability was found in libaom, the reference AV1 codec implementation. A missing bounds check in the SVC (Scalable Video Coding) layer ID control function allows an attacker to inject an arbitrary pointer into the cyclic refresh map field via crafted image pixel values. The encoder then writes approximately 1,200 bytes at the attacker-controlled address. This is fully deterministic and does not require a separate information leak. An attacker who can supply frames to a network-facing libaom encoder with SVC enabled could exploit this for denial of service or potential code execution.

🎖@cveNotify

🚨 CVE-2026-56210
A heap-buffer-overflow read vulnerability was found in libaom, the reference AV1 codec implementation. A missing bounds check in the SVC (Scalable Video Coding) layer ID control function allows setting a spatial_layer_id exceeding the configured number of layers. This causes an out-of-bounds heap read of approximately 40,728 bytes when computing a layer context array index. An attacker who can influence SVC encoder parameters in a network-facing service could exploit this for information disclosure (heap content leak) or denial of service (segmentation fault from hitting unmapped memory).

🎖@cveNotify

🚨 CVE-2026-56211
A remote code execution vulnerability was found in libaom, the reference AV1 codec implementation. Insufficient bounds validation in the AV1 encoder's SVC (Scalable Video Coding) layer ID control allows an attacker to supply crafted video frame pixels that overlap with internal encoder layer context structures. In fork-based video processing services, an attacker can use this to hijack the cyclic refresh map pointer, brute-force the process base address via a crash oracle, and redirect control flow to achieve arbitrary command execution. Exploitation requires the target service to use libaom with SVC encoding enabled and accept attacker-supplied video frames.

🎖@cveNotify

🚨 CVE-2026-52923
In the Linux kernel, the following vulnerability has been resolved:

ipc: limit next_id allocation to the valid ID range

The checkpoint/restore sysctl path can request the next SysV IPC id
through ids->next_id. ipc_idr_alloc() currently forwards that request to
idr_alloc() with an open-ended upper bound.

If the valid tail of the SysV IPC id space is full, the allocation can
spill beyond ipc_mni. The returned SysV IPC id still uses the normal
index encoding, so later lookup and removal can target the wrong slot.
This leaves the real IDR entry behind and breaks the IDR state for the
object.

The bug is in ipc_idr_alloc() in the checkpoint/restore path.

1. ids->next_id is passed to:

idr_alloc(&ids->ipcs_idr, new, ipcid_to_idx(next_id), 0, ...)

2. The zero upper bound makes the allocation effectively open-ended.
Once the valid SysV IPC tail is occupied, idr_alloc() can spill past
ipc_mni and allocate an entry beyond the valid IPC id range.

3. The new object id is still encoded with the narrower SysV IPC index
width:

new->id = (new->seq << ipcmni_seq_shift()) + idx

4. Later removal goes through ipc_rmid(), which uses:

ipcid_to_idx(ipcp->id)

That truncates the real IDR index. An object actually stored at a
high index can then be removed as if it lived at a low in-range
index.

5. For shared memory, shm_destroy() frees the current object anyway, but
the real high IDR slot is left behind as a dangling pointer.

6. A subsequent walk of /proc/sysvipc/shm reaches the stale IDR entry
and dereferences freed memory.

Prevent this by bounding the requested allocation to ipc_mni so the
checkpoint/restore path fails once the valid range is exhausted.

🎖@cveNotify

🚨 CVE-2026-53009
In the Linux kernel, the following vulnerability has been resolved:

ice: fix double-free of tx_buf skb

If ice_tso() or ice_tx_csum() fail, the error path in
ice_xmit_frame_ring() frees the skb, but the 'first' tx_buf still points
to it and is marked as valid (ICE_TX_BUF_SKB).
'next_to_use' remains unchanged, so the potential problem will
likely fix itself when the next packet is transmitted and the tx_buf
gets overwritten. But if there is no next packet and the interface is
brought down instead, ice_clean_tx_ring() -> ice_unmap_and_free_tx_buf()
will find the tx_buf and free the skb for the second time.

The fix is to reset the tx_buf type to ICE_TX_BUF_EMPTY in the error
path, so that ice_unmap_and_free_tx_buf().
Move the initialization of 'first' up, to ensure it's already valid in
case we hit the linearization error path.

The bug was spotted by AI while I had it looking for something else.
It also proposed an initial version of the patch.

I reproduced the bug and tested the fix by adding code to inject
failures, on a build with KASAN.

I looked for similar bugs in related Intel drivers and did not find any.

🎖@cveNotify

🚨 CVE-2026-53059
In the Linux kernel, the following vulnerability has been resolved:

dm log: fix out-of-bounds write due to region_count overflow

The local variable region_count in create_log_context() is declared as
unsigned int (32-bit), but dm_sector_div_up() returns sector_t (64-bit).
When a device-mapper target has a sufficiently large ti->len with a small
region_size, the division result can exceed UINT_MAX. The truncated
value is then used to calculate bitset_size, causing clean_bits,
sync_bits, and recovering_bits to be allocated far smaller than needed
for the actual number of regions.

Subsequent log operations (log_set_bit, log_clear_bit, log_test_bit) use
region indices derived from the full untruncated region space, causing
out-of-bounds writes to kernel heap memory allocated by vmalloc.

This can be reproduced by creating a mirror target whose region_count
overflows 32 bits:

dmsetup create bigzero --table '0 8589934594 zero'
dmsetup create mymirror --table '0 8589934594 mirror \
core 2 2 nosync 2 /dev/mapper/bigzero 0 \
/dev/mapper/bigzero 0'

The status output confirms the truncation (sync_count=1 instead of
4294967297, because 0x100000001 was truncated to 1):

$ dmsetup status mymirror
0 8589934594 mirror 2 254:1 254:1 1/4294967297 ...

This leads to a kernel crash in core_in_sync:

BUG: scheduling while atomic: (udev-worker)/9150/0x00000000
RIP: 0010:core_in_sync+0x14/0x30 [dm_log]
CR2: 0000000000000008
Fixing recursive fault but reboot is needed!

Fix by widening the local region_count to sector_t and adding an
explicit overflow check before the value is assigned to lc->region_count.

🎖@cveNotify

🚨 CVE-2026-20272
As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco IOS XE Software engineering team has conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities.

The vulnerabilities tracked by CVE-2026-20272 are related to issues with improper neutralization of special elements that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-74.

🎖@cveNotify

🚨 CVE-2026-15229
The Pinpoint Booking System WordPress plugin through 2.9.9.7.1 does not validate the booking price on the server side, allowing unauthenticated users to create bookings at an arbitrary price (including zero) and, by selecting a specific payment method, obtain an instantly-approved reservation.

🎖@cveNotify

🚨 CVE-2026-11325
Description



Cloudflare was recently notified by external researchers of vulnerabilities in this archived repository, including a remote code execution issue in `src/index.ts` reachable from certain GitHub Actions workflow configurations. Successful exploitation may expose workflow secrets such as CLOUDFLARE_API_TOKEN and GITHUB_TOKEN to an attacker. Because this repository has been deprecated since 2024, Cloudflare will not be issuing patches. To remediate this issue, we recommend migrating to `cloudflare/wrangler-action` immediately. Consumers who have already migrated are not affected.




Sunset Date



The cloudflare/pages-action repository will be removed on 2026-09-18. Consumers must complete migration before 18th September to avoid CI disruption.




Affected Versions



All published versions of cloudflare/pages-action, including consumers pinned to the v1 moving tag.




Patched Versions



None. This repository will not receive further updates, including security patches.




Resolution / Migration Path
Migrate all workflows using cloudflare/pages-action to `cloudflare/wrangler-action` before 2026-09-18. Refer to the wrangler-action README for the equivalent step configuration and migration guidance.




Credit



Thanks to @agentka99 and @beg1nn3r for reporting their findings via Cloudflare's HackerOne program that informe

🎖@cveNotify

🚨 CVE-2026-15045
The Wallet System for WooCommerce WordPress plugin before 2.7.10 does not validate a user-supplied wallet amount against the customer's actual stored balance during checkout, allowing authenticated customers to arbitrarily reduce their own order total, including down to zero, and complete checkout without paying the merchant.

🎖@cveNotify