🚨 CVE-2026-68431
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: validate minimum PDU size for transform requests
The receive path applies the minimum SMB2 PDU size check only when
ProtocolId is SMB2_PROTO_NUMBER. A packet carrying
SMB2_TRANSFORM_PROTO_NUM bypasses the check even when the negotiated
dialect does not provide transform handling.
On an SMB 2.1 connection, a short transform packet therefore reaches
init_smb2_rsp_hdr(), which interprets the request as a full SMB2 header
and reads beyond the request allocation. The copied fields can then be
returned to the unauthenticated client.
Compression transforms are converted to ordinary SMB2 messages before
protocol validation. After that conversion, validate ordinary SMB2
requests against SMB2_MIN_SUPPORTED_PDU_SIZE and require encryption
transform requests to contain both a transform header and an SMB2
header. This rejects truncated requests before work allocation.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: validate minimum PDU size for transform requests
The receive path applies the minimum SMB2 PDU size check only when
ProtocolId is SMB2_PROTO_NUMBER. A packet carrying
SMB2_TRANSFORM_PROTO_NUM bypasses the check even when the negotiated
dialect does not provide transform handling.
On an SMB 2.1 connection, a short transform packet therefore reaches
init_smb2_rsp_hdr(), which interprets the request as a full SMB2 header
and reads beyond the request allocation. The copied fields can then be
returned to the unauthenticated client.
Compression transforms are converted to ordinary SMB2 messages before
protocol validation. After that conversion, validate ordinary SMB2
requests against SMB2_MIN_SUPPORTED_PDU_SIZE and require encryption
transform requests to contain both a transform header and an SMB2
header. This rejects truncated requests before work allocation.
🎖@cveNotify
🚨 CVE-2026-68432
In the Linux kernel, the following vulnerability has been resolved:
vxlan: require CAP_NET_ADMIN in the device netns for changelink
A tunnel changelink() operates on at most two netns, dev_net(dev) and
the sticky underlay netns vxlan->net. They differ once the device is
created in or moved to a netns other than the one the request runs in.
The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev),
so a caller privileged there but not in vxlan->net can rewrite a vxlan
device whose underlay lives in vxlan->net.
vxlan_changelink() validates and applies the new configuration against
vxlan->net (vxlan_config_validate(vxlan->net, ...)) and can reopen the
underlay socket in that netns, so the same reasoning as the tunnel
changelink series applies here.
Gate vxlan_changelink() with rtnl_dev_link_net_capable(), at the top of
the op before any attribute is parsed, matching ipgre_changelink() and
the rest of the "require CAP_NET_ADMIN in the device netns for
changelink" series.
Found by 0sec automated security-research tooling (https://0sec.ai).
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
vxlan: require CAP_NET_ADMIN in the device netns for changelink
A tunnel changelink() operates on at most two netns, dev_net(dev) and
the sticky underlay netns vxlan->net. They differ once the device is
created in or moved to a netns other than the one the request runs in.
The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev),
so a caller privileged there but not in vxlan->net can rewrite a vxlan
device whose underlay lives in vxlan->net.
vxlan_changelink() validates and applies the new configuration against
vxlan->net (vxlan_config_validate(vxlan->net, ...)) and can reopen the
underlay socket in that netns, so the same reasoning as the tunnel
changelink series applies here.
Gate vxlan_changelink() with rtnl_dev_link_net_capable(), at the top of
the op before any attribute is parsed, matching ipgre_changelink() and
the rest of the "require CAP_NET_ADMIN in the device netns for
changelink" series.
Found by 0sec automated security-research tooling (https://0sec.ai).
🎖@cveNotify
🚨 CVE-2026-68433
In the Linux kernel, the following vulnerability has been resolved:
libceph: bound get_version reply decode to front len
handle_get_version_reply() uses msg->front_alloc_len as the decode
boundary for MON_GET_VERSION_REPLY. That is the size of the reused
reply buffer, not the number of bytes actually received.
A truncated reply can therefore pass ceph_decode_need() and decode the
second u64 from stale tail bytes left in the buffer by an earlier
message, causing an uninitialized memory read.
Use msg->front.iov_len as the receive-side decode boundary, matching
other libceph reply handlers and limiting decoding to the bytes that
were actually read from the wire.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
libceph: bound get_version reply decode to front len
handle_get_version_reply() uses msg->front_alloc_len as the decode
boundary for MON_GET_VERSION_REPLY. That is the size of the reused
reply buffer, not the number of bytes actually received.
A truncated reply can therefore pass ceph_decode_need() and decode the
second u64 from stale tail bytes left in the buffer by an earlier
message, causing an uninitialized memory read.
Use msg->front.iov_len as the receive-side decode boundary, matching
other libceph reply handlers and limiting decoding to the bytes that
were actually read from the wire.
🎖@cveNotify
🚨 CVE-2026-68434
In the Linux kernel, the following vulnerability has been resolved:
serial: 8250_mid: Fix NULL function pointer dereference on DNV/ICX-D/SNR platforms
Commit b1b4efea05a5 ("serial: 8250_mid: Disable DMA for selected
platforms") replaced the dnv_board setup and exit callbacks with
PTR_IF(false, ...), which evaluates to NULL. However, the three call
sites in mid8250_probe() and mid8250_remove() unconditionally
dereference these function pointers without NULL checks, causing a NULL
pointer dereference (kernel oops) on any Denverton (DNV), Ice Lake Xeon
D (ICX-D/CDF), or Snowridge (SNR) platform.
Fix this by adding the missing NULL checks before calling the setup and
exit callbacks.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
serial: 8250_mid: Fix NULL function pointer dereference on DNV/ICX-D/SNR platforms
Commit b1b4efea05a5 ("serial: 8250_mid: Disable DMA for selected
platforms") replaced the dnv_board setup and exit callbacks with
PTR_IF(false, ...), which evaluates to NULL. However, the three call
sites in mid8250_probe() and mid8250_remove() unconditionally
dereference these function pointers without NULL checks, causing a NULL
pointer dereference (kernel oops) on any Denverton (DNV), Ice Lake Xeon
D (ICX-D/CDF), or Snowridge (SNR) platform.
Fix this by adding the missing NULL checks before calling the setup and
exit callbacks.
🎖@cveNotify
🚨 CVE-2026-68435
In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Fix address space mismatch in kexec command line lookup
When searching the loaded segments for the "kexec" command line marker,
the kexec_load(2) path (file_mode == 0) passes the user-space segment
buffer straight to strncmp() through a bogus (char __user *) cast. This
dereferences a user pointer in kernel context, which is wrong and is
flagged by sparse:
arch/loongarch/kernel/machine_kexec.c:84:51: sparse: incorrect type in
argument 2 (different address spaces) @@ expected char const * @@ got
char [noderef] __user *
Here copy the marker-sized prefix of each segment into a small on-stack
buffer with copy_from_user() before comparing, and skip segments that
fault. The subsequent copy_from_user() that stages the full command line
into the safe area is left unchanged.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Fix address space mismatch in kexec command line lookup
When searching the loaded segments for the "kexec" command line marker,
the kexec_load(2) path (file_mode == 0) passes the user-space segment
buffer straight to strncmp() through a bogus (char __user *) cast. This
dereferences a user pointer in kernel context, which is wrong and is
flagged by sparse:
arch/loongarch/kernel/machine_kexec.c:84:51: sparse: incorrect type in
argument 2 (different address spaces) @@ expected char const * @@ got
char [noderef] __user *
Here copy the marker-sized prefix of each segment into a small on-stack
buffer with copy_from_user() before comparing, and skip segments that
fault. The subsequent copy_from_user() that stages the full command line
into the safe area is left unchanged.
🎖@cveNotify
🚨 CVE-2026-68436
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: use kvzalloc to allocate struct dc
struct dc has grown large over time (most of it the two inlined
dc_scratch_space copies) and now sits close to the page allocator's 4 MiB
contiguous allocation limit. Its actual size is not fixed by the source
alone, it also depends on the compiler and the .config, so it can easily
cross 4 MiB, e.g. with a newer GCC or a config change.
dc_create() allocates it with kzalloc(). Once struct dc exceeds 4 MiB the
request is rounded up to order 11 (8 MiB), which is above MAX_PAGE_ORDER,
so the page allocator warns and returns NULL. dc_create() then fails, DM
init fails and amdgpu probe aborts with -EINVAL:
WARNING: mm/page_alloc.c:5197 at __alloc_frozen_pages_noprof+0x2f9/0x380
dc_create+0x38/0x660 [amdgpu]
amdgpu_dm_init+0x2d9/0x510 [amdgpu]
dm_hw_init+0x1b/0x90 [amdgpu]
amdgpu_device_init.cold+0x150d/0x1e13 [amdgpu]
amdgpu_driver_load_kms+0x19/0x80 [amdgpu]
amdgpu_pci_probe+0x1e2/0x4c0 [amdgpu]
dc_create() then returns NULL and DM init fails, which aborts the whole
GPU init and makes amdgpu probe fail with -EINVAL ("hw_init of IP block
<dm> failed -22"), leaving the display unusable. The subsequent
amdgpu_irq_put() warnings during teardown are just fallout of unwinding
a half-initialized device.
struct dc is a software-only bookkeeping structure that is never handed
to hardware DMA and is only ever kept as an opaque pointer, so it does
not require physically contiguous memory. Allocate it with kvzalloc()
(and free it with kvfree()) so that the allocator can fall back to
vmalloc() when a contiguous allocation of that size is not available,
which also avoids the MAX_PAGE_ORDER warning entirely.
v2:
- Rebase to amd-staging-drm-next.
(cherry picked from commit 991e0516a8072f2292681c6ae98a924ab0e32575)
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: use kvzalloc to allocate struct dc
struct dc has grown large over time (most of it the two inlined
dc_scratch_space copies) and now sits close to the page allocator's 4 MiB
contiguous allocation limit. Its actual size is not fixed by the source
alone, it also depends on the compiler and the .config, so it can easily
cross 4 MiB, e.g. with a newer GCC or a config change.
dc_create() allocates it with kzalloc(). Once struct dc exceeds 4 MiB the
request is rounded up to order 11 (8 MiB), which is above MAX_PAGE_ORDER,
so the page allocator warns and returns NULL. dc_create() then fails, DM
init fails and amdgpu probe aborts with -EINVAL:
WARNING: mm/page_alloc.c:5197 at __alloc_frozen_pages_noprof+0x2f9/0x380
dc_create+0x38/0x660 [amdgpu]
amdgpu_dm_init+0x2d9/0x510 [amdgpu]
dm_hw_init+0x1b/0x90 [amdgpu]
amdgpu_device_init.cold+0x150d/0x1e13 [amdgpu]
amdgpu_driver_load_kms+0x19/0x80 [amdgpu]
amdgpu_pci_probe+0x1e2/0x4c0 [amdgpu]
dc_create() then returns NULL and DM init fails, which aborts the whole
GPU init and makes amdgpu probe fail with -EINVAL ("hw_init of IP block
<dm> failed -22"), leaving the display unusable. The subsequent
amdgpu_irq_put() warnings during teardown are just fallout of unwinding
a half-initialized device.
struct dc is a software-only bookkeeping structure that is never handed
to hardware DMA and is only ever kept as an opaque pointer, so it does
not require physically contiguous memory. Allocate it with kvzalloc()
(and free it with kvfree()) so that the allocator can fall back to
vmalloc() when a contiguous allocation of that size is not available,
which also avoids the MAX_PAGE_ORDER warning entirely.
v2:
- Rebase to amd-staging-drm-next.
(cherry picked from commit 991e0516a8072f2292681c6ae98a924ab0e32575)
🎖@cveNotify
🚨 CVE-2026-68437
In the Linux kernel, the following vulnerability has been resolved:
drm/imagination: Fit paired fragment job in the correct CCCB
For geometry jobs with a paired fragment job, at the moment, the
DRM scheduler's prepare_job() callback:
- checks for internal (driver) dependencies for the geometry job;
- calls into pvr_queue_get_paired_frag_job_dep() to check for external
dependencies for the fragment job (the two jobs are submitted together
but the common scheduler code doesn't know about it, so this needs to
be done at this point in time);
- calls into the prepare_job() callback again, but for the fragment job,
to check its internal dependencies as well, passing the fragment job's
drm_sched_job and the geometry job's drm_sched_entity / pvr_queue.
The problem with the last step is that pvr_queue_prepare_job() doesn't
always take the mismatched fragment job and geometry queue into account,
in particular when checking whether there is space for the fragment
command to be submitted, so the code ends up checking for space in the
geometry (i.e. wrong) CCCB.
The rest of the nested prepare_job() callback happens to work fine at
the moment as the other internal dependencies are not relevant for a
paired fragment job.
Move the initialisation of a paired fragment job's done fence and CCCB
fence to pvr_queue_get_paired_frag_job_dep(), inferring the correct
queue from the fragment job itself.
This fixes cases where prepare_job() wrongly assumed that there was
enough space for a paired fragment job in its own CCCB, unblocking
run_job(), which then returned early without writing the full sequence
of commands to the CCCB.
The above lead to kernel warnings such as the following and potentially
job timeouts (depending on waiters on the missing commands):
[ 552.421075] WARNING: drivers/gpu/drm/imagination/pvr_cccb.c:178 at pvr_cccb_write_command_with_header+0x2c4/0x330 [powervr], CPU#2: kworker/u16:5/63
[ 552.421230] Modules linked in:
[ 552.421592] CPU: 2 UID: 0 PID: 63 Comm: kworker/u16:5 Tainted: G W 7.0.0-rc2-gc5d053e4dccb #39 PREEMPT
[ 552.421625] Tainted: [W]=WARN
[ 552.421637] Hardware name: Texas Instruments AM625 SK (DT)
[ 552.421655] Workqueue: powervr-sched drm_sched_run_job_work [gpu_sched]
[ 552.421744] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 552.421766] pc : pvr_cccb_write_command_with_header+0x2c4/0x330 [powervr]
[ 552.421850] lr : pvr_queue_submit_job_to_cccb+0x57c/0xa74 [powervr]
[ 552.421923] sp : ffff800084c47650
[ 552.421936] x29: ffff800084c47740 x28: 0000000000000df8 x27: ffff800088a77000
[ 552.421979] x26: 0000000000000030 x25: ffff800084c47680 x24: 0000000000001000
[ 552.422017] x23: ffff800084c47820 x22: 1ffff00010988ecc x21: 0000000000000008
[ 552.422055] x20: 0000000000000208 x19: ffff000006ad5a88 x18: 0000000000000000
[ 552.422093] x17: 0000000020020000 x16: 0000000000020000 x15: 0000000000000000
[ 552.422130] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
[ 552.422167] x11: 000000000000f2f2 x10: 00000000f3000000 x9 : 00000000f3f3f3f3
[ 552.422204] x8 : 00000000f2f2f200 x7 : ffff700010988ecc x6 : 0000000000000008
[ 552.422241] x5 : 0000000000000000 x4 : 1ffff0001114ee00 x3 : 0000000000000000
[ 552.422278] x2 : 0000000000000007 x1 : 0000000000000fff x0 : 000000000000002f
[ 552.422316] Call trace:
[ 552.422330] pvr_cccb_write_command_with_header+0x2c4/0x330 [powervr] (P)
[ 552.422411] pvr_queue_submit_job_to_cccb+0x57c/0xa74 [powervr]
[ 552.422486] pvr_queue_run_job+0x3a4/0x990 [powervr]
[ 552.422562] drm_sched_run_job_work+0x580/0xd48 [gpu_sched]
[ 552.422623] process_one_work+0x520/0x1288
[ 552.422657] worker_thread+0x3f0/0xb3c
[ 552.422679] kthread+0x334/0x3d8
[ 552.422706] ret_from_fork+0x10/0x20
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
drm/imagination: Fit paired fragment job in the correct CCCB
For geometry jobs with a paired fragment job, at the moment, the
DRM scheduler's prepare_job() callback:
- checks for internal (driver) dependencies for the geometry job;
- calls into pvr_queue_get_paired_frag_job_dep() to check for external
dependencies for the fragment job (the two jobs are submitted together
but the common scheduler code doesn't know about it, so this needs to
be done at this point in time);
- calls into the prepare_job() callback again, but for the fragment job,
to check its internal dependencies as well, passing the fragment job's
drm_sched_job and the geometry job's drm_sched_entity / pvr_queue.
The problem with the last step is that pvr_queue_prepare_job() doesn't
always take the mismatched fragment job and geometry queue into account,
in particular when checking whether there is space for the fragment
command to be submitted, so the code ends up checking for space in the
geometry (i.e. wrong) CCCB.
The rest of the nested prepare_job() callback happens to work fine at
the moment as the other internal dependencies are not relevant for a
paired fragment job.
Move the initialisation of a paired fragment job's done fence and CCCB
fence to pvr_queue_get_paired_frag_job_dep(), inferring the correct
queue from the fragment job itself.
This fixes cases where prepare_job() wrongly assumed that there was
enough space for a paired fragment job in its own CCCB, unblocking
run_job(), which then returned early without writing the full sequence
of commands to the CCCB.
The above lead to kernel warnings such as the following and potentially
job timeouts (depending on waiters on the missing commands):
[ 552.421075] WARNING: drivers/gpu/drm/imagination/pvr_cccb.c:178 at pvr_cccb_write_command_with_header+0x2c4/0x330 [powervr], CPU#2: kworker/u16:5/63
[ 552.421230] Modules linked in:
[ 552.421592] CPU: 2 UID: 0 PID: 63 Comm: kworker/u16:5 Tainted: G W 7.0.0-rc2-gc5d053e4dccb #39 PREEMPT
[ 552.421625] Tainted: [W]=WARN
[ 552.421637] Hardware name: Texas Instruments AM625 SK (DT)
[ 552.421655] Workqueue: powervr-sched drm_sched_run_job_work [gpu_sched]
[ 552.421744] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 552.421766] pc : pvr_cccb_write_command_with_header+0x2c4/0x330 [powervr]
[ 552.421850] lr : pvr_queue_submit_job_to_cccb+0x57c/0xa74 [powervr]
[ 552.421923] sp : ffff800084c47650
[ 552.421936] x29: ffff800084c47740 x28: 0000000000000df8 x27: ffff800088a77000
[ 552.421979] x26: 0000000000000030 x25: ffff800084c47680 x24: 0000000000001000
[ 552.422017] x23: ffff800084c47820 x22: 1ffff00010988ecc x21: 0000000000000008
[ 552.422055] x20: 0000000000000208 x19: ffff000006ad5a88 x18: 0000000000000000
[ 552.422093] x17: 0000000020020000 x16: 0000000000020000 x15: 0000000000000000
[ 552.422130] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
[ 552.422167] x11: 000000000000f2f2 x10: 00000000f3000000 x9 : 00000000f3f3f3f3
[ 552.422204] x8 : 00000000f2f2f200 x7 : ffff700010988ecc x6 : 0000000000000008
[ 552.422241] x5 : 0000000000000000 x4 : 1ffff0001114ee00 x3 : 0000000000000000
[ 552.422278] x2 : 0000000000000007 x1 : 0000000000000fff x0 : 000000000000002f
[ 552.422316] Call trace:
[ 552.422330] pvr_cccb_write_command_with_header+0x2c4/0x330 [powervr] (P)
[ 552.422411] pvr_queue_submit_job_to_cccb+0x57c/0xa74 [powervr]
[ 552.422486] pvr_queue_run_job+0x3a4/0x990 [powervr]
[ 552.422562] drm_sched_run_job_work+0x580/0xd48 [gpu_sched]
[ 552.422623] process_one_work+0x520/0x1288
[ 552.422657] worker_thread+0x3f0/0xb3c
[ 552.422679] kthread+0x334/0x3d8
[ 552.422706] ret_from_fork+0x10/0x20
🎖@cveNotify
🚨 CVE-2026-68438
In the Linux kernel, the following vulnerability has been resolved:
smp: Make CSD lock acquisition atomic for debug mode
Commit b0473dcd4b1d ("smp: Improve smp_call_function_single()
CSD-lock diagnostics") changed smp_call_function_single() so that,
when CSD lock debugging is enabled, async !wait calls use the
destination CPU csd_data. That improves diagnostics, but it also removes
the single-writer property that made the old csd_lock() safe: multiple
CPUs can now prepare the same destination CPU CSD concurrently.
csd_lock() currently waits for CSD_FLAG_LOCK to clear and then sets the
bit with a non-atomic read-modify-write. Two senders can both see an
unlocked CSD, set the bit, overwrite the callback fields, and enqueue
the same llist node. Re-adding a node that is already the queue head can
make node->next point to itself, leaving the target CPU stuck walking
call_single_queue. Later synchronous work, such as a TLB shootdown, can
then remain queued and trigger soft-lockup warnings or panics.
Keep the single csd_lock() implementation, but when CSD lock debugging is
enabled, acquire CSD_FLAG_LOCK with try_cmpxchg_acquire(). This makes the
destination CPU CSD a real atomic lock in the only configuration where it
can be shared by multiple remote senders, while preserving the existing
non-debug fast path.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
smp: Make CSD lock acquisition atomic for debug mode
Commit b0473dcd4b1d ("smp: Improve smp_call_function_single()
CSD-lock diagnostics") changed smp_call_function_single() so that,
when CSD lock debugging is enabled, async !wait calls use the
destination CPU csd_data. That improves diagnostics, but it also removes
the single-writer property that made the old csd_lock() safe: multiple
CPUs can now prepare the same destination CPU CSD concurrently.
csd_lock() currently waits for CSD_FLAG_LOCK to clear and then sets the
bit with a non-atomic read-modify-write. Two senders can both see an
unlocked CSD, set the bit, overwrite the callback fields, and enqueue
the same llist node. Re-adding a node that is already the queue head can
make node->next point to itself, leaving the target CPU stuck walking
call_single_queue. Later synchronous work, such as a TLB shootdown, can
then remain queued and trigger soft-lockup warnings or panics.
Keep the single csd_lock() implementation, but when CSD lock debugging is
enabled, acquire CSD_FLAG_LOCK with try_cmpxchg_acquire(). This makes the
destination CPU CSD a real atomic lock in the only configuration where it
can be shared by multiple remote senders, while preserving the existing
non-debug fast path.
🎖@cveNotify
🚨 CVE-2026-68439
In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7925: fix possible NULL-pointer deref in mt7925_mcu_bss_he_tlv()
mt76_connac_get_he_phy_cap routine can theoretically return NULL so
check cap pointer before dereferencing it.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7925: fix possible NULL-pointer deref in mt7925_mcu_bss_he_tlv()
mt76_connac_get_he_phy_cap routine can theoretically return NULL so
check cap pointer before dereferencing it.
🎖@cveNotify
🚨 CVE-2026-68440
In the Linux kernel, the following vulnerability has been resolved:
net: txgbe: fix heap overflow when reading module EEPROM
txgbe_read_eeprom_hostif() always copies round_up(length, 4) bytes
into the caller buffer, which ethtool allocates with exactly 'length'
bytes. A non-4-aligned length therefore causes an out-of-bounds write.
Copy only the remaining bytes on the final dword instead.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
net: txgbe: fix heap overflow when reading module EEPROM
txgbe_read_eeprom_hostif() always copies round_up(length, 4) bytes
into the caller buffer, which ethtool allocates with exactly 'length'
bytes. A non-4-aligned length therefore causes an out-of-bounds write.
Copy only the remaining bytes on the final dword instead.
🎖@cveNotify
🚨 CVE-2026-68441
In the Linux kernel, the following vulnerability has been resolved:
net/sched: Handle TC_ACT_REDIRECT from qdisc filter chains
When a TC filter attached to a qdisc filter chain returns
TC_ACT_REDIRECT (ex: via an eBPF program calling bpf_redirect() or an
act_bpf action), the redirect was silently lost i.e no qdisc classify
function handled TC_ACT_REDIRECT, so the packet fell through the
switch and was enqueued normally instead of being redirected.
This has been broken since bpf_redirect() was introduced for TC in
commit 27b29f63058d ("bpf: add bpf_redirect() helper"). We got lucky
for a long time because bpf_net_context was a per-CPU variable that
was always available.
commit 401cb7dae813 ("net: Reference bpf_redirect_info via task_struct
on PREEMPT_RT.") turned bpf_net_context into a task_struct member that
is only set up by explicit callers. Without a caller setting it up,
bpf_redirect() itself crashes with a NULL pointer dereference in
bpf_net_ctx_get_ri(). However, even with bpf_net_context available,
TC_ACT_REDIRECT from qdisc filter chains cannot be honored without
adding skb_do_redirect() calls to every qdisc classify function, which
would require changes across net/sched/. Isolate it to ebpf core where
it belongs.
Instead, add a tcf_classify_qdisc() inline helper in pkt_cls.h, as a
wrapper around tcf_classify() for use by qdisc classify functions and
tcf_qevent_handle(). When the classify verdict is TC_ACT_REDIRECT,
the wrapper converts it to TC_ACT_SHOT, dropping the packet rather
than letting it continue silently. Dropping is preferred over
letting the packet through because the user immediately sees packet
loss. Silently passing the packet through would hide the problem and
leave the user wondering why their redirect is not working.
The clsact fast path, tc_run() continues to call tcf_classify() directly
and is unaffected: TC_ACT_REDIRECT is returned as-is and handled by
sch_handle_egress/ingress() calling skb_do_redirect() as before.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
net/sched: Handle TC_ACT_REDIRECT from qdisc filter chains
When a TC filter attached to a qdisc filter chain returns
TC_ACT_REDIRECT (ex: via an eBPF program calling bpf_redirect() or an
act_bpf action), the redirect was silently lost i.e no qdisc classify
function handled TC_ACT_REDIRECT, so the packet fell through the
switch and was enqueued normally instead of being redirected.
This has been broken since bpf_redirect() was introduced for TC in
commit 27b29f63058d ("bpf: add bpf_redirect() helper"). We got lucky
for a long time because bpf_net_context was a per-CPU variable that
was always available.
commit 401cb7dae813 ("net: Reference bpf_redirect_info via task_struct
on PREEMPT_RT.") turned bpf_net_context into a task_struct member that
is only set up by explicit callers. Without a caller setting it up,
bpf_redirect() itself crashes with a NULL pointer dereference in
bpf_net_ctx_get_ri(). However, even with bpf_net_context available,
TC_ACT_REDIRECT from qdisc filter chains cannot be honored without
adding skb_do_redirect() calls to every qdisc classify function, which
would require changes across net/sched/. Isolate it to ebpf core where
it belongs.
Instead, add a tcf_classify_qdisc() inline helper in pkt_cls.h, as a
wrapper around tcf_classify() for use by qdisc classify functions and
tcf_qevent_handle(). When the classify verdict is TC_ACT_REDIRECT,
the wrapper converts it to TC_ACT_SHOT, dropping the packet rather
than letting it continue silently. Dropping is preferred over
letting the packet through because the user immediately sees packet
loss. Silently passing the packet through would hide the problem and
leave the user wondering why their redirect is not working.
The clsact fast path, tc_run() continues to call tcf_classify() directly
and is unaffected: TC_ACT_REDIRECT is returned as-is and handled by
sch_handle_egress/ingress() calling skb_do_redirect() as before.
🎖@cveNotify
🚨 CVE-2026-68442
In the Linux kernel, the following vulnerability has been resolved:
btrfs: don't propagate EXTENT_FLAG_LOGGING to split extent maps
When btrfs_drop_extent_map_range() splits an extent map, the new split
maps inherit the original map's flags through a local 'flags' variable.
Commit f86f7a75e2fb ("btrfs: use the flags of an extent map to identify
the compression type") changed the EXTENT_FLAG_LOGGING clearing to
operate on em->flags instead of that local 'flags' copy, so a split of
an extent map that is currently being logged wrongly inherits
EXTENT_FLAG_LOGGING.
The flag is then never cleared on the split, and when it is freed while
still on the inode's modified_extents list (for example by the extent
map shrinker) it trips the WARN_ON(!list_empty(&em->list)) in
btrfs_free_extent_map() and leads to a use-after-free.
Clear EXTENT_FLAG_LOGGING from the local 'flags' copy used for the
splits and only clear EXTENT_FLAG_PINNED from em->flags, restoring the
behaviour prior to f86f7a75e2fb.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
btrfs: don't propagate EXTENT_FLAG_LOGGING to split extent maps
When btrfs_drop_extent_map_range() splits an extent map, the new split
maps inherit the original map's flags through a local 'flags' variable.
Commit f86f7a75e2fb ("btrfs: use the flags of an extent map to identify
the compression type") changed the EXTENT_FLAG_LOGGING clearing to
operate on em->flags instead of that local 'flags' copy, so a split of
an extent map that is currently being logged wrongly inherits
EXTENT_FLAG_LOGGING.
The flag is then never cleared on the split, and when it is freed while
still on the inode's modified_extents list (for example by the extent
map shrinker) it trips the WARN_ON(!list_empty(&em->list)) in
btrfs_free_extent_map() and leads to a use-after-free.
Clear EXTENT_FLAG_LOGGING from the local 'flags' copy used for the
splits and only clear EXTENT_FLAG_PINNED from em->flags, restoring the
behaviour prior to f86f7a75e2fb.
🎖@cveNotify
🚨 CVE-2026-68443
In the Linux kernel, the following vulnerability has been resolved:
hwmon: (gigabyte_waterforce) Stop device IO before calling hid_hw_stop
Calling hid_hw_stop() does not stop the device IO.
This results in a race condition between hid_input_report() and the point
immediately following the execution of hid_device_io_start() within
the driver probe function. If the probe operation fails after "io start"
has been initiated, this race condition will result in a UAF vulnerability.
Fix the problem by calling hid_device_io_stop() before calling
hid_hw_stop().
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
hwmon: (gigabyte_waterforce) Stop device IO before calling hid_hw_stop
Calling hid_hw_stop() does not stop the device IO.
This results in a race condition between hid_input_report() and the point
immediately following the execution of hid_device_io_start() within
the driver probe function. If the probe operation fails after "io start"
has been initiated, this race condition will result in a UAF vulnerability.
Fix the problem by calling hid_device_io_stop() before calling
hid_hw_stop().
🎖@cveNotify
🚨 CVE-2026-68445
In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: Prevent shader BO mappings from becoming writable
vc4_gem_object_mmap() rejects a writable mapping of a validated shader
BO, but leaves VM_MAYWRITE set. Userspace can map the BO read-only and
then turn it writable with mprotect().
Validated shader BOs must stay read-only: the validator checks the
instructions once and the GPU trusts them afterwards. A writable
mapping lets userspace rewrite the code after validation, bypassing the
validator.
Clear VM_MAYWRITE on the read-only path so the mapping cannot be
upgraded, as i915 already does for its read-only objects.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: Prevent shader BO mappings from becoming writable
vc4_gem_object_mmap() rejects a writable mapping of a validated shader
BO, but leaves VM_MAYWRITE set. Userspace can map the BO read-only and
then turn it writable with mprotect().
Validated shader BOs must stay read-only: the validator checks the
instructions once and the GPU trusts them afterwards. A writable
mapping lets userspace rewrite the code after validation, bypassing the
validator.
Clear VM_MAYWRITE on the read-only path so the mapping cannot be
upgraded, as i915 already does for its read-only objects.
🎖@cveNotify
🚨 CVE-2026-68446
In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: Validate vmw_surface_metadata::array_size
This field comes from userspace and should be validated against specific
limits depending on which Shader Model (SM) is available.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: Validate vmw_surface_metadata::array_size
This field comes from userspace and should be validated against specific
limits depending on which Shader Model (SM) is available.
🎖@cveNotify
🚨 CVE-2026-7210
`xml.parsers.expat` and `xml.etree.ElementTree` use insufficient entropy for Expat hash-flooding protection, which allows a crafted XML document to trigger hash flooding.\r\n\r\nFully mitigating this vulnerability requires both updating libexpat to 2.8.0 or later and applying this patch.
🎖@cveNotify
`xml.parsers.expat` and `xml.etree.ElementTree` use insufficient entropy for Expat hash-flooding protection, which allows a crafted XML document to trigger hash flooding.\r\n\r\nFully mitigating this vulnerability requires both updating libexpat to 2.8.0 or later and applying this patch.
🎖@cveNotify
GitHub
gh-149018: Use `XML_SetHashSalt16Bytes` in `pyexpat`/`_elementtree` w… · python/cpython@24b8f12
…hen possible (#149023)
🚨 CVE-2026-18503
Attacker-controlled CSV samples can trigger super-linear
regular-expression work during dialect sniffing and consume significant
CPU when applications pass unbounded input to csv.Sniffer.sniff().
🎖@cveNotify
Attacker-controlled CSV samples can trigger super-linear
regular-expression work during dialect sniffing and consume significant
CPU when applications pass unbounded input to csv.Sniffer.sniff().
🎖@cveNotify
GitHub
[3.12] gh-98820: Fix quadratic time in csv.Sniffer for quoted fields … · python/cpython@063d455
…(GH-154867) (#155166)
(cherry picked from commit b30c7fa9edd921a118f286e9f90f560777fa693b)
Co-authored-by: Miss Islington (bot) <31488909+miss-islington@users.noreply.github.com>
(cherry picked from commit b30c7fa9edd921a118f286e9f90f560777fa693b)
Co-authored-by: Miss Islington (bot) <31488909+miss-islington@users.noreply.github.com>
🚨 CVE-2024-14044
A vulnerability was identified in Open5GS up to 2.7.1. This issue affects the function pcrf_rx_aar_cb of the file src/pcrf/pcrf-rx-path.c of the component Diameter Rx Handler. The manipulation of the argument num_of_media_component/num_of_sub leads to buffer overflow. The attack can be initiated remotely. The exploit is publicly available and might be used. Upgrading to version 2.7.2 is capable of addressing this issue. The identifier of the patch is 87b4e4535c77ded627cdb6f4e4e2e3ea761f40b7. It is recommended to upgrade the affected component.
🎖@cveNotify
A vulnerability was identified in Open5GS up to 2.7.1. This issue affects the function pcrf_rx_aar_cb of the file src/pcrf/pcrf-rx-path.c of the component Diameter Rx Handler. The manipulation of the argument num_of_media_component/num_of_sub leads to buffer overflow. The attack can be initiated remotely. The exploit is publicly available and might be used. Upgrading to version 2.7.2 is capable of addressing this issue. The identifier of the patch is 87b4e4535c77ded627cdb6f4e4e2e3ea761f40b7. It is recommended to upgrade the affected component.
🎖@cveNotify
GitHub
GitHub - open5gs/open5gs: Open5GS is a C-language Open Source implementation for 5G Core and EPC, i.e. the core network of LTE/NR…
Open5GS is a C-language Open Source implementation for 5G Core and EPC, i.e. the core network of LTE/NR network (Release-19) - open5gs/open5gs
🚨 CVE-2026-68447
In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: clamp v9 CRIU control stack checkpoint copy to BO size
CRIU checkpoint copies the MQD control stack using cp_hqd_cntl_stack_size
from hardware without bounding it to the allocated BO region. If the HW
field is larger than the queue's control stack allocation, memcpy reads
past the BO into adjacent GTT memory and can leak kernel data to userspace.
Store the page-aligned control stack BO size in mqd_manager and clamp
checkpoint copies and reported checkpoint sizes to
min(cp_hqd_cntl_stack_size, mm->ctl_stack_size). Apply the same bound
for multi-XCC v9.4.3 checkpoint layout.
(cherry picked from commit 6c2abd0ec09e86c6323010673766f76050e28aa3)
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: clamp v9 CRIU control stack checkpoint copy to BO size
CRIU checkpoint copies the MQD control stack using cp_hqd_cntl_stack_size
from hardware without bounding it to the allocated BO region. If the HW
field is larger than the queue's control stack allocation, memcpy reads
past the BO into adjacent GTT memory and can leak kernel data to userspace.
Store the page-aligned control stack BO size in mqd_manager and clamp
checkpoint copies and reported checkpoint sizes to
min(cp_hqd_cntl_stack_size, mm->ctl_stack_size). Apply the same bound
for multi-XCC v9.4.3 checkpoint layout.
(cherry picked from commit 6c2abd0ec09e86c6323010673766f76050e28aa3)
🎖@cveNotify
🚨 CVE-2026-68448
In the Linux kernel, the following vulnerability has been resolved:
ovl: check access to copy_file_range source with src mounter creds
Commit 5dae222a5ff0c ("vfs: allow copy_file_range to copy across devices")
allowed filesystems that implement the copy_file_range() f_op to decide
if they want to access cross-sb copy from/to the same fs type.
The same commit added checks to verify same sb copy for filesystems that
implement ->copy_file_range() and do not support cross-sb copy at the
time, namely, to ceph, fuse and nfs.
The two remaining fs which implement ->copy_file_range(), cifs and
overlayfs started to support cross-sb copy from this time.
While overlayfs does support cross-sb copy when the two underlying files
are on the same base fs, the copy operation on the two real files from
two different overalyfs filesystems is performed with the mounter
creds of the destination overlayfs and the read permission access hook
for the source file was called with the wrong creds.
This could cause either deny of access to copy which would otherwise be
allowed (e.g. with splice) or allow read access to file which would
otherwise be denied.
Fix the latter case by explicitly verifying read access to source file
with the source overlayfs mounter creds.
The former case remains a quirk of cross-sb overlayfs copy, but
userspace could fall back to regular copy so no harm done.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
ovl: check access to copy_file_range source with src mounter creds
Commit 5dae222a5ff0c ("vfs: allow copy_file_range to copy across devices")
allowed filesystems that implement the copy_file_range() f_op to decide
if they want to access cross-sb copy from/to the same fs type.
The same commit added checks to verify same sb copy for filesystems that
implement ->copy_file_range() and do not support cross-sb copy at the
time, namely, to ceph, fuse and nfs.
The two remaining fs which implement ->copy_file_range(), cifs and
overlayfs started to support cross-sb copy from this time.
While overlayfs does support cross-sb copy when the two underlying files
are on the same base fs, the copy operation on the two real files from
two different overalyfs filesystems is performed with the mounter
creds of the destination overlayfs and the read permission access hook
for the source file was called with the wrong creds.
This could cause either deny of access to copy which would otherwise be
allowed (e.g. with splice) or allow read access to file which would
otherwise be denied.
Fix the latter case by explicitly verifying read access to source file
with the source overlayfs mounter creds.
The former case remains a quirk of cross-sb overlayfs copy, but
userspace could fall back to regular copy so no harm done.
🎖@cveNotify
❤1