🚨 CVE-2026-12003
To allow builds of Python to be run from an in-tree layout (rather than
an installed file layout), the VPATH variable is defined at build time
and used to locate certain landmarks - specifically,
Modules/setup.local. When this landmark is found relative to VPATH
relative to the executable, Python assumes it is running in a source
tree and generates a different default sys.path. This code remains in
release builds, so that release-ready builds can be built in-tree.

On Windows, since builds are written to 'PCbuild/', the value of
VPATH is set to '..\..', which results in a landmark of
'..\..\Modules\setup.local'. This path is outside the install directory
of Python, and may have different permissions, potentially allowing a
low-privilege user to create the landmark and an alternative `Lib`
folder that will be discovered by an otherwise restricted install.

Such a setup occurs with the legacy default install location for all
users (in the now superseded EXE installer), due to how Windows allows
all users to create folders in the root directory of their OS drive.

Our recommended mitigation on Windows is to migrate away from the
legacy installer and use the new [Python install
manager](https://www.python.org/downloads/latest/pymanager/) to install
for the current user. Installs where the directory two levels above the
Python installation directory have equivalent permissions are unaffected
(in general, a per-user install cannot be modified at all by other
users, removing any escalation of privilege risk, and could be directly
modified by a privileged user, making the potential tampering
irrelevant). Alternative mitigations might include preemptively creating
and restricting access to a `Modules` directory. Be aware that only 3.13
and 3.14 will receive updated legacy installers - earlier fixes are only
provided as sources.

Platforms other than Windows allow VPATH to be overridden, but as they
don't usually use a separated directory in the build for binaries, are
unlikely to have a landmark reference outside of the install directory.

The landmark detection involving VPATH is a fallback for when a more
specific landmark - .\pybuilddir.txt - is absent, and was included for
compatibility. Future releases of Python will no longer include the
fallback, and so builds will need to generate or preserve the
pybuilddir.txt file in order to work in-tree. This landmark file has
been generated on Windows since 3.11, and on other platforms for longer.

🎖@cveNotify

🚨 CVE-2026-48774
ProxySQL is a proxy for MySQL and its forks, as well as PostgreSQL. In versions 3.0.0 through 3.0.8, ProxySQL's GenAI/MCP `run_sql_readonly` tool violates its documented read-only contract for MySQL targets. The tool validates only the full input string with a substring blacklist and first-keyword allowlist, but then executes the entire SQL string on a backend connection created with `CLIENT_MULTI_STATEMENTS`. As a result, a caller can submit a read-only first statement followed by a side-effecting second statement, such as `SELECT 1; RENAME TABLE ...`. The validator accepts the payload because it starts with `SELECT` and because side-effecting MySQL statements such as `RENAME TABLE`, `SET`, `RESET`, `LOCK TABLES`, and `KILL` are not rejected by the blacklist. In a live MCP runtime test, the `/mcp/query` endpoint accepted a `run_sql_readonly` request. The MCP response reported success for the first `SELECT`, and direct backend verification showed that the table had actually been renamed. This violates the endpoint's read-only security contract and lets an MCP caller perform backend writes or administrative SQL, limited by the configured MCP target account's database privileges. Version 3.0.9 contains a fix. Other operator mitigations include: keeping MCP disabled unless required; setting a non-empty `mcp-query_endpoint_auth` token before exposing `/mcp/query`; restricting MCP listener network exposure; configuring MCP backend target credentials as database-level read-only users; and adding temporary MCP query rules to block obvious multi-statement patterns.

🎖@cveNotify

🚨 CVE-2026-11940
tarfile.extractall() with the 'data' or 'tar'
filter could be bypassed by a crafted archive where a hardlink
references a symlink stored at a deeper name than the hardlink itself. 
The extraction fallback validated the symlink at it's archived location
but recreated it at the hardlink's shallower
path, letting a relative
target the filter judged contained escape the destination directory. 
This allowed a malicious tar archive to create a symlink pointing
outside the destination, enabling out-of-destination file reads or
writes. This was an incomplete fix of CVE-2025-4330.

🎖@cveNotify

🚨 CVE-2026-0864
When using the "configparser" module to write configuration files
containing multi-line text values with carriage return characters (\r) the
resulting file could be injected with unexpected keys and values if the
attacker controls the written value.

🎖@cveNotify

🚨 CVE-2026-15308
The incremental HTML parser (html.parser.HTMLParser) allows for CPU
denial-of-service through repeated unterminated markup declarations when
processing uncontrolled data.

🎖@cveNotify

🚨 CVE-2026-58101
Crypt::OpenSSL::X509 versions before 2.1.3 for Perl allow denial of service via NULL pointer dereference.

X509V3_EXT_d2i(ext) returns NULL when an extension's DER value fails to parse. basicC, ia5string, and auth_att dereference its result without a NULL check. keyid_data also dereferences akid->keyid, which is NULL for an empty AKI SEQUENCE (DER 30 00) even when the parse succeeds.

A caller invoking an affected helper on an extension from an untrusted certificate triggers a SIGSEGV that crashes the Perl process.

🎖@cveNotify

🚨 CVE-2026-58102
Crypt::OpenSSL::X509 versions before 2.1.3 for Perl allow a heap out-of-bounds read via a long certificate extension OID in hv_exts.

When building the extension hash (via extensions(), extensions_by_long_name(), extensions_by_oid(), or has_extension_oid()), the code passes OBJ_obj2txt()'s return value as the hash-key length; because that value is the OID's full text length rather than the bytes written to the fixed-size buffer (129 bytes), an OID whose text is longer than the 129-byte buffer causes a read past the allocation, exposing adjacent heap memory as the returned hash key. extensions_by_name() uses the static shortname path and is not affected.

🎖@cveNotify

🚨 CVE-2026-15416
A flaw was identified in Argo CD, the GitOps engine used by Red Hat OpenShift GitOps, that could allow an unauthenticated attacker with network access to the Argo CD repo-server to achieve remote code execution. Under certain conditions, the attacker may then manipulate cached data to deploy malicious Kubernetes resources to managed clusters, potentially resulting in complete cluster compromise.

🎖@cveNotify

🚨 CVE-2026-20158
As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco RoomOS engineering team has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities.

The vulnerabilities tracked by CVE-2026-20158 are related to improper control of a resource through its lifetime that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-664.

🎖@cveNotify

🚨 CVE-2026-6879
`Element.findall()` and fully-consumed `Element.iterfind()` exhibit `O(n^2)` time complexity when using XPath index predicates (e.g. `[1]`, `[last()]`, `[last()-N]`) on XML documents with many same-tag siblings. `Element.find()` is only affected when the first match is near the end  of the sibling list, such as with `[last()]` or `[last()-N]`;  `.//item[1]` short-circuits after the first match.

🎖@cveNotify

🚨 CVE-2026-18207
A flaw was found in the client policy enforcement mechanism of Keycloak. The issue occurs when the system checks group membership by name instead of a unique identifier. An attacker with client management privileges could bypass security policies by joining a group with a matching name in a different part of the group hierarchy, potentially allowing them to register or update clients without following required security hardening profiles.

🎖@cveNotify

🚨 CVE-2026-16465
A maliciously crafted DWG or DXF file, when parsed through Autodesk AutoCAD, can force an Out-of-Bounds Read vulnerability. A malicious actor can leverage this vulnerability to cause a crash or disclose sensitive information.

🎖@cveNotify

🚨 CVE-2026-34265
SAP NetWeaver Application Server ABAP allows an unauthenticated attacker to exploit logical errors in DIAG protocol parsing, resulting in memory corruption. This vulnerability could potentially disclose sensitive system information or crash the system, leading to a high impact on the confidentiality, integrity, and availability of the application.

🎖@cveNotify

🚨 CVE-2026-40130
SAP SAPSPrint Service has memory corruption vulnerabilities in the handling of certain commands. An unauthenticated attacker could send specially crafted requests that trigger a buffer overflow in the affected component. This causes a temporary service interruption and automatic restart, resulting in low impact on availability but no impact on confidentiality and integrity.

🎖@cveNotify

🚨 CVE-2026-44758
SAP Manufacturing Integration and Intelligence (MII) allows an attacker with high privileges to submit specially crafted input to certain affected functionality, which is processed without sufficient validation. Successful exploitation could allow the attacker to execute arbitrary commands on the underlying operating system, resulting in high impact on confidentiality, integrity, and availability of the application.

🎖@cveNotify

🚨 CVE-2026-44762
SAP Data Services Management Console allows an overly permissive Content Security Policy (CSP) configuration and lacks certain restrictive directives, which could enable an authenticated malicious user to leverage this weakness in combination with another vulnerability to inject and execute malicious scripts within the application's context. Successful exploitation may result in a low impact on confidentiality and integrity, with no impact on the availability of the application.

🎖@cveNotify

🚨 CVE-2026-44763
SAP Manufacturing Integration and Intelligence allows a privileged attacker to exploit insufficient file path validation in certain functions using specially crafted input. Exploitation also requires a legitimate user to subsequently access the attacker-influenced content and depends on conditions outside the attacker�s control. Successful exploitation could allow files to be written outside the intended directory and affect other components, resulting in a high impact on confidentiality, integrity, and availability.

🎖@cveNotify

🚨 CVE-2026-44764
Due to a Missing Authorization Check vulnerability in SAP Manufacturing Integration and Intelligence, an unauthenticated attacker could send crafted requests to the Cost Servlet using specific parameter values. If processed by the application, these requests enable access to backend operations. Successful exploitation could allow the attacker to read, create, modify, or delete application-managed business data, resulting in a limited impact on the confidentiality, integrity, and availability of the affected system.

🎖@cveNotify

🚨 CVE-2026-58230
SAP Approuter does not sufficiently validate certain token content under specific configurations. An unauthenticated attacker could send a specially crafted token to cause sensitive credential material to be sent to an attacker-controlled destination. The attack complexity is high due to non-default preconditions required in the target environment. This results in a high impact on confidentiality and a low impact on integrity and availability.

🎖@cveNotify

🚨 CVE-2026-58235
SAP NetWeaver Application Server Java (Adobe Document Service) uses outdated open source cryptographic and data transfer libraries that contain known vulnerabilities addressed in later versions. A low-privileged authenticated attacker could potentially leverage these weaknesses against the affected component, though no specific exploit is currently known. Successful exploitation could result in low impact on confidentiality, integrity, and availability of the system.

🎖@cveNotify

🚨 CVE-2026-58236
SAP NetWeaver Application Server ABAP and ABAP Platform allow an attacker with high privileges to bypass missing security controls on an internal code path leading to operating system command execution. Successful exploitation could allow the attacker to execute OS-level commands that write to the operating system or stop the SAP system, resulting in no impact on confidentiality, low impact on integrity, and high impact on availability.

🎖@cveNotify