🚨 CVE-2026-12118
IBM webMethods Integration (on prem) 10.15, 10.11 could allow an unauthenticated remote attacker to execute arbitrary code on the system due to the deserialization of untrusted data.
🎖@cveNotify
IBM webMethods Integration (on prem) 10.15, 10.11 could allow an unauthenticated remote attacker to execute arbitrary code on the system due to the deserialization of untrusted data.
🎖@cveNotify
Ibm
Security Bulletin:IBM webMethods Integration could allow an unauthenticated remote attacker to execute arbitrary code on the system…
WmServiceMock is bundled with IBM webMethods Integration Server. Remediation steps are provided below (CVE-2026-12118)
🚨 CVE-2026-12733
IBM DataPower Gateway could allow a remote attacker to cause a denial of service due to improper resource limitations.
🎖@cveNotify
IBM DataPower Gateway could allow a remote attacker to cause a denial of service due to improper resource limitations.
🎖@cveNotify
🚨 CVE-2026-12943
IBM HMC V10.3.1050.0 through 10.3.1064.0 and IBM HMC V11.1.1110.0 through 11.1.1112.0 Management systems in IBM Power environments (HMC and Novalink) could allow an unauthenticated user to execute arbitrary commands with elevated privileges on the system due to improper validation of user supplied input.
🎖@cveNotify
IBM HMC V10.3.1050.0 through 10.3.1064.0 and IBM HMC V11.1.1110.0 through 11.1.1112.0 Management systems in IBM Power environments (HMC and Novalink) could allow an unauthenticated user to execute arbitrary commands with elevated privileges on the system due to improper validation of user supplied input.
🎖@cveNotify
Ibm
Security Bulletin: This Power Hardware Management Console update is being released to address CVE-2026-12943
Vulnerability in Power Hardware Management Console (HMC) could allow an unauthenticated attacker to gain elevated privileges and execute arbitrary commands. HMC has addressed the applicable CVE.
🚨 CVE-2026-18140
Uncontrolled recursion in the unknown-key skip path of the aws-smithy-json runtime crate before 0.62.7, which the smithy-rs code generator invokes from every generated struct deserializer, might allow remote unauthenticated users to cause a denial of service (process abort via stack exhaustion) via a single small HTTP request containing deeply nested JSON to a smithy-rs generated server.
To remediate this issue, users should upgrade to aws-smithy-json 0.62.7 or later and rebuild.
🎖@cveNotify
Uncontrolled recursion in the unknown-key skip path of the aws-smithy-json runtime crate before 0.62.7, which the smithy-rs code generator invokes from every generated struct deserializer, might allow remote unauthenticated users to cause a denial of service (process abort via stack exhaustion) via a single small HTTP request containing deeply nested JSON to a smithy-rs generated server.
To remediate this issue, users should upgrade to aws-smithy-json 0.62.7 or later and rebuild.
🎖@cveNotify
🚨 CVE-2026-18245
Improper control of code generation in Amazon @aws-amplify/codegen-ui-react before 2.20.6 might allow a remote authenticated user to execute arbitrary code in end-user browsers, developer machines, CI/CD environments, and server-side rendering contexts via crafted Studio component or theme schema values due to insufficient coverage and effectiveness of the input validation introduced for CVE-2025-4318.
To remediate this issue, users should upgrade to version 2.20.6
🎖@cveNotify
Improper control of code generation in Amazon @aws-amplify/codegen-ui-react before 2.20.6 might allow a remote authenticated user to execute arbitrary code in end-user browsers, developer machines, CI/CD environments, and server-side rendering contexts via crafted Studio component or theme schema values due to insufficient coverage and effectiveness of the input validation introduced for CVE-2025-4318.
To remediate this issue, users should upgrade to version 2.20.6
🎖@cveNotify
🚨 CVE-2026-10569
IBM UCD - IBM UrbanCode Deploy 7.2 through 7.2.3.23, and 7.3 through 7.3.2.18 and IBM UCD - IBM DevOps Deploy 8.0 through 8.0.1.13, 8.1 through 8.1.2.6, and 8.2 through 8.2.1.0 is susceptible to an Exposure of Sensitive Information Vulnerability in plugin output logs. This exposure could allow an attacker with access to the logs to potentially obtain senstive values related to that step.
🎖@cveNotify
IBM UCD - IBM UrbanCode Deploy 7.2 through 7.2.3.23, and 7.3 through 7.3.2.18 and IBM UCD - IBM DevOps Deploy 8.0 through 8.0.1.13, 8.1 through 8.1.2.6, and 8.2 through 8.2.1.0 is susceptible to an Exposure of Sensitive Information Vulnerability in plugin output logs. This exposure could allow an attacker with access to the logs to potentially obtain senstive values related to that step.
🎖@cveNotify
Ibm
Security Bulletin: IBM DevOps Deploy / IBM UrbanCode Deploy (UCD) is susceptible to an Exposure of Sensitive Information Vulnerability…
IBM DevOps Deploy / IBM UrbanCode Deploy (UCD) is susceptible to an Exposure of Sensitive Information Vulnerability in plugin output logs. This exposure could allow an attacker with access to the logs to potentially obtain senstive values related to that…
🚨 CVE-2026-21662
Unrestricted upload of file with dangerous type vulnerability in Johnson Controls FM Systems Employee allows Using Malicious Files.
This issue affects FM Systems Employee: before 2025.3.1.
🎖@cveNotify
Unrestricted upload of file with dangerous type vulnerability in Johnson Controls FM Systems Employee allows Using Malicious Files.
This issue affects FM Systems Employee: before 2025.3.1.
🎖@cveNotify
Johnsoncontrols
Security Advisories
Check out the listed Security Advisories (SA) about identified security vulnerabilities in Johnson Controls' products and the mitigation measures taken.
🚨 CVE-2026-34490
Cleartext storage of sensitive information vulnerability in Johnson Controls XAAP Application on Android allows an attacker on a jailbroken or otherwise compromised device to Retrieve Sensitive Data.
This issue affects XAAP Application: before 1.53.
🎖@cveNotify
Cleartext storage of sensitive information vulnerability in Johnson Controls XAAP Application on Android allows an attacker on a jailbroken or otherwise compromised device to Retrieve Sensitive Data.
This issue affects XAAP Application: before 1.53.
🎖@cveNotify
Johnsoncontrols
Security Advisories
Check out the listed Security Advisories (SA) about identified security vulnerabilities in Johnson Controls' products and the mitigation measures taken.
🚨 CVE-2026-34497
Improper neutralization of Script-Related HTML tags in a web page (basic XSS) vulnerability in Johnson Controls FM Systems Employee allows Cross-Site Scripting (XSS).
This issue affects FM Systems Employee: before 2025.3.1.
🎖@cveNotify
Improper neutralization of Script-Related HTML tags in a web page (basic XSS) vulnerability in Johnson Controls FM Systems Employee allows Cross-Site Scripting (XSS).
This issue affects FM Systems Employee: before 2025.3.1.
🎖@cveNotify
Johnsoncontrols
Security Advisories
Check out the listed Security Advisories (SA) about identified security vulnerabilities in Johnson Controls' products and the mitigation measures taken.
🚨 CVE-2021-34527
A remote code execution vulnerability exists when the Windows Print Spooler service improperly performs privileged file operations. An attacker who successfully exploited this vulnerability could run arbitrary code with SYSTEM privileges. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights.
UPDATE July 7, 2021: The security update for Windows Server 2012, Windows Server 2016 and Windows 10, Version 1607 have been released. Please see the Security Updates table for the applicable update for your system. We recommend that you install these updates immediately. If you are unable to install these updates, see the FAQ and Workaround sections in this CVE for information on how to help protect your system from this vulnerability.
In addition to installing the updates, in order to secure your system, you must confirm that the following registry settings are set to 0 (zero) or are not defined (Note: These registry keys do not exist by default, and therefore are already at the secure setting.), also that your Group Policy setting are correct (see FAQ):
HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows NT\Printers\PointAndPrint
NoWarningNoElevationOnInstall = 0 (DWORD) or not defined (default setting)
UpdatePromptSettings = 0 (DWORD) or not defined (default setting)
Having NoWarningNoElevationOnInstall set to 1 makes your system vulnerable by design.
UPDATE July 6, 2021: Microsoft has completed the investigation and has released security updates to address this vulnerability. Please see the Security Updates table for the applicable update for your system. We recommend that you install these updates immediately. If you are unable to install these updates, see the FAQ and Workaround sections in this CVE for information on how to help protect your system from this vulnerability. See also KB5005010: Restricting installation of new printer drivers after applying the July 6, 2021 updates.
Note that the security updates released on and after July 6, 2021 contain protections for CVE-2021-1675 and the additional remote code execution exploit in the Windows Print Spooler service known as “PrintNightmare”, documented in CVE-2021-34527.
🎖@cveNotify
A remote code execution vulnerability exists when the Windows Print Spooler service improperly performs privileged file operations. An attacker who successfully exploited this vulnerability could run arbitrary code with SYSTEM privileges. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights.
UPDATE July 7, 2021: The security update for Windows Server 2012, Windows Server 2016 and Windows 10, Version 1607 have been released. Please see the Security Updates table for the applicable update for your system. We recommend that you install these updates immediately. If you are unable to install these updates, see the FAQ and Workaround sections in this CVE for information on how to help protect your system from this vulnerability.
In addition to installing the updates, in order to secure your system, you must confirm that the following registry settings are set to 0 (zero) or are not defined (Note: These registry keys do not exist by default, and therefore are already at the secure setting.), also that your Group Policy setting are correct (see FAQ):
HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows NT\Printers\PointAndPrint
NoWarningNoElevationOnInstall = 0 (DWORD) or not defined (default setting)
UpdatePromptSettings = 0 (DWORD) or not defined (default setting)
Having NoWarningNoElevationOnInstall set to 1 makes your system vulnerable by design.
UPDATE July 6, 2021: Microsoft has completed the investigation and has released security updates to address this vulnerability. Please see the Security Updates table for the applicable update for your system. We recommend that you install these updates immediately. If you are unable to install these updates, see the FAQ and Workaround sections in this CVE for information on how to help protect your system from this vulnerability. See also KB5005010: Restricting installation of new printer drivers after applying the July 6, 2021 updates.
Note that the security updates released on and after July 6, 2021 contain protections for CVE-2021-1675 and the additional remote code execution exploit in the Windows Print Spooler service known as “PrintNightmare”, documented in CVE-2021-34527.
🎖@cveNotify
🚨 CVE-2021-36934
An elevation of privilege vulnerability exists because of overly permissive Access Control Lists (ACLs) on multiple system files, including the Security Accounts Manager (SAM) database. An attacker who successfully exploited this vulnerability could run arbitrary code with SYSTEM privileges. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights.
An attacker must have the ability to execute code on a victim system to exploit this vulnerability.
After installing this security update, you must manually delete all shadow copies of system files, including the SAM database, to fully mitigate this vulnerabilty. Simply installing this security update will not fully mitigate this vulnerability. See KB5005357- Delete Volume Shadow Copies.
🎖@cveNotify
An elevation of privilege vulnerability exists because of overly permissive Access Control Lists (ACLs) on multiple system files, including the Security Accounts Manager (SAM) database. An attacker who successfully exploited this vulnerability could run arbitrary code with SYSTEM privileges. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights.
An attacker must have the ability to execute code on a victim system to exploit this vulnerability.
After installing this security update, you must manually delete all shadow copies of system files, including the SAM database, to fully mitigate this vulnerabilty. Simply installing this security update will not fully mitigate this vulnerability. See KB5005357- Delete Volume Shadow Copies.
🎖@cveNotify
🚨 CVE-2021-36955
Windows Common Log File System Driver Elevation of Privilege Vulnerability
🎖@cveNotify
Windows Common Log File System Driver Elevation of Privilege Vulnerability
🎖@cveNotify
🚨 CVE-2021-40444
Microsoft is investigating reports of a remote code execution vulnerability in MSHTML that affects Microsoft Windows. Microsoft is aware of targeted attacks that attempt to exploit this vulnerability by using specially-crafted Microsoft Office documents.
An attacker could craft a malicious ActiveX control to be used by a Microsoft Office document that hosts the browser rendering engine. The attacker would then have to convince the user to open the malicious document. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.
Microsoft Defender Antivirus and Microsoft Defender for Endpoint both provide detection and protections for the known vulnerability. Customers should keep antimalware products up to date. Customers who utilize automatic updates do not need to take additional action. Enterprise customers who manage updates should select the detection build 1.349.22.0 or newer and deploy it across their environments. Microsoft Defender for Endpoint alerts will be displayed as: “Suspicious Cpl File Execution”.
Upon completion of this investigation, Microsoft will take the appropriate action to help protect our customers. This may include providing a security update through our monthly release process or providing an out-of-cycle security update, depending on customer needs.
Please see the Mitigations and Workaround sections for important information about steps you can take to protect your system from this vulnerability.
UPDATE September 14, 2021: Microsoft has released security updates to address this vulnerability. Please see the Security Updates table for the applicable update for your system. We recommend that you install these updates immediately. Please see the FAQ for important information about which updates are applicable to your system.
🎖@cveNotify
Microsoft is investigating reports of a remote code execution vulnerability in MSHTML that affects Microsoft Windows. Microsoft is aware of targeted attacks that attempt to exploit this vulnerability by using specially-crafted Microsoft Office documents.
An attacker could craft a malicious ActiveX control to be used by a Microsoft Office document that hosts the browser rendering engine. The attacker would then have to convince the user to open the malicious document. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.
Microsoft Defender Antivirus and Microsoft Defender for Endpoint both provide detection and protections for the known vulnerability. Customers should keep antimalware products up to date. Customers who utilize automatic updates do not need to take additional action. Enterprise customers who manage updates should select the detection build 1.349.22.0 or newer and deploy it across their environments. Microsoft Defender for Endpoint alerts will be displayed as: “Suspicious Cpl File Execution”.
Upon completion of this investigation, Microsoft will take the appropriate action to help protect our customers. This may include providing a security update through our monthly release process or providing an out-of-cycle security update, depending on customer needs.
Please see the Mitigations and Workaround sections for important information about steps you can take to protect your system from this vulnerability.
UPDATE September 14, 2021: Microsoft has released security updates to address this vulnerability. Please see the Security Updates table for the applicable update for your system. We recommend that you install these updates immediately. Please see the FAQ for important information about which updates are applicable to your system.
🎖@cveNotify
🚨 CVE-2025-14733
An Out-of-bounds Write vulnerability in the WatchGuard Fireware OS iked process may allow a remote unauthenticated attacker to execute arbitrary code. This vulnerability affects both the mobile user VPN with IKEv2 and the branch office VPN using IKEv2 when configured with a dynamic gateway peer.
If the Firebox was previously configured with the mobile user VPN with IKEv2 or a branch office VPN using IKEv2 to a dynamic gateway peer, and both of those configurations have since been deleted, that Firebox may still be vulnerable if a branch office VPN to a static gateway peer is still configured.
🎖@cveNotify
An Out-of-bounds Write vulnerability in the WatchGuard Fireware OS iked process may allow a remote unauthenticated attacker to execute arbitrary code. This vulnerability affects both the mobile user VPN with IKEv2 and the branch office VPN using IKEv2 when configured with a dynamic gateway peer.
If the Firebox was previously configured with the mobile user VPN with IKEv2 or a branch office VPN using IKEv2 to a dynamic gateway peer, and both of those configurations have since been deleted, that Firebox may still be vulnerable if a branch office VPN to a static gateway peer is still configured.
🎖@cveNotify
🚨 CVE-2025-13444
OS Command Injection Remote Code Execution Vulnerability in API in Progress LoadMaster allows an authenticated attacker with “User Administration” permissions to execute arbitrary commands on the LoadMaster appliance by exploiting unsanitized input in the API input parameters
🎖@cveNotify
OS Command Injection Remote Code Execution Vulnerability in API in Progress LoadMaster allows an authenticated attacker with “User Administration” permissions to execute arbitrary commands on the LoadMaster appliance by exploiting unsanitized input in the API input parameters
🎖@cveNotify
Progress
Connection Manager for ObjectScale Vulnerabilities: CVE-2025-13444 / CVE-2025-13447 - Progress Community
This article describes two high-severity security vulnerabilities that affect the Connection Manager for ObjectScale versions listed later in this article. We have not received any reports that these vulnerabilities have been exploited, and we are not aware…