🚨 CVE-2026-19429
Jenkins FilePath.untarFrom() (all versions) validates symlink destinations but not targets, bypassing CVE-2026-33001. Any user with Item/Build access triggers tar extraction via POST /job/{name}/build, writing persistent symlinks into the tool cache. Symlinks to secrets/master.key, hudson.util.Secret, credentials.xml, and users/*/config.xml read via GET /job/{name}/lastBuild/consoleText enable offline AES decryption of all credentials and admin API tokens without bcrypt cracking, achieving RCE.
🎖@cveNotify
Jenkins FilePath.untarFrom() (all versions) validates symlink destinations but not targets, bypassing CVE-2026-33001. Any user with Item/Build access triggers tar extraction via POST /job/{name}/build, writing persistent symlinks into the tool cache. Symlinks to secrets/master.key, hudson.util.Secret, credentials.xml, and users/*/config.xml read via GET /job/{name}/lastBuild/consoleText enable offline AES decryption of all credentials and admin API tokens without bcrypt cracking, achieving RCE.
🎖@cveNotify
GitHub
GitHub - jenkinsci/jenkins: Jenkins automation server
Jenkins automation server. Contribute to jenkinsci/jenkins development by creating an account on GitHub.
🚨 CVE-2026-18412
OpenCart extensions are uploaded as zip files with .ocmod.zip extensions. Upon installation, the OpenCart v4.2.0.0 extension installer extracts these zip files, but does not validate that the extracted paths stay inside the intended extraction directory. An attacker can craft a malicious extension containing file path traversal sequences, such as ../. With this vulnerability, an attacker can write files, such as a PHP web shell, into the webroot directory.
🎖@cveNotify
OpenCart extensions are uploaded as zip files with .ocmod.zip extensions. Upon installation, the OpenCart v4.2.0.0 extension installer extracts these zip files, but does not validate that the extracted paths stay inside the intended extraction directory. An attacker can craft a malicious extension containing file path traversal sequences, such as ../. With this vulnerability, an attacker can write files, such as a PHP web shell, into the webroot directory.
🎖@cveNotify
kb.cert.org
CERT/CC Vulnerability Note VU#614868
OpenCart ecommerce platform contains directory traversal vulnerability
🚨 CVE-2026-19433
Authorization Bypass Through User-Controlled Key in the contact management component in Roskus Prospero Flow CRM before 5.4.8 allows authenticated users of any company to blindly overwrite the contact data of another company and to download that contact's personal data as a vCard via the contact's numeric identifier, because the save and export operations retrieve the record without constraining the query to the authenticated user's company.
🎖@cveNotify
Authorization Bypass Through User-Controlled Key in the contact management component in Roskus Prospero Flow CRM before 5.4.8 allows authenticated users of any company to blindly overwrite the contact data of another company and to download that contact's personal data as a vCard via the contact's numeric identifier, because the save and export operations retrieve the record without constraining the query to the authenticated user's company.
🎖@cveNotify
GitHub
fix(contact): prevent cross-tenant blind writes and information discl… · Roskus/prospero-flow-crm@f16b4af
…osure
- ContactRepository::save(): filter by company_id when fetching contacts to update,
preventing blind writes to other companies' contacts
- SupplierContactRepository::save(): filte...
- ContactRepository::save(): filter by company_id when fetching contacts to update,
preventing blind writes to other companies' contacts
- SupplierContactRepository::save(): filte...
🚨 CVE-2026-72759
In affected versions of MISP cti-transmute, the conversion-history details endpoint performs an incomplete authorization check. When a history record references a deleted conversion, the associated conversion lookup returns None. The previous logic only denied access when the conversion object existed and the visibility check failed. As a result, deleted conversions bypassed the authorization check and their retained history input/output could be disclosed to a user able to request the corresponding history entry. The July 22, 2026 commit changes the logic to deny access whenever the conversion is missing or the requester lacks permission
🎖@cveNotify
In affected versions of MISP cti-transmute, the conversion-history details endpoint performs an incomplete authorization check. When a history record references a deleted conversion, the associated conversion lookup returns None. The previous logic only denied access when the conversion object existed and the visibility check failed. As a result, deleted conversions bypassed the authorization check and their retained history input/output could be disclosed to a user able to request the corresponding history entry. The July 22, 2026 commit changes the logic to deny access whenever the conversion is missing or the requester lacks permission
🎖@cveNotify
GitHub
fix: [website] Deny history details when the conversion is deleted · MISP/cti-transmute@88dc65f
An online service for converting cyber threat intelligence format, built to promote interoperability and seamless data exchange - fix: [website] Deny history details when the conversion is deleted · MISP/cti-transmute@88dc65f
🚨 CVE-2026-72760
Affected versions of MISP cti-transmute disclose users' email addresses through the account following-list endpoint. When an authenticated user follows another account, get_following() includes the followed user's email field in the API response alongside their name, user ID, and follow date. Because the email address is not required for the functionality and other related user lists omit it, an authenticated attacker could systematically follow users and collect their email addresses. The fix removes user.email from the returned object.
🎖@cveNotify
Affected versions of MISP cti-transmute disclose users' email addresses through the account following-list endpoint. When an authenticated user follows another account, get_following() includes the followed user's email field in the API response alongside their name, user ID, and follow date. Because the email address is not required for the functionality and other related user lists omit it, an authenticated attacker could systematically follow users and collect their email addresses. The fix removes user.email from the returned object.
🎖@cveNotify
GitHub
fix: [website] Drop the email field from the following list · MISP/cti-transmute@4bad9f1
Each entry included the followed user's email, so any account could
harvest addresses just by following people. The UI only needs name,
since date, and user_id; the sibling followers/...
harvest addresses just by following people. The UI only needs name,
since date, and user_id; the sibling followers/...
🚨 CVE-2026-72761
The webhook URL validator in `website/notifications/webhooks.py` uses
`ip.is_global` to reject non-public addresses after DNS resolution. IPv6
transition addresses (NAT64 `64:ff9b::/96`, 6to4 `2002::/16`, Teredo
`2001:0000::/32`) are classified as globally routable by IANA, so `is_global`
returns `True` even when the embedded IPv4 targets a private, loopback, or
cloud metadata destination. An attacker can register a webhook pointing at a
hostname that resolves to a transition address to bypass the SSRF guard and
exfiltrate vulnerability data to an internal endpoint.
The vulnerability was introduced on a non-release version. The fix was already done on HEAD. It only affects
organisation running the HEAD.
🎖@cveNotify
The webhook URL validator in `website/notifications/webhooks.py` uses
`ip.is_global` to reject non-public addresses after DNS resolution. IPv6
transition addresses (NAT64 `64:ff9b::/96`, 6to4 `2002::/16`, Teredo
`2001:0000::/32`) are classified as globally routable by IANA, so `is_global`
returns `True` even when the embedded IPv4 targets a private, loopback, or
cloud metadata destination. An attacker can register a webhook pointing at a
hostname that resolves to a transition address to bypass the SSRF guard and
exfiltrate vulnerability data to an internal endpoint.
The vulnerability was introduced on a non-release version. The fix was already done on HEAD. It only affects
organisation running the HEAD.
🎖@cveNotify
GitHub
fix: [webhooks] block IPv6 transition addresses in SSRF guard (GHSA-m… · vulnerability-lookup/vulnerability-lookup@f3e0c68
…vm9-4fhw-xqf3)
The webhook URL validator gated resolved IPs solely on ip.is_global. IPv6
transition addresses (NAT64 64:ff9b::/96, 6to4 2002::/16, Teredo, and
IPv4-mapped) are classified as globa...
The webhook URL validator gated resolved IPs solely on ip.is_global. IPv6
transition addresses (NAT64 64:ff9b::/96, 6to4 2002::/16, Teredo, and
IPv4-mapped) are classified as globa...
🚨 CVE-2026-58227
The Erlang/OTP ssl application does not detect cycles when reconstructing an incomplete peer certificate chain during a TLS or DTLS handshake. In ssl_certificate:handle_incomplete_chain/5, the received chain is passed to ssl_certificate:build_certificate_chain/5, which walks issuer relationships via ssl_certificate:do_certificate_chain/7 with no cycle detection and no depth limit. When the peer supplies two mutually cross-signed certificates in unordered form (A issues B, B issues A), the issuer lookup alternates between the two certificates and the pair of functions recurses indefinitely, growing the call stack and chain accumulator without bound.
An unauthenticated remote attacker can send a crafted certificate chain in a TLS or DTLS Certificate handshake message to exhaust available memory and crash the BEAM node. Only a TCP connection and a partial handshake are required; no authentication or completed handshake is needed, and both TLS/DTLS servers and clients are affected when processing peer certificate messages.
This issue affects OTP from OTP 23.2 before OTP 29.0.4, OTP 28.5.0.4 and OTP 27.3.4.15, corresponding to ssl from 10.2 before 11.7.4, 11.6.0.4 and 11.2.12.11.
🎖@cveNotify
The Erlang/OTP ssl application does not detect cycles when reconstructing an incomplete peer certificate chain during a TLS or DTLS handshake. In ssl_certificate:handle_incomplete_chain/5, the received chain is passed to ssl_certificate:build_certificate_chain/5, which walks issuer relationships via ssl_certificate:do_certificate_chain/7 with no cycle detection and no depth limit. When the peer supplies two mutually cross-signed certificates in unordered form (A issues B, B issues A), the issuer lookup alternates between the two certificates and the pair of functions recurses indefinitely, growing the call stack and chain accumulator without bound.
An unauthenticated remote attacker can send a crafted certificate chain in a TLS or DTLS Certificate handshake message to exhaust available memory and crash the BEAM node. Only a TCP connection and a partial handshake are required; no authentication or completed handshake is needed, and both TLS/DTLS servers and clients are affected when processing peer certificate messages.
This issue affects OTP from OTP 23.2 before OTP 29.0.4, OTP 28.5.0.4 and OTP 27.3.4.15, corresponding to ssl from 10.2 before 11.7.4, 11.6.0.4 and 11.2.12.11.
🎖@cveNotify
🚨 CVE-2026-18531
IBM Maximo Application Suite 9.2, 9.1, and 9.0 could allow a remote attacker to tamper with session data due to the use of a weak HMAC session signing secret.
🎖@cveNotify
IBM Maximo Application Suite 9.2, 9.1, and 9.0 could allow a remote attacker to tamper with session data due to the use of a weak HMAC session signing secret.
🎖@cveNotify
Ibm
Security Bulletin: IBM MAS uses axios-1.15.2, protobufjs-8.0.1 and undici-7.26 which is vulnerable to multiple CVEs, and contains…
IBM Maximo Application Suite uses axios-1.15.2.tgz, protobufjs-8.0.1.tgz, protobufjs-8.2.0.tgz and undici-7.26.0.tgz which is vulnerable to CVE-2026-11525, CVE-2026-12151, CVE-2026-6733, CVE-2026-6734, CVE-2026-9678, CVE-2026-9679, CVE-2026-9697, CVE-2026…
🚨 CVE-2026-8400
IBM WebSphere Application Server 8.5, and 9.0 and IBM WebSphere Application Server - Liberty Continuous delivery has a flaw in the ORB component in IBM SDK, Java Technology Edition, may allow a malicious IIOP server to induce loading and instantation of arbitrary classes.
🎖@cveNotify
IBM WebSphere Application Server 8.5, and 9.0 and IBM WebSphere Application Server - Liberty Continuous delivery has a flaw in the ORB component in IBM SDK, Java Technology Edition, may allow a malicious IIOP server to induce loading and instantation of arbitrary classes.
🎖@cveNotify
Ibm
Security Bulletin: Multiple Vulnerabilities in IBM® Java SDK affect IBM WebSphere Application Server and WebSphere Application…
There are multiple vulnerabilities in the IBM® SDK, Java™ Technology Edition that is shipped with IBM WebSphere Application Server and IBM WebSphere Application Server Liberty. The CVE(s) listed in this document might affect some configurations of IBM WebSphere…
🚨 CVE-2021-34527
A remote code execution vulnerability exists when the Windows Print Spooler service improperly performs privileged file operations. An attacker who successfully exploited this vulnerability could run arbitrary code with SYSTEM privileges. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights.
UPDATE July 7, 2021: The security update for Windows Server 2012, Windows Server 2016 and Windows 10, Version 1607 have been released. Please see the Security Updates table for the applicable update for your system. We recommend that you install these updates immediately. If you are unable to install these updates, see the FAQ and Workaround sections in this CVE for information on how to help protect your system from this vulnerability.
In addition to installing the updates, in order to secure your system, you must confirm that the following registry settings are set to 0 (zero) or are not defined (Note: These registry keys do not exist by default, and therefore are already at the secure setting.), also that your Group Policy setting are correct (see FAQ):
HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows NT\Printers\PointAndPrint
NoWarningNoElevationOnInstall = 0 (DWORD) or not defined (default setting)
UpdatePromptSettings = 0 (DWORD) or not defined (default setting)
Having NoWarningNoElevationOnInstall set to 1 makes your system vulnerable by design.
UPDATE July 6, 2021: Microsoft has completed the investigation and has released security updates to address this vulnerability. Please see the Security Updates table for the applicable update for your system. We recommend that you install these updates immediately. If you are unable to install these updates, see the FAQ and Workaround sections in this CVE for information on how to help protect your system from this vulnerability. See also KB5005010: Restricting installation of new printer drivers after applying the July 6, 2021 updates.
Note that the security updates released on and after July 6, 2021 contain protections for CVE-2021-1675 and the additional remote code execution exploit in the Windows Print Spooler service known as “PrintNightmare”, documented in CVE-2021-34527.
🎖@cveNotify
A remote code execution vulnerability exists when the Windows Print Spooler service improperly performs privileged file operations. An attacker who successfully exploited this vulnerability could run arbitrary code with SYSTEM privileges. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights.
UPDATE July 7, 2021: The security update for Windows Server 2012, Windows Server 2016 and Windows 10, Version 1607 have been released. Please see the Security Updates table for the applicable update for your system. We recommend that you install these updates immediately. If you are unable to install these updates, see the FAQ and Workaround sections in this CVE for information on how to help protect your system from this vulnerability.
In addition to installing the updates, in order to secure your system, you must confirm that the following registry settings are set to 0 (zero) or are not defined (Note: These registry keys do not exist by default, and therefore are already at the secure setting.), also that your Group Policy setting are correct (see FAQ):
HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows NT\Printers\PointAndPrint
NoWarningNoElevationOnInstall = 0 (DWORD) or not defined (default setting)
UpdatePromptSettings = 0 (DWORD) or not defined (default setting)
Having NoWarningNoElevationOnInstall set to 1 makes your system vulnerable by design.
UPDATE July 6, 2021: Microsoft has completed the investigation and has released security updates to address this vulnerability. Please see the Security Updates table for the applicable update for your system. We recommend that you install these updates immediately. If you are unable to install these updates, see the FAQ and Workaround sections in this CVE for information on how to help protect your system from this vulnerability. See also KB5005010: Restricting installation of new printer drivers after applying the July 6, 2021 updates.
Note that the security updates released on and after July 6, 2021 contain protections for CVE-2021-1675 and the additional remote code execution exploit in the Windows Print Spooler service known as “PrintNightmare”, documented in CVE-2021-34527.
🎖@cveNotify