🚨 CVE-2026-16242
A flaw was found in the Konnectivity proxy-server configuration for hosted control planes. The agent-facing listener was started without --cluster-ca-cert (and without token-based agent authentication), so client certificates were not validated. A remote attacker who can reach the Konnectivity cluster endpoint could connect as an unauthenticated agent, join the routing pool, and potentially proxy, inspect, modify, or drop control-plane-to-node traffic.
🎖@cveNotify
A flaw was found in the Konnectivity proxy-server configuration for hosted control planes. The agent-facing listener was started without --cluster-ca-cert (and without token-based agent authentication), so client certificates were not validated. A remote attacker who can reach the Konnectivity cluster endpoint could connect as an unauthenticated agent, join the routing pool, and potentially proxy, inspect, modify, or drop control-plane-to-node traffic.
🎖@cveNotify
🚨 CVE-2026-17107
A flaw was found in the cluster-proxy service-proxy component used in Red Hat Advanced Cluster Management for Kubernetes (RHACM) and multicluster-engine (MCE). The service-proxy appends impersonation group headers to proxied requests without first removing caller-supplied values, and the spoke ServiceAccount holds unrestricted impersonation permissions. An authenticated hub principal can inject an Impersonate-Group header to escalate to cluster-admin on every managed cluster.
🎖@cveNotify
A flaw was found in the cluster-proxy service-proxy component used in Red Hat Advanced Cluster Management for Kubernetes (RHACM) and multicluster-engine (MCE). The service-proxy appends impersonation group headers to proxied requests without first removing caller-supplied values, and the spoke ServiceAccount holds unrestricted impersonation permissions. An authenticated hub principal can inject an Impersonate-Group header to escalate to cluster-admin on every managed cluster.
🎖@cveNotify
🚨 CVE-2026-19358
A weakness has been identified in 3CORESec Trapdoor up to 1.2.2. Affected by this vulnerability is the function DefaultFunction. This manipulation causes improper access controls. The attack can be initiated remotely. The vendor was contacted early about this disclosure.
🎖@cveNotify
A weakness has been identified in 3CORESec Trapdoor up to 1.2.2. Affected by this vulnerability is the function DefaultFunction. This manipulation causes improper access controls. The attack can be initiated remotely. The vendor was contacted early about this disclosure.
🎖@cveNotify
Vulnerability Database
CVE-2026-19358 in Trapdoor
A weakness has been identified in 3CORESec Trapdoor up to 1.2.2. This vulnerability is handled as CVE-2026-19358.
🚨 CVE-2025-2786
A flaw was found in Tempo Operator, where it creates a ServiceAccount, ClusterRole, and ClusterRoleBinding when a user deploys a TempoStack or TempoMonolithic instance. This flaw allows a user with full access to their namespace to extract the ServiceAccount token and use it to submit TokenReview and SubjectAccessReview requests, potentially revealing information about other users' permissions. While this does not allow privilege escalation or impersonation, it exposes information that could aid in gathering information for further attacks.
🎖@cveNotify
A flaw was found in Tempo Operator, where it creates a ServiceAccount, ClusterRole, and ClusterRoleBinding when a user deploys a TempoStack or TempoMonolithic instance. This flaw allows a user with full access to their namespace to extract the ServiceAccount token and use it to submit TokenReview and SubjectAccessReview requests, potentially revealing information about other users' permissions. While this does not allow privilege escalation or impersonation, it exposes information that could aid in gathering information for further attacks.
🎖@cveNotify
🚨 CVE-2025-2842
A flaw was found in the Tempo Operator. When the Jaeger UI Monitor Tab functionality is enabled in a Tempo instance managed by the Tempo Operator, the Operator creates a ClusterRoleBinding for the Service Account of the Tempo instance to grant the cluster-monitoring-view ClusterRole.
This can be exploited if a user has 'create' permissions on TempoStack and 'get' permissions on Secret in a namespace (for example, a user has ClusterAdmin permissions for a specific namespace), as the user can read the token of the Tempo service account and therefore has access to see all cluster metrics.
🎖@cveNotify
A flaw was found in the Tempo Operator. When the Jaeger UI Monitor Tab functionality is enabled in a Tempo instance managed by the Tempo Operator, the Operator creates a ClusterRoleBinding for the Service Account of the Tempo instance to grant the cluster-monitoring-view ClusterRole.
This can be exploited if a user has 'create' permissions on TempoStack and 'get' permissions on Secret in a namespace (for example, a user has ClusterAdmin permissions for a specific namespace), as the user can read the token of the Tempo service account and therefore has access to see all cluster metrics.
🎖@cveNotify
🚨 CVE-2025-5278
A flaw was found in GNU Coreutils. The sort utility's begfield() function is vulnerable to a heap buffer under-read. The program may access memory outside the allocated buffer if a user runs a crafted command using the traditional key format. A malicious input could lead to a crash or leak sensitive data.
🎖@cveNotify
A flaw was found in GNU Coreutils. The sort utility's begfield() function is vulnerable to a heap buffer under-read. The program may access memory outside the allocated buffer if a user runs a crafted command using the traditional key format. A malicious input could lead to a crash or leak sensitive data.
🎖@cveNotify
🚨 CVE-2025-7195
Early versions of Operator-SDK provided an insecure method to allow operator containers to run in environments that used a random UID. Operator-SDK before 0.15.2 provided a script, user_setup, which modifies the permissions of the /etc/passwd file to 664 during build time. Developers who used Operator-SDK before 0.15.2 to scaffold their operator may still be impacted by this if the insecure user_setup script is still being used to build new container images.
In affected images, the /etc/passwd file is created during build time with group-writable permissions and a group ownership of root (gid=0). An attacker who can execute commands within an affected container, even as a non-root user, may be able to leverage their membership in the root group to modify the /etc/passwd file. This could allow the attacker to add a new user with any arbitrary UID, including UID 0, leading to full root privileges within the container.
🎖@cveNotify
Early versions of Operator-SDK provided an insecure method to allow operator containers to run in environments that used a random UID. Operator-SDK before 0.15.2 provided a script, user_setup, which modifies the permissions of the /etc/passwd file to 664 during build time. Developers who used Operator-SDK before 0.15.2 to scaffold their operator may still be impacted by this if the insecure user_setup script is still being used to build new container images.
In affected images, the /etc/passwd file is created during build time with group-writable permissions and a group ownership of root (gid=0). An attacker who can execute commands within an affected container, even as a non-root user, may be able to leverage their membership in the root group to modify the /etc/passwd file. This could allow the attacker to add a new user with any arbitrary UID, including UID 0, leading to full root privileges within the container.
🎖@cveNotify
🚨 CVE-2026-4878
A flaw was found in libcap. A local unprivileged user can exploit a Time-of-check-to-time-of-use (TOCTOU) race condition in the `cap_set_file()` function. This allows an attacker with write access to a parent directory to redirect file capability updates to an attacker-controlled file. By doing so, capabilities can be injected into or stripped from unintended executables, leading to privilege escalation.
🎖@cveNotify
A flaw was found in libcap. A local unprivileged user can exploit a Time-of-check-to-time-of-use (TOCTOU) race condition in the `cap_set_file()` function. This allows an attacker with write access to a parent directory to redirect file capability updates to an attacker-controlled file. By doing so, capabilities can be injected into or stripped from unintended executables, leading to privilege escalation.
🎖@cveNotify
🚨 CVE-2026-9804
A flaw was found in KubeVirt's virt-exportserver component. An attacker with specific namespace-level access can exploit a path traversal vulnerability in the VMExport directory endpoint. By placing a symbolic link (symlink) within an exported filesystem Persistent Volume Claim (PVC) that points outside its designated mount root, the attacker can read arbitrary files from the exporter pod's filesystem. This leads to information disclosure, potentially exposing sensitive data.
🎖@cveNotify
A flaw was found in KubeVirt's virt-exportserver component. An attacker with specific namespace-level access can exploit a path traversal vulnerability in the VMExport directory endpoint. By placing a symbolic link (symlink) within an exported filesystem Persistent Volume Claim (PVC) that points outside its designated mount root, the attacker can read arbitrary files from the exporter pod's filesystem. This leads to information disclosure, potentially exposing sensitive data.
🎖@cveNotify
🚨 CVE-2026-19359
A security vulnerability has been detected in nxp-auto-goldvip gvip up to 1.4.0. Affected by this issue is the function SitewiseCustomFunction of the component Lambda Function Handler. Such manipulation leads to improper access controls. The attack can be launched remotely. Upgrading to version 1.15.0 can resolve this issue. Upgrading the affected component is advised. The project explains: "The reported IAM permission configuration is a known historical issue that was already addressed in 2024, beginning with GoldVIP version 1.13.0. The permissions were updated in subsequent releases, including version 1.15.0. In addition, we also sent a request to either update or deprecate the older release in the AWS SAR application repository."
🎖@cveNotify
A security vulnerability has been detected in nxp-auto-goldvip gvip up to 1.4.0. Affected by this issue is the function SitewiseCustomFunction of the component Lambda Function Handler. Such manipulation leads to improper access controls. The attack can be launched remotely. Upgrading to version 1.15.0 can resolve this issue. Upgrading the affected component is advised. The project explains: "The reported IAM permission configuration is a known historical issue that was already addressed in 2024, beginning with GoldVIP version 1.13.0. The permissions were updated in subsequent releases, including version 1.15.0. In addition, we also sent a request to either update or deprecate the older release in the AWS SAR application repository."
🎖@cveNotify
GitHub
Release goldvip-1.15.0: cloud-gw: Update semantic version for GoldVIP 1.15.0 · nxp-auto-goldvip/gvip
Issue: GVIP-1884
Signed-off-by: Victor Gheorghe victor.gheorghe@nxp.com
Signed-off-by: Victor Gheorghe victor.gheorghe@nxp.com
🚨 CVE-2026-19360
A vulnerability was detected in wongcyrus ExcelLexBot up to 0.0.3. This affects the function ExcelLexBotS3TriggerFunction of the component Lambda Function Handler. Performing a manipulation results in improper privilege management. The attack may be initiated remotely. The vendor was contacted early about this disclosure but did not respond in any way. This vulnerability only affects products that are no longer supported by the maintainer.
🎖@cveNotify
A vulnerability was detected in wongcyrus ExcelLexBot up to 0.0.3. This affects the function ExcelLexBotS3TriggerFunction of the component Lambda Function Handler. Performing a manipulation results in improper privilege management. The attack may be initiated remotely. The vendor was contacted early about this disclosure but did not respond in any way. This vulnerability only affects products that are no longer supported by the maintainer.
🎖@cveNotify
Vulnerability Database
CVE-2026-19360 in ExcelLexBot
A vulnerability was detected in wongcyrus ExcelLexBot up to 0.0.3. This vulnerability was named CVE-2026-19360.
🚨 CVE-2024-11831
A flaw was found in npm-serialize-javascript. The vulnerability occurs because the serialize-javascript module does not properly sanitize certain inputs, such as regex or other JavaScript object types, allowing an attacker to inject malicious code. This code could be executed when deserialized by a web browser, causing Cross-site scripting (XSS) attacks. This issue is critical in environments where serialized data is sent to web clients, potentially compromising the security of the website or web application using this package.
🎖@cveNotify
A flaw was found in npm-serialize-javascript. The vulnerability occurs because the serialize-javascript module does not properly sanitize certain inputs, such as regex or other JavaScript object types, allowing an attacker to inject malicious code. This code could be executed when deserialized by a web browser, causing Cross-site scripting (XSS) attacks. This issue is critical in environments where serialized data is sent to web clients, potentially compromising the security of the website or web application using this package.
🎖@cveNotify
🚨 CVE-2025-2786
A flaw was found in Tempo Operator, where it creates a ServiceAccount, ClusterRole, and ClusterRoleBinding when a user deploys a TempoStack or TempoMonolithic instance. This flaw allows a user with full access to their namespace to extract the ServiceAccount token and use it to submit TokenReview and SubjectAccessReview requests, potentially revealing information about other users' permissions. While this does not allow privilege escalation or impersonation, it exposes information that could aid in gathering information for further attacks.
🎖@cveNotify
A flaw was found in Tempo Operator, where it creates a ServiceAccount, ClusterRole, and ClusterRoleBinding when a user deploys a TempoStack or TempoMonolithic instance. This flaw allows a user with full access to their namespace to extract the ServiceAccount token and use it to submit TokenReview and SubjectAccessReview requests, potentially revealing information about other users' permissions. While this does not allow privilege escalation or impersonation, it exposes information that could aid in gathering information for further attacks.
🎖@cveNotify
🚨 CVE-2025-2842
A flaw was found in the Tempo Operator. When the Jaeger UI Monitor Tab functionality is enabled in a Tempo instance managed by the Tempo Operator, the Operator creates a ClusterRoleBinding for the Service Account of the Tempo instance to grant the cluster-monitoring-view ClusterRole.
This can be exploited if a user has 'create' permissions on TempoStack and 'get' permissions on Secret in a namespace (for example, a user has ClusterAdmin permissions for a specific namespace), as the user can read the token of the Tempo service account and therefore has access to see all cluster metrics.
🎖@cveNotify
A flaw was found in the Tempo Operator. When the Jaeger UI Monitor Tab functionality is enabled in a Tempo instance managed by the Tempo Operator, the Operator creates a ClusterRoleBinding for the Service Account of the Tempo instance to grant the cluster-monitoring-view ClusterRole.
This can be exploited if a user has 'create' permissions on TempoStack and 'get' permissions on Secret in a namespace (for example, a user has ClusterAdmin permissions for a specific namespace), as the user can read the token of the Tempo service account and therefore has access to see all cluster metrics.
🎖@cveNotify
🚨 CVE-2025-5278
A flaw was found in GNU Coreutils. The sort utility's begfield() function is vulnerable to a heap buffer under-read. The program may access memory outside the allocated buffer if a user runs a crafted command using the traditional key format. A malicious input could lead to a crash or leak sensitive data.
🎖@cveNotify
A flaw was found in GNU Coreutils. The sort utility's begfield() function is vulnerable to a heap buffer under-read. The program may access memory outside the allocated buffer if a user runs a crafted command using the traditional key format. A malicious input could lead to a crash or leak sensitive data.
🎖@cveNotify
🚨 CVE-2025-6020
A flaw was found in linux-pam. The module pam_namespace may use access user-controlled paths without proper protection, allowing local users to elevate their privileges to root via multiple symlink attacks and race conditions.
🎖@cveNotify
A flaw was found in linux-pam. The module pam_namespace may use access user-controlled paths without proper protection, allowing local users to elevate their privileges to root via multiple symlink attacks and race conditions.
🎖@cveNotify
🚨 CVE-2026-7374
A flaw was found in KubeVirt's virt-handler component. This vulnerability allows an authenticated OpenShift user with edit permissions in a single namespace to exploit improper symlink validation when connecting to virtual machine console sockets. By replacing the console socket with a symlink to the host's container runtime (CRI-O) socket, an attacker can hijack virt-handler's privileged connection. This enables the attacker to access any Unix socket on the host, potentially leading to full control of the node and the entire cluster.
🎖@cveNotify
A flaw was found in KubeVirt's virt-handler component. This vulnerability allows an authenticated OpenShift user with edit permissions in a single namespace to exploit improper symlink validation when connecting to virtual machine console sockets. By replacing the console socket with a symlink to the host's container runtime (CRI-O) socket, an attacker can hijack virt-handler's privileged connection. This enables the attacker to access any Unix socket on the host, potentially leading to full control of the node and the entire cluster.
🎖@cveNotify
🚨 CVE-2026-9804
A flaw was found in KubeVirt's virt-exportserver component. An attacker with specific namespace-level access can exploit a path traversal vulnerability in the VMExport directory endpoint. By placing a symbolic link (symlink) within an exported filesystem Persistent Volume Claim (PVC) that points outside its designated mount root, the attacker can read arbitrary files from the exporter pod's filesystem. This leads to information disclosure, potentially exposing sensitive data.
🎖@cveNotify
A flaw was found in KubeVirt's virt-exportserver component. An attacker with specific namespace-level access can exploit a path traversal vulnerability in the VMExport directory endpoint. By placing a symbolic link (symlink) within an exported filesystem Persistent Volume Claim (PVC) that points outside its designated mount root, the attacker can read arbitrary files from the exporter pod's filesystem. This leads to information disclosure, potentially exposing sensitive data.
🎖@cveNotify
🚨 CVE-2026-15534
Perl versions through 5.45.1 have out-of-bounds heap reads and writes during regular expression matching via an undersized superlinear cache in S_regmatch.
The regex engine's superlinear cache holds one bit per subject position for each participating WHILEM node, so the bit count is the subject length plus one times the number of nodes. Nothing checks that product for positive overflow of the signed 32-bit count: a 286331153 byte subject matched against a pattern with 15 participating nodes stores the count as 14, leaving a two byte cache. The cache is then indexed from the real match position and node number, so reads go past the end of the allocation, and on failure CACHEsayNO sets a bit past it.
A caller that matches an attacker controlled subject of this size against a pattern of this shape can crash the process or corrupt heap memory.
🎖@cveNotify
Perl versions through 5.45.1 have out-of-bounds heap reads and writes during regular expression matching via an undersized superlinear cache in S_regmatch.
The regex engine's superlinear cache holds one bit per subject position for each participating WHILEM node, so the bit count is the subject length plus one times the number of nodes. Nothing checks that product for positive overflow of the signed 32-bit count: a 286331153 byte subject matched against a pattern with 15 participating nodes stores the count as 14, leaving a two byte cache. The cache is then indexed from the real match position and node number, so reads go past the end of the allocation, and on failure CACHEsayNO sets a bit past it.
A caller that matches an attacker controlled subject of this size against a pattern of this shape can crash the process or corrupt heap memory.
🎖@cveNotify
🚨 CVE-2026-19361
A flaw has been found in macrozheng mall 0504e86. This vulnerability affects unknown code of the file /sso/getAuthCode of the component mall-portal Module. Executing a manipulation can lead to weak password recovery. The attack may be launched remotely. This attack is characterized by high complexity. It is stated that the exploitability is difficult. The exploit has been published and may be used. The vendor deleted the GitHub issue for this vulnerability without any explanation. Afterwards the vendor was contacted early about this disclosure via email but did not respond in any way.
🎖@cveNotify
A flaw has been found in macrozheng mall 0504e86. This vulnerability affects unknown code of the file /sso/getAuthCode of the component mall-portal Module. Executing a manipulation can lead to weak password recovery. The attack may be launched remotely. This attack is characterized by high complexity. It is stated that the exploitability is difficult. The exploit has been published and may be used. The vendor deleted the GitHub issue for this vulnerability without any explanation. Afterwards the vendor was contacted early about this disclosure via email but did not respond in any way.
🎖@cveNotify
GitHub
GitHub - macrozheng/mall: mall项目是一套电商系统，包括前台商城系统及后台管理系统，基于Spring Boot+MyBatis实现，采用Docker容器化部署。 前台商城系统包含首页门户、商品推荐、商品搜索、商品展示、购物车…
mall项目是一套电商系统，包括前台商城系统及后台管理系统，基于Spring Boot+MyBatis实现，采用Docker容器化部署。 前台商城系统包含首页门户、商品推荐、商品搜索、商品展示、购物车、订单流程、会员中心、客户服务、帮助中心等模块。 后台管理系统包含商品管理、订单管理、会员管理、促销管理、运营管理、内容管理、统计报表、财务管理、权限管理、设置等模块。 - macrozheng...
🚨 CVE-2026-19362
A vulnerability has been found in lmammino oidc-authorizer 0.4.0. This issue affects the function parse_token_from_header of the file src/parse_token_from_header.rs of the component Authorization Header Parsing. The manipulation of the argument authorization_token leads to denial of service. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
🎖@cveNotify
A vulnerability has been found in lmammino oidc-authorizer 0.4.0. This issue affects the function parse_token_from_header of the file src/parse_token_from_header.rs of the component Authorization Header Parsing. The manipulation of the argument authorization_token leads to denial of service. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
🎖@cveNotify
Vulnerability Database
CVE-2026-19362 in oidc-authorizer
A vulnerability has been found in lmammino oidc-authorizer 0.4.0. This vulnerability is referenced as CVE-2026-19362.