🚨 CVE-2026-19213
A vulnerability was identified in WonderTrader up to 0.9.9. Affected is the function _undone_qty in the library src/WtCore/TraderAdapter.h of the component Pending Order Handler. The manipulation of the argument getUndoneQty leads to enforcement of behavioral workflow. The attack is possible to be carried out remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

🎖@cveNotify

🚨 CVE-2026-11430
Grav CMS's scheduler-webhook plugin contains an authentication bypass in the webhook token check. When the webhook feature is enabled but no webhookToken is configured, a compound conditional short-circuits and skips token validation, so an unauthenticated remote attacker who can reach POST /scheduler/webhook can trigger the operator's already-configured scheduled jobs by sending a single request. The primitive is triggering-existing-jobs, not attacker-chosen command execution: the attacker controls when the jobs run and which one runs (via ?job=), but does not control what the jobs do. Code execution follows only when the operator has configured a job that shells out, and even then the attacker controls timing rather than payload. Not a default-install issue: reaching the endpoint requires the separate scheduler-webhook GPM plugin to be installed, scheduler.modern.webhook.enabled to be true (default false), and no webhookToken to be configured; a stock Grav or Grav-Admin install exposes nothing here.

🎖@cveNotify

🚨 CVE-2026-17435
File::Rotate::Simple versions before 0.4.0 for Perl create the target of dangling symlinks when rotating files.

When the file to be rotated is a symbolic link to a missing file, and the touch option is enabled, then the rotate method assumes that the file is absent (since the existence check is against the target), and does not rotate it. But it touches the file, which creates the target.

An attacker that has the ability to create the symlink can use this to create an arbitrary file with permissions of the process rotating the files (which may be different from the process that normally writes to the log file that is being rotated).

Note that the touch option is disabled by default.

🎖@cveNotify

🚨 CVE-2026-48098
NexTor IP Changer is a command-line tool that leverages the Tor network to periodically rotate a user's IP address. Versions prior to 2.0.0 execute privileged system commands using `sudo` and `shell=True` directly inside application logic. In environments where passwordless sudo (`NOPASSWD`) is enabled, privileged commands may execute silently without explicit user confirmation. Version 2.0.0 fixes the issue.

🎖@cveNotify

🚨 CVE-2026-71847
Ruby JSON is a JSON implementation for Ruby. From 2.20.0 until 2.21.2, Ruby's JSON native C extension clears the consumed JSON::ResumableParser input buffer but leaves state.start, state.cursor, and state.end pointing into released storage. When partial_value reconstructs an incomplete object containing duplicate keys, the duplicate-key warning path calls cursor_position, which dereferences those stale pointers. This results in a heap-use-after-free and can terminate the Ruby process. An attacker who can supply JSON stream data to an application using JSON::ResumableParser may cause process termination when the application calls partial_value on incomplete attacker-controlled input containing duplicate object keys. This issue has been fixed in version 2.21.2.

🎖@cveNotify

🚨 CVE-2026-11742
The kernel queue helper z_queue_node_peek() in kernel/queue.c dereferences a node taken from a queue's data_q list, reading the node's flag byte and, for items enqueued via k_queue_alloc_append/alloc_prepend, the data pointer of an internally allocated alloc_node struct. The implementations of z_impl_k_queue_peek_head() and z_impl_k_queue_peek_tail() performed this read-and-dereference without holding the queue's spinlock, while every other accessor of the same list — including k_queue_get(), which unlinks a node and k_free()s its backing alloc_node — operates under that lock.

Because peek was unsynchronized, a concurrent k_queue_get() on the same queue (on an SMP build, or under preemption/ISR concurrency) can free the node between the moment peek obtains the node pointer and the moment it dereferences it. The peek then reads flag bits and a data pointer out of freed, potentially re-allocated heap memory and returns a stale or dangling pointer to its caller. k_fifo and k_lifo are thin wrappers over k_queue, so this affects buffer queues used throughout the net_buf, Bluetooth, USB, and networking subsystems; the peek operations are also system calls reachable from CONFIG_USERSPACE threads.

The consequences are a use-after-free read that can leak stale heap contents (one pointer word) and, when the returned dangling pointer is subsequently consumed as a live buffer, a dereference that can crash the system or corrupt memory. Exploitation requires winning a small race window with local access (e.g. a userspace process racing k_queue_peek_* against k_queue_get on a shared queue, or two CPUs), so practical impact is bounded and of low severity.

The fix wraps both peek implementations with k_spin_lock/k_spin_unlock on the queue lock, making the read-and-dereference atomic with respect to the concurrent unlink-and-free and bringing peek into line with the rest of the queue's locking discipline.

🎖@cveNotify

🚨 CVE-2026-11743
The SF32LB MPI QSPI NOR flash driver (drivers/flash/flash_sf32lb_mpi_qspi_nor.c) validated the flash offset and length on its read and write paths with the test (offset + size) > data->size. Because offset is a signed off_t while size is unsigned, a negative offset is converted to a large unsigned value and the addition can wrap to a small result that passes the check. The read path then performs memcpy(dst, (void *)(data->base + offset), size) and the write path programs flash at offset and cache-invalidates data->base + offset, in both cases accessing memory outside the mapped flash window. The driver's erase path already rejected negative offsets, but read and write did not.

In builds with CONFIG_USERSPACE, flash_read and flash_write are syscalls whose verifiers validate the device object and the caller's buffer but deliberately delegate offset bounds checking to the driver. An unprivileged thread that has been granted access to this flash device can therefore call the syscall with a crafted negative offset and a buffer valid in its own memory domain, and reach the unchecked access.

The most direct impact is on the read path: by choosing a negative offset and matching size, an attacker slides the memcpy source below the flash base and copies arbitrary CPU-addressable memory into its own buffer, disclosing memory it is not authorized to read. The write path additionally allows programming flash at an out-of-range address and invalidating an attacker-chosen cache range, affecting integrity and availability. Reachability requires userspace to be enabled and the raw flash device object to be granted to an untrusted thread.

The fix replaces the check with qspi_nor_range_is_valid(), which rejects negative offsets and performs the bound comparison in overflow-safe 64-bit arithmetic on both paths, and additionally adds an SRAM DMA bounce buffer plus source/destination overlap rejection to prevent a separate DMA bus-hang condition.

🎖@cveNotify

🚨 CVE-2026-45808
OpenBao is an open source identity-based secrets management system. Prior to version 2.5.4, OpenBao's namespaces provide multi-tenant separation. A tenant who intentionally leaks lease identifiers can have their lease and underlying credential revoked or renewed by a user in another tenant via the legacy, undocumented `sys/revoke` and `sys/renew` endpoints. This is fixed in OpenBao v2.5.4.

🎖@cveNotify

🚨 CVE-2026-46405
OpenBao is an open source identity-based secrets management system. Prior to version 2.5.4, in OpenBao's Kerberos auth method on the `GET` handler, or when an `Authorization: Negotiate` header is supplied, the response is includes a `logical.Auth` object in addition to an error message. This results in tokens being created with only the default policy, default TTL, and no entity information, which are hidden by the returned error message. No access to these tokens by the caller occurs and the authentication token is not ever made accessible outside of `sys/raw`. This is fixed in OpenBao v2.5.4. As a workaround, users may set a rate limit quota to limit the creation of these paths. As the path is unauthenticated, it isn't possible to deny access to it.

🎖@cveNotify

🚨 CVE-2026-47243
Kata Containers is an open source project focusing on a standard implementation of lightweight Virtual Machines (VMs) that perform like containers. Prior to 3.31.0, the runtime-rs standalone virtio-fs path is vulnerable to a guest-root to host-root escape. In this configuration, Kata runs the host virtiofsd as root with --sandbox none --seccomp none, so an attacker with root-equivalent access inside the guest can bypass the guest virtio-fs client entirely by taking over the virtio-fs PCI device and building a virtqueue in userspace to submit raw FUSE requests directly to the host virtiofsd. A crafted FUSE_SYMLINK request whose new symlink name is an absolute host path is honored outside the configured shared directory, allowing guest root to create root-owned symlinks in sensitive host locations such as /etc/cron.d. By pointing such a symlink at a guest-controlled crontab payload reachable through a live runtime process's mount namespace, the attacker causes the host cron daemon to execute that payload as host root, crossing the Kata isolation boundary. This issue is fixed in version 3.31.0.

🎖@cveNotify

🚨 CVE-2026-48169
PraisonAI is a multi-agent teams system. Versions prior to 0.1.4 of the PraisonAI Platform API have two authorization failures that together break workspace isolation. The service layer for issues and projects performs global primary-key lookups without checking workspace ownership, so any authenticated user can read, modify, and delete resources in any workspace just by swapping UUIDs in their API requests. On top of that, every member management endpoint (add, update role, remove) only requires `min_role="member"`, which lets any workspace member promote themselves to owner and kick out the original owner. A low-privilege member of one workspace can steal data from every other workspace and take over any workspace they belong to. Both issues come from the same gap: the route layer pulls `workspace_id` from the URL and verifies membership, but the service layer ignores the workspace scope for resource lookups and ignores the caller's role level for member operations. The `require_workspace_member()` dependency does its job correctly. The problem is that the service layer doesn't use the information it provides. Version 0.1.4 of the PraisonAI Platform API patch the issue.

🎖@cveNotify

🚨 CVE-2026-48170
`scim-patch`, a library to perform SCIM patch, prior to version 0.9.1 performs prototype pollution when applying a SCIM PATCH operation whose `value` object contains a key like `"__proto__.someProp"`. After one such patch,
`Object.prototype.someProp` is set process-wide, affecting every plain object in the Node process. Any service that calls `scimPatch()` on attacker-controlled JSON (i.e. any SCIM endpoint accepting `PATCH` from an external IdP) is exploitable on a stock Node runtime. Version 0.9.1 contains a patch. A workaround is available. Calling `Object.freeze(Object.prototype)` (and the same on `Array.prototype`, `Function.prototype`) at process startup neutralizes this class of bug — assignment to a frozen prototype becomes a silent no-op in sloppy mode or a `TypeError` in strict mode. Node's `--frozen-intrinsics` flag does this for built-ins automatically.

🎖@cveNotify

🚨 CVE-2026-58262
Klever-Go is the Go implementation of the Klever blockchain protocol. Prior to 1.7.20, header signature verification counts the unused padding bits of the PubKeysBitmap toward the two-thirds validator quorum. These padding bits do not correspond to any validator and are ignored by the actual BLS aggregate-signature check, so a malicious or compromised block producer can set them to reach the required quorum while gathering fewer genuine validator signatures than the protocol demands. As a result, nodes that import or intercept the header accept it as correctly signed without a real two-thirds quorum, weakening consensus safety and undermining finality. This issue is fixed in version 1.7.20.

🎖@cveNotify

🚨 CVE-2026-64676
Kata Containers is an open source implementation of lightweight Virtual Machines (VMs) that perform like containers. In versions prior to 4.0.0, the kata-agent is vulnerable to an authorization bypass in confidential-guest memory management. In Confidential Containers (CoCo) deployments, the kata-agent enforces an OPA/Rego-based AgentPolicy that must authorize every ttRPC API call, forming the security boundary that prevents an untrusted host from directing the confidential guest. Two ttRPC methods introduced with the mem-agent feature are missing this authorization check, so an untrusted host can invoke them unconditionally regardless of the guest's policy configuration. When mem-agent is enabled (off by default), this lets the host tamper with in-guest memory management by forcing swap, aggressive eviction, or compaction, resulting in attacker-controlled availability and performance degradation of the confidential workload entirely outside the agent-policy boundary. The impact does not include memory disclosure or code execution, and severity is bounded by the precondition that mem-agent must be explicitly enabled. This issue is fixed in version 4.0.0.

🎖@cveNotify

🚨 CVE-2024-4944
A local privilege escalation vlnerability in the WatchGuard Mobile VPN with SSL client on Windows enables a local user to execute arbitrary commands with elevated privileged.

🎖@cveNotify

🚨 CVE-2026-47243
Kata Containers is an open source project focusing on a standard implementation of lightweight Virtual Machines (VMs) that perform like containers. Prior to 3.31.0, the runtime-rs standalone virtio-fs path is vulnerable to a guest-root to host-root escape. In this configuration, Kata runs the host virtiofsd as root with --sandbox none --seccomp none, so an attacker with root-equivalent access inside the guest can bypass the guest virtio-fs client entirely by taking over the virtio-fs PCI device and building a virtqueue in userspace to submit raw FUSE requests directly to the host virtiofsd. A crafted FUSE_SYMLINK request whose new symlink name is an absolute host path is honored outside the configured shared directory, allowing guest root to create root-owned symlinks in sensitive host locations such as /etc/cron.d. By pointing such a symlink at a guest-controlled crontab payload reachable through a live runtime process's mount namespace, the attacker causes the host cron daemon to execute that payload as host root, crossing the Kata isolation boundary. This issue is fixed in version 3.31.0.

🎖@cveNotify

🚨 CVE-2026-46409
OpenYak is a local-first agent runtime for reliable tool-using models, with a desktop workspace built on top. Prior to version 1.1.3, the OpenYak desktop backend binds an HTTP API to `127.0.0.1:<random port>` (commonly 19141) without server-side Origin validation, loopback authentication, or Content-Type enforcement, and with a wildcard CORS policy. Any webpage a user visits while OpenYak is running can issue cross-origin requests to this local server — the browser acts as a proxy into loopback, bypassing OS-level network isolation. Chained, this lets a malicious page execute arbitrary shell commands on the host (RCE) via the build agent with `permission_presets.bash=true`, shut down the service, and exfiltrate chat history and account PII — with no user interaction beyond opening the page. Version 1.1.3 patches the issue.

🎖@cveNotify

🚨 CVE-2026-47127
Ghostfolio is an open source wealth management software. Prior to version 3.4.0, Ghostfolio's Stripe checkout success-URL handler at `GET /api/v1/subscription/stripe/callback?checkoutSessionId=<id>` retrieves the Stripe Checkout Session by ID and unconditionally grants a Premium subscription to the session's `client_reference_id` — without ever checking `session.payment_status` or `session.status`. There is no separate Stripe webhook endpoint with `stripe-signature` verification; this callback is the sole code path that creates Stripe-driven subscriptions. Any authenticated user can self-grant a 1-year Premium subscription without ever paying. Version 3.4.0 rejects sessions unless `session.payment_status === 'paid'` AND `session.status === 'complete'` (fails closed). Additionally, new unique `stripeCheckoutSessionId` column → a session can't be redeemed twice (race-safe via DB unique constraint).

🎖@cveNotify

🚨 CVE-2026-47249
Klever-Go is the Go implementation of the Klever blockchain protocol. Prior to 1.7.18, the P2P resolver request handling logic is vulnerable to hash-array amplification. A connected peer can send a compressed RequestDataType_HashArrayType direct request that is only 442 bytes on the wire but expands into 200,000 decoded hash entries inside the resolver path. The resolver's antiflood logic counts only a single logical message and the compressed wire size, and while Batch.Decompress() caps the decompressed byte size, it never limits the number of decoded repeated-field items. As a result, both TxResolver and TrieNodeResolver preallocate and iterate over the entire unchecked set of decoded hashes, causing remote memory and CPU amplification against any node that accepts P2P peer connections. This issue is fixed in version 1.7.18.

🎖@cveNotify

🚨 CVE-2026-48026
lakeFS is an open-source tool that transforms object storage into a Git-like repositories. Prior to version 1.81.1 of the open source edition and 1.84.0 of the enterprise edition, lakeFS Web UI renders markdown files from repository objects without sanitizing the resulting HTML. A user with write access to any repository branch can commit a `.md` object containing arbitrary HTML/JavaScript. Any other user who opens that object, or who navigates to a repository or directory containing a malicious `README.md`, executes the attacker-supplied script in their own authenticated session. lakeFS fixes the issue in v1.81.1 and lakeFS Enterprise fixes the issue in in v1.84.0. Enterprise customers using older versions can temporarily disable Markdown rendering by adding YAML to their config. No workaround exists for OSS release. Users are advised to upgrade to the latest version for both lakeFS and lakeFS-Enterprise.

🎖@cveNotify

🚨 CVE-2026-48047
XWiki Platform WebJars API is a package for XWiki, a generic wiki platform. Starting with version 9.6-rc-1 and prior to versions 16.10.17, 17.4.9, and 17.10.3, a potential path traversal vulnerability allow an attacker who manages to get a malicious WebJar extension installed on the wiki to write arbitrary files. While the consequences could be severe like overriding configuration files and setting the superadmin password, the attack first requires that the attacker already has admin access to at least a subwiki to be able to install a malicious extension. Further, the attacker needs to publish a malicious extension in an extension repository that is configured in the instance. This vulnerability has been patched in XWiki 16.10.17, 17.4.9, 17.10.3, and 18.0.0RC1. XWiki is not aware of any workarounds except for being careful whom developers grant script and admin rights to.

🎖@cveNotify