🚨 CVE-2026-10686
Zephyr's IPv6 forwarding path re-sent routed unicast packets without ever decrementing the IPv6 hop limit. Both routing branches of ipv6_route_packet() (subsys/net/ip) were affected: the explicit-route path (net_route_packet()) and the on-link cross-interface path (net_route_packet_if()). Each set the packet forwarding flag and called net_send_data() with the hop limit untouched and no expiry check.
Per RFC 8200 the hop-limit decrement is the mechanism that bounds packet lifetime and terminates routing loops; without it, a device acting as an IPv6 router relays looping packets indefinitely. An on-path attacker who can induce or exploit a transient L3 loop turns it into a permanent forwarding storm, causing CPU/bandwidth resource exhaustion (availability DoS) on the forwarder and adjacent links; path-discovery and loop diagnostics that rely on hop-limit expiry are also defeated.
Affected configurations. In every affected release the forwarding path is reached via CONFIG_NET_ROUTE (enabled by default when CONFIG_NET_IPV6_NBR_CACHE is set), together with CONFIG_NET_ROUTING for cross-interface routing. Note that CONFIG_NET_IPV6_FORWARDING and CONFIG_NET_IPV4_FORWARDING — which appear in the fix and in this advisory's evidence notes — were introduced after v4.4.0, when the routing options were split and renamed; they do not exist in any affected release. When auditing a v4.4.1-or-earlier configuration, look for CONFIG_NET_ROUTE and CONFIG_NET_ROUTING.
IPv4 is not affected in any release. The IPv4 forwarding path (net_route_ipv4_packet() in route_ipv4.c) was added after v4.4.0 and has never shipped in a release. Its TTL decrement and IPv4 header-checksum recomputation landed on main as part of the same fix, so the evidence notes below discuss it, but no released version is reachable by way of IPv4.
Affected releases are v1.8.0 through v4.4.1: v1.8.0 introduced net_route_packet() and v2.2.0 added net_route_packet_if(), and neither decremented the hop limit. v4.3.1 carries the explicit-route fix but not the on-link one, so it is affected as well. Fixed on main by 7d8f1afa7345 (explicit-route path) and 589eadc74efa (on-link path).
🎖@cveNotify
Zephyr's IPv6 forwarding path re-sent routed unicast packets without ever decrementing the IPv6 hop limit. Both routing branches of ipv6_route_packet() (subsys/net/ip) were affected: the explicit-route path (net_route_packet()) and the on-link cross-interface path (net_route_packet_if()). Each set the packet forwarding flag and called net_send_data() with the hop limit untouched and no expiry check.
Per RFC 8200 the hop-limit decrement is the mechanism that bounds packet lifetime and terminates routing loops; without it, a device acting as an IPv6 router relays looping packets indefinitely. An on-path attacker who can induce or exploit a transient L3 loop turns it into a permanent forwarding storm, causing CPU/bandwidth resource exhaustion (availability DoS) on the forwarder and adjacent links; path-discovery and loop diagnostics that rely on hop-limit expiry are also defeated.
Affected configurations. In every affected release the forwarding path is reached via CONFIG_NET_ROUTE (enabled by default when CONFIG_NET_IPV6_NBR_CACHE is set), together with CONFIG_NET_ROUTING for cross-interface routing. Note that CONFIG_NET_IPV6_FORWARDING and CONFIG_NET_IPV4_FORWARDING — which appear in the fix and in this advisory's evidence notes — were introduced after v4.4.0, when the routing options were split and renamed; they do not exist in any affected release. When auditing a v4.4.1-or-earlier configuration, look for CONFIG_NET_ROUTE and CONFIG_NET_ROUTING.
IPv4 is not affected in any release. The IPv4 forwarding path (net_route_ipv4_packet() in route_ipv4.c) was added after v4.4.0 and has never shipped in a release. Its TTL decrement and IPv4 header-checksum recomputation landed on main as part of the same fix, so the evidence notes below discuss it, but no released version is reachable by way of IPv4.
Affected releases are v1.8.0 through v4.4.1: v1.8.0 introduced net_route_packet() and v2.2.0 added net_route_packet_if(), and neither decremented the hop limit. v4.3.1 carries the explicit-route fix but not the on-link one, so it is affected as well. Fixed on main by 7d8f1afa7345 (explicit-route path) and 589eadc74efa (on-link path).
🎖@cveNotify
GitHub
net: ip: Mark only cross-interface traffic forwarded · zephyrproject-rtos/zephyr@7d8f1af
Route handling can legitimately resend a packet on the same
interface when a route lookup or on-link lookup keeps the
original egress interface. Those packets are routed, but they
must not be treat...
interface when a route lookup or on-link lookup keeps the
original egress interface. Those packets are routed, but they
must not be treat...
🚨 CVE-2026-34641
Premiere Pro is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.
🎖@cveNotify
Premiere Pro is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.
🎖@cveNotify
Adobe
Adobe Security Bulletin
Security Updates Available for Adobe Premiere Pro | APSB26-76
🚨 CVE-2026-9044
An OS command injection vulnerability exists in the VPN module of TP-Link AXE75 V1 routers. This vulnerability allows an adjacent, authenticated attacker to execute arbitrary commands on the device by importing a specially crafted VPN client configuration file. The issue arises from improper filtering of special characters.
Successful exploitation of this vulnerability may enable an attacker to gain full control of the affected device, potentially compromising configuration integrity, network security, and service availability.
🎖@cveNotify
An OS command injection vulnerability exists in the VPN module of TP-Link AXE75 V1 routers. This vulnerability allows an adjacent, authenticated attacker to execute arbitrary commands on the device by importing a specially crafted VPN client configuration file. The issue arises from improper filtering of special characters.
Successful exploitation of this vulnerability may enable an attacker to gain full control of the affected device, potentially compromising configuration integrity, network security, and service availability.
🎖@cveNotify
TP-Link
Download for Archer AXE75 | TP-Link
TP Link - Download Center Detail
🚨 CVE-2026-18536
Data::Entropy versions before 0.010 for Perl read remote entropy sources over plain HTTP.
The Data::Entropy::RawSource::RandomOrg and Data::Entropy::RawSource::RandomnumbersInfo remote sources are accessed over plain HTTP.
The Data::Entropy::RawSource::RandomOrg integrity check trivially matches any non-empty byte string.
Any on-path attacker, such as open WiFi, a compromised ISP, captive portal, or a hostile egress proxy substitutes the response and thereby chooses the bytes returned by rand_bits and rand_int for every application that selected one of these sources via with_entropy_source. The _checkbuf method response is equally attacker-controlled, so the retry/sleep behaviour is steerable too.
🎖@cveNotify
Data::Entropy versions before 0.010 for Perl read remote entropy sources over plain HTTP.
The Data::Entropy::RawSource::RandomOrg and Data::Entropy::RawSource::RandomnumbersInfo remote sources are accessed over plain HTTP.
The Data::Entropy::RawSource::RandomOrg integrity check trivially matches any non-empty byte string.
Any on-path attacker, such as open WiFi, a compromised ISP, captive portal, or a hostile egress proxy substitutes the response and thereby chooses the bytes returned by rand_bits and rand_int for every application that selected one of these sources via with_entropy_source. The _checkbuf method response is equally attacker-controlled, so the retry/sleep behaviour is steerable too.
🎖@cveNotify
GitHub
Data::Entropy::RawSource::RandomOrg requests data from random.org over unsecured http
<!-- title: Data::Entropy: remote entropy sources fetch over plain HTTP with no integrity check, so an on-path attacker chooses the "randomness" -->
<!-- cna-triage-id: data-ent...
<!-- cna-triage-id: data-ent...
🚨 CVE-2026-47616
NVIDIA Dynamo for Linux contains a vulnerability in the multimodal media fetcher where an attacker may cause server-side request forgery. A successful exploit of this vulnerability might lead to information disclosure.
🎖@cveNotify
NVIDIA Dynamo for Linux contains a vulnerability in the multimodal media fetcher where an attacker may cause server-side request forgery. A successful exploit of this vulnerability might lead to information disclosure.
🎖@cveNotify
GitHub
product-security/2026/5842 at main · NVIDIA/product-security
Starting October 1, 2025, NVIDIA PSIRT will publish an initial set of security bulletins on GitHub in Markdown, CSAF, and CVE formats. Coverage will expand over time, while all bulletins remain ava...
🚨 CVE-2026-59118
Improper authorization in Microsoft Power Apps allows an unauthorized attacker to elevate privileges over a network.
🎖@cveNotify
Improper authorization in Microsoft Power Apps allows an unauthorized attacker to elevate privileges over a network.
🎖@cveNotify
🚨 CVE-2026-62836
Improper restriction of communication channel to intended endpoints in Azure SQL Managed Instance allows an unauthorized attacker to elevate privileges over a network.
🎖@cveNotify
Improper restriction of communication channel to intended endpoints in Azure SQL Managed Instance allows an unauthorized attacker to elevate privileges over a network.
🎖@cveNotify
🚨 CVE-2026-62918
Improper verification of cryptographic signature in Microsoft Teams allows an unauthorized attacker to perform spoofing over a network.
🎖@cveNotify
Improper verification of cryptographic signature in Microsoft Teams allows an unauthorized attacker to perform spoofing over a network.
🎖@cveNotify
🚨 CVE-2026-65668
Improper access control in Microsoft Purview eDiscovery allows an authorized attacker to elevate privileges over a network.
🎖@cveNotify
Improper access control in Microsoft Purview eDiscovery allows an authorized attacker to elevate privileges over a network.
🎖@cveNotify
🚨 CVE-2026-68823
Exposed dangerous method or function in Azure Confidential Ledger allows an authorized attacker to execute code over a network.
🎖@cveNotify
Exposed dangerous method or function in Azure Confidential Ledger allows an authorized attacker to execute code over a network.
🎖@cveNotify
🚨 CVE-2022-2196
A regression exists in the Linux Kernel within KVM: nVMX that allowed for speculative execution attacks. L2 can carry out Spectre v2 attacks on L1 due to L1 thinking it doesn't need retpolines or IBPB after running L2 due to KVM (L0) advertising eIBRS support to L1. An attacker at L2 with code execution can execute code on an indirect branch on the host machine. We recommend upgrading to Kernel 6.2 or applying the relevant stable backports (v5.4.233, v5.10.170, v5.15.96, v6.1.14).
🎖@cveNotify
A regression exists in the Linux Kernel within KVM: nVMX that allowed for speculative execution attacks. L2 can carry out Spectre v2 attacks on L1 due to L1 thinking it doesn't need retpolines or IBPB after running L2 due to KVM (L0) advertising eIBRS support to L1. An attacker at L2 with code execution can execute code on an indirect branch on the host machine. We recommend upgrading to Kernel 6.2 or applying the relevant stable backports (v5.4.233, v5.10.170, v5.15.96, v6.1.14).
🎖@cveNotify
🚨 CVE-2023-2235
A use-after-free vulnerability in the Linux Kernel Performance Events system can be exploited to achieve local privilege escalation.
The perf_group_detach function did not check the event's siblings' attach_state before calling add_event_to_groups(), but remove_on_exec made it possible to call list_del_event() on before detaching from their group, making it possible to use a dangling pointer causing a use-after-free vulnerability.
We recommend upgrading past commit fd0815f632c24878e325821943edccc7fde947a2.
🎖@cveNotify
A use-after-free vulnerability in the Linux Kernel Performance Events system can be exploited to achieve local privilege escalation.
The perf_group_detach function did not check the event's siblings' attach_state before calling add_event_to_groups(), but remove_on_exec made it possible to call list_del_event() on before detaching from their group, making it possible to use a dangling pointer causing a use-after-free vulnerability.
We recommend upgrading past commit fd0815f632c24878e325821943edccc7fde947a2.
🎖@cveNotify
🚨 CVE-2024-1086
A use-after-free vulnerability in the Linux kernel's netfilter: nf_tables component can be exploited to achieve local privilege escalation.
The nft_verdict_init() function allows positive values as drop error within the hook verdict, and hence the nf_hook_slow() function can cause a double free vulnerability when NF_DROP is issued with a drop error which resembles NF_ACCEPT.
We recommend upgrading past commit f342de4e2f33e0e39165d8639387aa6c19dff660.
🎖@cveNotify
A use-after-free vulnerability in the Linux kernel's netfilter: nf_tables component can be exploited to achieve local privilege escalation.
The nft_verdict_init() function allows positive values as drop error within the hook verdict, and hence the nf_hook_slow() function can cause a double free vulnerability when NF_DROP is issued with a drop error which resembles NF_ACCEPT.
We recommend upgrading past commit f342de4e2f33e0e39165d8639387aa6c19dff660.
🎖@cveNotify
🚨 CVE-2025-58375
Frappe is a full-stack web application framework. Versions 14.96.9 and below, and 15.0.0 through 15.71.0 have an insecure endpoint parameter that is vulnerable to error-based SQL Injection through lack of validation. Sensitive information such as versioning can be retrieved. This issue is fixed in versions 14.96.10 and 15.72.0.
🎖@cveNotify
Frappe is a full-stack web application framework. Versions 14.96.9 and below, and 15.0.0 through 15.71.0 have an insecure endpoint parameter that is vulnerable to error-based SQL Injection through lack of validation. Sensitive information such as versioning can be retrieved. This issue is fixed in versions 14.96.10 and 15.72.0.
🎖@cveNotify
GitHub
fix(tag): use db.set_value (backport #33072) (#33073) · frappe/frappe@2dab009
* fix(tag): use db.set_value (#33072)
Signed-off-by: Akhil Narang <me@akhilnarang.dev>
(cherry picked from commit 09060637fac62cb8c3cdd41b685d39146959cff6)
# Conflicts:
#
frappe/des...
Signed-off-by: Akhil Narang <me@akhilnarang.dev>
(cherry picked from commit 09060637fac62cb8c3cdd41b685d39146959cff6)
# Conflicts:
#
frappe/des...
🚨 CVE-2026-56160
Improper authorization in Azure Red Hat OpenShift (ARO) allows an authorized attacker to elevate privileges over a network.
🎖@cveNotify
Improper authorization in Azure Red Hat OpenShift (ARO) allows an authorized attacker to elevate privileges over a network.
🎖@cveNotify
🚨 CVE-2026-62825
Improper authentication in Azure Key Vault allows an unauthorized attacker to elevate privileges over a network.
🎖@cveNotify
Improper authentication in Azure Key Vault allows an unauthorized attacker to elevate privileges over a network.
🎖@cveNotify
🚨 CVE-2026-16463
A maliciously crafted DXF file, when parsed through Autodesk AutoCAD, can force a Heap-Based Overflow vulnerability. A malicious actor can leverage this vulnerability to cause a crash, read sensitive data, or execute arbitrary code in the context of the current process.
🎖@cveNotify
A maliciously crafted DXF file, when parsed through Autodesk AutoCAD, can force a Heap-Based Overflow vulnerability. A malicious actor can leverage this vulnerability to cause a crash, read sensitive data, or execute arbitrary code in the context of the current process.
🎖@cveNotify
Autodesk
Autodesk Access | Formerly Autodesk Desktop App | Autodesk
Autodesk Access simplifies the update experience. Quickly and easily install updates for your desktop products from the app. Download now for free.
🚨 CVE-2026-16465
A maliciously crafted DWG or DXF file, when parsed through Autodesk AutoCAD, can force an Out-of-Bounds Read vulnerability. A malicious actor can leverage this vulnerability to cause a crash or disclose sensitive information.
🎖@cveNotify
A maliciously crafted DWG or DXF file, when parsed through Autodesk AutoCAD, can force an Out-of-Bounds Read vulnerability. A malicious actor can leverage this vulnerability to cause a crash or disclose sensitive information.
🎖@cveNotify
Autodesk
Autodesk Access | Formerly Autodesk Desktop App | Autodesk
Autodesk Access simplifies the update experience. Quickly and easily install updates for your desktop products from the app. Download now for free.
🚨 CVE-2026-17550
A maliciously crafted DWG or DXF file, when parsed through Autodesk AutoCAD, can force an Out-of-Bounds Read vulnerability. A malicious actor can leverage this vulnerability to cause a crash or disclose sensitive information.
🎖@cveNotify
A maliciously crafted DWG or DXF file, when parsed through Autodesk AutoCAD, can force an Out-of-Bounds Read vulnerability. A malicious actor can leverage this vulnerability to cause a crash or disclose sensitive information.
🎖@cveNotify
Autodesk
Autodesk Access | Formerly Autodesk Desktop App | Autodesk
Autodesk Access simplifies the update experience. Quickly and easily install updates for your desktop products from the app. Download now for free.
🚨 CVE-2026-24253
NVIDIA Dynamo for Linux contains a vulnerability where an attacker could cause an out-of-bounds write. A successful exploit of this vulnerability might lead to denial of service and data tampering.
🎖@cveNotify
NVIDIA Dynamo for Linux contains a vulnerability where an attacker could cause an out-of-bounds write. A successful exploit of this vulnerability might lead to denial of service and data tampering.
🎖@cveNotify
GitHub
product-security/2026/5842 at main · NVIDIA/product-security
Starting October 1, 2025, NVIDIA PSIRT will publish an initial set of security bulletins on GitHub in Markdown, CSAF, and CVE formats. Coverage will expand over time, while all bulletins remain ava...
🚨 CVE-2026-24254
NVIDIA Dynamo for Linux contains a vulnerability in the multimodal serving topology, where an attacker could cause an out-of-bounds write. A successful exploit of this vulnerability might lead to code execution, escalation of privileges, data tampering, denial of service, and information disclosure.
🎖@cveNotify
NVIDIA Dynamo for Linux contains a vulnerability in the multimodal serving topology, where an attacker could cause an out-of-bounds write. A successful exploit of this vulnerability might lead to code execution, escalation of privileges, data tampering, denial of service, and information disclosure.
🎖@cveNotify
GitHub
product-security/2026/5842 at main · NVIDIA/product-security
Starting October 1, 2025, NVIDIA PSIRT will publish an initial set of security bulletins on GitHub in Markdown, CSAF, and CVE formats. Coverage will expand over time, while all bulletins remain ava...