🚨 CVE-2026-61891
In Eclipse Theia versions up to and including 1.73.1, the `@theia/filesystem` backend exposes HTTP file-download endpoints (`GET /file`, `GET /files/`, `PUT /files/`) that convert a client-supplied URI directly to a filesystem path and stream the file, without confining it to the workspace or any allow-listed root. In browser (non-Electron) deployments the connection token is enforced only on WebSocket upgrades; the HTTP middleware in `@theia/core` re-issues the cookie and calls `next()` without rejecting tokenless HTTP requests, so these endpoints are reachable without a valid token. As a result an unauthenticated client can read any file readable by the backend process, including files outside the opened workspace (for example `/etc/hosts`, SSH keys, or tokens). Electron mode uses a separate `ElectronSecurityToken` and is not affected via this path.

🎖@cveNotify

🚨 CVE-2026-64564
In the Linux kernel, the following vulnerability has been resolved:

sctp: don't free the ASCONF's own transport in DEL-IP processing

sctp_process_asconf() caches the transport the ASCONF chunk is processed
against in asconf->transport (== chunk->transport, set once in sctp_rcv()).
For an ASCONF located through its Address Parameter by
__sctp_rcv_asconf_lookup(), that cached transport corresponds to the
Address Parameter, which need not be the packet's source address.

sctp_process_asconf_param() rejects a DEL-IP for the packet source address
(ADDIP D8, SCTP_ERROR_DEL_SRC_IP), but nothing protects asconf->transport.
A single ASCONF can therefore carry, in order:

[Address Parameter L] [DEL-IP L] [DEL-IP 0.0.0.0]

where L differs from the source. The DEL-IP for L passes the D8 check and
calls sctp_assoc_rm_peer() on the transport that asconf->transport still
points at, freeing it (RCU-deferred). The following wildcard DEL-IP then
reuses the now-dangling asconf->transport in sctp_assoc_set_primary() and
sctp_assoc_del_nonprimary_peers(): set_primary() dereferences the freed
transport (->ipaddr, ->state) and plants the dangling pointer into
asoc->peer.primary_path / active_path, and del_nonprimary_peers(), keeping
only the pointer that is no longer on the list, removes every real
transport, leaving the association with a transport_count of 0 and
primary_path/active_path pointing at freed memory.

Reject a DEL-IP that targets the transport the ASCONF is being processed
against, mirroring the existing source-address guard, so the wildcard
branch can never reuse a freed transport.

🎖@cveNotify

🚨 CVE-2024-39024
In Packetfence 13.2.0, the WebGui interface setting allows authenticated remote code execution.

🎖@cveNotify

🚨 CVE-2026-11803
A maliciously crafted PDF file, when parsed through Autodesk Revit, can force an Out-of-Bounds Read vulnerability. A malicious actor can leverage this vulnerability to cause a crash, read sensitive data, or execute arbitrary code in the context of the current process.

🎖@cveNotify

🚨 CVE-2026-12584
The Payment Gateway for Redsys & WooCommerce Lite WordPress plugin before 7.0.2 does not verify the authenticity of incoming payment-provider notifications for one of its payment methods before marking orders as paid, allowing unauthenticated attackers to forge a payment-confirmation callback and complete their own orders without paying.

🎖@cveNotify

🚨 CVE-2026-18487
A flaw was found in Epiphany. An issue in how the browser reads web addresses allows attackers to fake the domain name shown in the address bar. If a user clicks a specially crafted link containing a colon (for example, [https://trusted.com:80@attacker.com/](https://trusted.com:80@attacker.com/)), the address bar and security menus will display the safe website (trusted.com) but it will actually load the attacker website (attacker.com) on the screen. This allows attackers to create convincing phishing pages to trick users into trusting a malicious site.

🎖@cveNotify

🚨 CVE-2026-19060
A vulnerability was identified in FoundationAgents MetaGPT up to 0.8.2. This impacts an unknown function. Such manipulation leads to code injection. The attack needs to be performed locally. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

🎖@cveNotify

🚨 CVE-2026-19066
A vulnerability was identified in SourceCodester Online Examination & Learning Management System 1.0. Impacted is an unknown function of the file view_students.php. Such manipulation of the argument class_group leads to authorization bypass. The attack may be launched remotely.

🎖@cveNotify

🚨 CVE-2026-1289
A maliciously crafted PDF file, when parsed through Autodesk Revit, can force a Use-After-Free vulnerability. A malicious actor can leverage this vulnerability to cause a crash, disclose sensitive data, or execute arbitrary code in the context of the current process.

🎖@cveNotify

🚨 CVE-2026-43628
llama.cpp builds b3978 through b9058 contain an integer underflow and out-of-bounds read vulnerability in the DRY sampler that allows unauthenticated attackers to trigger a heap buffer underflow by sending a crafted HTTP request with dry_allowed_length set to INT32_MIN to the /v1/completions or /v1/chat/completions endpoints. Attackers can exploit this vulnerability to crash the server with SIGSEGV causing denial of service for all connected users, or corrupt token sampling probabilities by reading garbage values from memory before the allocated buffer.

🎖@cveNotify

🚨 CVE-2026-45415
Decidim is a participatory democracy framework. Prior to 0.30.9, from 0.31.0 before 0.31.5, and in 0.32.0.rc1 before 0.32.0.rc2, the /admin/csv_census/census_logs record-management endpoints do not enforce full administrator authorization before rendering or mutating Decidim::Verifications::CsvDatum, allowing a participant manager to create, alter, or remove census records. This issue is fixed in versions 0.30.9, 0.31.5, and 0.32.0.rc2.

🎖@cveNotify

🚨 CVE-2026-47765
Frappe is a full-stack web application framework. Prior to 15.110.0 and 16.20.0, the restore and bulk_restore endpoints do not apply the appropriate document permission checks, allowing an authenticated user to restore deleted documents without the required authorization. This issue is fixed in versions 15.110.0 and 16.20.0.

🎖@cveNotify

🚨 CVE-2026-48085
OpenReception's appointment booking software provides an end-to-end encrypted appointment booking platform. Prior to version 1.0.1, a fully provisioned OpenReception instance accepts unauthenticated POST requests to `/setup/create-admin-account` and creates additional GLOBAL_ADMIN accounts without verifying that an admin already exists. Any unauthenticated network attacker who can submit a same-origin form POST gains full platform-level administrative control. The newly created account is `is_active=true` with `confirmation_state=ACCESS_GRANTED` and does not require completing email confirmation; the GLOBAL_ADMIN row is created active and immediately usable. Login and tenant enumeration succeed without any further interaction. This is distinct from the deployment race condition already documented on the `Claiming an instance` page. That documented race covers the window between deployment and first claim. The bug reported here works after the operator has properly claimed and configured the instance: the layout-level guard that protects the setup page only redirects on GET, while the `default` form action handler creates the user without rechecking `adminExists()`. Three GLOBAL_ADMIN accounts were created in succession during testing, with no rate limiting observed. Audit-specific event logging beyond standard application logs was not assessed; the standard `[error]` line that surfaces only when a uniqueness conflict is hit is not the same as a security event for "additional admin created post-claim". The form post is rejected for browser drive-by CSRF by SvelteKit's built-in same-origin check, but any tool that supplies a matching `Origin` header (curl, Burp, automated scanners, server-side proxies) bypasses this trivially. No additional preconditions exist. Users should upgrade to version 1.0.1 to receive a patch.

🎖@cveNotify

🚨 CVE-2026-53983
Ground Station prior to 0.6.0 contains an unauthenticated blind server-side request forgery vulnerability in the orbital-source configuration path that allows any unauthenticated Socket.IO client to cause the ground-station process to issue outbound HTTP requests to attacker-chosen destinations. Attackers can connect to the Socket.IO server on port 7000 without credentials due to disabled authentication enforcement and a wildcard CORS policy, then submit a data_submission event with submit-orbital-sources action to persist an attacker-supplied URL in the database, then trigger an orbital sync via the equally unauthenticated background_task:start event. The URL is stored with no scheme allowlist, no host validation, and no rejection of loopback, RFC1918, or link-local (cloud instance metadata at 169.254.169.254) addresses, and is passed directly to requests.get in _fetch_http_3le and _fetch_http_omm in backend/tlesync/source_adapters.py. HTTP status codes and error messages from the outbound request are emitted in the orbital_sync_state Socket.IO event to all connected clients, providing a serviceable oracle for interpreting internal-service and cloud-metadata responses even though the raw response body is not directly leaked. Because the malicious source persists in the database across restarts and re-fires every 24 hours on the scheduled sync cycle, the primitive gives durable long-term SSRF without the attacker needing to remain connected.

🎖@cveNotify

🚨 CVE-2026-63725
sysPass's FileBackupService::doBackupFiles() in lib/SP/Services/Backup/FileBackupService.php around line 388 builds a tar shell command by string-concatenating the backup directory path $this->path directly into the command line ('tar czf ' . $backupFileApp . ' ' . BASE_PATH . ' --exclude \"' . $this->path . '\" 2>&1') and passes the result to PHP's exec() with no application of escapeshellarg() and no validation of the path against a safe character set. The $this->path value is read from the sysPass configuration, which is persisted in the database and writable through the admin settings API and the admin UI. An administrator (or an attacker who has obtained an admin API token or admin session) can therefore store a backup path containing shell metacharacters and trigger a backup operation to execute arbitrary OS commands as the web server process user (typically www-data or apache). Because sysPass is a password manager whose sole purpose is to hold credentials for other systems, code execution as the web-server user permits reading sysPass's master password and encryption key from memory or configuration files, decrypting every stored credential in the database, exporting the entire password vault, pivoting to internal systems using the disclosed credentials, and installing persistent backdoors on the password-manager host.

🎖@cveNotify

🚨 CVE-2026-64664
Statamic is a Laravel and Git powered content management system (CMS). Prior to 5.74.1 and 6.24.0, an authenticated Control Panel user could use an endpoint intended for the user creation wizard to determine if a given email address belonged to an existing user, without having permission to view users, though the endpoint only exposed user existence and not any other user data. This issue is fixed in versions 5.74.1 and 6.24.0.

🎖@cveNotify

🚨 CVE-2026-67434
PHP_CodeSniffer tokenizes PHP files and detects violations of a defined set of coding standards. Prior to versions 3.13.6 and 4.0.2, PHP_CodeSniffer contains a command injection vulnerability in the code that generates the Gitblame, Hgblame, and Svnblame report formats. As a result, running PHP_CodeSniffer over untrusted files, for example in a continuous integration pipeline that scans pull requests, or on a developer machine reviewing third party code, could result in attacker controlled shell commands being executed when the Gitblame, Hgblame, or Svnblame report processes a file whose name contains shell metacharacters. Users using the default Full report, or any of the other non-blame reports, are not affected. Users on a runtime platform which does not allow filenames to contain shell metacharacters, such as " and ;, are not affected. This issue is fixed in versions 3.13.6 and 4.0.2.

🎖@cveNotify

🚨 CVE-2026-67687
Insecure Permissions vulnerability in ics-park v.2.0 allows a remote attacker to escalate privileges via the /system/role/save endpoint in RoleController.java and system/user/update endpoint in UserController.java

🎖@cveNotify

🚨 CVE-2026-67688
ICS-Park Smart Park Management System v2.0 contains an unrestricted file upload vulnerability in the file upload module. This allows a remote attacker to execute arbitrary code.

🎖@cveNotify

🚨 CVE-2026-70638
llama.cpp builds b1886 through b7445 contain an integer overflow vulnerability in the LLaMA-Android JNI wrapper where the new_1batch() function multiplies sizeof(llama_seq_id) by an attacker-controlled n_seq_max parameter without overflow validation, causing heap buffer allocation to wrap and allocate insufficient memory. Attackers can exploit this by providing a crafted n_seq_max value through a malicious model file or JNI call to trigger heap corruption and achieve denial of service or arbitrary code execution on Android applications using the LLaMA-Android binding.

🎖@cveNotify

🚨 CVE-2026-71324
Traefik is an open source HTTP reverse proxy and load balancer. Prior to 2.11.53, 3.6.24, and 3.7.9, Traefik's default HTTP reverse proxy forwards a plain HTTP/2 or HTTP/3 CONNECT request and its body to an HTTP/1.1 upstream through a shared net/http.Transport. When the upstream answers the CONNECT with a keep-alive non-2xx response and does not drain the body, Traefik returns the desynchronized backend socket to its shared pool and reuses it for other clients. An unauthenticated attacker can use this behavior to make a different client read the attacker's smuggled response, which can include authenticated or private content from another request. The ForwardAuth middleware with forwardBody true and preserveRequestMethod true can re-issue a CONNECT with the buffered body attached, exposing the auth-client pool to the same desynchronization. This issue is fixed in 2.11.53, 3.6.24, and 3.7.9.

🎖@cveNotify