🚨 CVE-2025-56005
An undocumented and unsafe feature in the PLY (Python Lex-Yacc) library 3.11 allows Remote Code Execution (RCE) via the `picklefile` parameter in the `yacc()` function. This parameter accepts a `.pkl` file that is deserialized with `pickle.load()` without validation. Because `pickle` allows execution of embedded code via `__reduce__()`, an attacker can achieve code execution by passing a malicious pickle file. The parameter is not mentioned in official documentation or the GitHub repository, yet it is active in the PyPI version. This introduces a stealthy backdoor and persistence risk. NOTE: A third-party states that this vulnerability should be rejected because the proof of concept does not demonstrate arbitrary code execution and fails to complete successfully.
🎖@cveNotify
An undocumented and unsafe feature in the PLY (Python Lex-Yacc) library 3.11 allows Remote Code Execution (RCE) via the `picklefile` parameter in the `yacc()` function. This parameter accepts a `.pkl` file that is deserialized with `pickle.load()` without validation. Because `pickle` allows execution of embedded code via `__reduce__()`, an attacker can achieve code execution by passing a malicious pickle file. The parameter is not mentioned in official documentation or the GitHub repository, yet it is active in the PyPI version. This introduces a stealthy backdoor and persistence risk. NOTE: A third-party states that this vulnerability should be rejected because the proof of concept does not demonstrate arbitrary code execution and fails to complete successfully.
🎖@cveNotify
GitHub
GitHub - bohmiiidd/Undocumented-RCE-in-PLY: Undocumented RCE in PLY via `picklefile` Parameter
Undocumented RCE in PLY via `picklefile` Parameter - bohmiiidd/Undocumented-RCE-in-PLY
🚨 CVE-2025-13465
Lodash versions 4.0.0 through 4.17.22 are vulnerable to prototype pollution in the _.unset and _.omit functions. An attacker can pass crafted paths which cause Lodash to delete methods from global prototypes.
The issue permits deletion of properties but does not allow overwriting their original behavior.
This issue is patched on 4.17.23
🎖@cveNotify
Lodash versions 4.0.0 through 4.17.22 are vulnerable to prototype pollution in the _.unset and _.omit functions. An attacker can pass crafted paths which cause Lodash to delete methods from global prototypes.
The issue permits deletion of properties but does not allow overwriting their original behavior.
This issue is patched on 4.17.23
🎖@cveNotify
GitHub
Prototype Pollution Vulnerability in Lodash `_.unset` and `_.omit` functions
### Impact
Lodash versions 4.0.0 through 4.17.22 are vulnerable to prototype pollution in the `_.unset` and `_.omit` functions. An attacker can pass crafted paths which cause Lodash to delete me...
Lodash versions 4.0.0 through 4.17.22 are vulnerable to prototype pollution in the `_.unset` and `_.omit` functions. An attacker can pass crafted paths which cause Lodash to delete me...
🚨 CVE-2026-24486
Python-Multipart is a streaming multipart parser for Python. Prior to version 0.0.22, a Path Traversal vulnerability exists when using non-default configuration options `UPLOAD_DIR` and `UPLOAD_KEEP_FILENAME=True`. An attacker can write uploaded files to arbitrary locations on the filesystem by crafting a malicious filename. Users should upgrade to version 0.0.22 to receive a patch or, as a workaround, avoid using `UPLOAD_KEEP_FILENAME=True` in project configurations.
🎖@cveNotify
Python-Multipart is a streaming multipart parser for Python. Prior to version 0.0.22, a Path Traversal vulnerability exists when using non-default configuration options `UPLOAD_DIR` and `UPLOAD_KEEP_FILENAME=True`. An attacker can write uploaded files to arbitrary locations on the filesystem by crafting a malicious filename. Users should upgrade to version 0.0.22 to receive a patch or, as a workaround, avoid using `UPLOAD_KEEP_FILENAME=True` in project configurations.
🎖@cveNotify
GitHub
Merge commit from fork · Kludex/python-multipart@9433f4b
A streaming multipart parser for Python. Contribute to Kludex/python-multipart development by creating an account on GitHub.
🚨 CVE-2025-61726
The net/url package does not set a limit on the number of query parameters in a query. While the maximum size of query parameters in URLs is generally limited by the maximum request header size, the net/http.Request.ParseForm method can parse large URL-encoded forms. Parsing a large form containing many unique query parameters can cause excessive memory consumption.
🎖@cveNotify
The net/url package does not set a limit on the number of query parameters in a query. While the maximum size of query parameters in URLs is generally limited by the maximum request header size, the net/http.Request.ParseForm method can parse large URL-encoded forms. Parsing a large form containing many unique query parameters can cause excessive memory consumption.
🎖@cveNotify
🚨 CVE-2026-26278
fast-xml-parser allows users to validate XML, parse XML to JS object, or build XML from JS object without C/C++ based libraries and no callback. In versions 4.1.3 through 5.3.5, the XML parser can be forced to do an unlimited amount of entity expansion. With a very small XML input, it’s possible to make the parser spend seconds or even minutes processing a single request, effectively freezing the application. Version 5.3.6 fixes the issue. As a workaround, avoid using DOCTYPE parsing by `processEntities: false` option.
🎖@cveNotify
fast-xml-parser allows users to validate XML, parse XML to JS object, or build XML from JS object without C/C++ based libraries and no callback. In versions 4.1.3 through 5.3.5, the XML parser can be forced to do an unlimited amount of entity expansion. With a very small XML input, it’s possible to make the parser spend seconds or even minutes processing a single request, effectively freezing the application. Version 5.3.6 fixes the issue. As a workaround, avoid using DOCTYPE parsing by `processEntities: false` option.
🎖@cveNotify
GitHub
fix entities performance & security issues · NaturalIntelligence/fast-xml-parser@910dae5
new options to process entities safely are added
🚨 CVE-2026-25896
fast-xml-parser allows users to validate XML, parse XML to JS object, or build XML from JS object without C/C++ based libraries and no callback. From 4.1.3to before 5.3.5, a dot (.) in a DOCTYPE entity name is treated as a regex wildcard during entity replacement, allowing an attacker to shadow built-in XML entities (<, >, &, ", ') with arbitrary values. This bypasses entity encoding and leads to XSS when parsed output is rendered. This vulnerability is fixed in 5.3.5.
🎖@cveNotify
fast-xml-parser allows users to validate XML, parse XML to JS object, or build XML from JS object without C/C++ based libraries and no callback. From 4.1.3to before 5.3.5, a dot (.) in a DOCTYPE entity name is treated as a regex wildcard during entity replacement, allowing an attacker to shadow built-in XML entities (<, >, &, ", ') with arbitrary values. This bypasses entity encoding and leads to XSS when parsed output is rendered. This vulnerability is fixed in 5.3.5.
🎖@cveNotify
GitHub
fix: Escape regex char in entity name · NaturalIntelligence/fast-xml-parser@943ef0e
Validate XML, Parse XML and Build XML rapidly without C/C++ based libraries and no callback. - fix: Escape regex char in entity name · NaturalIntelligence/fast-xml-parser@943ef0e
🚨 CVE-2026-25679
url.Parse insufficiently validated the host/authority component and accepted some invalid URLs.
🎖@cveNotify
url.Parse insufficiently validated the host/authority component and accepted some invalid URLs.
🎖@cveNotify
🚨 CVE-2026-32280
During chain building, the amount of work that is done is not correctly limited when a large number of intermediate certificates are passed in VerifyOptions.Intermediates, which can lead to a denial of service. This affects both direct users of crypto/x509 and users of crypto/tls.
🎖@cveNotify
During chain building, the amount of work that is done is not correctly limited when a large number of intermediate certificates are passed in VerifyOptions.Intermediates, which can lead to a denial of service. This affects both direct users of crypto/x509 and users of crypto/tls.
🎖@cveNotify
🚨 CVE-2026-32283
If one side of the TLS connection sends multiple key update messages post-handshake in a single record, the connection can deadlock, causing uncontrolled consumption of resources. This can lead to a denial of service. This only affects TLS 1.3.
🎖@cveNotify
If one side of the TLS connection sends multiple key update messages post-handshake in a single record, the connection can deadlock, causing uncontrolled consumption of resources. This can lead to a denial of service. This only affects TLS 1.3.
🎖@cveNotify
🚨 CVE-2025-62718
Axios is a promise based HTTP client for the browser and Node.js. Prior to 1.15.0 and 0.31.0, Axios does not correctly handle hostname normalization when checking NO_PROXY rules. Requests to loopback addresses like localhost. (with a trailing dot) or [::1] (IPv6 literal) skip NO_PROXY matching and go through the configured proxy. This goes against what developers expect and lets attackers force requests through a proxy, even if NO_PROXY is set up to protect loopback or internal services. This issue leads to the possibility of proxy bypass and SSRF vulnerabilities allowing attackers to reach sensitive loopback or internal services despite the configured protections. This vulnerability is fixed in 1.15.0 and 0.31.0.
🎖@cveNotify
Axios is a promise based HTTP client for the browser and Node.js. Prior to 1.15.0 and 0.31.0, Axios does not correctly handle hostname normalization when checking NO_PROXY rules. Requests to loopback addresses like localhost. (with a trailing dot) or [::1] (IPv6 literal) skip NO_PROXY matching and go through the configured proxy. This goes against what developers expect and lets attackers force requests through a proxy, even if NO_PROXY is set up to protect loopback or internal services. This issue leads to the possibility of proxy bypass and SSRF vulnerabilities allowing attackers to reach sensitive loopback or internal services despite the configured protections. This vulnerability is fixed in 1.15.0 and 0.31.0.
🎖@cveNotify
IETF Datatracker
RFC 1034: Domain names - concepts and facilities
This RFC is the revised basic definition of The Domain Name System. It obsoletes RFC-882. This memo describes the domain style names and their used for host address look up and electronic mail forwarding. It discusses the clients and servers in the domain…
🚨 CVE-2026-34486
Missing Encryption of Sensitive Data vulnerability in Apache Tomcat due to the fix for CVE-2026-29146 allowing the bypass of the EncryptInterceptor.
This issue affects Apache Tomcat: 11.0.20, 10.1.53, 9.0.116.
Users are recommended to upgrade to version 11.0.21, 10.1.54 or 9.0.117, which fix the issue.
🎖@cveNotify
Missing Encryption of Sensitive Data vulnerability in Apache Tomcat due to the fix for CVE-2026-29146 allowing the bypass of the EncryptInterceptor.
This issue affects Apache Tomcat: 11.0.20, 10.1.53, 9.0.116.
Users are recommended to upgrade to version 11.0.21, 10.1.54 or 9.0.117, which fix the issue.
🎖@cveNotify
🚨 CVE-2026-43964
Postfix before 3.8.16, 3.9 before 3.9.10, and 3.10 before 3.10.9 sometimes allows a buffer over-read and process crash via an enhanced status code that lacks text after the third number.
🎖@cveNotify
Postfix before 3.8.16, 3.9 before 3.9.10, and 3.10 before 3.10.9 sometimes allows a buffer over-read and process crash via an enhanced status code that lacks text after the third number.
🎖@cveNotify
🚨 CVE-2026-33811
When using LookupCNAME with the cgo DNS resolver, a very long CNAME response can trigger a double-free of C memory and a crash.
🎖@cveNotify
When using LookupCNAME with the cgo DNS resolver, a very long CNAME response can trigger a double-free of C memory and a crash.
🎖@cveNotify
🚨 CVE-2026-43329
In the Linux kernel, the following vulnerability has been resolved:
netfilter: flowtable: strictly check for maximum number of actions
The maximum number of flowtable hardware offload actions in IPv6 is:
* ethernet mangling (4 payload actions, 2 for each ethernet address)
* SNAT (4 payload actions)
* DNAT (4 payload actions)
* Double VLAN (4 vlan actions, 2 for popping vlan, and 2 for pushing)
for QinQ.
* Redirect (1 action)
Which makes 17, while the maximum is 16. But act_ct supports for tunnels
actions too. Note that payload action operates at 32-bit word level, so
mangling an IPv6 address takes 4 payload actions.
Update flow_action_entry_next() calls to check for the maximum number of
supported actions.
While at it, rise the maximum number of actions per flow from 16 to 24
so this works fine with IPv6 setups.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
netfilter: flowtable: strictly check for maximum number of actions
The maximum number of flowtable hardware offload actions in IPv6 is:
* ethernet mangling (4 payload actions, 2 for each ethernet address)
* SNAT (4 payload actions)
* DNAT (4 payload actions)
* Double VLAN (4 vlan actions, 2 for popping vlan, and 2 for pushing)
for QinQ.
* Redirect (1 action)
Which makes 17, while the maximum is 16. But act_ct supports for tunnels
actions too. Note that payload action operates at 32-bit word level, so
mangling an IPv6 address takes 4 payload actions.
Update flow_action_entry_next() calls to check for the maximum number of
supported actions.
While at it, rise the maximum number of actions per flow from 16 to 24
so this works fine with IPv6 setups.
🎖@cveNotify
🚨 CVE-2026-42338
ip-address is a library for parsing and manipulating IPv4 and IPv6 addresses in JavaScript. Prior to 10.1.1, Address6.group() and Address6.link() do not HTML-escape attacker-controlled content before embedding it in the HTML strings they return, and AddressError.parseMessage (emitted by the Address6 constructor for invalid input) can contain unescaped attacker-controlled content in one branch. An application that (1) passes untrusted input to Address6 and (2) renders the output of these methods, or the thrown error's parseMessage, as HTML (e.g. via innerHTML) is vulnerable to cross-site scripting. This vulnerability is fixed in 10.1.1.
🎖@cveNotify
ip-address is a library for parsing and manipulating IPv4 and IPv6 addresses in JavaScript. Prior to 10.1.1, Address6.group() and Address6.link() do not HTML-escape attacker-controlled content before embedding it in the HTML strings they return, and AddressError.parseMessage (emitted by the Address6 constructor for invalid input) can contain unescaped attacker-controlled content in one branch. An application that (1) passes untrusted input to Address6 and (2) renders the output of these methods, or the thrown error's parseMessage, as HTML (e.g. via innerHTML) is vulnerable to cross-site scripting. This vulnerability is fixed in 10.1.1.
🎖@cveNotify
GitHub
XSS in Address6 HTML-emitting methods
### Summary
`Address6.group()` and `Address6.link()` do not HTML-escape attacker-controlled content before embedding it in the HTML strings they return, and `AddressError.parseMessage` (emitted ...
`Address6.group()` and `Address6.link()` do not HTML-escape attacker-controlled content before embedding it in the HTML strings they return, and `AddressError.parseMessage` (emitted ...
🚨 CVE-2026-44432
urllib3 is an HTTP client library for Python. From 2.6.0 to before 2.7.0, urllib3 could decompress the whole response instead of the requested portion (1) during the second HTTPResponse.read(amt=N) call when the response was decompressed using the official Brotli library or (2) when HTTPResponse.drain_conn() was called after the response had been read and decompressed partially (compression algorithm did not matter here). These issues could cause urllib3 to fully decode a small amount of highly compressed data in a single operation. This could result in excessive resource consumption (high CPU usage and massive memory allocation for the decompressed data) on the client side. This vulnerability is fixed in 2.7.0.
🎖@cveNotify
urllib3 is an HTTP client library for Python. From 2.6.0 to before 2.7.0, urllib3 could decompress the whole response instead of the requested portion (1) during the second HTTPResponse.read(amt=N) call when the response was decompressed using the official Brotli library or (2) when HTTPResponse.drain_conn() was called after the response had been read and decompressed partially (compression algorithm did not matter here). These issues could cause urllib3 to fully decode a small amount of highly compressed data in a single operation. This could result in excessive resource consumption (high CPU usage and massive memory allocation for the decompressed data) on the client side. This vulnerability is fixed in 2.7.0.
🎖@cveNotify
GitHub
Decompression-bomb safeguards bypassed in parts of the streaming API
### Impact
urllib3's [streaming API](https://urllib3.readthedocs.io/en/2.7.0/advanced-usage.html#streaming-and-i-o) is designed for the efficient handling of large HTTP responses by reading ...
urllib3's [streaming API](https://urllib3.readthedocs.io/en/2.7.0/advanced-usage.html#streaming-and-i-o) is designed for the efficient handling of large HTTP responses by reading ...
🚨 CVE-2026-42581
Netty is an asynchronous, event-driven network application framework. Prior to 4.2.13.Final and 4.1.133.Final, HttpObjectDecoder strips a conflicting Content-Length header when a request carries both Transfer-Encoding: chunked and Content-Length, but only for HTTP/1.1 messages. The guard is absent for HTTP/1.0. An attacker that sends an HTTP/1.0 request with both headers causes Netty to decode the body as chunked while leaving Content-Length intact in the forwarded HttpMessage. Any downstream proxy or handler that trusts Content-Length over Transfer-Encoding will disagree on message boundaries, enabling request smuggling. This vulnerability is fixed in 4.2.13.Final and 4.1.133.Final.
🎖@cveNotify
Netty is an asynchronous, event-driven network application framework. Prior to 4.2.13.Final and 4.1.133.Final, HttpObjectDecoder strips a conflicting Content-Length header when a request carries both Transfer-Encoding: chunked and Content-Length, but only for HTTP/1.1 messages. The guard is absent for HTTP/1.0. An attacker that sends an HTTP/1.0 request with both headers causes Netty to decode the body as chunked while leaving Content-Length intact in the forwarded HttpMessage. Any downstream proxy or handler that trusts Content-Length over Transfer-Encoding will disagree on message boundaries, enabling request smuggling. This vulnerability is fixed in 4.2.13.Final and 4.1.133.Final.
🎖@cveNotify
GitHub
HTTP/1.0 TE+CL Coexistence Bypasses Smuggling Sanitization
# NETTY HTTP/1.0 TE+CL Coexistence Bypasses Smuggling Sanitization
| Field | Value |
|-----------|-------|
| Library | `io.netty:netty-codec-http` |
| Component | `codec-http` — `HttpOb...
| Field | Value |
|-----------|-------|
| Library | `io.netty:netty-codec-http` |
| Component | `codec-http` — `HttpOb...
🚨 CVE-2026-42587
Netty is an asynchronous, event-driven network application framework. Prior to 4.2.13.Final and 4.1.133.Final, HttpContentDecompressor accepts a maxAllocation parameter to limit decompression buffer size and prevent decompression bomb attacks. This limit is correctly enforced for gzip and deflate encodings via ZlibDecoder, but is silently ignored when the content encoding is br (Brotli), zstd, or snappy. An attacker can bypass the configured decompression limit by sending a compressed payload with Content-Encoding: br instead of Content-Encoding: gzip, causing unbounded memory allocation and out-of-memory denial of service. The same vulnerability exists in DelegatingDecompressorFrameListener for HTTP/2 connections. This vulnerability is fixed in 4.2.13.Final and 4.1.133.Final.
🎖@cveNotify
Netty is an asynchronous, event-driven network application framework. Prior to 4.2.13.Final and 4.1.133.Final, HttpContentDecompressor accepts a maxAllocation parameter to limit decompression buffer size and prevent decompression bomb attacks. This limit is correctly enforced for gzip and deflate encodings via ZlibDecoder, but is silently ignored when the content encoding is br (Brotli), zstd, or snappy. An attacker can bypass the configured decompression limit by sending a compressed payload with Content-Encoding: br instead of Content-Encoding: gzip, causing unbounded memory allocation and out-of-memory denial of service. The same vulnerability exists in DelegatingDecompressorFrameListener for HTTP/2 connections. This vulnerability is fixed in 4.2.13.Final and 4.1.133.Final.
🎖@cveNotify
GitHub
HttpContentDecompressor maxAllocation bypass via Content-Encoding: br/zstd/snappy enables decompression bomb DoS
## Summary
`HttpContentDecompressor` accepts a `maxAllocation` parameter to limit decompression buffer size and prevent decompression bomb attacks. This limit is correctly enforced for gzip and ...
`HttpContentDecompressor` accepts a `maxAllocation` parameter to limit decompression buffer size and prevent decompression bomb attacks. This limit is correctly enforced for gzip and ...
🚨 CVE-2026-44673
libyang is a YANG data modeling language library. Prior to SO 5.2.15, lyb_read_string() in src/parser_lyb.c contains an integer overflow that results in a heap buffer overflow when parsing a maliciously crafted LYB binary blob. An attacker who can supply LYB data to any libyang consumer (NETCONF server, sysrepo, etc.) can trigger a crash or potential heap corruption. This vulnerability is fixed in SO 5.2.15.
🎖@cveNotify
libyang is a YANG data modeling language library. Prior to SO 5.2.15, lyb_read_string() in src/parser_lyb.c contains an integer overflow that results in a heap buffer overflow when parsing a maliciously crafted LYB binary blob. An attacker who can supply LYB data to any libyang consumer (NETCONF server, sysrepo, etc.) can trigger a crash or potential heap corruption. This vulnerability is fixed in SO 5.2.15.
🎖@cveNotify
GitHub
lyb_read_string() integer overflow → heap buffer overflow (CWE-190/CWE-122)
### Summary
`lyb_read_string()` in `src/parser_lyb.c` contains an integer overflow that results in a heap buffer overflow when parsing a maliciously crafted LYB binary
blob. An attacker who ...
`lyb_read_string()` in `src/parser_lyb.c` contains an integer overflow that results in a heap buffer overflow when parsing a maliciously crafted LYB binary
blob. An attacker who ...
🚨 CVE-2026-39828
When an SSH server authentication callback returned PartialSuccessError with non-nil Permissions, those permissions were silently discarded, potentially dropping certificate restrictions such as force-command after a second factor succeeded. Returning non-nil Permissions with PartialSuccessError now results in a connection error.
🎖@cveNotify
When an SSH server authentication callback returned PartialSuccessError with non-nil Permissions, those permissions were silently discarded, potentially dropping certificate restrictions such as force-command after a second factor succeeded. Returning non-nil Permissions with PartialSuccessError now results in a connection error.
🎖@cveNotify