🚨 CVE-2026-13192
In Progress® Telerik® UI for AJAX prior to v2026.2.708, insufficient validation of content submitted to the RadEditor PDF export feature may allow an authenticated attacker to trigger server-side requests to arbitrary hosts, resulting in outbound network connections and potential exposure of Windows authentication credentials.

🎖@cveNotify

🚨 CVE-2026-14865
In Progress® Telerik® UI for AJAX prior to v2026.2.708, the internal LayoutBuilder control processes client-state XML without disabling DTD processing, allowing unauthenticated denial of service via recursive XML entity expansion.

🎖@cveNotify

🚨 CVE-2026-48782
Pydantic AI is a Python agent framework for building applications and workflows with Generative AI. In versions 1.56.0 through 1.101.0, 2.0.0b1, and 2.0.0b2, the cloud-metadata blocklist could be bypassed by encoding the metadata IP in an IPv6 transition form that the previous fix, CVE-2026-46678, did not decode, exposing cloud IAM short-term credentials. The previous remediation decoded only IPv4-mapped IPv6, 6to4, and the NAT64 well-known prefix, so the metadata guarantee did not hold for the remaining transition forms: IPv4-compatible IPv6 (::a.b.c.d), the NAT64 RFC 8215 local-use prefix (64:ff9b:1::/48), operator-chosen NAT64 prefixes, and ISATAP. The IPv6 wrapper is then delivered to the underlying IPv4 metadata endpoint. This occurs when an application using Pydantic AI opts a URL into force_download='allow-local' (which disables the default block on private/internal IPs) and runs on a network that actually routes the affected IPv6 transition forms: NAT64-configured networks (IPv6-only or dual-stack-with-NAT64 deployments, including some Kubernetes setups) for the NAT64 variants, or networks with an ISATAP tunnel for ISATAP. A standard dual-stack cloud VM or container does not route these forms and is not affected in practice. The IPv4-compatible and Teredo variants are deprecated and addressed as defense-in-depth. This is an incomplete fix of GHSA-cqp8-fcvh-x7r3 / CVE-2026-46678 (itself a follow-up to CVE-2026-25580). This issue has been fixed in version 2.0.0b3.

🎖@cveNotify

🚨 CVE-2026-9726
Improperly Controlled Modification of Dynamically-Determined Object Attributes vulnerability in Drupal Drupal AlternativeCommerce (Basket) allows Object Injection. This issue affects Drupal AlternativeCommerce (Basket) versions: from 0.0.0 to 2.1.17.

🎖@cveNotify

🚨 CVE-2026-15427
An OS command
injection vulnerability exists in the TR-069 / CWMP management interface of Archer VX1800v v1 due to insufficient input validation and sanitization of
parameters, allowing crafted input to be executed as system-level commands.
Exploitation requires specific conditions such as TR-069 being enabled and ability
to influence ACS-delivered commands, compromise or control an ACS server.





Successful
exploitation may allow arbitrary command execution with root privileges,
resulting in complete compromise of the device.

🎖@cveNotify

🚨 CVE-2026-15428
An OS
command injection vulnerability exists in Archer VX800v v1 due to insufficient input sanitization of
the domain name parameter. An adjacent attacker who can access the relevant
HTTP interface can modify the parameter to inject shell metacharacters, resulting
in arbitrary code execution with root privileges.









Successful
exploitation may allow remote code execution and complete compromise of the
device.

🎖@cveNotify

🚨 CVE-2026-15429
A privilege escalation vulnerability exists in the HTTP authentication component in Archer VX1800v v1. Improper handling of user-controlled input may allow newline characters to be injected into internally constructed configuration data. 









An
authenticated user with sufficient privileges may be able to modify account
settings and gain elevated administrative privileges.

🎖@cveNotify

🚨 CVE-2026-5040
TP-Link Deco M5 v1 uses a weak password hashing mechanism to store user credentials. An attacker who obtains the password hash through system compromise or privileged access could perform brute-force or dictionary attacks.

Successful exploitation may result in disclosure of authentication credentials, enabling unauthorized access to device management functions, depending on the privileges associated with the recovered password. The primary security impact is loss of confidentiality.

🎖@cveNotify

🚨 CVE-2026-47429
Vitest is a testing framework powered by Vite. Prior to 3.2.5 and 4.1.0, the Vitest UI/API server on Windows used isFileServingAllowed incorrectly for /__vitest_attachment__, allowing \\?\\..\\ path traversal to read files outside the project; exposed API write and rerun features such as saveTestFile and rerun could also allow arbitrary script execution. This issue is fixed in versions 3.2.5 and 4.1.0.

🎖@cveNotify

🚨 CVE-2026-48125
UAParser.js is a JavaScript library to detect browsers, operating systems, CPUs, and devices from user-agent data. From 2.0.1 until 2.0.10, a regular expression denial-of-service vulnerability exists when using the Client Hints API. By sending a crafted Sec-CH-UA-Model header to an application that calls UAParser(headers).withClientHints(), an attacker can cause excessive CPU time due to catastrophic backtracking in the device regex because Client Hints values are copied without the UA_MAX_LENGTH limit used for User-Agent values. This issue is fixed in version 2.0.10.

🎖@cveNotify

🚨 CVE-2026-48801
linkify-it is a links recognition library with full Unicode support. Prior to 5.0.1, LinkifyIt.prototype.match, the package's primary public API, has O(N²) algorithmic complexity for inputs containing many fuzzy links or emails because the JavaScript-level scan loop re-slices input and re-runs unanchored regex searches on progressively shorter tails. Any service that synchronously renders untrusted Markdown with linkify:true on a request hot path can inherit a worker-process denial of service triggerable by a tens-of-KB request body. This issue is fixed in version 5.0.1.

🎖@cveNotify

🚨 CVE-2026-13230
An information disclosure vulnerability was identified in TP-Link Kasa EC70 v4 and EC71 v4 in the local discovery mechanism, which exposes
sensitive geolocation information without requiring authentication. This issue
allows an attacker on the same local network to retrieve geolocation-related
data through crafted responses.

The
vulnerability impacts confidentiality only, with no evidence of integrity of
availability impact.

🎖@cveNotify

🚨 CVE-2026-9770
Kasa EC71 v4 and EC70 v4 firmware contains a static cryptographic private key stored in a read-only filesystem
that is shared across devices.  An
attacker with access to the firmware image can extract the embedded key. 









Successful
exploitation may allow an unauthenticated attacker on the same network to use
this key in the web management service, compromising the confidentiality of
encrypted communications. This may enable passive decryption of traffic or
active man-in-the-middle (MITM) attacks

🎖@cveNotify

🚨 CVE-2026-59762
When an HTTP/2 profile is configured on a virtual server, undisclosed requests can cause an increase in memory resource utilization.  









Impact:
System performance can degrade until the TMM process is either forced to restart or is manually restarted. This vulnerability allows a remote, unauthenticated attacker to cause a degradation of service that can lead to a denial-of-service (DoS) on the BIG-IP system. There is no control plane exposure; this is a data plane issue only.





Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

🎖@cveNotify

🚨 CVE-2026-60062
The NGINX Agent config_dirs directive allows a low-privileged attacker to gain limited read and write access to files outside of the designated secure directory. The config_dirs directive required for this issue can also be configured through NGINX Instance Manager. A successful exploit may allow an attacker to cross a security boundary.

Impact:
A remotely authenticated low-privileged attacker could gain limited read and write access outside of the list of directories specified in the NGINX Agent configuration.



Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

🎖@cveNotify

🚨 CVE-2026-60005
NGINX Plus and NGINX Open Source have a vulnerability in the ngx_http_slice_module module. When the slice directive and unnamed regex captures are configured or when a background cache update happens, unauthenticated attackers can send requests that may cause uninitialized memory access in the NGINX worker process, leading to limited disclosure of memory or a restart.

Impact:
This vulnerability may allow remote, unauthenticated attackers to have limited control to disclose memory contents or restart the NGINX worker process. There is no control plane exposure; this is a data plane issue only.
Note: The ngx_http_slice_module module is not enabled by default; it's enabled with the --with-http_slice_module configuration parameter.

Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

🎖@cveNotify

🚨 CVE-2026-59173
Uncontrolled Resource Consumption vulnerability in Apache Traffic Server.

This issue affects Apache Traffic Server: from 9.0.0 through 9.1.13, from 10.0.0 through 10.1.2.

Users are recommended to upgrade to version 9.1.14 or 10.1.3, which fixes the issue.

🎖@cveNotify

🚨 CVE-2026-60179
Vulnerability in the MySQL Connectors product of Oracle MySQL (component: Connector/C++). Supported versions that are affected are 9.7.0-9.7.1. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise MySQL Connectors. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all MySQL Connectors accessible data as well as unauthorized access to critical data or complete access to all MySQL Connectors accessible data. CVSS 3.1 Base Score 7.4 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:N).

🎖@cveNotify

🚨 CVE-2026-60180
Vulnerability in the MySQL Connectors product of Oracle MySQL (component: Connector/C++). Supported versions that are affected are 9.7.0-9.7.1. Easily exploitable vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise MySQL Connectors. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of MySQL Connectors. CVSS 3.1 Base Score 7.5 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H).

🎖@cveNotify

🚨 CVE-2026-18089
Net::SAML2 versions before 0.86 for Perl allow SAML authentication bypass by verifying responses against the response-embedded certificate in verify_xml when no trust anchor is configured.

verify_xml in Net::SAML2::Role::VerifyXML runs "return if !$anchors && !$cacert;" as soon as the XML::Sig check succeeds, and that check uses the X.509 certificate taken from the response's own dsig:KeyInfo/dsig:X509Certificate element, so an unanchored response is checked only against the key it carries. Binding::POST declares cacert as an optional Maybe[Str] with no default, so a POST binding built without one takes that path, and _verify_encrypted_assertion returns early the same way with "return $xml unless $cacert;".

Any caller that constructs Binding::POST or calls Assertion->new_from_xml without a cacert, cert_text, or anchors argument accepts a response signed by an attacker generated key whose self-signed certificate is embedded in that response, authenticating an arbitrary assertion.

🎖@cveNotify

🚨 CVE-2026-18092
Net::SAML2 versions before 0.86 for Perl allow SAML authentication bypass via XML signature wrapping because new_from_xml reads assertion identity with document-wide XPath instead of the signed subtree.

new_from_xml reads the NameID, attribute values, SessionIndex, audience and other identity fields with document-wide XPath, such as //saml:Assertion/saml:AttributeStatement/saml:Attribute and //saml:Subject/saml:NameID, which select the first matching element in document order rather than the element covered by the verified signature. handle_response confirms that a signature is present and, when a cacert is configured, that it chains to the CA, but XML::Sig verifies only the element named by the signature's Reference URI, so unsigned sibling assertions in the same document are not covered. An attacker who holds any one IdP-signed assertion can add an unsigned attacker-authored assertion earlier in document order; the signature still verifies and the document-order XPath returns the attacker's NameID and attributes.

Any caller that passes an untrusted Response to new_from_xml can accept identity fields from an assertion the IdP never signed, even when a cacert trust anchor is configured, so a party holding one valid IdP-signed assertion can authenticate as an arbitrary user.

🎖@cveNotify