🚨 CVE-2026-25679
url.Parse insufficiently validated the host/authority component and accepted some invalid URLs.

🎖@cveNotify

🚨 CVE-2026-27137
When verifying a certificate chain which contains a certificate containing multiple email address constraints which share common local portions but different domain portions, these constraints will not be properly applied, and only the last constraint will be considered.

🎖@cveNotify

🚨 CVE-2026-31812
Quinn is a pure-Rust, async-compatible implementation of the IETF QUIC transport protocol. Prior to 0.11.14, a remote, unauthenticated attacker can trigger a denial of service in applications using vulnerable quinn versions by sending a crafted QUIC Initial packet containing malformed quic_transport_parameters. In quinn-proto parsing logic, attacker-controlled varints are decoded with unwrap(), so truncated encodings cause Err(UnexpectedEnd) and panic. This is reachable over the network with a single packet and no prior trust or authentication. This vulnerability is fixed in 0.11.14.

🎖@cveNotify

🚨 CVE-2026-33186
gRPC-Go is the Go language implementation of gRPC. Versions prior to 1.79.3 have an authorization bypass resulting from improper input validation of the HTTP/2 `:path` pseudo-header. The gRPC-Go server was too lenient in its routing logic, accepting requests where the `:path` omitted the mandatory leading slash (e.g., `Service/Method` instead of `/Service/Method`). While the server successfully routed these requests to the correct handler, authorization interceptors (including the official `grpc/authz` package) evaluated the raw, non-canonical path string. Consequently, "deny" rules defined using canonical paths (starting with `/`) failed to match the incoming request, allowing it to bypass the policy if a fallback "allow" rule was present. This affects gRPC-Go servers that use path-based authorization interceptors, such as the official RBAC implementation in `google.golang.org/grpc/authz` or custom interceptors relying on `info.FullMethod` or `grpc.Method(ctx)`; AND that have a security policy contains specific "deny" rules for canonical paths but allows other requests by default (a fallback "allow" rule). The vulnerability is exploitable by an attacker who can send raw HTTP/2 frames with malformed `:path` headers directly to the gRPC server. The fix in version 1.79.3 ensures that any request with a `:path` that does not start with a leading slash is immediately rejected with a `codes.Unimplemented` error, preventing it from reaching authorization interceptors or handlers with a non-canonical path string. While upgrading is the most secure and recommended path, users can mitigate the vulnerability using one of the following methods: Use a validating interceptor (recommended mitigation); infrastructure-level normalization; and/or policy hardening.

🎖@cveNotify

🚨 CVE-2026-4800
Impact:

The fix for CVE-2021-23337 (https://github.com/advisories/GHSA-35jh-r3h4-6jhm) added validation for the variable option in _.template but did not apply the same validation to options.imports key names. Both paths flow into the same Function() constructor sink.

When an application passes untrusted input as options.imports key names, an attacker can inject default-parameter expressions that execute arbitrary code at template compilation time.

Additionally, _.template uses assignInWith to merge imports, which enumerates inherited properties via for..in. If Object.prototype has been polluted by any other vector, the polluted keys are copied into the imports object and passed to Function().

Patches:

Users should upgrade to version 4.18.0.

Workarounds:

Do not pass untrusted input as key names in options.imports. Only use developer-controlled, static key names.

🎖@cveNotify

🚨 CVE-2026-34986
Go JOSE provides an implementation of the Javascript Object Signing and Encryption set of standards in Go, including support for JSON Web Encryption (JWE), JSON Web Signature (JWS), and JSON Web Token (JWT) standards. Prior to 4.1.4 and 3.0.5, decrypting a JSON Web Encryption (JWE) object will panic if the alg field indicates a key wrapping algorithm (one ending in KW, with the exception of A128GCMKW, A192GCMKW, and A256GCMKW) and the encrypted_key field is empty. The panic happens when cipher.KeyUnwrap() in key_wrap.go attempts to allocate a slice with a zero or negative length based on the length of the encrypted_key. This code path is reachable from ParseEncrypted() / ParseEncryptedJSON() / ParseEncryptedCompact() followed by Decrypt() on the resulting object. Note that the parse functions take a list of accepted key algorithms. If the accepted key algorithms do not include any key wrapping algorithms, parsing will fail and the application will be unaffected. This panic is also reachable by calling cipher.KeyUnwrap() directly with any ciphertext parameter less than 16 bytes long, but calling this function directly is less common. Panics can lead to denial of service. This vulnerability is fixed in 4.1.4 and 3.0.5.

🎖@cveNotify

🚨 CVE-2026-32280
During chain building, the amount of work that is done is not correctly limited when a large number of intermediate certificates are passed in VerifyOptions.Intermediates, which can lead to a denial of service. This affects both direct users of crypto/x509 and users of crypto/tls.

🎖@cveNotify

🚨 CVE-2026-33810
When verifying a certificate chain containing excluded DNS constraints, these constraints are not correctly applied to wildcard DNS SANs which use a different case than the constraint. This only affects validation of otherwise trusted certificate chains, issued by a root CA in the VerifyOptions.Roots CertPool, or in the system certificate pool.

🎖@cveNotify

🚨 CVE-2026-40175
Axios is a promise based HTTP client for the browser and Node.js. Versions prior to 1.15.0 and 0.3.1 are vulnerable to a specific gadget-style attack chain in which prototype pollution in a third-party dependency may be leveraged to inject unsanitized header values into outbound requests. This vulnerability is fixed in 1.15.0 and 0.3.1.

🎖@cveNotify

🚨 CVE-2026-35469
spdystream is a Go library for multiplexing streams over SPDY connections. In versions 0.5.0 and below, the SPDY/3 frame parser does not validate attacker-controlled counts and lengths before allocating memory. Three allocation paths are affected: the SETTINGS frame entry count, the header count in parseHeaderValueBlock, and individual header field sizes — all read as 32-bit integers and used directly as allocation sizes with no bounds checking. Because SPDY header blocks are zlib-compressed, a small on-the-wire payload can decompress into large attacker-controlled values. A remote peer that can send SPDY frames to a service using spdystream can exhaust process memory and cause an out-of-memory crash with a single crafted control frame. This issue has been fixed in version 0.5.1.

🎖@cveNotify

🚨 CVE-2026-40895
follow-redirects is an open source, drop-in replacement for Node's `http` and `https` modules that automatically follows redirects. Prior to 1.16.0, when an HTTP request follows a cross-domain redirect (301/302/307/308), follow-redirects only strips authorization, proxy-authorization, and cookie headers (matched by regex at index.js). Any custom authentication header (e.g., X-API-Key, X-Auth-Token, Api-Key, Token) is forwarded verbatim to the redirect target. This vulnerability is fixed in 1.16.0.

🎖@cveNotify

🚨 CVE-2026-31617
In the Linux kernel, the following vulnerability has been resolved:

usb: gadget: f_ncm: validate minimum block_len in ncm_unwrap_ntb()

The block_len read from the host-supplied NTB header is checked against
ntb_max but has no lower bound. When block_len is smaller than
opts->ndp_size, the bounds check of:
ndp_index > (block_len - opts->ndp_size)
will underflow producing a huge unsigned value that ndp_index can never
exceed, defeating the check entirely.

The same underflow occurs in the datagram index checks against block_len
- opts->dpe_size. With those checks neutered, a malicious USB host can
choose ndp_index and datagram offsets that point past the actual
transfer, and the skb_put_data() copies adjacent kernel memory into the
network skb.

Fix this by rejecting block lengths that cannot hold at least the NTB
header plus one NDP. This will make block_len - opts->ndp_size and
block_len - opts->dpe_size both well-defined.

Commit 8d2b1a1ec9f5 ("CDC-NCM: avoid overflow in sanity checking") fixed
a related class of issues on the host side of NCM.

🎖@cveNotify

🚨 CVE-2026-31663
In the Linux kernel, the following vulnerability has been resolved:

xfrm: hold dev ref until after transport_finish NF_HOOK

After async crypto completes, xfrm_input_resume() calls dev_put()
immediately on re-entry before the skb reaches transport_finish.
The skb->dev pointer is then used inside NF_HOOK and its okfn,
which can race with device teardown.

Remove the dev_put from the async resumption entry and instead
drop the reference after the NF_HOOK call in transport_finish,
using a saved device pointer since NF_HOOK may consume the skb.
This covers NF_DROP, NF_QUEUE and NF_STOLEN paths that skip
the okfn.

For non-transport exits (decaps, gro, drop) and secondary
async return points, release the reference inline when
async is set.

🎖@cveNotify

🚨 CVE-2025-48431
Mismatched Memory Management Routines vulnerability in Apache Thrift c_glib language bindings.

This issue affects Apache Thrift: before 0.23.0.

Users are recommended to upgrade to version 0.23.0, which fixes the issue.

Description: Specially crafted requests can crash an c_glib-based Thrift server with a clean but fatal "free(): invalid pointer" error message.

🎖@cveNotify

🚨 CVE-2026-42151
Prometheus is an open-source monitoring system and time series database. Prior to versions 3.5.3 and 3.11.3, the client_secret field in the Azure AD remote write OAuth configuration (storage/remote/azuread) was typed as string instead of Secret. Prometheus redacts fields of type Secret when serving the configuration via the /-/config HTTP API endpoint. Because the field was a plain string, the Azure OAuth client secret was exposed in plaintext to any user or process with access to that endpoint. This issue has been patched in versions 3.5.3 and 3.11.3.

🎖@cveNotify

🚨 CVE-2026-42154
Prometheus is an open-source monitoring system and time series database. Prior to versions 3.5.3 and 3.11.3, the remote read endpoint (/api/v1/read) does not validate the declared decoded length in a snappy-compressed request body before allocating memory. An unauthenticated attacker can send a small payload that causes a huge heap allocation per request. Under concurrent load this can exhaust available memory and crash the Prometheus process. This issue has been patched in versions 3.5.3 and 3.11.3.

🎖@cveNotify

🚨 CVE-2026-43964
Postfix before 3.8.16, 3.9 before 3.9.10, and 3.10 before 3.10.9 sometimes allows a buffer over-read and process crash via an enhanced status code that lacks text after the third number.

🎖@cveNotify

🚨 CVE-2026-43869
Improper Validation of Certificate with Host Mismatch vulnerability in Apache Thrift.

This issue affects Apache Thrift: before 0.23.0.

Users are recommended to upgrade to version 0.23.0, which fixes the issue.

🎖@cveNotify

🚨 CVE-2026-39820
Well-crafted inputs reaching ParseAddress, ParseAddressList, and ParseDate were able to trigger excessive CPU exhaustion and memory allocations.

🎖@cveNotify

🚨 CVE-2026-42499
Pathological inputs could cause DoS through consumePhrase when parsing an email address according to RFC 5322.

🎖@cveNotify

🚨 CVE-2026-43329
In the Linux kernel, the following vulnerability has been resolved:

netfilter: flowtable: strictly check for maximum number of actions

The maximum number of flowtable hardware offload actions in IPv6 is:

* ethernet mangling (4 payload actions, 2 for each ethernet address)
* SNAT (4 payload actions)
* DNAT (4 payload actions)
* Double VLAN (4 vlan actions, 2 for popping vlan, and 2 for pushing)
for QinQ.
* Redirect (1 action)

Which makes 17, while the maximum is 16. But act_ct supports for tunnels
actions too. Note that payload action operates at 32-bit word level, so
mangling an IPv6 address takes 4 payload actions.

Update flow_action_entry_next() calls to check for the maximum number of
supported actions.

While at it, rise the maximum number of actions per flow from 16 to 24
so this works fine with IPv6 setups.

🎖@cveNotify