🚨 CVE-2026-64589
In the Linux kernel, the following vulnerability has been resolved:

i2c: core: fix NULL-deref on adapter registration failure

If adapter registration ever fails the release callback would trigger a
NULL-pointer dereference as the completion struct has not been
initialised.

Note that before the offending commit this would instead have resulted
in a minor memory leak of the adapter name.

🎖@cveNotify

🚨 CVE-2026-64590
In the Linux kernel, the following vulnerability has been resolved:

dma-buf/udmabuf: skip redundant cpu sync to fix cacheline EEXIST warning

When CONFIG_DMA_API_DEBUG_SG is enabled, importing a udmabuf into a DRM
driver (e.g. amdgpu for video playback in GNOME Videos / Showtime)
triggers a spurious warning:

DMA-API: amdgpu 0000:03:00.0: cacheline tracking EEXIST, \
overlapping mappings aren't supported
WARNING: kernel/dma/debug.c:619 at add_dma_entry+0x473/0x5f0

The call chain is:

amdgpu_cs_ioctl
-> amdgpu_ttm_backend_bind
-> dma_buf_map_attachment
-> [udmabuf] map_udmabuf -> get_sg_table
-> dma_map_sgtable(dev, sg, direction, 0) // attrs=0
-> debug_dma_map_sg -> add_dma_entry -> EEXIST

This happens because udmabuf builds a per-page scatter-gather list via
sg_set_folio(). When begin_cpu_udmabuf() has already created an sg
table mapped for the misc device, and an importer such as amdgpu maps
the same pages for its own device via map_udmabuf(), the DMA debug
infrastructure sees two active mappings whose physical addresses share
cacheline boundaries and warns about the overlap.

The DMA_ATTR_SKIP_CPU_SYNC flag suppresses this check in
add_dma_entry() because it signals that no CPU cache maintenance is
performed at map/unmap time, making the cacheline overlap harmless.

All other major dma-buf exporters already pass this flag:
- drm_gem_map_dma_buf() passes DMA_ATTR_SKIP_CPU_SYNC
- amdgpu_dma_buf_map() passes DMA_ATTR_SKIP_CPU_SYNC

The CPU sync at map/unmap time is also redundant for udmabuf:
begin_cpu_udmabuf() and end_cpu_udmabuf() already perform explicit
cache synchronization via dma_sync_sgtable_for_cpu/device() when CPU
access is requested through the dma-buf interface.

Pass DMA_ATTR_SKIP_CPU_SYNC to dma_map_sgtable() and
dma_unmap_sgtable() in udmabuf to suppress the spurious warning and
skip the redundant sync.

🎖@cveNotify

🚨 CVE-2026-64591
In the Linux kernel, the following vulnerability has been resolved:

iommu/vt-d: Avoid WARNING in sva unbind path

The Intel IOMMU driver allows SVA on devices even if they do not support
PCI/PRI. Commit 39c20c4e83b9 ("iommu/vt-d: Only handle IOPF for SVA when
PRI is supported") modified the SVA bind path to allow this configuration
by skipping IOPF enablement when PRI is missing. However, it failed to
update the unbind path.

This creates an imbalance: the unbind path attempts to disable IOPF for
a device that never had it enabled, triggering a WARNING in
intel_iommu_disable_iopf():

WARNING: drivers/iommu/intel/iommu.c:3475 at intel_iommu_disable_iopf+0x4f/0x90d
Call Trace:
<TASK>
blocking_domain_set_dev_pasid+0x50/0x70
iommu_detach_device_pasid+0x89/0xc0
iommu_sva_unbind_device+0x73/0x150
xe_vm_close_and_put+0x4d2/0x1200 [xe]

Fix this by bypassing IOPF operations for SVA domains on non-PRI hardware
in both the bind and unbind paths.

🎖@cveNotify

🚨 CVE-2026-64592
In the Linux kernel, the following vulnerability has been resolved:

riscv: mm: Unconditionally sfence.vma for spurious fault

Svvptc does not guarantee that it's safe to just return here. Since we
have already cleared our bit, if, theoretically, the bounded timeframe
for the accessed page to become valid still hasn't happened after sret,
we could fault again and actually crash.

Hopefully, these spurious faults should be rare enough that this is an
acceptable slowdown.

🎖@cveNotify

🚨 CVE-2026-64593
In the Linux kernel, the following vulnerability has been resolved:

btrfs: do not trim a device which is not writeable

[BUG]
There is a bug report that btrfs/242 can randomly fail with the
following NULL pointer dereference:

run fstests btrfs/242 at 2026-06-01 10:25:08
BTRFS: device fsid d4d7f234-487c-4787-88e4-47a8b68c9874 devid 1 transid 9 /dev/sdc (8:32) scanned by mount (122609)
BTRFS info (device sdc): first mount of filesystem d4d7f234-487c-4787-88e4-47a8b68c9874
BTRFS info (device sdc): using crc32c checksum algorithm
BTRFS warning (device sdc): devid 2 uuid fbe72d72-3272-482d-80fb-ab88ed398192 is missing
BTRFS warning (device sdc): devid 2 uuid fbe72d72-3272-482d-80fb-ab88ed398192 is missing
BTRFS info (device sdc): allowing degraded mounts
BTRFS info (device sdc): turning on async discard
BTRFS info (device sdc): enabling free space tree
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018
user pgtable: 4k pages, 48-bit VAs, pgdp=000000013fd6b000
CPU: 4 UID: 0 PID: 122625 Comm: fstrim Not tainted 7.0.10-2-default #1 PREEMPT(full) openSUSE Tumbleweed e9a5f6b24978fba3bf015a992f865837fdfff3dd
Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20250812-19.fc42 08/12/2025
pstate: 01400005 (nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
pc : btrfs_trim_fs+0x34c/0xa00 [btrfs]
lr : btrfs_trim_fs+0x1f0/0xa00 [btrfs]
Call trace:
btrfs_trim_fs+0x34c/0xa00 [btrfs f02c1d570ceea621c69d302ba75dd61868083840] (P)
btrfs_ioctl_fitrim+0xe8/0x178 [btrfs f02c1d570ceea621c69d302ba75dd61868083840]
btrfs_ioctl+0xdd4/0x2bd8 [btrfs f02c1d570ceea621c69d302ba75dd61868083840]
__arm64_sys_ioctl+0xac/0x108
invoke_syscall.constprop.0+0x5c/0xd0
el0_svc_common.constprop.0+0x40/0xf0
do_el0_svc+0x24/0x40
el0_svc+0x40/0x1d0
el0t_64_sync_handler+0xa0/0xe8
el0t_64_sync+0x1b0/0x1b8
Code: 17ffff83 f94017e0 f9002be0 f9402ea0 (f9400c00)
---[ end trace 0000000000000000 ]---

Also the reporter is very kind to test the following ASSERT() added to
btrfs_trim_free_extents_throttle():

ASSERT(device->bdev,
"devid=%llu path=%s dev_state=0x%lx\n",
device->devid, btrfs_dev_name(device), device->dev_state);

And it shows the following output:

assertion failed: device->bdev, in extent-tree.c:6630 (devid=2 path=/dev/sdd dev_state=0x82)

Which means the device->bdev is NULL, and the dev_state is
BTRFS_DEV_STATE_IN_FS_METADATA | BTRFS_DEV_STATE_ITEM_FOUND, without
BTRFS_DEV_STATE_WRITEABLE flag set.

[CAUSE]
The pc points to the following call chain:

btrfs_trim_fs()
|- btrfs_trim_free_extents()
|- btrfs_trim_free_extents_throttle()
|- bdev_max_discard_sectors(device->bdev)

So the NULL pointer dereference is caused by device->bdev being NULL.

This looks impossible by a quick glance, as just before calling
btrfs_trim_free_extents_throttle(), we have skipped any device that has
BTRFS_DEV_STATE_MISSING flag set.

However in this particular case, there is a window where the missing
device is later re-scanned, causing btrfs to remove the
BTRFS_DEV_STATE_MISSING flag:

btrfs_control_ioctl()
|- btrfs_scan_one_device()
|- device_list_add()
|- rcu_assign_pointer(device->name, name);
| This updates the missing device's path to the new good path.
|
|- clear_bit(BTRFS_DEV_STATE_MISSING, &device->dev_state)
This removes the BTRFS_DEV_STATE_MISSING flag.

This allows the missing device to re-appear and clear the
BTRFS_DEV_STATE_MISSING flag. However the device still does not have
the BTRFS_DEV_STATE_WRITEABLE flag set, nor is its bdev pointer updated.

The bdev pointer remains NULL, triggering the crash later.

[FIX]
This is a big de-synchronization between BTRFS_DEV_STATE_MISSING and
device->bdev pointer, and shows a gap in btrfs's re-appearing-device
handling.

The proper handling of re-appearing device will need quite some extra
work, which is out of the context of this small
---truncated---

🎖@cveNotify

🚨 CVE-2026-64594
In the Linux kernel, the following vulnerability has been resolved:

usb: gadget: f_fs: initialize reset_work at allocation time

ffs_fs_kill_sb() unconditionally calls cancel_work_sync() on
ffs->reset_work when a functionfs instance is unmounted:

ffs_data_reset(ffs);
cancel_work_sync(&ffs->reset_work);

However ffs->reset_work is only ever initialized via INIT_WORK() in
ffs_func_set_alt() and ffs_func_disable(), and only on the
FFS_DEACTIVATED path. That state is reached solely by ffs_data_closed()
when the instance is mounted with the "no_disconnect" option, so for the
common case (no "no_disconnect", or mounted and unmounted without ever
being deactivated) reset_work is never initialized.

ffs_data_new() allocates the ffs_data with kzalloc_obj() and does not
initialize reset_work, and ffs_data_reset()/ffs_data_clear() do not touch
it either, so reset_work.func is left NULL. cancel_work_sync() on such a
work then trips the WARN_ON(!work->func) guard in __flush_work():

WARNING: kernel/workqueue.c:4301 at __flush_work+0x330/0x360, CPU#3: umount
Call trace:
__flush_work
cancel_work_sync
ffs_fs_kill_sb [usb_f_fs]
deactivate_locked_super
deactivate_super
cleanup_mnt
__cleanup_mnt
task_work_run
exit_to_user_mode_loop
el0_svc

On older kernels cancel_work_sync() on a zero-initialized work struct was
a silent no-op, which hid the missing initialization.

Initialize reset_work once in ffs_data_new() so it is always valid for
the lifetime of the ffs_data, and drop the now-redundant INIT_WORK()
calls from the two deactivation paths.

🎖@cveNotify

🚨 CVE-2026-64595
In the Linux kernel, the following vulnerability has been resolved:

HID: hid-lenovo-go: cancel cfg_setup work in hid_go_cfg_remove()

hid_go_cfg_probe() initialises drvdata.go_cfg_setup and schedules it
to run 2 ms later:

INIT_DELAYED_WORK(&drvdata.go_cfg_setup, &cfg_setup);
schedule_delayed_work(&drvdata.go_cfg_setup, msecs_to_jiffies(2));

cfg_setup() dereferences drvdata.hdev to issue MCU command requests.
hid_go_cfg_remove() tears down sysfs and stops the HID device, but
never drains the delayed work. If the device is unbound within the
2 ms scheduling delay (a probe failure rolling back via remove, or a
fast rmmod after probe), the work fires after hid_destroy_device()
has dropped its reference and released the underlying hdev struct,
leaving cfg_setup() with a stale drvdata.hdev pointer.

Mirror the sibling driver hid-lenovo-go-s.c, whose hid_gos_cfg_remove()
already calls cancel_delayed_work_sync() on its analogous work, and
drain go_cfg_setup at the top of hid_go_cfg_remove(). The cancel
must come before guard(mutex)(&drvdata.cfg_mutex) because cfg_setup()
acquires that mutex; reversing the order would deadlock.

🎖@cveNotify

🚨 CVE-2026-64596
In the Linux kernel, the following vulnerability has been resolved:

libfs: set SB_I_NOEXEC and SB_I_NODEV by default in init_pseudo()

Since commit 1e7ab6f67824 ("anon_inode: rework assertions"),
path_noexec() warns when an anonymous-inode file is mmap'd from a
superblock that has not set SB_I_NOEXEC. dma-buf backs its files this
way and never set the flag, so mmap of any exported buffer trips the
warning on a CONFIG_DEBUG_VFS=y kernel:

WARNING: CPU: 11 PID: 121813 at fs/exec.c:118 path_noexec+0x47/0x50
do_mmap+0x2b5/0x680
vm_mmap_pgoff+0x129/0x210
ksys_mmap_pgoff+0x177/0x240
__x64_sys_mmap+0x33/0x70

init_pseudo() sets up internal SB_NOUSER mounts that are never
path-reachable. Set both flags here so every pseudo filesystem gets
them by default instead of each caller setting them.

SB_I_NODEV is inert for unreachable mounts. SB_I_NOEXEC has one
visible effect: an executable mapping of a pseudo-fs fd, such as a
dma-buf, now fails with -EPERM, which is the invariant the assertion
enforces. No in-tree caller maps these executable.

Reproduce on CONFIG_DEBUG_VFS=y:

make -C tools/testing/selftests/dmabuf-heaps
sudo ./tools/testing/selftests/dmabuf-heaps/dmabuf-heap -t system

🎖@cveNotify

🚨 CVE-2026-64597
In the Linux kernel, the following vulnerability has been resolved:

smb: client: fix double-free in SMB2_close() replay

A response-bearing attempt can return a replayable error and free its
response buffer. If SMB2_close_init() fails before the next send, cleanup
retains the previous buffer type and frees that response again.

Reset response bookkeeping before each attempt to prevent the stale free.

🎖@cveNotify

🚨 CVE-2026-64599
In the Linux kernel, the following vulnerability has been resolved:

crypto: amlogic - avoid double cleanup in meson_crypto_probe()

When meson_allocate_chanlist() fails after a partial allocation, it already
unwinds the allocated chanlist state through its local error path.
meson_crypto_probe() then jump to error_flow and calls
meson_free_chanlist() again, causing the same per-flow resources to be torn
down twice. In the reproduced failure path, the second teardown
re-entered crypto_engine_exit() on an already destroyed worker and KASAN
reported a slab-use-after-free in kthread_destroy_worker().

Prevent double-free by handling partial allocation failures locally within
meson_allocate_chanlist() and skipping the outer cleanup path.

The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available.

The bug was reproduced in a QEMU x86_64 guest booted with KASAN on v7.1,
using the reproducer under tools/testing/meson_crypto_probe. The reproducer
forces the second dma_alloc_attrs() call in the gxl-crypto probe path to
return NULL, making meson_allocate_chanlist() fail after partial
initialization. On the unpatched kernel this reliably triggered a
slab-use-after-free. With this fix applied, the same reproducer no longer
emits any KASAN report and the probe fails cleanly with -ENOMEM.

==================================================================
BUG: KASAN: slab-use-after-free in kthread_destroy_worker+0xb2/0xd0
Read of size 8 at addr ff1100010c057a68 by task insmod/265

CPU: 1 UID: 0 PID: 265 Comm: insmod Tainted: G O 7.1.0-rc2-00376-g810af9adc907-dirty #10 PREEMPT(lazy)
Tainted: [O]=OOT_MODULE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x68/0xa0
print_report+0xcb/0x5e0
? __virt_addr_valid+0x21d/0x3f0
? kthread_destroy_worker+0xb2/0xd0
? kthread_destroy_worker+0xb2/0xd0
kasan_report+0xca/0x100
? kthread_destroy_worker+0xb2/0xd0
kthread_destroy_worker+0xb2/0xd0
meson_crypto_probe+0x4d0/0xc10 [amlogic_gxl_crypto]
platform_probe+0x99/0x140
really_probe+0x1c6/0x6a0
? __pfx___device_attach_driver+0x10/0x10
__driver_probe_device+0x248/0x310
? acpi_driver_match_device+0xb0/0x100
driver_probe_device+0x48/0x210
? __pfx___device_attach_driver+0x10/0x10
__device_attach_driver+0x160/0x320
bus_for_each_drv+0x104/0x190
? __pfx_bus_for_each_drv+0x10/0x10
? _raw_spin_unlock_irqrestore+0x2c/0x50
__device_attach+0x19d/0x3b0
? __pfx___device_attach+0x10/0x10
? do_raw_spin_unlock+0x53/0x220
device_initial_probe+0x78/0xa0
bus_probe_device+0x5b/0x130
device_add+0xcfd/0x1430
? __pfx_device_add+0x10/0x10
? insert_resource+0x34/0x50
? lock_release+0xc9/0x290
platform_device_add+0x24e/0x590
? __pfx_meson_crypto_probe_repro_init+0x10/0x10 [meson_crypto_probe_repro]
meson_crypto_probe_repro_init+0x330/0xff0 [meson_crypto_probe_repro]
do_one_initcall+0xc0/0x450
? __pfx_do_one_initcall+0x10/0x10
? _raw_spin_unlock_irqrestore+0x2c/0x50
? __create_object+0x59/0x80
? kasan_unpoison+0x27/0x60
do_init_module+0x27b/0x7d0
? __pfx_do_init_module+0x10/0x10
? kasan_quarantine_put+0x84/0x1d0
? kfree+0x32c/0x510
? load_module+0x561e/0x5ff0
load_module+0x54fe/0x5ff0
? __pfx_load_module+0x10/0x10
? security_file_permission+0x20/0x40
? kernel_read_file+0x23d/0x6e0
? mmap_region+0x235/0x4a0
? __pfx_kernel_read_file+0x10/0x10
? __file_has_perm+0x2c0/0x3e0
init_module_from_file+0x158/0x180
? __pfx_init_module_from_file+0x10/0x10
? __lock_acquire+0x45a/0x1ba0
? idempotent_init_module+0x315/0x610
? lock_release+0xc9/0x290
? lock
---truncated---

🎖@cveNotify

🚨 CVE-2026-64601
In the Linux kernel, the following vulnerability has been resolved:

ALSA: us144mkii: capture_urb_complete: redundant usb_anchor_urb corrupts anchor list on each resubmission

In capture_urb_complete(), usb_anchor_urb() is called on every
completion callback, but the URB is already anchored from the
initial submission in tascam_trigger_start(). Each redundant call
corrupts the anchor's doubly-linked list and inflates the URB
refcount. When usb_kill_anchored_urbs() traverses the list during
stream stop / suspend / disconnect, the corrupted list leads to
use-after-free.

Remove the redundant usb_anchor_urb() from the resubmit path.

🎖@cveNotify

🚨 CVE-2026-64602
In the Linux kernel, the following vulnerability has been resolved:

iio: adc: spear: Initialize completion before requesting IRQ

In the report from Jaeyoung Chung:

"spear_adc_probe() in drivers/iio/adc/spear_adc.c registers its
interrupt handler with devm_request_irq() before it initializes
st->completion with init_completion(). If an interrupt arrives after
devm_request_irq() and before init_completion(), the handler calls
complete() on an uninitialized completion, causing a kernel panic.

The probe path, in spear_adc_probe():

iodev = devm_iio_device_alloc(&pdev->dev, sizeof(*st)); /* st kzalloc-zeroed */
...
retval = devm_request_irq(&pdev->dev, irq, spear_adc_isr, 0,
LPC32XXAD_NAME, st); /* register handler */
...
init_completion(&st->completion); /* initialize completion */

spear_adc_isr() calls complete():

complete(&st->completion);

If the device raises an interrupt before init_completion() runs,
complete() acquires the uninitialized wait.lock and walks the zeroed
task_list in swake_up_locked(). The zeroed task_list makes list_empty()
return false, so swake_up_locked() dereferences a NULL list entry,
triggering a KASAN wild-memory-access."

Fix the chance of a spurious IRQ causing an uninitialized pointer
dereference by moving init_completion() above devm_request_irq().

🎖@cveNotify

🚨 CVE-2026-64603
In the Linux kernel, the following vulnerability has been resolved:

platform/x86: intel-hid: Protect ACPI notify handler against recursion

Since commit e2ffcda16290 ("ACPI: OSL: Allow Notify () handlers to run on
all CPUs") ACPI notify handlers like the intel-hid notify_handler() may
run on multiple CPU cores racing with themselves.

On convertibles and detachables (matched by DMI chassis-type 31 and 32 in
dmi_auto_add_switch[]) the SW_TABLET_MODE input device is registered
lazily from notify_handler() on the first tablet-mode event, via
intel_hid_switches_setup(). When two such events race on different CPUs
both can pass the !priv->switches check and register the priv->switches
input device twice, resulting in a duplicate sysfs entry and a subsequent
NULL pointer dereference.

This is the same class of bug fixed by commit e075c3b13a0a ("platform/x86:
intel-vbtn: Protect ACPI notify handler against recursion") for the
sibling intel-vbtn driver.

Protect intel-hid notify_handler() from racing with itself with a mutex
to fix this.

🎖@cveNotify

🚨 CVE-2026-64604
In the Linux kernel, the following vulnerability has been resolved:

KVM: VMX: Grab vmcs12 on CR8 interception update iff vCPU is in guest mode

When updating CR8 intercepts, get vmcs12 if and only if the vCPU is in
guest mode so that a future change can have update CR8 intercepts during
vCPU creation, without running afoul of get_vmcs12()'s lockdep assertion.

------------[ cut here ]------------
debug_locks && !(lock_is_held(&(&vcpu->mutex)->dep_map) || !refcount_read(&vcpu->kvm->users_count))
WARNING: arch/x86/kvm/vmx/nested.h:61 at get_vmcs12 arch/x86/kvm/vmx/nested.h:60 [inline], CPU#0: syz.2.19/5879
WARNING: arch/x86/kvm/vmx/nested.h:61 at vmx_update_cr8_intercept+0x3de/0x4e0 arch/x86/kvm/vmx/vmx.c:6879, CPU#0: syz.2.19/5879
Modules linked in:
CPU: 0 UID: 0 PID: 5879 Comm: syz.2.19 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
RIP: 0010:get_vmcs12 arch/x86/kvm/vmx/nested.h:60 [inline]
RIP: 0010:vmx_update_cr8_intercept+0x3de/0x4e0 arch/x86/kvm/vmx/vmx.c:6879
Call Trace:
<TASK>
apic_update_ppr arch/x86/kvm/lapic.c:984 [inline]
kvm_lapic_reset+0x1c24/0x2980 arch/x86/kvm/lapic.c:3023
kvm_vcpu_reset+0x44c/0x1bf0 arch/x86/kvm/x86.c:12986
kvm_arch_vcpu_create+0x746/0x8b0 arch/x86/kvm/x86.c:12847
kvm_vm_ioctl_create_vcpu+0x428/0x930 virt/kvm/kvm_main.c:4201
kvm_vm_ioctl+0x893/0xd50 virt/kvm/kvm_main.c:5159
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl+0xfc/0x170 fs/ioctl.c:583
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x174/0x580 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>

No functional change intended.

🎖@cveNotify

🚨 CVE-2026-19022
A vulnerability was determined in OpenHands up to 0.62.0. The affected element is the function initialize_repo of the file OpenHands/resolver/send_pull_request.py. This manipulation causes command injection. Remote exploitation of the attack is possible. The vendor deleted the original GitHub issue report. It appears that the affected path/file got removed in version 1.7.0.

🎖@cveNotify

🚨 CVE-2026-64640
Apache Polaris did not consistently validate storage locations supplied during table and view registration.

An authenticated principal with permission to register a table or view could, depending on the affected release and registration path, cause Polaris to use the catalog's storage credentials to read a caller-selected Iceberg metadata file before verifying that the file was within the catalog's allowed storage locations.

If the catalog's underlying credentials could read an object outside that boundary, this could disclose limited information from the object.


Polaris could also accept registration metadata located within an allowed location that contained references to storage locations outside the allowed boundary.

This second condition did not itself cause Polaris to read the referenced external locations during registration.


The demonstrated impact is limited to confidentiality.

No unauthorized data modification or availability impact has been demonstrated.


The server-side read requires a deployment using S3 credential vending and an object outside the allowed locations that the catalog's underlying storage credentials can read.

Exploitation requires an authenticated principal with table- or view-registration privileges.

🎖@cveNotify

🚨 CVE-2026-46579
A flaw was found in the OpenShift Router. When a Route has `insecureEdgeTerminationPolicy` set to Allow, the HTTP frontend does not remove `X-SSL-Client-*` headers from incoming requests. This allows an unauthenticated attacker to send plain HTTP requests with crafted `X-SSL-Client-*` headers. As a result, backends relying on these headers for mutual TLS (Transport Layer Security) authentication can be bypassed, enabling the attacker to impersonate client certificate identities.

🎖@cveNotify

🚨 CVE-2026-16242
A flaw was found in the Konnectivity proxy-server configuration for hosted control planes. The agent-facing listener was started without --cluster-ca-cert (and without token-based agent authentication), so client certificates were not validated. A remote attacker who can reach the Konnectivity cluster endpoint could connect as an unauthenticated agent, join the routing pool, and potentially proxy, inspect, modify, or drop control-plane-to-node traffic.

🎖@cveNotify

🚨 CVE-2026-65458
Exposure of Sensitive System Information to an Unauthorized Control Sphere vulnerability in Chouby Polylang and Chouby Polylang Pro allows Retrieve Embedded Sensitive Data.

This issue affects Polylang: through 3.8.5; Polylang Pro: through 3.8.5.

🎖@cveNotify

🚨 CVE-2026-55978
An improper access control vulnerability in CatchPulse could allow a non-administrative local attacker to connect to an unrestricted kernel filter communication port and bypass CatchPulse's security policy enforcement.

🎖@cveNotify

🚨 CVE-2026-55979
An improper access control check in CatchPulse's named pipe communication interface could allow an attacker to invoke CatchPulse functions. This is limited to operations that enforce more restrictive security policies.

🎖@cveNotify