🚨 CVE-2026-71261
dr_libs dr_wav.h (all versions through current master) contains an integer overflow in W64 CUE chunk metadata parsing. In drwav__metadata_process_chunk(), a stage-1 capacity estimate truncates the 64-bit W64 chunk sizeInBytes to size_t before dividing by DRWAV_CUE_POINT_BYTES; on 32-bit builds this truncation causes the pre-allocated extra metadata capacity to be computed incorrectly. The subsequent read in drwav__read_cue_to_metadata_obj() computes the actual cue point count and allocation size using the full-precision, attacker-controlled cuePointCount field without cross-checking it against the stage-1 capacity estimate, and the only bounds enforcement on the resulting memory region (drwav__metadata_get_memory()) is a DRWAV_ASSERT, which compiles to a no-op under -DNDEBUG (the default for release builds). A crafted W64 WAV file can therefore cause a heap buffer overflow in any 32-bit application parsing untrusted WAV metadata.

🎖@cveNotify

🚨 CVE-2026-71262
IoTSharp BlobStorageController.cs lacks the [Authorize] attribute applied to every other controller in the application (DevicesController, CustomersController, TenantsController, etc.), and no global authorization FallbackPolicy is configured in Startup.cs, leaving its Upload/Download/List/Modify/Delete endpoints reachable by unauthenticated remote attackers. The path/filename parameters passed to these endpoints (e.g. `_blob.WriteFileAsync($"{path}/{formFile.FileName}", ...)`) are used without sanitization, enabling path traversal that allows writing, reading, modifying, and deleting arbitrary files outside the intended blob storage directory, including web-accessible paths that can be leveraged for remote code execution via webshell upload.

🎖@cveNotify

🚨 CVE-2026-71263
The LINUXTCP port of FreeModbus contains an off-by-one bounds check in xMBPortTCPPool() (demo/LINUXTCP/port/porttcp.c). The check `if (usTCPFrameBytesLeft > MB_TCP_BUF_SIZE)` uses a strict greater-than comparison instead of greater-than-or-equal against the 263-byte MB_TCP_BUF_SIZE limit. An MBAP frame with a Length field of 264 makes usTCPFrameBytesLeft equal to 263, which passes the flawed check, and the subsequent recv() call writes up to 263 bytes starting at buffer offset 7 into the 263-byte static buffer aucTCPBuf, overflowing it by 7 bytes into the adjacent static variable usTCPBufPos. A single crafted, unauthenticated Modbus TCP packet triggers the overflow, since Modbus has no built-in authentication.

🎖@cveNotify

🚨 CVE-2026-71264
WLED's GET /json/cfg endpoint (registered in wled00/wled_server.cpp) calls serveJson() with no settings-PIN check, unlike the /edit endpoint which explicitly checks correctPIN, disclosing the device's general configuration (network, hardware, LED setup) to any unauthenticated client on the network. Separately, the settings-PIN unlock state is tracked via a single global boolean `correctPIN` (wled00/wled.h), not per-session state: once any single client submits the correct 4-digit PIN via POST /json, correctPIN becomes true for every client, granting all subsequent unauthenticated clients full configuration-write access (OTA firmware updates, WiFi reconfiguration, factory reset) until the device reboots.

🎖@cveNotify

🚨 CVE-2026-71265
Domoticz's MochadTCP::MatchLine() handler for MOCHAD_RFSEC messages (hardware/MochadTCP.cpp) copies network-received data from the up-to-1028-byte m_mochadbuffer into a fixed 50-byte stack buffer tempRFSECbuf using strcpy() with no length check, across three separate code branches (DS10A/KR10A/MS10A device types). An attacker on the local network segment able to reach the Mochad TCP bridge (default port 1099, no authentication) can send a crafted packet that overflows tempRFSECbuf by up to several hundred bytes, corrupting the Domoticz worker thread's stack.

🎖@cveNotify

🚨 CVE-2026-71266
tinyobjloader-c's tinyobj_parse_and_index_mtl_file() (tinyobj_loader_c.h) reads each line of a .mtl material file into a fixed 4096-byte stack buffer `linebuf` via memcpy(linebuf, p, p_len), guarded only by `assert(p_len < 4095)`. Because assert() compiles to a no-op under -DNDEBUG (standard for release builds), a crafted .mtl file containing a line (e.g. a "newmtl" material name) longer than 4096 bytes overflows linebuf into the adjacent stack variable namebuf and beyond, corrupting the stack of any application that loads attacker-supplied 3D model/material files. The identical vulnerable pattern is duplicated in a second function in the same file.

🎖@cveNotify

🚨 CVE-2026-71267
microtar's mtar_write_file_header() and mtar_write_dir_header() functions (src/microtar.c) copy a caller-supplied entry name into the 100-byte `name` field of a stack-allocated mtar_header_t via strcpy(h.name, name), with no check that strlen(name) is less than 100 before the copy. Any application that calls these functions with an externally-influenced filename longer than 99 characters (e.g. when archiving user-supplied or attacker-controlled filenames) triggers a stack buffer overflow.

🎖@cveNotify

🚨 CVE-2026-71268
OpenPLC Runtime v3's compile_program() function (webserver/openplc.py) parses `(*FILE:path content*)` directives from uploaded Structured Text (.st) program files and writes the referenced content to `os.path.join('./core', file_path)` with no validation that file_path stays within the ./core directory. A crafted .st file containing a directive such as `(*FILE:../../../etc/cron.d/x * * * * root <command>*)` writes attacker-controlled content to an arbitrary filesystem path, enabling remote code execution (e.g. via cron or SSH authorized_keys). A path-validation function, validate_file_path(), exists elsewhere in the codebase (webserver/credentials.py) but is never invoked from compile_program(), leaving the sink unprotected. OpenPLC additionally ships with hardcoded default credentials (openplc:openplc), lowering the practical bar for exploitation.

🎖@cveNotify

🚨 CVE-2026-71269
Node-RED's local-filesystem library storage module (getLibraryEntry() and saveLibraryEntry() in packages/node_modules/@node-red/runtime/lib/storage/localfilesystem/library.js), reachable via GET/POST /library/:lib/:type/*path, joins the user-supplied path parameter directly into the filesystem path via fspath.join(libDir, type, path) with no traversal sanitization, containment check, or path normalization/prefix verification. An authenticated user (including read-only-scoped tokens for the read path) can supply a path containing `../` sequences to read arbitrary files outside the library directory; a user with write access can write arbitrary files, enabling remote code execution via SSH authorized_keys or cron injection. This is a distinct, separately unpatched traversal from the previously fixed CVE-2021-21298 (Projects API).

🎖@cveNotify

🚨 CVE-2026-71270
Stirling-PDF's POST /api/v1/convert/url/pdf endpoint (ConvertWebsiteToPDF.java) was not updated with the CustomHtmlSanitizer/SsrfProtectionService SSRF protections that were added to three sibling conversion endpoints (html/pdf, file/pdf, markdown/pdf). The endpoint validates only that the initial requested URL resolves to a public IP, then fetches the page's HTML server-side and hands it, unsanitized, to a WeasyPrint subprocess. Embedded resource references in the fetched HTML (e.g. `<img src="http://169.254.169.254/...">`) are fetched by WeasyPrint with no per-resource SSRF filtering, allowing an attacker-controlled page to cause the server to retrieve cloud metadata endpoints or internal network resources and leak their contents back into the generated PDF.

🎖@cveNotify

🚨 CVE-2026-71271
Memos' webhook URL validation, isReservedIP() (internal/webhook/validate.go), checks a candidate IP against a reservedCIDRs list that omits 0.0.0.0/8 and never calls ip.IsUnspecified() — unlike the correctly implemented sibling function isInternalIP() in internal/httpgetter/html_meta.go, which does. Because Linux redirects connections to 0.0.0.0 to loopback (127.0.0.1), an attacker registering a webhook URL of http://0.0.0.0:PORT/ bypasses the reserved-IP check and causes the Memos server to make outbound HTTP requests to its own loopback interface, exposing internal-only services.

🎖@cveNotify

🚨 CVE-2026-71272
Memos' webhook dispatch function safeDialContext() (internal/webhook/webhook.go) resolves the target hostname via net.DefaultResolver.LookupHost() and validates the resulting IPs against reserved ranges, but then dials net.JoinHostPort(host, port) using the original hostname rather than the already-validated IP address. Because net.Dialer.DialContext() performs its own independent DNS resolution, an attacker controlling DNS for the webhook's hostname (e.g. via a short TTL) can return a public, allowed IP during validation and a different, internal IP at dial time — a classic time-of-check/time-of-use DNS-rebinding bypass of the SSRF protection.

🎖@cveNotify

🚨 CVE-2026-71273
OpenBK7231T's /cfg_wifi_set endpoint (src/httpserver/http_fns.c) accepts configuration changes via a plain GET request with no CSRF token. If the `web_admin_password_enabled` parameter is absent from the request, an else-branch silently clears the device's web admin password to an empty string. A one-click CSRF payload (e.g. an <img> tag pointing at /cfg_wifi_set with new SSID/password parameters and web_admin_password_enabled omitted) visited by an authenticated admin's browser both hijacks the device's WiFi configuration and disables its web password protection.

🎖@cveNotify

🚨 CVE-2026-71274
OpenBK7231T's CHANNEL_SetLabel() (src/cmnds/cmd_channels.c) stores channel labels received via the MQTT SetChannelLabel command using strdup() with no HTML sanitization. CHANNEL_GetLabel() returns these labels unsanitized, and they are rendered via hprintf255() at 15+ locations in src/httpserver/http_fns.c with no HTML encoding. An attacker with MQTT broker access (commonly unauthenticated in real deployments) can set a channel label containing a <script> payload that executes when any user views the device's web panel.

🎖@cveNotify

🚨 CVE-2026-71275
OpenBK7231T's http_fn_ota_exec() (src/httpserver/http_fns.c) reflects the `host` query parameter directly into an HTML response via hprintf255(request, "<h3>OTA requested for %s!</h3>", tmpA) with no HTML encoding, allowing a crafted URL such as /ota_exec?host=<script>alert(1)</script> to execute JavaScript in an authenticated admin's browser when they click a malicious link.

🎖@cveNotify

🚨 CVE-2026-71276
Magistrala (formerly Mainflux)'s message-readers API reads a `format` value from the HTTP query string (readers/api/http/transport.go) with no validation and interpolates it directly into raw SQL queries via fmt.Sprintf() in both the PostgreSQL reader (readers/postgres/messages.go: `fmt.Sprintf("SELECT * FROM %s WHERE %s ...", format, cond)`) and the TimescaleDB reader (readers/timescale/messages.go, same pattern), enabling SQL injection by any authenticated user able to query channel messages.

🎖@cveNotify

🚨 CVE-2026-71277
rust-iot-platform's AuthToken request-guard implementation (api/src/main.rs) only checks whether the Authorization HTTP header is present, and never validates its value against any session, token store, or signature. Any request carrying an arbitrary non-empty Authorization header (e.g. `Authorization: fake`) satisfies the guard, granting access to every endpoint protected only by this request guard.

🎖@cveNotify

🚨 CVE-2026-71279
Zigbee2MQTT's ExternalJSExtension.getFilePath() (lib/extension/externalJS.ts) joins a `name` parameter received via an MQTT message (topic zigbee2mqtt/bridge/request/extension/save) into the extensions base path using path.join(basePath, name) with no sanitization. Because path.join() resolves `../` sequences, a name such as `../../tmp/evil.js` escapes the intended extensions directory. The extension handler only validates that the name ends in .js/.mjs/.cjs, writes the file, and then dynamically imports it via Node.js import(), achieving remote code execution. Requires the `enable_external_js` config option (off by default, but commonly enabled in legacy installs) and MQTT broker access, which is frequently unauthenticated in real deployments. The identical unsanitized getFilePath() is also used by the extension-removal handler, enabling arbitrary file deletion.

🎖@cveNotify

🚨 CVE-2026-71280
go-shiori's DownloadBookmark() (internal/core/download.go) fetches a caller-supplied bookmark URL using a plain http.Client with no custom DialContext or destination-IP validation (no IsLoopback(), IsPrivate(), IsUnspecified(), or IsLinkLocalUnicast() checks). An authenticated user creating or updating a bookmark via POST /api/bookmark, PUT /api/v1/bookmarks/cache, or POST /api/bookmarks/ext can supply a loopback (127.0.0.1) or 0.0.0.0 (which Linux redirects to loopback) URL, causing the server to make outbound requests to internal-only services, cloud metadata endpoints, or other network-restricted resources.

🎖@cveNotify

🚨 CVE-2026-71281
Hugging Face peft's LoRA-GA and CorDA initialization modules (src/peft/tuners/lora/corda.py lines ~102 and ~163, and src/peft/tuners/lora/loraga.py line ~101) call torch.load() on config-specified cache/covariance files without weights_only=True, bypassing peft's own safe-loading wrapper used elsewhere in the codebase. Because torch.load() without weights_only=True performs full pickle deserialization, loading a malicious cache or covariance file (e.g. a shared/downloaded LoRA-GA or CorDA cache) results in arbitrary code execution.

🎖@cveNotify

🚨 CVE-2026-71282
ChirpStack's SQLite-backend device tag filtering (chirpstack/src/storage/device.rs, in both get_count() and list()) interpolates the user-supplied tag KEY directly into a raw SQL fragment via Rust's format!() macro (`dsl::sql::<Bool>(&format!("device.tags->>'{}' =", k)).bind::<Text, _>(v)`), while only the tag VALUE is safely parameter-bound via Diesel's .bind(). An authenticated user with device-list access can inject SQL via a crafted tag key when the SQLite backend (chirpstack-sqlite package) is in use; the PostgreSQL backend is unaffected as it uses Diesel's native JSONB containment operator instead of raw SQL string formatting.

🎖@cveNotify