🚨 CVE-2026-71244
Paperless-ngx's MailAccountViewSet.test() action, when called with an existing account's ID and a masked password field, reuses the stored password, account_type, refresh_token, and expiration from that existing account while allowing the caller to supply a different imap_server, imap_port, and imap_security in the same request. The test connection then authenticates to the caller-specified server using the real stored credentials. A user holding only object-level change_mailaccount permission on the target account (not full admin) can redirect the test connection to an attacker-controlled IMAP host, causing the real stored IMAP password or OAuth token to be sent to that host.

🎖@cveNotify

🚨 CVE-2026-71245
Mautic's getLeadIdsByFieldValueAction (LeadBundle/Controller/AjaxController.php) reads a field parameter from the request, sanitizes it only with InputHelper::clean() (which HTML-entity-encodes quotes and angle brackets but does not restrict other characters), and passes it into LeadRepository::buildQueryForGetLeadsByFieldValue() where it is concatenated directly as a raw SQL column identifier ($col = 'l.'.$field) rather than being validated against a whitelist of real column names or passed as a bound parameter. Since Doctrine cannot parameterize identifiers, and the sanitizer does not block spaces, parentheses, or other SQL-relevant characters, an attacker can inject SQL via the field name itself. The action requires only a valid session (any authenticated user), unlike sibling actions in the same controller that carry additional permission checks.

🎖@cveNotify

🚨 CVE-2026-71246
Pixelfed's SearchController (behind the auth middleware) accepts a URL via its remote-search parameters and fetches it server-side through ActivityPubFetchService, whose validateUrl() only blocks the literal hosts 127.0.0.1, localhost, and ::1 and requires https, without checking the resolved IP against private, internal, or link-local ranges (e.g. 169.254.169.254). Optional DNS validation is disabled by default and, when enabled, only confirms a DNS record exists without filtering by IP range. The fetch response body is returned to the requester only when the Content-Type matches an ActivityPub content type, making this a semi-blind but authenticated SSRF primitive reachable by any logged-in user.

🎖@cveNotify

🚨 CVE-2026-71247
Documenso's sign-field-with-token.ts, used by the live document-signing UI, allows a recipient with the ASSISTANT role to fetch and complete fields belonging to any later-or-equal-order, not-yet-signed recipient in the same envelope, with no restriction on field type. The handler upserts a Signature record tied to the target field's recipientId with no check that field.type is SIGNATURE and the acting recipient owns it. A newer V2 signing path (sign-envelope-field.ts) explicitly blocks assistants from completing SIGNATURE fields, and the project's own test suite comments confirm this guard is absent from the V1 path used here. In a sequential-signing document, an assistant recipient can therefore forge another signer's signature field.

🎖@cveNotify

🚨 CVE-2026-71248
Inventory-Management-System-PHP's login.php constructs its authentication query via direct string concatenation of raw POST parameters: $sql = "select * from user where email = '$email' and password = '$password'", with no escaping or parameterization, allowing authentication bypass via a payload such as email=' OR 1=1 LIMIT 1-- -. Separately, delete.php executes mysqli_query($db, "DELETE FROM product WHERE product_id=" . $_GET['id']) with no authentication check and no validation of the id parameter, allowing an unauthenticated attacker to delete arbitrary product rows or perform blind SQL injection via payloads such as id=0 OR SLEEP(5).

🎖@cveNotify

🚨 CVE-2026-71250
Firefly III's webhook URL validator (IsValidWebhookUrl.php) filters most private/reserved IPv4 ranges but contains an explicit early-return that allows any resolved address in 127.0.0.0/8, permitting an authenticated user (with webhooks enabled, which is off by default) to configure a webhook targeting loopback services on the server. Additionally, the validator resolves the target hostname once via gethostbyname() at validation time, but the actual outbound request (StandardWebhookSender.php, via Guzzle) re-resolves the hostname independently at send time, allowing a DNS-rebinding attacker to pass validation against a public IP and have the real request delivered to a private or internal address. The webhook response body is only written to a server-side debug log, not returned to the triggering user, so this is a blind SSRF primitive rather than one with direct response read-back.

🎖@cveNotify

🚨 CVE-2026-71251
Akaunting's shared download route (app/Http/Controllers/Common/Uploads.php::download(), reachable at uploads/{id}/download behind only generic auth middleware) fetched the requested Media record by ID with no verification that it belonged to the requesting portal customer's own company, allowing any authenticated portal customer to download any other company's uploaded files by guessing or enumerating media IDs. Fixed in commit 80ef6d3 (2026-07-12), which added an explicit ownership check comparing the media's parent record contact_id against the requesting user's own contact.

🎖@cveNotify

🚨 CVE-2026-71252
toner-management's admin state-changing handlers (add.php, edit.php, delete.php under admin/toners, admin/toner-brands, admin/printers, and related admin subdirectories) executed INSERT/UPDATE/DELETE database operations with no authentication or authorization check, while access control was enforced only in listing views. An unauthenticated remote attacker could invoke these handlers directly to create, modify, or destroy application data. The vendor has since merged a fix requiring an authenticated admin session before any such handler proceeds.

🎖@cveNotify

🚨 CVE-2026-18933
The wp-downloadmanager WordPress plugin, in version 1.68.11 (also affecting the 6.9.4 release line), allows an admin-privileged user (current_user_can('manage_downloads')) to upload arbitrary files via download-add.php with no extension or MIME-type validation of any kind - no wp_check_filetype_and_ext(), no validate_file(), and no extension blocklist exist anywhere in the upload handler. The destination path is additionally built by concatenating the raw, unsanitized $_POST['file_upload_to'] value with no traversal check (no ../ filtering, no basename()/realpath() applied). Since the base download path is required to live under WP_CONTENT_DIR (a web-accessible location), an uploaded PHP file lands in a web-servable path and can be directly executed, resulting in remote code execution. The plugin's own later changelog confirms these protections were absent in this version: v1.69 added file-type validation via wp_check_filetype_and_ext(), and v1.69.1 added directory-traversal protection - neither existed in 1.68.11.

🎖@cveNotify

🚨 CVE-2026-61891
In Eclipse Theia versions up to and including 1.73.1, the `@theia/filesystem` backend exposes HTTP file-download endpoints (`GET /file`, `GET /files/`, `PUT /files/`) that convert a client-supplied URI directly to a filesystem path and stream the file, without confining it to the workspace or any allow-listed root. In browser (non-Electron) deployments the connection token is enforced only on WebSocket upgrades; the HTTP middleware in `@theia/core` re-issues the cookie and calls `next()` without rejecting tokenless HTTP requests, so these endpoints are reachable without a valid token. As a result an unauthenticated client can read any file readable by the backend process, including files outside the opened workspace (for example `/etc/hosts`, SSH keys, or tokens). Electron mode uses a separate `ElectronSecurityToken` and is not affected via this path.

🎖@cveNotify

🚨 CVE-2026-71254
nanoMODBUS through v1.23.0 contains an out-of-bounds write in the Modbus server-side handle_read_file_record() function (FC 0x14, Read File Record) in nanomodbus.c. The function validates that the total request size does not exceed 245 bytes and that each sub-request's record_length is at most 124, but it never validates the CUMULATIVE response size across all sub-requests before processing them. The accumulator response_data_size is declared as uint8_t and is incremented by 2 + record_length*2 for each of up to 35 sub-requests; with 35 sub-requests of record_length=124, the cumulative demand is 8750 bytes, which overflows the uint8_t accumulator. A subsequent loop then calls get_n(), an internal function with no bounds checking, once per sub-request to obtain a pointer into the 260-byte msg.buf receive buffer and advances the internal buf_idx by up to 248 bytes per call; swap_regs() then writes to that pointer unconditionally. A single crafted FC 0x14 request from an unauthenticated network client can cause up to ~8490 bytes to be written out of bounds past the 260-byte buffer, corrupting adjacent memory in the server process and leading to denial of service or potential remote code execution, particularly on embedded/bare-metal targets without memory protection.

🎖@cveNotify

🚨 CVE-2026-71255
nanoMODBUS through v1.23.0 contains an out-of-bounds write in the Modbus client-side recv_read_device_identification_res() function (FC 0x2B/MEI 0x0E, Read Device Identification) in nanomodbus.c. The server-supplied object_length field (0-246) is validated only against the remaining PDU size (res_size_left) and is never validated against the caller-supplied buffers_length parameter. After copying data with strncpy(buffers_out[buf_index], str, buffers_length), the code unconditionally writes a NUL terminator at buffers_out[buf_index][object_length]. When a malicious or compromised Modbus server sends a response with object_length greater than or equal to the client's buffers_length, this NUL write lands past the end of the caller-provided buffer, corrupting adjacent stack or heap memory on the client.

🎖@cveNotify

🚨 CVE-2026-71256
nanoMODBUS through v1.23.0 contains an out-of-bounds stack read leading to a wild-pointer write in nmbs_read_device_identification_basic() / recv_read_device_identification_res() in nanomodbus.c. A fixed 3-element stack array order[3] = {0,1,2} maps object IDs to buffer indices. The server-supplied object_id field (0-255, read directly from the wire) is used without any bounds check as buf_index = order[object_id]. When a malicious Modbus server sends a Read Device Identification response with object_id >= 3, this reads an out-of-bounds/garbage byte from the stack adjacent to order[], which is then used as an index into a 3-element buffers[] array of char* pointers. The resulting wild pointer is passed to strncpy() as the destination, causing an arbitrary-address write with server-controlled data.

🎖@cveNotify

🚨 CVE-2026-0516
A improper neutralization of HTTP Headers for Scripting Syntax vulnerability in SonicOS could allow a remote attacker to manipulate the Host header and redirect firewall management users to arbitrary web domains.

🎖@cveNotify

🚨 CVE-2026-16022
@oblique/cli 15.4.0 contains an OS command injection vulnerability in the project creation functionality. The CLI constructs shell commands through string concatenation and executes them with execSync(). A user-controlled project-name argument is inserted into the shell command without proper neutralization, allowing shell metacharacters to execute additional operating-system commands when the CLI is invoked with a crafted project name.

🎖@cveNotify

🚨 CVE-2026-71225
A flaw was found in libkcapi. When performing one-shot symmetric cipher operations on large inputs (over 64 KiB) in stateful modes such as Counter (CTR) or Cipher Block Chaining (CBC), the library improperly reuses the Initialization Vector (IV) for each internal data chunk. A remote attacker could potentially exploit this by making an application that uses libkcapi process specially crafted large inputs. This can lead to a significant weakening of data confidentiality, as the repeated IV use can expose relationships in encrypted plaintext, and may also affect data integrity by causing incorrect cryptographic processing.

🎖@cveNotify

🚨 CVE-2026-71227
A flaw was found in libkcapi. A local attacker can influence an application that uses the Asynchronous Input/Output (AIO) interface. By reusing an AIO-enabled handle after a prior completion error, the _kcapi_aio_read_all() function can enter a non-terminating wait loop. This can lead to a persistent denial of service, making the affected application or thread unresponsive.

🎖@cveNotify

🚨 CVE-2026-71259
ESPHome through 2026.7.0-dev contains an operator-precedence bug in the cv.url() validator in esphome/config_validation.py: `if parsed.scheme and parsed.netloc or parsed.scheme == "file": return parsed.geturl()`. Because `and` binds tighter than `or`, any file: URI passes validation regardless of netloc. This validator gates the `url:` field of the external_components YAML directive's git source schema, which is passed to `git clone` (git supports file:// natively). A crafted `external_components` block with `url: "file:///attacker/repo"` clones an attacker-controlled local path, which is then added to Python's import machinery via ESPHome's component loader, executing arbitrary Python code when the YAML configuration is processed (e.g. via `esphome config`/`esphome run`).

🎖@cveNotify

🚨 CVE-2026-71260
ESPHome through 2026.7.0-dev discloses plaintext passwords via its web_server component. In WebServer::text_json_() (esphome/components/web_server/web_server.cpp), a text entity configured with mode: password (TEXT_MODE_PASSWORD) has its JSON "state" field correctly masked as "********", but the same serialization path unconditionally writes the raw password into the JSON "value" field via set_json_icon_state_value()/set_json_value(). Because web_server listens on port 80 with no authentication by default, any attacker on the local network can retrieve the plaintext password (e.g. WiFi credentials, API tokens) via GET /text/<entity_id> or the /events EventSource stream.

🎖@cveNotify

🚨 CVE-2026-71261
dr_libs dr_wav.h (all versions through current master) contains an integer overflow in W64 CUE chunk metadata parsing. In drwav__metadata_process_chunk(), a stage-1 capacity estimate truncates the 64-bit W64 chunk sizeInBytes to size_t before dividing by DRWAV_CUE_POINT_BYTES; on 32-bit builds this truncation causes the pre-allocated extra metadata capacity to be computed incorrectly. The subsequent read in drwav__read_cue_to_metadata_obj() computes the actual cue point count and allocation size using the full-precision, attacker-controlled cuePointCount field without cross-checking it against the stage-1 capacity estimate, and the only bounds enforcement on the resulting memory region (drwav__metadata_get_memory()) is a DRWAV_ASSERT, which compiles to a no-op under -DNDEBUG (the default for release builds). A crafted W64 WAV file can therefore cause a heap buffer overflow in any 32-bit application parsing untrusted WAV metadata.

🎖@cveNotify

🚨 CVE-2026-71262
IoTSharp BlobStorageController.cs lacks the [Authorize] attribute applied to every other controller in the application (DevicesController, CustomersController, TenantsController, etc.), and no global authorization FallbackPolicy is configured in Startup.cs, leaving its Upload/Download/List/Modify/Delete endpoints reachable by unauthenticated remote attackers. The path/filename parameters passed to these endpoints (e.g. `_blob.WriteFileAsync($"{path}/{formFile.FileName}", ...)`) are used without sanitization, enabling path traversal that allows writing, reading, modifying, and deleting arbitrary files outside the intended blob storage directory, including web-accessible paths that can be leveraged for remote code execution via webshell upload.

🎖@cveNotify