🚨 CVE-2026-67592
It was not possible to govern the maximum number of transfer frames per incoming delivery, enabling an authenticated attacker to cause excessive resource usage and potential denial of service.
This issue affects Apache Qpid ProtonJ2: through 1.1.0.
Users are recommended to upgrade to version 1.2.0, which fixes the issue
🎖@cveNotify
It was not possible to govern the maximum number of transfer frames per incoming delivery, enabling an authenticated attacker to cause excessive resource usage and potential denial of service.
This issue affects Apache Qpid ProtonJ2: through 1.1.0.
Users are recommended to upgrade to version 1.2.0, which fixes the issue
🎖@cveNotify
🚨 CVE-2026-68073
A pre-authentication attacker could leverage type nesting to cause a StackOverflowError potentially leading to denial of service.
This issue affects Apache Qpid Broker-J: through 10.0.1.
Users are recommended to upgrade to version 10.1.0, which fixes the issue.
🎖@cveNotify
A pre-authentication attacker could leverage type nesting to cause a StackOverflowError potentially leading to denial of service.
This issue affects Apache Qpid Broker-J: through 10.0.1.
Users are recommended to upgrade to version 10.1.0, which fixes the issue.
🎖@cveNotify
🚨 CVE-2026-68075
An authenticated attacker could exceed the session flow control incoming window potentially leading to denial of service.
This issue affects Apache Qpid Broker-J: through 10.0.1.
Users are recommended to upgrade to version 10.1.0, which fixes the issue.
🎖@cveNotify
An authenticated attacker could exceed the session flow control incoming window potentially leading to denial of service.
This issue affects Apache Qpid Broker-J: through 10.0.1.
Users are recommended to upgrade to version 10.1.0, which fixes the issue.
🎖@cveNotify
🚨 CVE-2026-68077
An authenticated attacker can craft a disposition frame with large or illegal ranges causing excessive CPU usage due to naive range handling, leading to denial of service.
This issue affects Apache Qpid Broker-J: through 10.0.1.
Users are recommended to upgrade to version 10.1.0, which fixes the issue.
🎖@cveNotify
An authenticated attacker can craft a disposition frame with large or illegal ranges causing excessive CPU usage due to naive range handling, leading to denial of service.
This issue affects Apache Qpid Broker-J: through 10.0.1.
Users are recommended to upgrade to version 10.1.0, which fixes the issue.
🎖@cveNotify
🚨 CVE-2026-68078
It was not possible to govern the maximum number of transfer frames per incoming delivery, enabling an authenticated attacker to cause excessive resource usage and potential denial of service.
This issue affects Apache Qpid Broker-J: through 10.0.1.
Users are recommended to upgrade to version 10.1.0, which fixes the issue.
🎖@cveNotify
It was not possible to govern the maximum number of transfer frames per incoming delivery, enabling an authenticated attacker to cause excessive resource usage and potential denial of service.
This issue affects Apache Qpid Broker-J: through 10.0.1.
Users are recommended to upgrade to version 10.1.0, which fixes the issue.
🎖@cveNotify
🚨 CVE-2026-68080
It was not possible to govern the rate at which the broker would respond to an echo flow, enabling an authenticated attacker to cause excessive resource usage and potential denial of service.
This issue affects Apache Qpid Broker-J: through 10.0.1.
Users are recommended to upgrade to version 10.1.0, which fixes the issue.
🎖@cveNotify
It was not possible to govern the rate at which the broker would respond to an echo flow, enabling an authenticated attacker to cause excessive resource usage and potential denial of service.
This issue affects Apache Qpid Broker-J: through 10.0.1.
Users are recommended to upgrade to version 10.1.0, which fixes the issue.
🎖@cveNotify
🚨 CVE-2026-70375
HashBrown CMS through 1.4.6 contains an OS Command Injection vulnerability (CWE-78) in the Git deployer component. GitDeployer.pullRepo() in src/Server/Entity/Deployer/GitDeployer.js executes AppService.exec(`git checkout ${this.branch || 'master'}`), interpolating the configured branch value directly into a shell command with no escaping. GitDeployer.validate() only rejects a single-quote character in the repo, branch, username, and password fields; shell metacharacters such as ';', '&&', '|', backticks, and '$()' are not filtered. A user able to configure a project's Git deployer settings can set a malicious branch value (e.g. 'master;<command>#') that executes automatically on every subsequent deployer operation (media upload, content save, etc.), since pullRepo() is invoked unconditionally at the start of each such operation. This is related to CVE-2020-6948, which addressed single-quote escaping of the repo, username, and password fields in the same file's git clone invocation; the branch field used in the unquoted git checkout command was not covered by that fix and remains injectable.
🎖@cveNotify
HashBrown CMS through 1.4.6 contains an OS Command Injection vulnerability (CWE-78) in the Git deployer component. GitDeployer.pullRepo() in src/Server/Entity/Deployer/GitDeployer.js executes AppService.exec(`git checkout ${this.branch || 'master'}`), interpolating the configured branch value directly into a shell command with no escaping. GitDeployer.validate() only rejects a single-quote character in the repo, branch, username, and password fields; shell metacharacters such as ';', '&&', '|', backticks, and '$()' are not filtered. A user able to configure a project's Git deployer settings can set a malicious branch value (e.g. 'master;<command>#') that executes automatically on every subsequent deployer operation (media upload, content save, etc.), since pullRepo() is invoked unconditionally at the start of each such operation. This is related to CVE-2020-6948, which addressed single-quote escaping of the repo, username, and password fields in the same file's git clone invocation; the branch field used in the unquoted git checkout command was not covered by that fix and remains injectable.
🎖@cveNotify
🚨 CVE-2026-71201
In OpenStack Ironic through 38.0.0, a project reader that makes a crafted request to Ironic can return Portgroups assigned to Nodes owned or leased by another project.
🎖@cveNotify
In OpenStack Ironic through 38.0.0, a project reader that makes a crafted request to Ironic can return Portgroups assigned to Nodes owned or leased by another project.
🎖@cveNotify
Launchpad
Bug #2162715 “[OSSA-2026-033] Ironic Portgroup Shard Filter Bypa...” : Bugs : OpenStack Security Advisory
A project-scoped reader can supply a valid shard name to the Ironic portgroup list API and receive portgroups belonging to nodes owned or leased by another project. The ordinary list path correctly applies the caller project filter. The shard path alone drops…
🚨 CVE-2026-24457
An unsafe parsing of OpenMQ's configuration in OpenMQ versions <6.5.2 and <6.9.0, allows a remote attacker to read arbitrary files from a MQ Broker's server. A full exploitation could read unauthorized files of the OpenMQ’s host OS. In some scenarios RCE could be achieved. This is fixed in OpenMQ 6.5.2, 6.9.0, and in GlassFish 7.0.26, 7.1.1, and 8.0.2.
🎖@cveNotify
An unsafe parsing of OpenMQ's configuration in OpenMQ versions <6.5.2 and <6.9.0, allows a remote attacker to read arbitrary files from a MQ Broker's server. A full exploitation could read unauthorized files of the OpenMQ’s host OS. In some scenarios RCE could be achieved. This is fixed in OpenMQ 6.5.2, 6.9.0, and in GlassFish 7.0.26, 7.1.1, and 8.0.2.
🎖@cveNotify
GitLab
CVE Reservation for issue #324 [Eclipse OpenMQ] Remote Arbitrary File Read (#84) · Issues · Eclipse Projects Security / cve-assignment…
The Eclipse Foundation is a Common Vulnerabilities and Exposures (CVE) Numbering Authority. This issue it used to request and track the progress...
🚨 CVE-2026-16242
A flaw was found in the Konnectivity proxy-server configuration for hosted control planes. The agent-facing listener was started without --cluster-ca-cert (and without token-based agent authentication), so client certificates were not validated. A remote attacker who can reach the Konnectivity cluster endpoint could connect as an unauthenticated agent, join the routing pool, and potentially proxy, inspect, modify, or drop control-plane-to-node traffic.
🎖@cveNotify
A flaw was found in the Konnectivity proxy-server configuration for hosted control planes. The agent-facing listener was started without --cluster-ca-cert (and without token-based agent authentication), so client certificates were not validated. A remote attacker who can reach the Konnectivity cluster endpoint could connect as an unauthenticated agent, join the routing pool, and potentially proxy, inspect, modify, or drop control-plane-to-node traffic.
🎖@cveNotify
🚨 CVE-2026-64534
In the Linux kernel, the following vulnerability has been resolved:
nvmet-tcp: check INIT_FAILED before nvmet_req_uninit in digest error path
In nvmet_tcp_try_recv_ddgst(), when a data digest mismatch is detected,
nvmet_req_uninit() is called unconditionally. However, if the command
arrived via the nvmet_tcp_handle_req_failure() path, nvmet_req_init()
had returned false and percpu_ref_tryget_live() was never executed. The
unconditional percpu_ref_put() inside nvmet_req_uninit() then causes a
refcount underflow, leading to a WARNING in
percpu_ref_switch_to_atomic_rcu, a use-after-free diagnostic, and
eventually a permanent workqueue deadlock.
Check cmd->flags & NVMET_TCP_F_INIT_FAILED before calling
nvmet_req_uninit(), matching the existing pattern in
nvmet_tcp_execute_request().
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
nvmet-tcp: check INIT_FAILED before nvmet_req_uninit in digest error path
In nvmet_tcp_try_recv_ddgst(), when a data digest mismatch is detected,
nvmet_req_uninit() is called unconditionally. However, if the command
arrived via the nvmet_tcp_handle_req_failure() path, nvmet_req_init()
had returned false and percpu_ref_tryget_live() was never executed. The
unconditional percpu_ref_put() inside nvmet_req_uninit() then causes a
refcount underflow, leading to a WARNING in
percpu_ref_switch_to_atomic_rcu, a use-after-free diagnostic, and
eventually a permanent workqueue deadlock.
Check cmd->flags & NVMET_TCP_F_INIT_FAILED before calling
nvmet_req_uninit(), matching the existing pattern in
nvmet_tcp_execute_request().
🎖@cveNotify
🚨 CVE-2026-64535
In the Linux kernel, the following vulnerability has been resolved:
nvmet-tcp: Fix potential UAF when ddgst mismatch
Shivam Kumar found via vulnerability testing:
When data digest is enabled on an NVMe/TCP connection and a digest
mismatch occurs on a non-final H2C_DATA PDU during an R2T-based
data transfer, the digest error handler in nvmet_tcp_try_recv_ddgst()
calls nvmet_req_uninit() — which performs percpu_ref_put() on the
submission queue — but does NOT mark the command as completed. It
does not set cqe->status, does not modify rbytes_done, and does not
clear any flag. When the subsequent fatal error triggers queue
teardown, nvmet_tcp_uninit_data_in_cmds() iterates all commands,
checks nvmet_tcp_need_data_in() for each one, and finds that the
already-uninited command still appears to need data (because
rbytes_done < transfer_len and cqe->status == 0). It therefore calls
nvmet_req_uninit() a second time on the same command — a double
percpu_ref_put against a single percpu_ref_get.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
nvmet-tcp: Fix potential UAF when ddgst mismatch
Shivam Kumar found via vulnerability testing:
When data digest is enabled on an NVMe/TCP connection and a digest
mismatch occurs on a non-final H2C_DATA PDU during an R2T-based
data transfer, the digest error handler in nvmet_tcp_try_recv_ddgst()
calls nvmet_req_uninit() — which performs percpu_ref_put() on the
submission queue — but does NOT mark the command as completed. It
does not set cqe->status, does not modify rbytes_done, and does not
clear any flag. When the subsequent fatal error triggers queue
teardown, nvmet_tcp_uninit_data_in_cmds() iterates all commands,
checks nvmet_tcp_need_data_in() for each one, and finds that the
already-uninited command still appears to need data (because
rbytes_done < transfer_len and cqe->status == 0). It therefore calls
nvmet_req_uninit() a second time on the same command — a double
percpu_ref_put against a single percpu_ref_get.
🎖@cveNotify
🚨 CVE-2026-18477
A TOCTOU (Time-of-Check Time-of-Use) vulnerability in GNU tar's incremental dumpdir 'X' rename handling allows a local attacker with write access to a directory being backed up to influence the restore process if the attacker has access to the system where the restore is being performed. During restoration, files or directories may be created, renamed or overwritten outside the intended extraction directory. This could lead to unauthorized file modification or, in some cases, privilege escalation. Exploitation does not require the attacker to modify or craft the archive, and standard backup and restore workflows—including extracting into a newly created directory without using the -P option do not mitigate the issue.
🎖@cveNotify
A TOCTOU (Time-of-Check Time-of-Use) vulnerability in GNU tar's incremental dumpdir 'X' rename handling allows a local attacker with write access to a directory being backed up to influence the restore process if the attacker has access to the system where the restore is being performed. During restoration, files or directories may be created, renamed or overwritten outside the intended extraction directory. This could lead to unauthorized file modification or, in some cases, privilege escalation. Exploitation does not require the attacker to modify or craft the archive, and standard backup and restore workflows—including extracting into a newly created directory without using the -P option do not mitigate the issue.
🎖@cveNotify
🚨 CVE-2026-66257
A pre-authentication attacker could leverage unbounded symbol value caching to cause resource exhaustion leading to denial of service.
This issue affects Apache Qpid Proton-J: through 0.34.1.
Users are recommended to upgrade to version 0.35.0, which fixes the issue.
🎖@cveNotify
A pre-authentication attacker could leverage unbounded symbol value caching to cause resource exhaustion leading to denial of service.
This issue affects Apache Qpid Proton-J: through 0.34.1.
Users are recommended to upgrade to version 0.35.0, which fixes the issue.
🎖@cveNotify
🚨 CVE-2026-66273
A pre-authentication attacker could leverage type size/count handling to cause excessive allocation leading to potential denial of service.
This issue affects Apache Qpid Proton-J: through 0.34.1.
Users are recommended to upgrade to version 0.35.0, which fixes the issue.
🎖@cveNotify
A pre-authentication attacker could leverage type size/count handling to cause excessive allocation leading to potential denial of service.
This issue affects Apache Qpid Proton-J: through 0.34.1.
Users are recommended to upgrade to version 0.35.0, which fixes the issue.
🎖@cveNotify
🚨 CVE-2026-67465
A pre-authentication attacker could leverage unbounded symbol value caching to cause resource exhaustion leading to denial of service.
This issue affects Apache Qpid Proton-Dotnet: through 1.0.0.
Users are recommended to upgrade to version 1.1.0, which fixes the issue.
🎖@cveNotify
A pre-authentication attacker could leverage unbounded symbol value caching to cause resource exhaustion leading to denial of service.
This issue affects Apache Qpid Proton-Dotnet: through 1.0.0.
Users are recommended to upgrade to version 1.1.0, which fixes the issue.
🎖@cveNotify
🚨 CVE-2026-67551
pre-authentication attacker could leverage type size/count handling to cause excessive allocation leading to potential denial of service.
This issue affects Apache Qpid Proton-Dotnet: through 1.0.0.
Users are recommended to upgrade to version 1.1.0, which fixes the issue.
🎖@cveNotify
pre-authentication attacker could leverage type size/count handling to cause excessive allocation leading to potential denial of service.
This issue affects Apache Qpid Proton-Dotnet: through 1.0.0.
Users are recommended to upgrade to version 1.1.0, which fixes the issue.
🎖@cveNotify
🚨 CVE-2026-67588
A pre-authentication attacker could leverage unbounded symbol value caching to cause resource exhaustion leading to denial of service.
This issue affects Apache Qpid ProtonJ2: through 1.1.0.
Users are recommended to upgrade to version 1.2.0, which fixes the issue.
🎖@cveNotify
A pre-authentication attacker could leverage unbounded symbol value caching to cause resource exhaustion leading to denial of service.
This issue affects Apache Qpid ProtonJ2: through 1.1.0.
Users are recommended to upgrade to version 1.2.0, which fixes the issue.
🎖@cveNotify
🚨 CVE-2026-67589
A pre-authentication attacker could leverage type size/count handling to cause excessive allocation leading to potential denial of service.
This issue affects Apache Qpid ProtonJ2: through 1.1.0.
Users are recommended to upgrade to version 1.2.0, which fixes the issue.
🎖@cveNotify
A pre-authentication attacker could leverage type size/count handling to cause excessive allocation leading to potential denial of service.
This issue affects Apache Qpid ProtonJ2: through 1.1.0.
Users are recommended to upgrade to version 1.2.0, which fixes the issue.
🎖@cveNotify
🚨 CVE-2026-68060
A pre-authentication attacker could leverage type size/count handling to cause excessive allocation leading to potential denial of service.
This issue affects Apache Qpid Broker-J: through 10.0.1.
Users are recommended to upgrade to version 10.1.0, which fixes the issue.
🎖@cveNotify
A pre-authentication attacker could leverage type size/count handling to cause excessive allocation leading to potential denial of service.
This issue affects Apache Qpid Broker-J: through 10.0.1.
Users are recommended to upgrade to version 10.1.0, which fixes the issue.
🎖@cveNotify
🚨 CVE-2026-68074
A pre-authentication attacker could leverage unbounded symbol value caching to cause resource exhaustion leading to denial of service.
This issue affects Apache Qpid Broker-J: through 10.0.1.
Users are recommended to upgrade to version 10.1.0, which fixes the issue.
🎖@cveNotify
A pre-authentication attacker could leverage unbounded symbol value caching to cause resource exhaustion leading to denial of service.
This issue affects Apache Qpid Broker-J: through 10.0.1.
Users are recommended to upgrade to version 10.1.0, which fixes the issue.
🎖@cveNotify