🚨 CVE-2026-3087
If `shutil.unpack_archive()` is given a ZIP archive with an absolute Windows path containing a drive (`C:\\...`) then the archive will be extracted outside the target directory which is different than other operating systems. Only Windows is affected by this vulnerability.

🎖@cveNotify

🚨 CVE-2026-3276
unicodedata.normalize() can take excessive CPU time when processing
specially crafted Unicode input containing long runs of combining characters
with alternating Canonical Combining Class values.
This affects all normalization forms.

🎖@cveNotify

🚨 CVE-2026-9669
bz2.BZ2Decompressor objects could be reused after a decompression error. If an application caught the resulting OSError and retried with the same decompressor, crafted input could cause the decompressor to resume from an invalid internal state and perform out-of-bounds writes to a stack buffer. This could crash the process when processing untrusted data.

🎖@cveNotify

🚨 CVE-2026-12003
To allow builds of Python to be run from an in-tree layout (rather than
an installed file layout), the VPATH variable is defined at build time
and used to locate certain landmarks - specifically,
Modules/setup.local. When this landmark is found relative to VPATH
relative to the executable, Python assumes it is running in a source
tree and generates a different default sys.path. This code remains in
release builds, so that release-ready builds can be built in-tree.

On Windows, since builds are written to 'PCbuild/', the value of
VPATH is set to '..\..', which results in a landmark of
'..\..\Modules\setup.local'. This path is outside the install directory
of Python, and may have different permissions, potentially allowing a
low-privilege user to create the landmark and an alternative `Lib`
folder that will be discovered by an otherwise restricted install.

Such a setup occurs with the legacy default install location for all
users (in the now superseded EXE installer), due to how Windows allows
all users to create folders in the root directory of their OS drive.

Our recommended mitigation on Windows is to migrate away from the
legacy installer and use the new [Python install
manager](https://www.python.org/downloads/latest/pymanager/) to install
for the current user. Installs where the directory two levels above the
Python installation directory have equivalent permissions are unaffected
(in general, a per-user install cannot be modified at all by other
users, removing any escalation of privilege risk, and could be directly
modified by a privileged user, making the potential tampering
irrelevant). Alternative mitigations might include preemptively creating
and restricting access to a `Modules` directory. Be aware that only 3.13
and 3.14 will receive updated legacy installers - earlier fixes are only
provided as sources.

Platforms other than Windows allow VPATH to be overridden, but as they
don't usually use a separated directory in the build for binaries, are
unlikely to have a landmark reference outside of the install directory.

The landmark detection involving VPATH is a fallback for when a more
specific landmark - .\pybuilddir.txt - is absent, and was included for
compatibility. Future releases of Python will no longer include the
fallback, and so builds will need to generate or preserve the
pybuilddir.txt file in order to work in-tree. This landmark file has
been generated on Windows since 3.11, and on other platforms for longer.

🎖@cveNotify

🚨 CVE-2026-11940
tarfile.extractall() with the 'data' or 'tar'
filter could be bypassed by a crafted archive where a hardlink
references a symlink stored at a deeper name than the hardlink itself. 
The extraction fallback validated the symlink at it's archived location
but recreated it at the hardlink's shallower
path, letting a relative
target the filter judged contained escape the destination directory. 
This allowed a malicious tar archive to create a symlink pointing
outside the destination, enabling out-of-destination file reads or
writes. This was an incomplete fix of CVE-2025-4330.

🎖@cveNotify

🚨 CVE-2026-0864
When using the "configparser" module to write configuration files
containing multi-line text values with carriage return characters (\r) the
resulting file could be injected with unexpected keys and values if the
attacker controls the written value.

🎖@cveNotify

🚨 CVE-2026-11972
When using the "tarfile" module with a file opened in "streaming mode" (mode="r|") the tarfile module did not properly handle EOF, making archive parsing take exponentially longer.

🎖@cveNotify

🚨 CVE-2026-4360
In the Tarfile.extract() function, the filter parameter is not passed properly when extracting hardlinks. An affected system that extracts content from untrusted tar files could end up writing files with an unexpected uid/gid despite the user passing filter='data' to the extract() function.

🎖@cveNotify

🚨 CVE-2026-15308
The incremental HTML parser (html.parser.HTMLParser) allows for CPU
denial-of-service through repeated unterminated markup declarations when
processing uncontrolled data.

🎖@cveNotify

🚨 CVE-2026-6879
`Element.findall()` and fully-consumed `Element.iterfind()` exhibit `O(n^2)` time complexity when using XPath index predicates (e.g. `[1]`, `[last()]`, `[last()-N]`) on XML documents with many same-tag siblings. `Element.find()` is only affected when the first match is near the end  of the sibling list, such as with `[last()]` or `[last()-N]`;  `.//item[1]` short-circuits after the first match.

🎖@cveNotify

🚨 CVE-2026-18856
A vulnerability was determined in Poesis Rhymix CMS up to 2.1.33. This impacts the function procImporterAdminCheckXmlFile of the file modules/importer/importer.admin.controller.php of the component Data Import Module. This manipulation of the argument filename causes server-side request forgery. The attack is possible to be carried out remotely. The exploit has been publicly disclosed and may be utilized. Upgrading to version 2.1.34 will fix this issue. It is recommended to upgrade the affected component.

🎖@cveNotify

🚨 CVE-2026-18859
A vulnerability was identified in ESAFENET CDG up to 20260615. Affected is an unknown function of the file /CDGServer3/ukey/usbkey;logindojojs. Such manipulation of the argument keyid leads to sql injection. The attack may be performed from remote. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

🎖@cveNotify

🚨 CVE-2026-68494
The fix released in jackson-core 2.18.6 and 2.21.1 for CVE-2026-18401 (GHSA-72hv-8253-57qq, number length constraint bypass in the non-blocking parser) is incomplete. This record covers the remaining bypass.

The earlier fix wired validateIntegerLength() into a new _setIntLength() helper and invoked it wherever the integer portion of a number is decided: a terminator byte arrives, a '.' or 'e'/'E' is seen, or input ends inside a fully buffered value. It was not invoked on the attacker-relevant path where the parser runs out of input while still inside the MINOR_NUMBER_INTEGER_DIGITS minor state and returns NOT_AVAILABLE to the caller.

As a result, an attacker who streams JSON to a non-blocking parser in many small chunks, without ever sending a terminator byte, keeps the parser inside MINOR_NUMBER_INTEGER_DIGITS indefinitely. _textBuffer.expandCurrentSegment() grows the accumulator on every chunk while validateIntegerLength() is never called. The accumulator is bounded only by maxStringLength (20 MiB by default) rather than by maxNumberLength (1000 by default), an amplification of roughly 20,000x over the documented limit. Because Java char values occupy two bytes, a single connection can be driven to approximately 40 MiB of heap before the validator finally fires when the value completes.

The equivalent fraction-path code is correct: _finishFloatFraction() calls _setFractLength() before its NOT_AVAILABLE return. The missing call affects the integer-digit paths in _startPositiveNumber(), _startNegativeNumber() and _finishNumberIntegralPart() in NonBlockingUtf8JsonParserBase.

Impact: reactive frameworks such as Spring WebFlux/Reactor, Quarkus, Helidon and Vert.x feed inbound HTTP or gRPC bytes to the async parser as they arrive, which is precisely the chunked-feed shape required. Operators who set StreamReadConstraints.maxNumberLength expecting it to cap memory per number value do not get that guarantee; memory accumulates per concurrent connection and attacker-controlled concurrency can exhaust the JVM heap. The synchronous parsers (UTF8StreamJsonParser, ReaderBasedJsonParser) and the async parser operating on complete input are not affected.

Exploitation requires only the ability to stream data to a parsing endpoint; no privileges or user interaction are needed.

This issue affects com.fasterxml.jackson.core:jackson-core from version 2.15.0 through 2.18.7, and from 2.19.0 through 2.21.3, and tools.jackson.core:jackson-core from 3.0.0 through 3.1.3. Versions prior to 2.15.0 are not affected, because StreamReadConstraints -- which defines the maxNumberLength setting -- was first introduced in jackson-core 2.15.0, so no such constraint exists to be bypassed in earlier releases. Note that GHSA-r7wm-3cxj-wff9 states the affected 2.x range without a lower bound. The 2.22.x and 3.2.x release lines are not affected: those branches were created after the fix commit landed on 2026-05-21 and therefore contain it from their initial releases (2.22.0, tagged 2026-06-03, and 3.2.0, tagged 2026-06-08).

🎖@cveNotify

🚨 CVE-2026-18895
A vulnerability was found in UTT HiPER 1250GW up to 3.2.7-210907-180535. Impacted is the function strcpy of the file /goform/APSecurity_5g. Performing a manipulation of the argument cipher results in stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

🎖@cveNotify

🚨 CVE-2026-18896
A vulnerability was determined in lavkush-maurya Student-Registration-System 1.0. The affected element is an unknown function of the file /student/changepass.php. Executing a manipulation of the argument oldpass can lead to sql injection. It is possible to launch the attack remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

🎖@cveNotify

🚨 CVE-2026-18897
A vulnerability was identified in UTT HiPER 1250GW up to v3.2.7-210907-180535. The impacted element is the function strcpy of the file /goform/getOneApConfTempEntry. The manipulation of the argument tempName leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

🎖@cveNotify

🚨 CVE-2026-18907
Path Traversal in Download File Feature in com.talpa.hibrowser 2.23.1.1 on Android allows arbitrary file write via directory traversal sequences in the filename.

🎖@cveNotify

🚨 CVE-2026-18898
A security flaw has been discovered in UTT HiPER 1200GW up to v2.5.3-170306. This affects the function strcpy of the file /goform/ConfigAdvideo. The manipulation of the argument timestart results in stack-based buffer overflow. The attack can be launched remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

🎖@cveNotify

🚨 CVE-2023-23376
Windows Common Log File System Driver Elevation of Privilege Vulnerability

🎖@cveNotify

🚨 CVE-2023-28461
Array Networks Array AG Series and vxAG (9.4.0.481 and earlier) allow remote code execution. An attacker can browse the filesystem on the SSL VPN gateway using a flags attribute in an HTTP header without authentication. The product could then be exploited through a vulnerable URL. The 2023-03-09 vendor advisory stated "a new Array AG release with the fix will be available soon."

🎖@cveNotify

🚨 CVE-2023-3519
Unauthenticated remote code execution

🎖@cveNotify