🚨 CVE-2026-10050
In Eclipse Jetty, the Digest authentication server-side component uses ISO-8859-1 to encode the password as bytes.



This was done because the initial specification for HTTP did not specify explicitly a charset, and it was assumed to be ISO-8859-1 for historical reasons.



If the password contains characters that cannot be represented in ISO-8859-1, they are silently replaced by `?`. This happens with passwords that contain Chinese, Cyrillic or Greek characters, for example: `αβ123` converts to `??123`.



An attacker can send a request with a digest `Authorization` header crafted with a password made of only `?` characters; the server would match any password of the same length that contains non-ISO-8859-1 characters.



Recent HTTP Digest [RFC-7616](https://datatracker.ietf.org/doc/html/rfc7616) supports a `charset` parameters that defaults to UTF-8 that allows for correct encoding/decoding of passwords.

🎖@cveNotify

🚨 CVE-2026-66883
Improper Handling of Case Sensitivity vulnerability in Erlang Ecosystem Foundation oidcc_plug (Oidcc.Plug.Authorize module) renders the user agent session binding inert, removing a defense in depth control against replay of a stolen session.

This vulnerability is associated with program files lib/oidcc/plug/authorize.ex and lib/oidcc/plug/authorization_callback.ex, and program routines Oidcc.Plug.Authorize.call/2 and Oidcc.Plug.AuthorizationCallback.call/2.

Oidcc.Plug.Authorize.call/2 reads the initiating client's user agent with get_req_header(conn, "User-Agent"). Plug lowercases incoming header names, but get_req_header/2 matches the supplied key exactly and performs no normalization of its own, so the mixed-case lookup always returns an empty list and nil is written into the session. On the callback side, Oidcc.Plug.AuthorizationCallback treats a stored nil user agent as nothing to compare and returns :ok without inspecting the request. The two behaviours combine so that the check passes unconditionally on every request, including for deployments that explicitly opted in with check_useragent: true, and an authorization callback can be completed from a different user agent than the one that initiated the flow without detection. The check fails open silently, with no error and no log entry, so a deployment cannot tell the binding is absent.

The impact is limited to defense in depth. The inert check does not by itself allow an attacker to complete an authorization flow; it removes one layer that would otherwise hinder use of a stolen or leaked session, such as an exfiltrated session cookie replayed from a different client. The CSRF/state, nonce, and PKCE checks are unaffected and continue to function. Deployments that never enabled check_useragent are not affected in practice, since they never expected the binding. The corresponding lookup in Oidcc.Plug.AuthorizationCallback correctly uses the lowercase key and is not affected.

This issue affects oidcc_plug: from 0.1.0-alpha.3 before 0.5.0.

🎖@cveNotify

🚨 CVE-2026-66884
Cross-Site Request Forgery vulnerability in Erlang Ecosystem Foundation oidcc_plug (Oidcc.Plug.AuthorizationCallback module) allows an attacker to make a victim's browser complete an authorization flow the victim never initiated.

This vulnerability is associated with program file lib/oidcc/plug/authorization_callback.ex and program routine Oidcc.Plug.AuthorizationCallback.call/2.

A callback request that carries no Oidcc.Plug.Authorize session is processed with every security check disabled rather than being rejected. call/2 substitutes permissive defaults for the absent session, and each downstream check treats its value as nothing to compare and returns :ok, so the nonce, state, PKCE, peer IP and user agent checks are all skipped. A separate clause of check_state/2 also accepts a state-less request when a verifier is present.

An attacker obtains an authorization code for their own provider account, then induces the victim to visit the callback endpoint with that code and no state parameter. The application signs the victim in as the attacker, so the victim's subsequent actions occur in the attacker's account where the attacker can read them. Applications reusing one callback for both signing in and linking a provider account are further exposed to account takeover, the attacker's account becoming linked to the victim's.

The permissive fallback serves no conforming flow. Third-party-initiated login reaches a relying party at a separate login initiation endpoint and causes it to send a fresh authentication request, and this library implements no such endpoint. Oidcc.Plug.Authorize always sends a state parameter, which an authorization server must echo, so no legitimate callback lacks one.

This issue affects oidcc_plug: from 0.2.0-beta.1 before 0.5.0.

🎖@cveNotify

🚨 CVE-2026-10710
A maliciously crafted FBX file, when parsed through Autodesk FBX SDK, can trigger a stack-based buffer overflow vulnerability in fbxsdk::ExtractDrive. A malicious actor can leverage this vulnerability to execute arbitrary code in the context of the current process.

🎖@cveNotify

🚨 CVE-2026-18806
External control of file name or path vulnerability in TÜBİTAK BİLGEM Software Technologies Research Institute pardus-image-writer allows Removing Important Client Functionality.

This issue affects pardus-image-writer: before 1.0.4.

🎖@cveNotify

🚨 CVE-2026-18809
Information disclosure in Firefox for Android and Firefox Focus for Android. This vulnerability was fixed in Firefox 153.0.3.

🎖@cveNotify

🚨 CVE-2026-58080
In Eclipse Milo versions 1.0.0 through 1.1.4, `OpcUaServerConfig.copy()` fails to preserve a configured `RoleMapper`. On servers that rely on role permissions and construct the running configuration through `copy()`, sessions receive no role IDs and the default access controller skips role-permission checks, allowing an anonymous client where anonymous sessions are permitted to read role-permission metadata, invoke protected methods, or delete protected nodes.

🎖@cveNotify

🚨 CVE-2026-60007
In Eclipse Milo versions 0.6.0 through 1.1.4, username-token processing returns distinguishable errors for invalid RSA PKCS#1 v1.5 padding and other authentication failures, allowing an on-path attacker who captures a victim's `Basic128Rsa15`-encrypted username token to use repeated unauthenticated `ActivateSession` requests as a padding oracle, recover the victim's password, and authenticate with the recovered credentials.

🎖@cveNotify

🚨 CVE-2026-61387
In Eclipse Milo versions 1.0.0 through 1.1.4, monitored-item quota accounting is not exception-safe: if item creation fails with an unchecked error, the server-global reservation is not restored. Deeply nested PubSub ExtensionObjects in a `CreateMonitoredItems` event filter can trigger a `StackOverflowError` during decoding, allowing an unauthenticated remote client to exhaust a finite global monitored-item quota and prevent all clients from creating new monitored items until restart. Existing monitored items and other server functions remain unaffected.

🎖@cveNotify

🚨 CVE-2026-62927
In Eclipse Milo versions 1.0.0 through 1.1.4, the Call service dispatches the original mixed batch to address-space handlers after calculating authorization, allowing an anonymous or otherwise low-privileged client to execute a denied method by batching it with an allowed method.

🎖@cveNotify

🚨 CVE-2026-63248
In Eclipse Milo versions 0.6.0 through 1.1.4, OPC UA server diagnostics nodes do not enforce access authorization. An anonymous client can enable diagnostics over a None/None endpoint without a certificate; with a trusted client application certificate over SignAndEncrypt, it can read security diagnostics for other active sessions, exposing usernames, login history, authentication mechanisms, security modes and policies, and public client certificates.

🎖@cveNotify

🚨 CVE-2026-63252
In Eclipse Milo versions 0.6.0 through 1.1.4, UASC server transport handlers fail to release retained partial message chunks when a channel disconnects, allowing a remote unauthenticated client to exhaust pooled direct memory by repeatedly sending incomplete chunks and disconnecting, potentially terminating the server.

🎖@cveNotify

🚨 CVE-2026-70369
Koha's reports/acquisitions_stats.pl builds its per-cell statistics query in sub calculate by interpolating the user-controlled Filter request parameters directly into WHERE fragments covering aqbasket.closedate, aqorders.datereceived, aqbooksellers.name, items.homebranch, items.ccode, biblioitems.itemtype, aqbudgets.budget_code, aqorders.sort1, and aqorders.sort2. The statement is prepared and executed with no bound parameters. An authenticated staff user holding the reports module permission can inject arbitrary SQL and read any table reachable by the Koha database user, including borrowers (password hashes, two-factor secrets, personal data), borrower_password_recovery, api_keys, and sessions.

🎖@cveNotify

🚨 CVE-2026-70370
Koha's reports/catalogue_stats.pl builds dynamic SQL in sub calculate by interpolating the user-controlled Line and Column request parameters directly into identifier positions of the query (SELECT DISTINCTROW, GROUP BY, ORDER BY) with no whitelist validation. When Line contains itemcallnumber and the cotedigits parameter is truthy, cotedigits is additionally concatenated raw as the numeric argument of a LEFT() call. An authenticated staff user holding the reports module permission can inject arbitrary SQL and read any table reachable by the Koha database user, including borrowers (password hashes, two-factor secrets, personal data), api_keys, and sessions.

🎖@cveNotify

🚨 CVE-2026-70371
Koha's reports/issues_avg_stats.pl builds dynamic SQL in sub calculate by concatenating several user-controlled request parameters directly into the query string. The Line and Column parameters are not validated against any whitelist and land verbatim in identifier positions (SELECT DISTINCTROW, GROUP BY, ORDER BY), and each Filter slot is concatenated raw into single-quoted LIKE, BETWEEN, and comparison fragments with no bound parameters. An authenticated staff user holding the reports module permission can inject arbitrary SQL and read any table reachable by the Koha database user, including borrowers (password hashes, two-factor secrets, personal data), api_keys, and sessions.

🎖@cveNotify

🚨 CVE-2026-70372
Koha's reports/bor_issues_top.pl builds dynamic SQL in sub calculate by concatenating several user-controlled request parameters directly into the query string. The Criteria parameter is only normalized by a table-name prefix and is never whitelisted, landing verbatim in identifier positions (SELECT DISTINCTROW, GROUP BY, ORDER BY); Filter values are concatenated raw into single-quoted LIKE, BETWEEN, and comparison fragments, and the Limit parameter is appended raw to a LIMIT clause. An authenticated staff user holding the reports module permission can inject arbitrary SQL and read any table reachable by the Koha database user, including borrowers (password hashes, two-factor secrets, personal data), api_keys, and sessions.

🎖@cveNotify

🚨 CVE-2026-70373
Koha's reports/issues_stats.pl (the circulation statistics report) builds its calculation query in sub calculate by concatenating several user-controlled request parameters directly into the SQL string. The PeriodTypeSel, PeriodDaySel, and PeriodMonthSel parameters are interpolated raw into single-quoted equality and function-comparison fragments, and the Filter slots plus the Line and Column identifiers are likewise interpolated with no whitelist and no placeholder binding. An authenticated staff user holding the reports module permission can inject arbitrary SQL and read any table reachable by the Koha database user, including borrowers (password hashes, two-factor secrets, personal data), api_keys, and sessions.

🎖@cveNotify

🚨 CVE-2026-66011
ImageMagick before 7.1.2-27 contains a memory leak vulnerability in the magick command-line interface when invalid options are provided. Attackers can trigger memory exhaustion by repeatedly supplying malformed command-line arguments to consume system resources.

🎖@cveNotify

🚨 CVE-2026-14529
IBM WebSphere Application Server 9.0, and 8.5 and IBM WebSphere Application Server - Liberty 17.0.0.3 through 26.0.0.8 traditional is vulnerable to server-side request forgery (SSRF) when the SIP container feature (sipServlet-1.1) is enabled.

🎖@cveNotify

🚨 CVE-2026-2482
IBM WebSphere Application Server - Liberty 17.0.0.3 through 26.0.0.8 is vulnerable to cross-site request forgery which could allow an attacker to execute malicious and unauthorized actions transmitted from a user that the website trusts.

🎖@cveNotify

🚨 CVE-2026-16728
undici's retry interceptor can deliver a response whose body length does not match the Content-Length header exposed to the application after a retry or resume of a partial response. In undici before 6.28.0, from 7.0.0 up to before 7.29.0, and from 8.0.0 up to before 8.9.0, a malicious or faulty upstream can return a partial response with a mismatched framing header, close the socket early, and have the retry interceptor assemble a body of a different length while the original Content-Length stays attached. Applications that use the retry interceptor and forward upstream headers and bodies downstream, such as proxies or gateways, may then emit an invalid HTTP response with a stale Content-Length, leading to downstream response desynchronization, connection hangs, or response corruption. Exploitation requires the retry interceptor enabled, an upstream returning a mismatched partial response, and a downstream forwarder that does not remove or recalculate Content-Length. The issue is fixed in undici 6.28.0, 7.29.0, and 8.9.0.

🎖@cveNotify