🚨 CVE-2024-41048
In the Linux kernel, the following vulnerability has been resolved:
skmsg: Skip zero length skb in sk_msg_recvmsg
When running BPF selftests (./test_progs -t sockmap_basic) on a Loongarch
platform, the following kernel panic occurs:
[...]
Oops[#1]:
CPU: 22 PID: 2824 Comm: test_progs Tainted: G OE 6.10.0-rc2+ #18
Hardware name: LOONGSON Dabieshan/Loongson-TC542F0, BIOS Loongson-UDK2018
... ...
ra: 90000000048bf6c0 sk_msg_recvmsg+0x120/0x560
ERA: 9000000004162774 copy_page_to_iter+0x74/0x1c0
CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
PRMD: 0000000c (PPLV0 +PIE +PWE)
EUEN: 00000007 (+FPE +SXE +ASXE -BTE)
ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7)
ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0)
BADV: 0000000000000040
PRID: 0014c011 (Loongson-64bit, Loongson-3C5000)
Modules linked in: bpf_testmod(OE) xt_CHECKSUM xt_MASQUERADE xt_conntrack
Process test_progs (pid: 2824, threadinfo=0000000000863a31, task=...)
Stack : ...
Call Trace:
[<9000000004162774>] copy_page_to_iter+0x74/0x1c0
[<90000000048bf6c0>] sk_msg_recvmsg+0x120/0x560
[<90000000049f2b90>] tcp_bpf_recvmsg_parser+0x170/0x4e0
[<90000000049aae34>] inet_recvmsg+0x54/0x100
[<900000000481ad5c>] sock_recvmsg+0x7c/0xe0
[<900000000481e1a8>] __sys_recvfrom+0x108/0x1c0
[<900000000481e27c>] sys_recvfrom+0x1c/0x40
[<9000000004c076ec>] do_syscall+0x8c/0xc0
[<9000000003731da4>] handle_syscall+0xc4/0x160
Code: ...
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Fatal exception
Kernel relocated by 0x3510000
.text @ 0x9000000003710000
.data @ 0x9000000004d70000
.bss @ 0x9000000006469400
---[ end Kernel panic - not syncing: Fatal exception ]---
[...]
This crash happens every time when running sockmap_skb_verdict_shutdown
subtest in sockmap_basic.
This crash is because a NULL pointer is passed to page_address() in the
sk_msg_recvmsg(). Due to the different implementations depending on the
architecture, page_address(NULL) will trigger a panic on Loongarch
platform but not on x86 platform. So this bug was hidden on x86 platform
for a while, but now it is exposed on Loongarch platform. The root cause
is that a zero length skb (skb->len == 0) was put on the queue.
This zero length skb is a TCP FIN packet, which was sent by shutdown(),
invoked in test_sockmap_skb_verdict_shutdown():
shutdown(p1, SHUT_WR);
In this case, in sk_psock_skb_ingress_enqueue(), num_sge is zero, and no
page is put to this sge (see sg_set_page in sg_set_page), but this empty
sge is queued into ingress_msg list.
And in sk_msg_recvmsg(), this empty sge is used, and a NULL page is got by
sg_page(sge). Pass this NULL page to copy_page_to_iter(), which passes it
to kmap_local_page() and to page_address(), then kernel panics.
To solve this, we should skip this zero length skb. So in sk_msg_recvmsg(),
if copy is zero, that means it's a zero length skb, skip invoking
copy_page_to_iter(). We are using the EFAULT return triggered by
copy_page_to_iter to check for is_fin in tcp_bpf.c.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
skmsg: Skip zero length skb in sk_msg_recvmsg
When running BPF selftests (./test_progs -t sockmap_basic) on a Loongarch
platform, the following kernel panic occurs:
[...]
Oops[#1]:
CPU: 22 PID: 2824 Comm: test_progs Tainted: G OE 6.10.0-rc2+ #18
Hardware name: LOONGSON Dabieshan/Loongson-TC542F0, BIOS Loongson-UDK2018
... ...
ra: 90000000048bf6c0 sk_msg_recvmsg+0x120/0x560
ERA: 9000000004162774 copy_page_to_iter+0x74/0x1c0
CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
PRMD: 0000000c (PPLV0 +PIE +PWE)
EUEN: 00000007 (+FPE +SXE +ASXE -BTE)
ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7)
ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0)
BADV: 0000000000000040
PRID: 0014c011 (Loongson-64bit, Loongson-3C5000)
Modules linked in: bpf_testmod(OE) xt_CHECKSUM xt_MASQUERADE xt_conntrack
Process test_progs (pid: 2824, threadinfo=0000000000863a31, task=...)
Stack : ...
Call Trace:
[<9000000004162774>] copy_page_to_iter+0x74/0x1c0
[<90000000048bf6c0>] sk_msg_recvmsg+0x120/0x560
[<90000000049f2b90>] tcp_bpf_recvmsg_parser+0x170/0x4e0
[<90000000049aae34>] inet_recvmsg+0x54/0x100
[<900000000481ad5c>] sock_recvmsg+0x7c/0xe0
[<900000000481e1a8>] __sys_recvfrom+0x108/0x1c0
[<900000000481e27c>] sys_recvfrom+0x1c/0x40
[<9000000004c076ec>] do_syscall+0x8c/0xc0
[<9000000003731da4>] handle_syscall+0xc4/0x160
Code: ...
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Fatal exception
Kernel relocated by 0x3510000
.text @ 0x9000000003710000
.data @ 0x9000000004d70000
.bss @ 0x9000000006469400
---[ end Kernel panic - not syncing: Fatal exception ]---
[...]
This crash happens every time when running sockmap_skb_verdict_shutdown
subtest in sockmap_basic.
This crash is because a NULL pointer is passed to page_address() in the
sk_msg_recvmsg(). Due to the different implementations depending on the
architecture, page_address(NULL) will trigger a panic on Loongarch
platform but not on x86 platform. So this bug was hidden on x86 platform
for a while, but now it is exposed on Loongarch platform. The root cause
is that a zero length skb (skb->len == 0) was put on the queue.
This zero length skb is a TCP FIN packet, which was sent by shutdown(),
invoked in test_sockmap_skb_verdict_shutdown():
shutdown(p1, SHUT_WR);
In this case, in sk_psock_skb_ingress_enqueue(), num_sge is zero, and no
page is put to this sge (see sg_set_page in sg_set_page), but this empty
sge is queued into ingress_msg list.
And in sk_msg_recvmsg(), this empty sge is used, and a NULL page is got by
sg_page(sge). Pass this NULL page to copy_page_to_iter(), which passes it
to kmap_local_page() and to page_address(), then kernel panics.
To solve this, we should skip this zero length skb. So in sk_msg_recvmsg(),
if copy is zero, that means it's a zero length skb, skip invoking
copy_page_to_iter(). We are using the EFAULT return triggered by
copy_page_to_iter to check for is_fin in tcp_bpf.c.
🎖@cveNotify
🚨 CVE-2024-41049
In the Linux kernel, the following vulnerability has been resolved:
filelock: fix potential use-after-free in posix_lock_inode
Light Hsieh reported a KASAN UAF warning in trace_posix_lock_inode().
The request pointer had been changed earlier to point to a lock entry
that was added to the inode's list. However, before the tracepoint could
fire, another task raced in and freed that lock.
Fix this by moving the tracepoint inside the spinlock, which should
ensure that this doesn't happen.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
filelock: fix potential use-after-free in posix_lock_inode
Light Hsieh reported a KASAN UAF warning in trace_posix_lock_inode().
The request pointer had been changed earlier to point to a lock entry
that was added to the inode's list. However, before the tracepoint could
fire, another task raced in and freed that lock.
Fix this by moving the tracepoint inside the spinlock, which should
ensure that this doesn't happen.
🎖@cveNotify
🚨 CVE-2024-41051
In the Linux kernel, the following vulnerability has been resolved:
cachefiles: wait for ondemand_object_worker to finish when dropping object
When queuing ondemand_object_worker() to re-open the object,
cachefiles_object is not pinned. The cachefiles_object may be freed when
the pending read request is completed intentionally and the related
erofs is umounted. If ondemand_object_worker() runs after the object is
freed, it will incur use-after-free problem as shown below.
process A processs B process C process D
cachefiles_ondemand_send_req()
// send a read req X
// wait for its completion
// close ondemand fd
cachefiles_ondemand_fd_release()
// set object as CLOSE
cachefiles_ondemand_daemon_read()
// set object as REOPENING
queue_work(fscache_wq, &info->ondemand_work)
// close /dev/cachefiles
cachefiles_daemon_release
cachefiles_flush_reqs
complete(&req->done)
// read req X is completed
// umount the erofs fs
cachefiles_put_object()
// object will be freed
cachefiles_ondemand_deinit_obj_info()
kmem_cache_free(object)
// both info and object are freed
ondemand_object_worker()
When dropping an object, it is no longer necessary to reopen the object,
so use cancel_work_sync() to cancel or wait for ondemand_object_worker()
to finish.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
cachefiles: wait for ondemand_object_worker to finish when dropping object
When queuing ondemand_object_worker() to re-open the object,
cachefiles_object is not pinned. The cachefiles_object may be freed when
the pending read request is completed intentionally and the related
erofs is umounted. If ondemand_object_worker() runs after the object is
freed, it will incur use-after-free problem as shown below.
process A processs B process C process D
cachefiles_ondemand_send_req()
// send a read req X
// wait for its completion
// close ondemand fd
cachefiles_ondemand_fd_release()
// set object as CLOSE
cachefiles_ondemand_daemon_read()
// set object as REOPENING
queue_work(fscache_wq, &info->ondemand_work)
// close /dev/cachefiles
cachefiles_daemon_release
cachefiles_flush_reqs
complete(&req->done)
// read req X is completed
// umount the erofs fs
cachefiles_put_object()
// object will be freed
cachefiles_ondemand_deinit_obj_info()
kmem_cache_free(object)
// both info and object are freed
ondemand_object_worker()
When dropping an object, it is no longer necessary to reopen the object,
so use cancel_work_sync() to cancel or wait for ondemand_object_worker()
to finish.
🎖@cveNotify
🚨 CVE-2024-41056
In the Linux kernel, the following vulnerability has been resolved:
firmware: cs_dsp: Use strnlen() on name fields in V1 wmfw files
Use strnlen() instead of strlen() on the algorithm and coefficient name
string arrays in V1 wmfw files.
In V1 wmfw files the name is a NUL-terminated string in a fixed-size
array. cs_dsp should protect against overrunning the array if the NUL
terminator is missing.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
firmware: cs_dsp: Use strnlen() on name fields in V1 wmfw files
Use strnlen() instead of strlen() on the algorithm and coefficient name
string arrays in V1 wmfw files.
In V1 wmfw files the name is a NUL-terminated string in a fixed-size
array. cs_dsp should protect against overrunning the array if the NUL
terminator is missing.
🎖@cveNotify
🚨 CVE-2024-41057
In the Linux kernel, the following vulnerability has been resolved:
cachefiles: fix slab-use-after-free in cachefiles_withdraw_cookie()
We got the following issue in our fault injection stress test:
==================================================================
BUG: KASAN: slab-use-after-free in cachefiles_withdraw_cookie+0x4d9/0x600
Read of size 8 at addr ffff888118efc000 by task kworker/u78:0/109
CPU: 13 PID: 109 Comm: kworker/u78:0 Not tainted 6.8.0-dirty #566
Call Trace:
<TASK>
kasan_report+0x93/0xc0
cachefiles_withdraw_cookie+0x4d9/0x600
fscache_cookie_state_machine+0x5c8/0x1230
fscache_cookie_worker+0x91/0x1c0
process_one_work+0x7fa/0x1800
[...]
Allocated by task 117:
kmalloc_trace+0x1b3/0x3c0
cachefiles_acquire_volume+0xf3/0x9c0
fscache_create_volume_work+0x97/0x150
process_one_work+0x7fa/0x1800
[...]
Freed by task 120301:
kfree+0xf1/0x2c0
cachefiles_withdraw_cache+0x3fa/0x920
cachefiles_put_unbind_pincount+0x1f6/0x250
cachefiles_daemon_release+0x13b/0x290
__fput+0x204/0xa00
task_work_run+0x139/0x230
do_exit+0x87a/0x29b0
[...]
==================================================================
Following is the process that triggers the issue:
p1 | p2
------------------------------------------------------------
fscache_begin_lookup
fscache_begin_volume_access
fscache_cache_is_live(fscache_cache)
cachefiles_daemon_release
cachefiles_put_unbind_pincount
cachefiles_daemon_unbind
cachefiles_withdraw_cache
fscache_withdraw_cache
fscache_set_cache_state(cache, FSCACHE_CACHE_IS_WITHDRAWN);
cachefiles_withdraw_objects(cache)
fscache_wait_for_objects(fscache)
atomic_read(&fscache_cache->object_count) == 0
fscache_perform_lookup
cachefiles_lookup_cookie
cachefiles_alloc_object
refcount_set(&object->ref, 1);
object->volume = volume
fscache_count_object(vcookie->cache);
atomic_inc(&fscache_cache->object_count)
cachefiles_withdraw_volumes
cachefiles_withdraw_volume
fscache_withdraw_volume
__cachefiles_free_volume
kfree(cachefiles_volume)
fscache_cookie_state_machine
cachefiles_withdraw_cookie
cache = object->volume->cache;
// cachefiles_volume UAF !!!
After setting FSCACHE_CACHE_IS_WITHDRAWN, wait for all the cookie lookups
to complete first, and then wait for fscache_cache->object_count == 0 to
avoid the cookie exiting after the volume has been freed and triggering
the above issue. Therefore call fscache_withdraw_volume() before calling
cachefiles_withdraw_objects().
This way, after setting FSCACHE_CACHE_IS_WITHDRAWN, only the following two
cases will occur:
1) fscache_begin_lookup fails in fscache_begin_volume_access().
2) fscache_withdraw_volume() will ensure that fscache_count_object() has
been executed before calling fscache_wait_for_objects().
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
cachefiles: fix slab-use-after-free in cachefiles_withdraw_cookie()
We got the following issue in our fault injection stress test:
==================================================================
BUG: KASAN: slab-use-after-free in cachefiles_withdraw_cookie+0x4d9/0x600
Read of size 8 at addr ffff888118efc000 by task kworker/u78:0/109
CPU: 13 PID: 109 Comm: kworker/u78:0 Not tainted 6.8.0-dirty #566
Call Trace:
<TASK>
kasan_report+0x93/0xc0
cachefiles_withdraw_cookie+0x4d9/0x600
fscache_cookie_state_machine+0x5c8/0x1230
fscache_cookie_worker+0x91/0x1c0
process_one_work+0x7fa/0x1800
[...]
Allocated by task 117:
kmalloc_trace+0x1b3/0x3c0
cachefiles_acquire_volume+0xf3/0x9c0
fscache_create_volume_work+0x97/0x150
process_one_work+0x7fa/0x1800
[...]
Freed by task 120301:
kfree+0xf1/0x2c0
cachefiles_withdraw_cache+0x3fa/0x920
cachefiles_put_unbind_pincount+0x1f6/0x250
cachefiles_daemon_release+0x13b/0x290
__fput+0x204/0xa00
task_work_run+0x139/0x230
do_exit+0x87a/0x29b0
[...]
==================================================================
Following is the process that triggers the issue:
p1 | p2
------------------------------------------------------------
fscache_begin_lookup
fscache_begin_volume_access
fscache_cache_is_live(fscache_cache)
cachefiles_daemon_release
cachefiles_put_unbind_pincount
cachefiles_daemon_unbind
cachefiles_withdraw_cache
fscache_withdraw_cache
fscache_set_cache_state(cache, FSCACHE_CACHE_IS_WITHDRAWN);
cachefiles_withdraw_objects(cache)
fscache_wait_for_objects(fscache)
atomic_read(&fscache_cache->object_count) == 0
fscache_perform_lookup
cachefiles_lookup_cookie
cachefiles_alloc_object
refcount_set(&object->ref, 1);
object->volume = volume
fscache_count_object(vcookie->cache);
atomic_inc(&fscache_cache->object_count)
cachefiles_withdraw_volumes
cachefiles_withdraw_volume
fscache_withdraw_volume
__cachefiles_free_volume
kfree(cachefiles_volume)
fscache_cookie_state_machine
cachefiles_withdraw_cookie
cache = object->volume->cache;
// cachefiles_volume UAF !!!
After setting FSCACHE_CACHE_IS_WITHDRAWN, wait for all the cookie lookups
to complete first, and then wait for fscache_cache->object_count == 0 to
avoid the cookie exiting after the volume has been freed and triggering
the above issue. Therefore call fscache_withdraw_volume() before calling
cachefiles_withdraw_objects().
This way, after setting FSCACHE_CACHE_IS_WITHDRAWN, only the following two
cases will occur:
1) fscache_begin_lookup fails in fscache_begin_volume_access().
2) fscache_withdraw_volume() will ensure that fscache_count_object() has
been executed before calling fscache_wait_for_objects().
🎖@cveNotify
🚨 CVE-2024-41059
In the Linux kernel, the following vulnerability has been resolved:
hfsplus: fix uninit-value in copy_name
[syzbot reported]
BUG: KMSAN: uninit-value in sized_strscpy+0xc4/0x160
sized_strscpy+0xc4/0x160
copy_name+0x2af/0x320 fs/hfsplus/xattr.c:411
hfsplus_listxattr+0x11e9/0x1a50 fs/hfsplus/xattr.c:750
vfs_listxattr fs/xattr.c:493 [inline]
listxattr+0x1f3/0x6b0 fs/xattr.c:840
path_listxattr fs/xattr.c:864 [inline]
__do_sys_listxattr fs/xattr.c:876 [inline]
__se_sys_listxattr fs/xattr.c:873 [inline]
__x64_sys_listxattr+0x16b/0x2f0 fs/xattr.c:873
x64_sys_call+0x2ba0/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:195
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Uninit was created at:
slab_post_alloc_hook mm/slub.c:3877 [inline]
slab_alloc_node mm/slub.c:3918 [inline]
kmalloc_trace+0x57b/0xbe0 mm/slub.c:4065
kmalloc include/linux/slab.h:628 [inline]
hfsplus_listxattr+0x4cc/0x1a50 fs/hfsplus/xattr.c:699
vfs_listxattr fs/xattr.c:493 [inline]
listxattr+0x1f3/0x6b0 fs/xattr.c:840
path_listxattr fs/xattr.c:864 [inline]
__do_sys_listxattr fs/xattr.c:876 [inline]
__se_sys_listxattr fs/xattr.c:873 [inline]
__x64_sys_listxattr+0x16b/0x2f0 fs/xattr.c:873
x64_sys_call+0x2ba0/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:195
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
[Fix]
When allocating memory to strbuf, initialize memory to 0.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
hfsplus: fix uninit-value in copy_name
[syzbot reported]
BUG: KMSAN: uninit-value in sized_strscpy+0xc4/0x160
sized_strscpy+0xc4/0x160
copy_name+0x2af/0x320 fs/hfsplus/xattr.c:411
hfsplus_listxattr+0x11e9/0x1a50 fs/hfsplus/xattr.c:750
vfs_listxattr fs/xattr.c:493 [inline]
listxattr+0x1f3/0x6b0 fs/xattr.c:840
path_listxattr fs/xattr.c:864 [inline]
__do_sys_listxattr fs/xattr.c:876 [inline]
__se_sys_listxattr fs/xattr.c:873 [inline]
__x64_sys_listxattr+0x16b/0x2f0 fs/xattr.c:873
x64_sys_call+0x2ba0/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:195
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Uninit was created at:
slab_post_alloc_hook mm/slub.c:3877 [inline]
slab_alloc_node mm/slub.c:3918 [inline]
kmalloc_trace+0x57b/0xbe0 mm/slub.c:4065
kmalloc include/linux/slab.h:628 [inline]
hfsplus_listxattr+0x4cc/0x1a50 fs/hfsplus/xattr.c:699
vfs_listxattr fs/xattr.c:493 [inline]
listxattr+0x1f3/0x6b0 fs/xattr.c:840
path_listxattr fs/xattr.c:864 [inline]
__do_sys_listxattr fs/xattr.c:876 [inline]
__se_sys_listxattr fs/xattr.c:873 [inline]
__x64_sys_listxattr+0x16b/0x2f0 fs/xattr.c:873
x64_sys_call+0x2ba0/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:195
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
[Fix]
When allocating memory to strbuf, initialize memory to 0.
🎖@cveNotify
🚨 CVE-2024-41060
In the Linux kernel, the following vulnerability has been resolved:
drm/radeon: check bo_va->bo is non-NULL before using it
The call to radeon_vm_clear_freed might clear bo_va->bo, so
we have to check it before dereferencing it.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
drm/radeon: check bo_va->bo is non-NULL before using it
The call to radeon_vm_clear_freed might clear bo_va->bo, so
we have to check it before dereferencing it.
🎖@cveNotify
🚨 CVE-2024-41062
In the Linux kernel, the following vulnerability has been resolved:
bluetooth/l2cap: sync sock recv cb and release
The problem occurs between the system call to close the sock and hci_rx_work,
where the former releases the sock and the latter accesses it without lock protection.
CPU0 CPU1
---- ----
sock_close hci_rx_work
l2cap_sock_release hci_acldata_packet
l2cap_sock_kill l2cap_recv_frame
sk_free l2cap_conless_channel
l2cap_sock_recv_cb
If hci_rx_work processes the data that needs to be received before the sock is
closed, then everything is normal; Otherwise, the work thread may access the
released sock when receiving data.
Add a chan mutex in the rx callback of the sock to achieve synchronization between
the sock release and recv cb.
Sock is dead, so set chan data to NULL, avoid others use invalid sock pointer.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
bluetooth/l2cap: sync sock recv cb and release
The problem occurs between the system call to close the sock and hci_rx_work,
where the former releases the sock and the latter accesses it without lock protection.
CPU0 CPU1
---- ----
sock_close hci_rx_work
l2cap_sock_release hci_acldata_packet
l2cap_sock_kill l2cap_recv_frame
sk_free l2cap_conless_channel
l2cap_sock_recv_cb
If hci_rx_work processes the data that needs to be received before the sock is
closed, then everything is normal; Otherwise, the work thread may access the
released sock when receiving data.
Add a chan mutex in the rx callback of the sock to achieve synchronization between
the sock release and recv cb.
Sock is dead, so set chan data to NULL, avoid others use invalid sock pointer.
🎖@cveNotify
🚨 CVE-2024-41064
In the Linux kernel, the following vulnerability has been resolved:
powerpc/eeh: avoid possible crash when edev->pdev changes
If a PCI device is removed during eeh_pe_report_edev(), edev->pdev
will change and can cause a crash, hold the PCI rescan/remove lock
while taking a copy of edev->pdev->bus.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
powerpc/eeh: avoid possible crash when edev->pdev changes
If a PCI device is removed during eeh_pe_report_edev(), edev->pdev
will change and can cause a crash, hold the PCI rescan/remove lock
while taking a copy of edev->pdev->bus.
🎖@cveNotify
🚨 CVE-2024-41066
In the Linux kernel, the following vulnerability has been resolved:
ibmvnic: Add tx check to prevent skb leak
Below is a summary of how the driver stores a reference to an skb during
transmit:
tx_buff[free_map[consumer_index]]->skb = new_skb;
free_map[consumer_index] = IBMVNIC_INVALID_MAP;
consumer_index ++;
Where variable data looks like this:
free_map == [4, IBMVNIC_INVALID_MAP, IBMVNIC_INVALID_MAP, 0, 3]
consumer_index^
tx_buff == [skb=null, skb=<ptr>, skb=<ptr>, skb=null, skb=null]
The driver has checks to ensure that free_map[consumer_index] pointed to
a valid index but there was no check to ensure that this index pointed
to an unused/null skb address. So, if, by some chance, our free_map and
tx_buff lists become out of sync then we were previously risking an
skb memory leak. This could then cause tcp congestion control to stop
sending packets, eventually leading to ETIMEDOUT.
Therefore, add a conditional to ensure that the skb address is null. If
not then warn the user (because this is still a bug that should be
patched) and free the old pointer to prevent memleak/tcp problems.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
ibmvnic: Add tx check to prevent skb leak
Below is a summary of how the driver stores a reference to an skb during
transmit:
tx_buff[free_map[consumer_index]]->skb = new_skb;
free_map[consumer_index] = IBMVNIC_INVALID_MAP;
consumer_index ++;
Where variable data looks like this:
free_map == [4, IBMVNIC_INVALID_MAP, IBMVNIC_INVALID_MAP, 0, 3]
consumer_index^
tx_buff == [skb=null, skb=<ptr>, skb=<ptr>, skb=null, skb=null]
The driver has checks to ensure that free_map[consumer_index] pointed to
a valid index but there was no check to ensure that this index pointed
to an unused/null skb address. So, if, by some chance, our free_map and
tx_buff lists become out of sync then we were previously risking an
skb memory leak. This could then cause tcp congestion control to stop
sending packets, eventually leading to ETIMEDOUT.
Therefore, add a conditional to ensure that the skb address is null. If
not then warn the user (because this is still a bug that should be
patched) and free the old pointer to prevent memleak/tcp problems.
🎖@cveNotify
🚨 CVE-2024-41069
In the Linux kernel, the following vulnerability has been resolved:
ASoC: topology: Fix references to freed memory
Most users after parsing a topology file, release memory used by it, so
having pointer references directly into topology file contents is wrong.
Use devm_kmemdup(), to allocate memory as needed.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
ASoC: topology: Fix references to freed memory
Most users after parsing a topology file, release memory used by it, so
having pointer references directly into topology file contents is wrong.
Use devm_kmemdup(), to allocate memory as needed.
🎖@cveNotify
🚨 CVE-2024-41070
In the Linux kernel, the following vulnerability has been resolved:
KVM: PPC: Book3S HV: Prevent UAF in kvm_spapr_tce_attach_iommu_group()
Al reported a possible use-after-free (UAF) in kvm_spapr_tce_attach_iommu_group().
It looks up `stt` from tablefd, but then continues to use it after doing
fdput() on the returned fd. After the fdput() the tablefd is free to be
closed by another thread. The close calls kvm_spapr_tce_release() and
then release_spapr_tce_table() (via call_rcu()) which frees `stt`.
Although there are calls to rcu_read_lock() in
kvm_spapr_tce_attach_iommu_group() they are not sufficient to prevent
the UAF, because `stt` is used outside the locked regions.
With an artifcial delay after the fdput() and a userspace program which
triggers the race, KASAN detects the UAF:
BUG: KASAN: slab-use-after-free in kvm_spapr_tce_attach_iommu_group+0x298/0x720 [kvm]
Read of size 4 at addr c000200027552c30 by task kvm-vfio/2505
CPU: 54 PID: 2505 Comm: kvm-vfio Not tainted 6.10.0-rc3-next-20240612-dirty #1
Hardware name: 8335-GTH POWER9 0x4e1202 opal:skiboot-v6.5.3-35-g1851b2a06 PowerNV
Call Trace:
dump_stack_lvl+0xb4/0x108 (unreliable)
print_report+0x2b4/0x6ec
kasan_report+0x118/0x2b0
__asan_load4+0xb8/0xd0
kvm_spapr_tce_attach_iommu_group+0x298/0x720 [kvm]
kvm_vfio_set_attr+0x524/0xac0 [kvm]
kvm_device_ioctl+0x144/0x240 [kvm]
sys_ioctl+0x62c/0x1810
system_call_exception+0x190/0x440
system_call_vectored_common+0x15c/0x2ec
...
Freed by task 0:
...
kfree+0xec/0x3e0
release_spapr_tce_table+0xd4/0x11c [kvm]
rcu_core+0x568/0x16a0
handle_softirqs+0x23c/0x920
do_softirq_own_stack+0x6c/0x90
do_softirq_own_stack+0x58/0x90
__irq_exit_rcu+0x218/0x2d0
irq_exit+0x30/0x80
arch_local_irq_restore+0x128/0x230
arch_local_irq_enable+0x1c/0x30
cpuidle_enter_state+0x134/0x5cc
cpuidle_enter+0x6c/0xb0
call_cpuidle+0x7c/0x100
do_idle+0x394/0x410
cpu_startup_entry+0x60/0x70
start_secondary+0x3fc/0x410
start_secondary_prolog+0x10/0x14
Fix it by delaying the fdput() until `stt` is no longer in use, which
is effectively the entire function. To keep the patch minimal add a call
to fdput() at each of the existing return paths. Future work can convert
the function to goto or __cleanup style cleanup.
With the fix in place the test case no longer triggers the UAF.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
KVM: PPC: Book3S HV: Prevent UAF in kvm_spapr_tce_attach_iommu_group()
Al reported a possible use-after-free (UAF) in kvm_spapr_tce_attach_iommu_group().
It looks up `stt` from tablefd, but then continues to use it after doing
fdput() on the returned fd. After the fdput() the tablefd is free to be
closed by another thread. The close calls kvm_spapr_tce_release() and
then release_spapr_tce_table() (via call_rcu()) which frees `stt`.
Although there are calls to rcu_read_lock() in
kvm_spapr_tce_attach_iommu_group() they are not sufficient to prevent
the UAF, because `stt` is used outside the locked regions.
With an artifcial delay after the fdput() and a userspace program which
triggers the race, KASAN detects the UAF:
BUG: KASAN: slab-use-after-free in kvm_spapr_tce_attach_iommu_group+0x298/0x720 [kvm]
Read of size 4 at addr c000200027552c30 by task kvm-vfio/2505
CPU: 54 PID: 2505 Comm: kvm-vfio Not tainted 6.10.0-rc3-next-20240612-dirty #1
Hardware name: 8335-GTH POWER9 0x4e1202 opal:skiboot-v6.5.3-35-g1851b2a06 PowerNV
Call Trace:
dump_stack_lvl+0xb4/0x108 (unreliable)
print_report+0x2b4/0x6ec
kasan_report+0x118/0x2b0
__asan_load4+0xb8/0xd0
kvm_spapr_tce_attach_iommu_group+0x298/0x720 [kvm]
kvm_vfio_set_attr+0x524/0xac0 [kvm]
kvm_device_ioctl+0x144/0x240 [kvm]
sys_ioctl+0x62c/0x1810
system_call_exception+0x190/0x440
system_call_vectored_common+0x15c/0x2ec
...
Freed by task 0:
...
kfree+0xec/0x3e0
release_spapr_tce_table+0xd4/0x11c [kvm]
rcu_core+0x568/0x16a0
handle_softirqs+0x23c/0x920
do_softirq_own_stack+0x6c/0x90
do_softirq_own_stack+0x58/0x90
__irq_exit_rcu+0x218/0x2d0
irq_exit+0x30/0x80
arch_local_irq_restore+0x128/0x230
arch_local_irq_enable+0x1c/0x30
cpuidle_enter_state+0x134/0x5cc
cpuidle_enter+0x6c/0xb0
call_cpuidle+0x7c/0x100
do_idle+0x394/0x410
cpu_startup_entry+0x60/0x70
start_secondary+0x3fc/0x410
start_secondary_prolog+0x10/0x14
Fix it by delaying the fdput() until `stt` is no longer in use, which
is effectively the entire function. To keep the patch minimal add a call
to fdput() at each of the existing return paths. Future work can convert
the function to goto or __cleanup style cleanup.
With the fix in place the test case no longer triggers the UAF.
🎖@cveNotify
🚨 CVE-2024-41073
In the Linux kernel, the following vulnerability has been resolved:
nvme: avoid double free special payload
If a discard request needs to be retried, and that retry may fail before
a new special payload is added, a double free will result. Clear the
RQF_SPECIAL_LOAD when the request is cleaned.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
nvme: avoid double free special payload
If a discard request needs to be retried, and that retry may fail before
a new special payload is added, a double free will result. Clear the
RQF_SPECIAL_LOAD when the request is cleaned.
🎖@cveNotify
🚨 CVE-2024-41075
In the Linux kernel, the following vulnerability has been resolved:
cachefiles: add consistency check for copen/cread
This prevents malicious processes from completing random copen/cread
requests and crashing the system. Added checks are listed below:
* Generic, copen can only complete open requests, and cread can only
complete read requests.
* For copen, ondemand_id must not be 0, because this indicates that the
request has not been read by the daemon.
* For cread, the object corresponding to fd and req should be the same.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
cachefiles: add consistency check for copen/cread
This prevents malicious processes from completing random copen/cread
requests and crashing the system. Added checks are listed below:
* Generic, copen can only complete open requests, and cread can only
complete read requests.
* For copen, ondemand_id must not be 0, because this indicates that the
request has not been read by the daemon.
* For cread, the object corresponding to fd and req should be the same.
🎖@cveNotify
🚨 CVE-2024-41079
In the Linux kernel, the following vulnerability has been resolved:
nvmet: always initialize cqe.result
The spec doesn't mandate that the first two double words (aka results)
for the command queue entry need to be set to 0 when they are not
used (not specified). Though, the target implemention returns 0 for TCP
and FC but not for RDMA.
Let's make RDMA behave the same and thus explicitly initializing the
result field. This prevents leaking any data from the stack.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
nvmet: always initialize cqe.result
The spec doesn't mandate that the first two double words (aka results)
for the command queue entry need to be set to 0 when they are not
used (not specified). Though, the target implemention returns 0 for TCP
and FC but not for RDMA.
Let's make RDMA behave the same and thus explicitly initializing the
result field. This prevents leaking any data from the stack.
🎖@cveNotify
🚨 CVE-2024-41081
In the Linux kernel, the following vulnerability has been resolved:
ila: block BH in ila_output()
As explained in commit 1378817486d6 ("tipc: block BH
before using dst_cache"), net/core/dst_cache.c
helpers need to be called with BH disabled.
ila_output() is called from lwtunnel_output()
possibly from process context, and under rcu_read_lock().
We might be interrupted by a softirq, re-enter ila_output()
and corrupt dst_cache data structures.
Fix the race by using local_bh_disable().
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
ila: block BH in ila_output()
As explained in commit 1378817486d6 ("tipc: block BH
before using dst_cache"), net/core/dst_cache.c
helpers need to be called with BH disabled.
ila_output() is called from lwtunnel_output()
possibly from process context, and under rcu_read_lock().
We might be interrupted by a softirq, re-enter ila_output()
and corrupt dst_cache data structures.
Fix the race by using local_bh_disable().
🎖@cveNotify
🚨 CVE-2024-41086
In the Linux kernel, the following vulnerability has been resolved:
bcachefs: Fix sb_field_downgrade validation
- bch2_sb_downgrade_validate() wasn't checking for a downgrade entry
extending past the end of the superblock section
- for_each_downgrade_entry() is used in to_text() and needs to work on
malformed input; it also was missing a check for a field extending
past the end of the section
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
bcachefs: Fix sb_field_downgrade validation
- bch2_sb_downgrade_validate() wasn't checking for a downgrade entry
extending past the end of the superblock section
- for_each_downgrade_entry() is used in to_text() and needs to work on
malformed input; it also was missing a check for a field extending
past the end of the section
🎖@cveNotify
🚨 CVE-2024-41092
In the Linux kernel, the following vulnerability has been resolved:
drm/i915/gt: Fix potential UAF by revoke of fence registers
CI has been sporadically reporting the following issue triggered by
igt@i915_selftest@live@hangcheck on ADL-P and similar machines:
<6> [414.049203] i915: Running intel_hangcheck_live_selftests/igt_reset_evict_fence
...
<6> [414.068804] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled
<6> [414.068812] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled
<3> [414.070354] Unable to pin Y-tiled fence; err:-4
<3> [414.071282] i915_vma_revoke_fence:301 GEM_BUG_ON(!i915_active_is_idle(&fence->active))
...
<4>[ 609.603992] ------------[ cut here ]------------
<2>[ 609.603995] kernel BUG at drivers/gpu/drm/i915/gt/intel_ggtt_fencing.c:301!
<4>[ 609.604003] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
<4>[ 609.604006] CPU: 0 PID: 268 Comm: kworker/u64:3 Tainted: G U W 6.9.0-CI_DRM_14785-g1ba62f8cea9c+ #1
<4>[ 609.604008] Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-P DDR4 RVP, BIOS RPLPFWI1.R00.4035.A00.2301200723 01/20/2023
<4>[ 609.604010] Workqueue: i915 __i915_gem_free_work [i915]
<4>[ 609.604149] RIP: 0010:i915_vma_revoke_fence+0x187/0x1f0 [i915]
...
<4>[ 609.604271] Call Trace:
<4>[ 609.604273] <TASK>
...
<4>[ 609.604716] __i915_vma_evict+0x2e9/0x550 [i915]
<4>[ 609.604852] __i915_vma_unbind+0x7c/0x160 [i915]
<4>[ 609.604977] force_unbind+0x24/0xa0 [i915]
<4>[ 609.605098] i915_vma_destroy+0x2f/0xa0 [i915]
<4>[ 609.605210] __i915_gem_object_pages_fini+0x51/0x2f0 [i915]
<4>[ 609.605330] __i915_gem_free_objects.isra.0+0x6a/0xc0 [i915]
<4>[ 609.605440] process_scheduled_works+0x351/0x690
...
In the past, there were similar failures reported by CI from other IGT
tests, observed on other platforms.
Before commit 63baf4f3d587 ("drm/i915/gt: Only wait for GPU activity
before unbinding a GGTT fence"), i915_vma_revoke_fence() was waiting for
idleness of vma->active via fence_update(). That commit introduced
vma->fence->active in order for the fence_update() to be able to wait
selectively on that one instead of vma->active since only idleness of
fence registers was needed. But then, another commit 0d86ee35097a
("drm/i915/gt: Make fence revocation unequivocal") replaced the call to
fence_update() in i915_vma_revoke_fence() with only fence_write(), and
also added that GEM_BUG_ON(!i915_active_is_idle(&fence->active)) in front.
No justification was provided on why we might then expect idleness of
vma->fence->active without first waiting on it.
The issue can be potentially caused by a race among revocation of fence
registers on one side and sequential execution of signal callbacks invoked
on completion of a request that was using them on the other, still
processed in parallel to revocation of those fence registers. Fix it by
waiting for idleness of vma->fence->active in i915_vma_revoke_fence().
(cherry picked from commit 24bb052d3dd499c5956abad5f7d8e4fd07da7fb1)
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
drm/i915/gt: Fix potential UAF by revoke of fence registers
CI has been sporadically reporting the following issue triggered by
igt@i915_selftest@live@hangcheck on ADL-P and similar machines:
<6> [414.049203] i915: Running intel_hangcheck_live_selftests/igt_reset_evict_fence
...
<6> [414.068804] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled
<6> [414.068812] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled
<3> [414.070354] Unable to pin Y-tiled fence; err:-4
<3> [414.071282] i915_vma_revoke_fence:301 GEM_BUG_ON(!i915_active_is_idle(&fence->active))
...
<4>[ 609.603992] ------------[ cut here ]------------
<2>[ 609.603995] kernel BUG at drivers/gpu/drm/i915/gt/intel_ggtt_fencing.c:301!
<4>[ 609.604003] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
<4>[ 609.604006] CPU: 0 PID: 268 Comm: kworker/u64:3 Tainted: G U W 6.9.0-CI_DRM_14785-g1ba62f8cea9c+ #1
<4>[ 609.604008] Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-P DDR4 RVP, BIOS RPLPFWI1.R00.4035.A00.2301200723 01/20/2023
<4>[ 609.604010] Workqueue: i915 __i915_gem_free_work [i915]
<4>[ 609.604149] RIP: 0010:i915_vma_revoke_fence+0x187/0x1f0 [i915]
...
<4>[ 609.604271] Call Trace:
<4>[ 609.604273] <TASK>
...
<4>[ 609.604716] __i915_vma_evict+0x2e9/0x550 [i915]
<4>[ 609.604852] __i915_vma_unbind+0x7c/0x160 [i915]
<4>[ 609.604977] force_unbind+0x24/0xa0 [i915]
<4>[ 609.605098] i915_vma_destroy+0x2f/0xa0 [i915]
<4>[ 609.605210] __i915_gem_object_pages_fini+0x51/0x2f0 [i915]
<4>[ 609.605330] __i915_gem_free_objects.isra.0+0x6a/0xc0 [i915]
<4>[ 609.605440] process_scheduled_works+0x351/0x690
...
In the past, there were similar failures reported by CI from other IGT
tests, observed on other platforms.
Before commit 63baf4f3d587 ("drm/i915/gt: Only wait for GPU activity
before unbinding a GGTT fence"), i915_vma_revoke_fence() was waiting for
idleness of vma->active via fence_update(). That commit introduced
vma->fence->active in order for the fence_update() to be able to wait
selectively on that one instead of vma->active since only idleness of
fence registers was needed. But then, another commit 0d86ee35097a
("drm/i915/gt: Make fence revocation unequivocal") replaced the call to
fence_update() in i915_vma_revoke_fence() with only fence_write(), and
also added that GEM_BUG_ON(!i915_active_is_idle(&fence->active)) in front.
No justification was provided on why we might then expect idleness of
vma->fence->active without first waiting on it.
The issue can be potentially caused by a race among revocation of fence
registers on one side and sequential execution of signal callbacks invoked
on completion of a request that was using them on the other, still
processed in parallel to revocation of those fence registers. Fix it by
waiting for idleness of vma->fence->active in i915_vma_revoke_fence().
(cherry picked from commit 24bb052d3dd499c5956abad5f7d8e4fd07da7fb1)
🎖@cveNotify
🚨 CVE-2024-41096
In the Linux kernel, the following vulnerability has been resolved:
PCI/MSI: Fix UAF in msi_capability_init
KFENCE reports the following UAF:
BUG: KFENCE: use-after-free read in __pci_enable_msi_range+0x2c0/0x488
Use-after-free read at 0x0000000024629571 (in kfence-#12):
__pci_enable_msi_range+0x2c0/0x488
pci_alloc_irq_vectors_affinity+0xec/0x14c
pci_alloc_irq_vectors+0x18/0x28
kfence-#12: 0x0000000008614900-0x00000000e06c228d, size=104, cache=kmalloc-128
allocated by task 81 on cpu 7 at 10.808142s:
__kmem_cache_alloc_node+0x1f0/0x2bc
kmalloc_trace+0x44/0x138
msi_alloc_desc+0x3c/0x9c
msi_domain_insert_msi_desc+0x30/0x78
msi_setup_msi_desc+0x13c/0x184
__pci_enable_msi_range+0x258/0x488
pci_alloc_irq_vectors_affinity+0xec/0x14c
pci_alloc_irq_vectors+0x18/0x28
freed by task 81 on cpu 7 at 10.811436s:
msi_domain_free_descs+0xd4/0x10c
msi_domain_free_locked.part.0+0xc0/0x1d8
msi_domain_alloc_irqs_all_locked+0xb4/0xbc
pci_msi_setup_msi_irqs+0x30/0x4c
__pci_enable_msi_range+0x2a8/0x488
pci_alloc_irq_vectors_affinity+0xec/0x14c
pci_alloc_irq_vectors+0x18/0x28
Descriptor allocation done in:
__pci_enable_msi_range
msi_capability_init
msi_setup_msi_desc
msi_insert_msi_desc
msi_domain_insert_msi_desc
msi_alloc_desc
...
Freed in case of failure in __msi_domain_alloc_locked()
__pci_enable_msi_range
msi_capability_init
pci_msi_setup_msi_irqs
msi_domain_alloc_irqs_all_locked
msi_domain_alloc_locked
__msi_domain_alloc_locked => fails
msi_domain_free_locked
...
That failure propagates back to pci_msi_setup_msi_irqs() in
msi_capability_init() which accesses the descriptor for unmasking in the
error exit path.
Cure it by copying the descriptor and using the copy for the error exit path
unmask operation.
[ tglx: Massaged change log ]
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
PCI/MSI: Fix UAF in msi_capability_init
KFENCE reports the following UAF:
BUG: KFENCE: use-after-free read in __pci_enable_msi_range+0x2c0/0x488
Use-after-free read at 0x0000000024629571 (in kfence-#12):
__pci_enable_msi_range+0x2c0/0x488
pci_alloc_irq_vectors_affinity+0xec/0x14c
pci_alloc_irq_vectors+0x18/0x28
kfence-#12: 0x0000000008614900-0x00000000e06c228d, size=104, cache=kmalloc-128
allocated by task 81 on cpu 7 at 10.808142s:
__kmem_cache_alloc_node+0x1f0/0x2bc
kmalloc_trace+0x44/0x138
msi_alloc_desc+0x3c/0x9c
msi_domain_insert_msi_desc+0x30/0x78
msi_setup_msi_desc+0x13c/0x184
__pci_enable_msi_range+0x258/0x488
pci_alloc_irq_vectors_affinity+0xec/0x14c
pci_alloc_irq_vectors+0x18/0x28
freed by task 81 on cpu 7 at 10.811436s:
msi_domain_free_descs+0xd4/0x10c
msi_domain_free_locked.part.0+0xc0/0x1d8
msi_domain_alloc_irqs_all_locked+0xb4/0xbc
pci_msi_setup_msi_irqs+0x30/0x4c
__pci_enable_msi_range+0x2a8/0x488
pci_alloc_irq_vectors_affinity+0xec/0x14c
pci_alloc_irq_vectors+0x18/0x28
Descriptor allocation done in:
__pci_enable_msi_range
msi_capability_init
msi_setup_msi_desc
msi_insert_msi_desc
msi_domain_insert_msi_desc
msi_alloc_desc
...
Freed in case of failure in __msi_domain_alloc_locked()
__pci_enable_msi_range
msi_capability_init
pci_msi_setup_msi_irqs
msi_domain_alloc_irqs_all_locked
msi_domain_alloc_locked
__msi_domain_alloc_locked => fails
msi_domain_free_locked
...
That failure propagates back to pci_msi_setup_msi_irqs() in
msi_capability_init() which accesses the descriptor for unmasking in the
error exit path.
Cure it by copying the descriptor and using the copy for the error exit path
unmask operation.
[ tglx: Massaged change log ]
🎖@cveNotify
🚨 CVE-2024-42064
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Skip pipe if the pipe idx not set properly
[why]
Driver crashes when pipe idx not set properly
[how]
Add code to skip the pipe that idx not set properly
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Skip pipe if the pipe idx not set properly
[why]
Driver crashes when pipe idx not set properly
[how]
Add code to skip the pipe that idx not set properly
🎖@cveNotify
🚨 CVE-2024-42066
In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix potential integer overflow in page size calculation
Explicitly cast tbo->page_alignment to u64 before bit-shifting to
prevent overflow when assigning to min_page_size.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix potential integer overflow in page size calculation
Explicitly cast tbo->page_alignment to u64 before bit-shifting to
prevent overflow when assigning to min_page_size.
🎖@cveNotify