🚨 CVE-2024-38569
In the Linux kernel, the following vulnerability has been resolved:

drivers/perf: hisi_pcie: Fix out-of-bound access when valid event group

The perf tool allows users to create event groups through following
cmd [1], but the driver does not check whether the array index is out of
bounds when writing data to the event_group array. If the number of events
in an event_group is greater than HISI_PCIE_MAX_COUNTERS, the memory write
overflow of event_group array occurs.

Add array index check to fix the possible array out of bounds violation,
and return directly when write new events are written to array bounds.

There are 9 different events in an event_group.
[1] perf stat -e '{pmu/event1/, ... ,pmu/event9/}'

🎖@cveNotify

🚨 CVE-2024-38570
In the Linux kernel, the following vulnerability has been resolved:

gfs2: Fix potential glock use-after-free on unmount

When a DLM lockspace is released and there ares still locks in that
lockspace, DLM will unlock those locks automatically. Commit
fb6791d100d1b started exploiting this behavior to speed up filesystem
unmount: gfs2 would simply free glocks it didn't want to unlock and then
release the lockspace. This didn't take the bast callbacks for
asynchronous lock contention notifications into account, which remain
active until until a lock is unlocked or its lockspace is released.

To prevent those callbacks from accessing deallocated objects, put the
glocks that should not be unlocked on the sd_dead_glocks list, release
the lockspace, and only then free those glocks.

As an additional measure, ignore unexpected ast and bast callbacks if
the receiving glock is dead.

🎖@cveNotify

🚨 CVE-2024-38572
In the Linux kernel, the following vulnerability has been resolved:

wifi: ath12k: fix out-of-bound access of qmi_invoke_handler()

Currently, there is no terminator entry for ath12k_qmi_msg_handlers hence
facing below KASAN warning,

==================================================================
BUG: KASAN: global-out-of-bounds in qmi_invoke_handler+0xa4/0x148
Read of size 8 at addr ffffffd00a6428d8 by task kworker/u8:2/1273

CPU: 0 PID: 1273 Comm: kworker/u8:2 Not tainted 5.4.213 #0
Workqueue: qmi_msg_handler qmi_data_ready_work
Call trace:
dump_backtrace+0x0/0x20c
show_stack+0x14/0x1c
dump_stack+0xe0/0x138
print_address_description.isra.5+0x30/0x330
__kasan_report+0x16c/0x1bc
kasan_report+0xc/0x14
__asan_load8+0xa8/0xb0
qmi_invoke_handler+0xa4/0x148
qmi_handle_message+0x18c/0x1bc
qmi_data_ready_work+0x4ec/0x528
process_one_work+0x2c0/0x440
worker_thread+0x324/0x4b8
kthread+0x210/0x228
ret_from_fork+0x10/0x18

The address belongs to the variable:
ath12k_mac_mon_status_filter_default+0x4bd8/0xfffffffffffe2300 [ath12k]
[...]
==================================================================

Add a dummy terminator entry at the end to assist the qmi_invoke_handler()
in traversing up to the terminator entry without accessing an
out-of-boundary index.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

🎖@cveNotify

🚨 CVE-2024-38576
In the Linux kernel, the following vulnerability has been resolved:

rcu: Fix buffer overflow in print_cpu_stall_info()

The rcuc-starvation output from print_cpu_stall_info() might overflow the
buffer if there is a huge difference in jiffies difference. The situation
might seem improbable, but computers sometimes get very confused about
time, which can result in full-sized integers, and, in this case,
buffer overflow.

Also, the unsigned jiffies difference is printed using %ld, which is
normally for signed integers. This is intentional for debugging purposes,
but it is not obvious from the code.

This commit therefore changes sprintf() to snprintf() and adds a
clarifying comment about intention of %ld format.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

🎖@cveNotify

🚨 CVE-2024-38577
In the Linux kernel, the following vulnerability has been resolved:

rcu-tasks: Fix show_rcu_tasks_trace_gp_kthread buffer overflow

There is a possibility of buffer overflow in
show_rcu_tasks_trace_gp_kthread() if counters, passed
to sprintf() are huge. Counter numbers, needed for this
are unrealistically high, but buffer overflow is still
possible.

Use snprintf() with buffer size instead of sprintf().

Found by Linux Verification Center (linuxtesting.org) with SVACE.

🎖@cveNotify

🚨 CVE-2024-38578
In the Linux kernel, the following vulnerability has been resolved:

ecryptfs: Fix buffer size for tag 66 packet

The 'TAG 66 Packet Format' description is missing the cipher code and
checksum fields that are packed into the message packet. As a result,
the buffer allocated for the packet is 3 bytes too small and
write_tag_66_packet() will write up to 3 bytes past the end of the
buffer.

Fix this by increasing the size of the allocation so the whole packet
will always fit in the buffer.

This fixes the below kasan slab-out-of-bounds bug:

BUG: KASAN: slab-out-of-bounds in ecryptfs_generate_key_packet_set+0x7d6/0xde0
Write of size 1 at addr ffff88800afbb2a5 by task touch/181

CPU: 0 PID: 181 Comm: touch Not tainted 6.6.13-gnu #1 4c9534092be820851bb687b82d1f92a426598dc6
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2/GNU Guix 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x4c/0x70
print_report+0xc5/0x610
? ecryptfs_generate_key_packet_set+0x7d6/0xde0
? kasan_complete_mode_report_info+0x44/0x210
? ecryptfs_generate_key_packet_set+0x7d6/0xde0
kasan_report+0xc2/0x110
? ecryptfs_generate_key_packet_set+0x7d6/0xde0
__asan_store1+0x62/0x80
ecryptfs_generate_key_packet_set+0x7d6/0xde0
? __pfx_ecryptfs_generate_key_packet_set+0x10/0x10
? __alloc_pages+0x2e2/0x540
? __pfx_ovl_open+0x10/0x10 [overlay 30837f11141636a8e1793533a02e6e2e885dad1d]
? dentry_open+0x8f/0xd0
ecryptfs_write_metadata+0x30a/0x550
? __pfx_ecryptfs_write_metadata+0x10/0x10
? ecryptfs_get_lower_file+0x6b/0x190
ecryptfs_initialize_file+0x77/0x150
ecryptfs_create+0x1c2/0x2f0
path_openat+0x17cf/0x1ba0
? __pfx_path_openat+0x10/0x10
do_filp_open+0x15e/0x290
? __pfx_do_filp_open+0x10/0x10
? __kasan_check_write+0x18/0x30
? _raw_spin_lock+0x86/0xf0
? __pfx__raw_spin_lock+0x10/0x10
? __kasan_check_write+0x18/0x30
? alloc_fd+0xf4/0x330
do_sys_openat2+0x122/0x160
? __pfx_do_sys_openat2+0x10/0x10
__x64_sys_openat+0xef/0x170
? __pfx___x64_sys_openat+0x10/0x10
do_syscall_64+0x60/0xd0
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
RIP: 0033:0x7f00a703fd67
Code: 25 00 00 41 00 3d 00 00 41 00 74 37 64 8b 04 25 18 00 00 00 85 c0 75 5b 44 89 e2 48 89 ee bf 9c ff ff ff b8 01 01 00 00 0f 05 <48> 3d 00 f0 ff ff 0f 87 85 00 00 00 48 83 c4 68 5d 41 5c c3 0f 1f
RSP: 002b:00007ffc088e30b0 EFLAGS: 00000246 ORIG_RAX: 0000000000000101
RAX: ffffffffffffffda RBX: 00007ffc088e3368 RCX: 00007f00a703fd67
RDX: 0000000000000941 RSI: 00007ffc088e48d7 RDI: 00000000ffffff9c
RBP: 00007ffc088e48d7 R08: 0000000000000001 R09: 0000000000000000
R10: 00000000000001b6 R11: 0000000000000246 R12: 0000000000000941
R13: 0000000000000000 R14: 00007ffc088e48d7 R15: 00007f00a7180040
</TASK>

Allocated by task 181:
kasan_save_stack+0x2f/0x60
kasan_set_track+0x29/0x40
kasan_save_alloc_info+0x25/0x40
__kasan_kmalloc+0xc5/0xd0
__kmalloc+0x66/0x160
ecryptfs_generate_key_packet_set+0x6d2/0xde0
ecryptfs_write_metadata+0x30a/0x550
ecryptfs_initialize_file+0x77/0x150
ecryptfs_create+0x1c2/0x2f0
path_openat+0x17cf/0x1ba0
do_filp_open+0x15e/0x290
do_sys_openat2+0x122/0x160
__x64_sys_openat+0xef/0x170
do_syscall_64+0x60/0xd0
entry_SYSCALL_64_after_hwframe+0x6e/0xd8

🎖@cveNotify

🚨 CVE-2024-38580
In the Linux kernel, the following vulnerability has been resolved:

epoll: be better about file lifetimes

epoll can call out to vfs_poll() with a file pointer that may race with
the last 'fput()'. That would make f_count go down to zero, and while
the ep->mtx locking means that the resulting file pointer tear-down will
be blocked until the poll returns, it means that f_count is already
dead, and any use of it won't actually get a reference to the file any
more: it's dead regardless.

Make sure we have a valid ref on the file pointer before we call down to
vfs_poll() from the epoll routines.

🎖@cveNotify

🚨 CVE-2024-38581
In the Linux kernel, the following vulnerability has been resolved:

drm/amdgpu/mes: fix use-after-free issue

Delete fence fallback timer to fix the ramdom
use-after-free issue.

v2: move to amdgpu_mes.c

🎖@cveNotify

🚨 CVE-2024-38583
In the Linux kernel, the following vulnerability has been resolved:

nilfs2: fix use-after-free of timer for log writer thread

Patch series "nilfs2: fix log writer related issues".

This bug fix series covers three nilfs2 log writer-related issues,
including a timer use-after-free issue and potential deadlock issue on
unmount, and a potential freeze issue in event synchronization found
during their analysis. Details are described in each commit log.


This patch (of 3):

A use-after-free issue has been reported regarding the timer sc_timer on
the nilfs_sc_info structure.

The problem is that even though it is used to wake up a sleeping log
writer thread, sc_timer is not shut down until the nilfs_sc_info structure
is about to be freed, and is used regardless of the thread's lifetime.

Fix this issue by limiting the use of sc_timer only while the log writer
thread is alive.

🎖@cveNotify

🚨 CVE-2024-38587
In the Linux kernel, the following vulnerability has been resolved:

speakup: Fix sizeof() vs ARRAY_SIZE() bug

The "buf" pointer is an array of u16 values. This code should be
using ARRAY_SIZE() (which is 256) instead of sizeof() (which is 512),
otherwise it can the still got out of bounds.

🎖@cveNotify

🚨 CVE-2024-38590
In the Linux kernel, the following vulnerability has been resolved:

RDMA/hns: Modify the print level of CQE error

Too much print may lead to a panic in kernel. Change ibdev_err() to
ibdev_err_ratelimited(), and change the printing level of cqe dump
to debug level.

🎖@cveNotify

🚨 CVE-2024-38592
In the Linux kernel, the following vulnerability has been resolved:

drm/mediatek: Init `ddp_comp` with devm_kcalloc()

In the case where `conn_routes` is true we allocate an extra slot in
the `ddp_comp` array but mtk_drm_crtc_create() never seemed to
initialize it in the test case I ran. For me, this caused a later
crash when we looped through the array in mtk_drm_crtc_mode_valid().
This showed up for me when I booted with `slub_debug=FZPUA` which
poisons the memory initially. Without `slub_debug` I couldn't
reproduce, presumably because the later code handles the value being
NULL and in most cases (not guaranteed in all cases) the memory the
allocator returned started out as 0.

It really doesn't hurt to initialize the array with devm_kcalloc()
since the array is small and the overhead of initting a handful of
elements to 0 is small. In general initting memory to zero is a safer
practice and usually it's suggested to only use the non-initting alloc
functions if you really need to.

Let's switch the function to use an allocation function that zeros the
memory. For me, this avoids the crash.

🎖@cveNotify

🚨 CVE-2024-38599
In the Linux kernel, the following vulnerability has been resolved:

jffs2: prevent xattr node from overflowing the eraseblock

Add a check to make sure that the requested xattr node size is no larger
than the eraseblock minus the cleanmarker.

Unlike the usual inode nodes, the xattr nodes aren't split into parts
and spread across multiple eraseblocks, which means that a xattr node
must not occupy more than one eraseblock. If the requested xattr value is
too large, the xattr node can spill onto the next eraseblock, overwriting
the nodes and causing errors such as:

jffs2: argh. node added in wrong place at 0x0000b050(2)
jffs2: nextblock 0x0000a000, expected at 0000b00c
jffs2: error: (823) do_verify_xattr_datum: node CRC failed at 0x01e050,
read=0xfc892c93, calc=0x000000
jffs2: notice: (823) jffs2_get_inode_nodes: Node header CRC failed
at 0x01e00c. {848f,2fc4,0fef511f,59a3d171}
jffs2: Node at 0x0000000c with length 0x00001044 would run over the
end of the erase block
jffs2: Perhaps the file system was created with the wrong erase size?
jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found
at 0x00000010: 0x1044 instead

This breaks the filesystem and can lead to KASAN crashes such as:

BUG: KASAN: slab-out-of-bounds in jffs2_sum_add_kvec+0x125e/0x15d0
Read of size 4 at addr ffff88802c31e914 by task repro/830
CPU: 0 PID: 830 Comm: repro Not tainted 6.9.0-rc3+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS Arch Linux 1.16.3-1-1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0xc6/0x120
print_report+0xc4/0x620
? __virt_addr_valid+0x308/0x5b0
kasan_report+0xc1/0xf0
? jffs2_sum_add_kvec+0x125e/0x15d0
? jffs2_sum_add_kvec+0x125e/0x15d0
jffs2_sum_add_kvec+0x125e/0x15d0
jffs2_flash_direct_writev+0xa8/0xd0
jffs2_flash_writev+0x9c9/0xef0
? __x64_sys_setxattr+0xc4/0x160
? do_syscall_64+0x69/0x140
? entry_SYSCALL_64_after_hwframe+0x76/0x7e
[...]

Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

🎖@cveNotify

🚨 CVE-2024-38605
In the Linux kernel, the following vulnerability has been resolved:

ALSA: core: Fix NULL module pointer assignment at card init

The commit 81033c6b584b ("ALSA: core: Warn on empty module")
introduced a WARN_ON() for a NULL module pointer passed at snd_card
object creation, and it also wraps the code around it with '#ifdef
MODULE'. This works in most cases, but the devils are always in
details. "MODULE" is defined when the target code (i.e. the sound
core) is built as a module; but this doesn't mean that the caller is
also built-in or not. Namely, when only the sound core is built-in
(CONFIG_SND=y) while the driver is a module (CONFIG_SND_USB_AUDIO=m),
the passed module pointer is ignored even if it's non-NULL, and
card->module remains as NULL. This would result in the missing module
reference up/down at the device open/close, leading to a race with the
code execution after the module removal.

For addressing the bug, move the assignment of card->module again out
of ifdef. The WARN_ON() is still wrapped with ifdef because the
module can be really NULL when all sound drivers are built-in.

Note that we keep 'ifdef MODULE' for WARN_ON(), otherwise it would
lead to a false-positive NULL module check. Admittedly it won't catch
perfectly, i.e. no check is performed when CONFIG_SND=y. But, it's no
real problem as it's only for debugging, and the condition is pretty
rare.

🎖@cveNotify

🚨 CVE-2024-38606
In the Linux kernel, the following vulnerability has been resolved:

crypto: qat - validate slices count returned by FW

The function adf_send_admin_tl_start() enables the telemetry (TL)
feature on a QAT device by sending the ICP_QAT_FW_TL_START message to
the firmware. This triggers the FW to start writing TL data to a DMA
buffer in memory and returns an array containing the number of
accelerators of each type (slices) supported by this HW.
The pointer to this array is stored in the adf_tl_hw_data data
structure called slice_cnt.

The array slice_cnt is then used in the function tl_print_dev_data()
to report in debugfs only statistics about the supported accelerators.
An incorrect value of the elements in slice_cnt might lead to an out
of bounds memory read.
At the moment, there isn't an implementation of FW that returns a wrong
value, but for robustness validate the slice count array returned by FW.

🎖@cveNotify

🚨 CVE-2024-38610
In the Linux kernel, the following vulnerability has been resolved:

drivers/virt/acrn: fix PFNMAP PTE checks in acrn_vm_ram_map()

Patch series "mm: follow_pte() improvements and acrn follow_pte() fixes".

Patch #1 fixes a bunch of issues I spotted in the acrn driver. It
compiles, that's all I know. I'll appreciate some review and testing from
acrn folks.

Patch #2+#3 improve follow_pte(), passing a VMA instead of the MM, adding
more sanity checks, and improving the documentation. Gave it a quick test
on x86-64 using VM_PAT that ends up using follow_pte().


This patch (of 3):

We currently miss handling various cases, resulting in a dangerous
follow_pte() (previously follow_pfn()) usage.

(1) We're not checking PTE write permissions.

Maybe we should simply always require pte_write() like we do for
pin_user_pages_fast(FOLL_WRITE)? Hard to tell, so let's check for
ACRN_MEM_ACCESS_WRITE for now.

(2) We're not rejecting refcounted pages.

As we are not using MMU notifiers, messing with refcounted pages is
dangerous and can result in use-after-free. Let's make sure to reject them.

(3) We are only looking at the first PTE of a bigger range.

We only lookup a single PTE, but memmap->len may span a larger area.
Let's loop over all involved PTEs and make sure the PFN range is
actually contiguous. Reject everything else: it couldn't have worked
either way, and rather made use access PFNs we shouldn't be accessing.

🎖@cveNotify

🚨 CVE-2024-38611
In the Linux kernel, the following vulnerability has been resolved:

media: i2c: et8ek8: Don't strip remove function when driver is builtin

Using __exit for the remove function results in the remove callback
being discarded with CONFIG_VIDEO_ET8EK8=y. When such a device gets
unbound (e.g. using sysfs or hotplug), the driver is just removed
without the cleanup being performed. This results in resource leaks. Fix
it by compiling in the remove callback unconditionally.

This also fixes a W=1 modpost warning:

WARNING: modpost: drivers/media/i2c/et8ek8/et8ek8: section mismatch in reference: et8ek8_i2c_driver+0x10 (section: .data) -> et8ek8_remove (section: .exit.text)

🎖@cveNotify

🚨 CVE-2024-38612
In the Linux kernel, the following vulnerability has been resolved:

ipv6: sr: fix invalid unregister error path

The error path of seg6_init() is wrong in case CONFIG_IPV6_SEG6_LWTUNNEL
is not defined. In that case if seg6_hmac_init() fails, the
genl_unregister_family() isn't called.

This issue exist since commit 46738b1317e1 ("ipv6: sr: add option to control
lwtunnel support"), and commit 5559cea2d5aa ("ipv6: sr: fix possible
use-after-free and null-ptr-deref") replaced unregister_pernet_subsys()
with genl_unregister_family() in this error path.

🎖@cveNotify

🚨 CVE-2024-38614
In the Linux kernel, the following vulnerability has been resolved:

openrisc: traps: Don't send signals to kernel mode threads

OpenRISC exception handling sends signals to user processes on floating
point exceptions and trap instructions (for debugging) among others.
There is a bug where the trap handling logic may send signals to kernel
threads, we should not send these signals to kernel threads, if that
happens we treat it as an error.

This patch adds conditions to die if the kernel receives these
exceptions in kernel mode code.

🎖@cveNotify

🚨 CVE-2024-33619
In the Linux kernel, the following vulnerability has been resolved:

efi: libstub: only free priv.runtime_map when allocated

priv.runtime_map is only allocated when efi_novamap is not set.
Otherwise, it is an uninitialized value. In the error path, it is freed
unconditionally. Avoid passing an uninitialized value to free_pool.
Free priv.runtime_map only when it was allocated.

This bug was discovered and resolved using Coverity Static Analysis
Security Testing (SAST) by Synopsys, Inc.

🎖@cveNotify

🚨 CVE-2024-36286
In the Linux kernel, the following vulnerability has been resolved:

netfilter: nfnetlink_queue: acquire rcu_read_lock() in instance_destroy_rcu()

syzbot reported that nf_reinject() could be called without rcu_read_lock() :

WARNING: suspicious RCU usage
6.9.0-rc7-syzkaller-02060-g5c1672705a1a #0 Not tainted

net/netfilter/nfnetlink_queue.c:263 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1
2 locks held by syz-executor.4/13427:
#0: ffffffff8e334f60 (rcu_callback){....}-{0:0}, at: rcu_lock_acquire include/linux/rcupdate.h:329 [inline]
#0: ffffffff8e334f60 (rcu_callback){....}-{0:0}, at: rcu_do_batch kernel/rcu/tree.c:2190 [inline]
#0: ffffffff8e334f60 (rcu_callback){....}-{0:0}, at: rcu_core+0xa86/0x1830 kernel/rcu/tree.c:2471
#1: ffff88801ca92958 (&inst->lock){+.-.}-{2:2}, at: spin_lock_bh include/linux/spinlock.h:356 [inline]
#1: ffff88801ca92958 (&inst->lock){+.-.}-{2:2}, at: nfqnl_flush net/netfilter/nfnetlink_queue.c:405 [inline]
#1: ffff88801ca92958 (&inst->lock){+.-.}-{2:2}, at: instance_destroy_rcu+0x30/0x220 net/netfilter/nfnetlink_queue.c:172

stack backtrace:
CPU: 0 PID: 13427 Comm: syz-executor.4 Not tainted 6.9.0-rc7-syzkaller-02060-g5c1672705a1a #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114
lockdep_rcu_suspicious+0x221/0x340 kernel/locking/lockdep.c:6712
nf_reinject net/netfilter/nfnetlink_queue.c:323 [inline]
nfqnl_reinject+0x6ec/0x1120 net/netfilter/nfnetlink_queue.c:397
nfqnl_flush net/netfilter/nfnetlink_queue.c:410 [inline]
instance_destroy_rcu+0x1ae/0x220 net/netfilter/nfnetlink_queue.c:172
rcu_do_batch kernel/rcu/tree.c:2196 [inline]
rcu_core+0xafd/0x1830 kernel/rcu/tree.c:2471
handle_softirqs+0x2d6/0x990 kernel/softirq.c:554
__do_softirq kernel/softirq.c:588 [inline]
invoke_softirq kernel/softirq.c:428 [inline]
__irq_exit_rcu+0xf4/0x1c0 kernel/softirq.c:637
irq_exit_rcu+0x9/0x30 kernel/softirq.c:649
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1043 [inline]
sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1043
</IRQ>
<TASK>

🎖@cveNotify