🚨 CVE-2024-1635
A vulnerability was found in Undertow. This vulnerability impacts a server that supports the wildfly-http-client protocol. Whenever a malicious user opens and closes a connection with the HTTP port of the server and then closes the connection immediately, the server will end with both memory and open file limits exhausted at some point, depending on the amount of memory available.
At HTTP upgrade to remoting, the WriteTimeoutStreamSinkConduit leaks connections if RemotingConnection is closed by Remoting ServerConnectionOpenListener. Because the remoting connection originates in Undertow as part of the HTTP upgrade, there is an external layer to the remoting connection. This connection is unaware of the outermost layer when closing the connection during the connection opening procedure. Hence, the Undertow WriteTimeoutStreamSinkConduit is not notified of the closed connection in this scenario. Because WriteTimeoutStreamSinkConduit creates a timeout task, the whole dependency tree leaks via that task, which is added to XNIO WorkerThread. So, the workerThread points to the Undertow conduit, which contains the connections and causes the leak.
🎖@cveNotify
A vulnerability was found in Undertow. This vulnerability impacts a server that supports the wildfly-http-client protocol. Whenever a malicious user opens and closes a connection with the HTTP port of the server and then closes the connection immediately, the server will end with both memory and open file limits exhausted at some point, depending on the amount of memory available.
At HTTP upgrade to remoting, the WriteTimeoutStreamSinkConduit leaks connections if RemotingConnection is closed by Remoting ServerConnectionOpenListener. Because the remoting connection originates in Undertow as part of the HTTP upgrade, there is an external layer to the remoting connection. This connection is unaware of the outermost layer when closing the connection during the connection opening procedure. Hence, the Undertow WriteTimeoutStreamSinkConduit is not notified of the closed connection in this scenario. Because WriteTimeoutStreamSinkConduit creates a timeout task, the whole dependency tree leaks via that task, which is added to XNIO WorkerThread. So, the workerThread points to the Undertow conduit, which contains the connections and causes the leak.
🎖@cveNotify
🚨 CVE-2024-1132
A flaw was found in Keycloak, where it does not properly validate URLs included in a redirect. This issue could allow an attacker to construct a malicious request to bypass validation and access other URLs and sensitive information within the domain or conduct further attacks. This flaw affects any client that utilizes a wildcard in the Valid Redirect URIs field, and requires user interaction within the malicious URL.
🎖@cveNotify
A flaw was found in Keycloak, where it does not properly validate URLs included in a redirect. This issue could allow an attacker to construct a malicious request to bypass validation and access other URLs and sensitive information within the domain or conduct further attacks. This flaw affects any client that utilizes a wildcard in the Valid Redirect URIs field, and requires user interaction within the malicious URL.
🎖@cveNotify
🚨 CVE-2024-7885
A vulnerability was found in Undertow where the ProxyProtocolReadListener reuses the same StringBuilder instance across multiple requests. This issue occurs when the parseProxyProtocolV1 method processes multiple requests on the same HTTP connection. As a result, different requests may share the same StringBuilder instance, potentially leading to information leakage between requests or responses. In some cases, a value from a previous request or response may be erroneously reused, which could lead to unintended data exposure. This issue primarily results in errors and connection termination but creates a risk of data leakage in multi-request environments.
🎖@cveNotify
A vulnerability was found in Undertow where the ProxyProtocolReadListener reuses the same StringBuilder instance across multiple requests. This issue occurs when the parseProxyProtocolV1 method processes multiple requests on the same HTTP connection. As a result, different requests may share the same StringBuilder instance, potentially leading to information leakage between requests or responses. In some cases, a value from a previous request or response may be erroneously reused, which could lead to unintended data exposure. This issue primarily results in errors and connection termination but creates a risk of data leakage in multi-request environments.
🎖@cveNotify
🚨 CVE-2024-7341
A session fixation issue was discovered in the SAML adapters provided by Keycloak. The session ID and JSESSIONID cookie are not changed at login time, even when the turnOffChangeSessionIdOnLogin option is configured. This flaw allows an attacker who hijacks the current session before authentication to trigger session fixation.
🎖@cveNotify
A session fixation issue was discovered in the SAML adapters provided by Keycloak. The session ID and JSESSIONID cookie are not changed at login time, even when the turnOffChangeSessionIdOnLogin option is configured. This flaw allows an attacker who hijacks the current session before authentication to trigger session fixation.
🎖@cveNotify
🚨 CVE-2024-8698
A flaw exists in the SAML signature validation method within the Keycloak XMLSignatureUtil class. The method incorrectly determines whether a SAML signature is for the full document or only for specific assertions based on the position of the signature in the XML document, rather than the Reference element used to specify the signed element. This flaw allows attackers to create crafted responses that can bypass the validation, potentially leading to privilege escalation or impersonation attacks.
🎖@cveNotify
A flaw exists in the SAML signature validation method within the Keycloak XMLSignatureUtil class. The method incorrectly determines whether a SAML signature is for the full document or only for specific assertions based on the position of the signature in the XML document, rather than the Reference element used to specify the signed element. This flaw allows attackers to create crafted responses that can bypass the validation, potentially leading to privilege escalation or impersonation attacks.
🎖@cveNotify
🚨 CVE-2024-8883
A misconfiguration flaw was found in Keycloak. This issue can allow an attacker to redirect users to an arbitrary URL if a 'Valid Redirect URI' is set to http://localhost or http://127.0.0.1, enabling sensitive information such as authorization codes to be exposed to the attacker, potentially leading to session hijacking.
🎖@cveNotify
A misconfiguration flaw was found in Keycloak. This issue can allow an attacker to redirect users to an arbitrary URL if a 'Valid Redirect URI' is set to http://localhost or http://127.0.0.1, enabling sensitive information such as authorization codes to be exposed to the attacker, potentially leading to session hijacking.
🎖@cveNotify
🚨 CVE-2024-10234
A vulnerability was found in Wildfly, where a user may perform Cross-site scripting in the Wildfly deployment system. This flaw allows an attacker or insider to execute a deployment with a malicious payload, which could trigger undesired behavior against the server.
🎖@cveNotify
A vulnerability was found in Wildfly, where a user may perform Cross-site scripting in the Wildfly deployment system. This flaw allows an attacker or insider to execute a deployment with a malicious payload, which could trigger undesired behavior against the server.
🎖@cveNotify
🚨 CVE-2024-10270
A vulnerability was found in the Keycloak-services package. If untrusted data is passed to the SearchQueryUtils method, it could lead to a denial of service (DoS) scenario by exhausting system resources due to a Regex complexity.
🎖@cveNotify
A vulnerability was found in the Keycloak-services package. If untrusted data is passed to the SearchQueryUtils method, it could lead to a denial of service (DoS) scenario by exhausting system resources due to a Regex complexity.
🎖@cveNotify
🚨 CVE-2024-10451
A flaw was found in Keycloak. This issue occurs because sensitive runtime values, such as passwords, may be captured during the Keycloak build process and embedded as default values in bytecode, leading to unintended information disclosure. In Keycloak 26, sensitive data specified directly in environment variables during the build process is also stored as a default values, making it accessible during runtime. Indirect usage of environment variables for SPI options and Quarkus properties is also vulnerable due to unconditional expansion by PropertyMapper logic, capturing sensitive data as default values in all Keycloak versions up to 26.0.2.
🎖@cveNotify
A flaw was found in Keycloak. This issue occurs because sensitive runtime values, such as passwords, may be captured during the Keycloak build process and embedded as default values in bytecode, leading to unintended information disclosure. In Keycloak 26, sensitive data specified directly in environment variables during the build process is also stored as a default values, making it accessible during runtime. Indirect usage of environment variables for SPI options and Quarkus properties is also vulnerable due to unconditional expansion by PropertyMapper logic, capturing sensitive data as default values in all Keycloak versions up to 26.0.2.
🎖@cveNotify
🚨 CVE-2024-10492
A vulnerability was found in Keycloak. A user with high privileges could read sensitive information from a Vault file that is not within the expected context. This attacker must have previous high access to the Keycloak server in order to perform resource creation, for example, an LDAP provider configuration and set up a Vault read file, which will only inform whether that file exists or not.
🎖@cveNotify
A vulnerability was found in Keycloak. A user with high privileges could read sensitive information from a Vault file that is not within the expected context. This attacker must have previous high access to the Keycloak server in order to perform resource creation, for example, an LDAP provider configuration and set up a Vault read file, which will only inform whether that file exists or not.
🎖@cveNotify
🚨 CVE-2024-9666
A vulnerability was found in the Keycloak Server. The Keycloak Server is vulnerable to a denial of service (DoS) attack due to improper handling of proxy headers. When Keycloak is configured to accept incoming proxy headers, it may accept non-IP values, such as obfuscated identifiers, without proper validation. This issue can lead to costly DNS resolution operations, which an attacker could exploit to tie up IO threads and potentially cause a denial of service.
The attacker must have access to send requests to a Keycloak instance that is configured to accept proxy headers, specifically when reverse proxies do not overwrite incoming headers, and Keycloak is configured to trust these headers.
🎖@cveNotify
A vulnerability was found in the Keycloak Server. The Keycloak Server is vulnerable to a denial of service (DoS) attack due to improper handling of proxy headers. When Keycloak is configured to accept incoming proxy headers, it may accept non-IP values, such as obfuscated identifiers, without proper validation. This issue can lead to costly DNS resolution operations, which an attacker could exploit to tie up IO threads and potentially cause a denial of service.
The attacker must have access to send requests to a Keycloak instance that is configured to accept proxy headers, specifically when reverse proxies do not overwrite incoming headers, and Keycloak is configured to trust these headers.
🎖@cveNotify
🚨 CVE-2024-11734
A denial of service vulnerability was found in Keycloak that could allow an administrative user with the right to change realm settings to disrupt the service. This action is done by modifying any of the security headers and inserting newlines, which causes the Keycloak server to write to a request that has already been terminated, leading to the failure of said request.
🎖@cveNotify
A denial of service vulnerability was found in Keycloak that could allow an administrative user with the right to change realm settings to disrupt the service. This action is done by modifying any of the security headers and inserting newlines, which causes the Keycloak server to write to a request that has already been terminated, leading to the failure of said request.
🎖@cveNotify
🚨 CVE-2024-11736
A vulnerability was found in Keycloak. Admin users may have to access sensitive server environment variables and system properties through user-configurable URLs. When configuring backchannel logout URLs or admin URLs, admin users can include placeholders like ${env.VARNAME} or ${PROPNAME}. The server replaces these placeholders with the actual values of environment variables or system properties during URL processing.
🎖@cveNotify
A vulnerability was found in Keycloak. Admin users may have to access sensitive server environment variables and system properties through user-configurable URLs. When configuring backchannel logout URLs or admin URLs, admin users can include placeholders like ${env.VARNAME} or ${PROPNAME}. The server replaces these placeholders with the actual values of environment variables or system properties during URL processing.
🎖@cveNotify
🚨 CVE-2025-23367
A flaw was found in the Wildfly Server Role Based Access Control (RBAC) provider. When authorization to control management operations is secured using the Role Based Access Control provider, a user without the required privileges can suspend or resume the server. A user with a Monitor or Auditor role is supposed to have only read access permissions and should not be able to suspend the server.
The vulnerability is caused by the Suspend and Resume handlers not performing authorization checks to validate whether the current user has the required permissions to proceed with the action.
🎖@cveNotify
A flaw was found in the Wildfly Server Role Based Access Control (RBAC) provider. When authorization to control management operations is secured using the Role Based Access Control provider, a user without the required privileges can suspend or resume the server. A user with a Monitor or Auditor role is supposed to have only read access permissions and should not be able to suspend the server.
The vulnerability is caused by the Suspend and Resume handlers not performing authorization checks to validate whether the current user has the required permissions to proceed with the action.
🎖@cveNotify
🚨 CVE-2025-23368
A flaw was found in Wildfly Elytron integration. The component does not implement sufficient measures to prevent multiple failed authentication attempts within a short time frame, making it more susceptible to brute force attacks via CLI.
🎖@cveNotify
A flaw was found in Wildfly Elytron integration. The component does not implement sufficient measures to prevent multiple failed authentication attempts within a short time frame, making it more susceptible to brute force attacks via CLI.
🎖@cveNotify
🚨 CVE-2024-3884
A flaw was found in Undertow that can cause remote denial of service attacks. When the server uses the FormEncodedDataDefinition.doParse(StreamSourceChannel) method to parse large form data encoding with application/x-www-form-urlencoded, the method will cause an OutOfMemory issue. This flaw allows unauthorized users to cause a remote denial of service (DoS) attack.
🎖@cveNotify
A flaw was found in Undertow that can cause remote denial of service attacks. When the server uses the FormEncodedDataDefinition.doParse(StreamSourceChannel) method to parse large form data encoding with application/x-www-form-urlencoded, the method will cause an OutOfMemory issue. This flaw allows unauthorized users to cause a remote denial of service (DoS) attack.
🎖@cveNotify
🚨 CVE-2026-18753
The
product firmware contains an embedded, static RSA private key utilized by the
Lighttpd web server for TLS termination. Exposure of this private key allows
malicious actors to breach the confidentiality and integrity of HTTPS
communications, enabling traffic decryption and server spoofing.
🎖@cveNotify
The
product firmware contains an embedded, static RSA private key utilized by the
Lighttpd web server for TLS termination. Exposure of this private key allows
malicious actors to breach the confidentiality and integrity of HTTPS
communications, enabling traffic decryption and server spoofing.
🎖@cveNotify
GeoVision
Cyber Security - GeoVision
- GeoVision specializes in advanced video surveillance solutions, offering state-of-the-art IP cameras, cloud-based surveillance platforms, and tailored surveillance software designed for business buildings, factories, and retail environments. Enhance public…
🚨 CVE-2026-18754
The
product firmware contains an embedded, static RSA private key utilized by the
Lighttpd web server for TLS termination. Exposure of this private key allows
malicious actors to breach the confidentiality and integrity of HTTPS
communications, enabling traffic decryption and server spoofing.
🎖@cveNotify
The
product firmware contains an embedded, static RSA private key utilized by the
Lighttpd web server for TLS termination. Exposure of this private key allows
malicious actors to breach the confidentiality and integrity of HTTPS
communications, enabling traffic decryption and server spoofing.
🎖@cveNotify
GeoVision
Cyber Security - GeoVision
- GeoVision specializes in advanced video surveillance solutions, offering state-of-the-art IP cameras, cloud-based surveillance platforms, and tailored surveillance software designed for business buildings, factories, and retail environments. Enhance public…
🚨 CVE-2026-18755
A DLL hijacking vulnerability in GeoVision GV-ASManager allows a local attacker with write access to an unsafe search directory to execute arbitrary code. By placing a crafted dynamic-link library (DLL) file into the application search path prior to the legitimate library, the malicious code is loaded and executed under the security privileges of the GV-ASManager process.
🎖@cveNotify
A DLL hijacking vulnerability in GeoVision GV-ASManager allows a local attacker with write access to an unsafe search directory to execute arbitrary code. By placing a crafted dynamic-link library (DLL) file into the application search path prior to the legitimate library, the malicious code is loaded and executed under the security privileges of the GV-ASManager process.
🎖@cveNotify
GeoVision
Cyber Security - GeoVision
- GeoVision specializes in advanced video surveillance solutions, offering state-of-the-art IP cameras, cloud-based surveillance platforms, and tailored surveillance software designed for business buildings, factories, and retail environments. Enhance public…
🚨 CVE-2026-67243
freo2 provided by refirio contains an unrestricted upload of file with dangerous type vulnerability. A user with the highest-level administrative privileges for the product may upload an executable file and execute arbitrary OS commands.
🎖@cveNotify
freo2 provided by refirio contains an unrestricted upload of file with dangerous type vulnerability. A user with the highest-level administrative privileges for the product may upload an executable file and execute arbitrary OS commands.
🎖@cveNotify
GitHub
Commits · refirio/freo2
Contribute to refirio/freo2 development by creating an account on GitHub.
🚨 CVE-2024-8698
A flaw exists in the SAML signature validation method within the Keycloak XMLSignatureUtil class. The method incorrectly determines whether a SAML signature is for the full document or only for specific assertions based on the position of the signature in the XML document, rather than the Reference element used to specify the signed element. This flaw allows attackers to create crafted responses that can bypass the validation, potentially leading to privilege escalation or impersonation attacks.
🎖@cveNotify
A flaw exists in the SAML signature validation method within the Keycloak XMLSignatureUtil class. The method incorrectly determines whether a SAML signature is for the full document or only for specific assertions based on the position of the signature in the XML document, rather than the Reference element used to specify the signed element. This flaw allows attackers to create crafted responses that can bypass the validation, potentially leading to privilege escalation or impersonation attacks.
🎖@cveNotify