π¨ CVE-2026-69192
ip-address is a library for parsing and manipulating IPv4 and IPv6 addresses in JavaScript. Prior to 10.3.1, Address4 accepts an octet written with a leading zero and decodes it as decimal, while the WHATWG URL host parser, inet_aton, and getaddrinfo all decode a leading zero as octal. The library and the network stack therefore disagree about which host a string names. new Address4('012.0.0.1') reports correctForm() of 12.0.0.1 and isPrivate() of false, but fetch('http://012.0.0.1/') connects to 10.0.0.1. An application that builds a network trust-boundary decision on these checks, for example a filter intended to block Server-Side Request Forgery, or SSRF, will classify an internal target as external and allow the request. The defect is in the parse gate rather than in any one classifier, so every consumer of Address4 inherits it: isPrivate(), isLoopback(), isLinkLocal(), isCGNAT(), isInSubnet(), isHostInSubnet(), and correctForm() are all computed from the mis-decoded octets. This issue is fixed in version 10.3.1.
π@cveNotify
ip-address is a library for parsing and manipulating IPv4 and IPv6 addresses in JavaScript. Prior to 10.3.1, Address4 accepts an octet written with a leading zero and decodes it as decimal, while the WHATWG URL host parser, inet_aton, and getaddrinfo all decode a leading zero as octal. The library and the network stack therefore disagree about which host a string names. new Address4('012.0.0.1') reports correctForm() of 12.0.0.1 and isPrivate() of false, but fetch('http://012.0.0.1/') connects to 10.0.0.1. An application that builds a network trust-boundary decision on these checks, for example a filter intended to block Server-Side Request Forgery, or SSRF, will classify an internal target as external and allow the request. The defect is in the parse gate rather than in any one classifier, so every consumer of Address4 inherits it: isPrivate(), isLoopback(), isLinkLocal(), isCGNAT(), isInSubnet(), isHostInSubnet(), and correctForm() are all computed from the mis-decoded octets. This issue is fixed in version 10.3.1.
π@cveNotify
GitHub
Reject octal-ambiguous IPv4 octets and stacked subnet suffixes (GHSA-β¦ Β· beaugunderson/ip-address@56368cb
β¦mwp4-54f8-5fhr)
Address4 accepted an octet written with a leading zero and decoded it as
decimal, while the WHATWG URL host parser, inet_aton and getaddrinfo decode a
leading zero as octal. The l...
Address4 accepted an octet written with a leading zero and decoded it as
decimal, while the WHATWG URL host parser, inet_aton and getaddrinfo decode a
leading zero as octal. The l...
π¨ CVE-2026-69198
ip-address is a library for parsing and manipulating IPv4 and IPv6 addresses in JavaScript. From 10.1.1 until 10.2.2, every special-use classification method is built on isInSubnet, which short-circuits to false whenever the address's own subnet mask is shorter than the reference range's mask. That mask comes verbatim from the CIDR suffix on the parsed input, so appending a suffix such as /0 suppresses classification entirely: isLoopback(), isPrivate(), isLinkLocal(), isCGNAT(), isMulticast(), isUnspecified(), isBroadcast(), isULA(), and getType() all report an internal address as unremarkable, while correctForm() and address still return the real internal target. An application that builds a network trust-boundary decision on these checks, for example a filter intended to block Server-Side Request Forgery, or SSRF, may therefore treat an internal target as external and allow the request. The underlying bit comparison is correct, and mask(n) already returns the first n bits of the full parsed address independently of subnetMask; the defect is solely that the containment guard sits in the classification path. This issue is fixed in version 10.2.2.
π@cveNotify
ip-address is a library for parsing and manipulating IPv4 and IPv6 addresses in JavaScript. From 10.1.1 until 10.2.2, every special-use classification method is built on isInSubnet, which short-circuits to false whenever the address's own subnet mask is shorter than the reference range's mask. That mask comes verbatim from the CIDR suffix on the parsed input, so appending a suffix such as /0 suppresses classification entirely: isLoopback(), isPrivate(), isLinkLocal(), isCGNAT(), isMulticast(), isUnspecified(), isBroadcast(), isULA(), and getType() all report an internal address as unremarkable, while correctForm() and address still return the real internal target. An application that builds a network trust-boundary decision on these checks, for example a filter intended to block Server-Side Request Forgery, or SSRF, may therefore treat an internal target as external and allow the request. The underlying bit comparison is correct, and mask(n) already returns the first n bits of the full parsed address independently of subnetMask; the defect is solely that the containment guard sits in the classification path. This issue is fixed in version 10.2.2.
π@cveNotify
GitHub
Merge commit from fork Β· beaugunderson/ip-address@488fe9b
Every special-use classifier was built on isInSubnet, which short-circuits to
false when the receiver's prefix is shorter than the reference range's. That
prefix comes from the CIDR...
false when the receiver's prefix is shorter than the reference range's. That
prefix comes from the CIDR...
π¨ CVE-2026-32274
Black is the uncompromising Python code formatter. Starting in version 24.3.0 and prior to version 26.3.1, Black writes a cache file, the name of which is computed from various formatting options. The value of the --python-cell-magics option was placed in the filename without sanitization, which allowed an attacker who controls the value of this argument to write cache files to arbitrary file system locations. Fixed in Black 26.3.1.
π@cveNotify
Black is the uncompromising Python code formatter. Starting in version 24.3.0 and prior to version 26.3.1, Black writes a cache file, the name of which is computed from various formatting options. The value of the --python-cell-magics option was placed in the filename without sanitization, which allowed an attacker who controls the value of this argument to write cache files to arbitrary file system locations. Fixed in Black 26.3.1.
π@cveNotify
π¨ CVE-2026-44221
ArcadeDB is a Multi-Model DBMS. Starting in version 21.10.1 and prior to version 26.4.2, authenticated users and API tokens scoped to a specific database could read, write, and mutate schema on any other database on the same server. Two distinct defects contributed: (1) ServerSecurityUser.getDatabaseUser() returned a DB user with an uninitialized fileAccessMap, which requestAccessOnFile treated as allow-all; (2) ArcadeDBServer.createDatabase() omitted factory.setSecurity(...) so any database created via POST /api/v1/server {"command":"create database X"} had its entire record-level authorization system silently disabled. In combination, record-level and database-level authorization could be bypassed by any authenticated principal. This vulnerability is fixed in 26.4.2.
π@cveNotify
ArcadeDB is a Multi-Model DBMS. Starting in version 21.10.1 and prior to version 26.4.2, authenticated users and API tokens scoped to a specific database could read, write, and mutate schema on any other database on the same server. Two distinct defects contributed: (1) ServerSecurityUser.getDatabaseUser() returned a DB user with an uninitialized fileAccessMap, which requestAccessOnFile treated as allow-all; (2) ArcadeDBServer.createDatabase() omitted factory.setSecurity(...) so any database created via POST /api/v1/server {"command":"create database X"} had its entire record-level authorization system silently disabled. In combination, record-level and database-level authorization could be bypassed by any authenticated principal. This vulnerability is fixed in 26.4.2.
π@cveNotify
GitHub
fix: enforce per-database access in HTTP command handler Β· ArcadeData/arcadedb@04110c0
ArcadeDB Multi-Model Database, one DBMS that supports SQL, Cypher, Gremlin, HTTP/JSON, MongoDB and Redis. ArcadeDB is a conceptual fork of OrientDB, the first Multi-Model DBMS. ArcadeDB supports Vector Embeddings. - fix: enforce per-database access in HTTPβ¦
π¨ CVE-2026-52746
JSONata is a JSON query and transformation language. Prior to 2.2.0 and 1.8.9, malicious non-matching inputs to the $toMillis function can cause superlinear backtracking in the ISO-8601 validation regex, leading to denial of service in applications that evaluate user-provided JSONata expressions. This issue is fixed in version 2.2.0 and 1.8.9.
π@cveNotify
JSONata is a JSON query and transformation language. Prior to 2.2.0 and 1.8.9, malicious non-matching inputs to the $toMillis function can cause superlinear backtracking in the ISO-8601 validation regex, leading to denial of service in applications that evaluate user-provided JSONata expressions. This issue is fixed in version 2.2.0 and 1.8.9.
π@cveNotify
GitHub
fix $toMillis() with more than 3 digit fractional seconds (#782) Β· jsonata-js/jsonata@80ba95d
The factional part of the date/time seconds was being parsed
and converted to an integer in order to pass to the
milliseconds parameter. However, if there were more than
3 digits, then this would b...
and converted to an integer in order to pass to the
milliseconds parameter. However, if there were more than
3 digits, then this would b...
π¨ CVE-2026-64600
In the Linux kernel, the following vulnerability has been resolved:
xfs: resample the data fork mapping after cycling ILOCK
xfs_reflink_fill_{cow_hole,delalloc} are both presented with an inode,
a data fork mapping, and a cow fork mapping. Unfortunately, these two
helpers cycle the ILOCK to grab a transaction, which means that the
mappings are stale as soon as we reacquire the ILOCK. Currently we
refresh the cow fork mapping by re-calling xfs_find_trim_cow_extent, but
we don't refresh the data fork mapping beforehand, which means that the
xfs_bmap_trim_cow in that function queries the refcount btree about the
wrong physical blocks and returns an inaccurate value in *shared.
If *shared is now false, the directio write proceeds with a stale data
fork mapping. Fix this by querying the data fork mapping if the
sequence counter changes across the ILOCK cycle.
π@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
xfs: resample the data fork mapping after cycling ILOCK
xfs_reflink_fill_{cow_hole,delalloc} are both presented with an inode,
a data fork mapping, and a cow fork mapping. Unfortunately, these two
helpers cycle the ILOCK to grab a transaction, which means that the
mappings are stale as soon as we reacquire the ILOCK. Currently we
refresh the cow fork mapping by re-calling xfs_find_trim_cow_extent, but
we don't refresh the data fork mapping beforehand, which means that the
xfs_bmap_trim_cow in that function queries the refcount btree about the
wrong physical blocks and returns an inaccurate value in *shared.
If *shared is now false, the directio write proceeds with a stale data
fork mapping. Fix this by querying the data fork mapping if the
sequence counter changes across the ILOCK cycle.
π@cveNotify
π¨ CVE-2026-45330
Decidim is a participatory democracy framework. Prior to 0.30.9, from 0.31.0 before 0.31.5, and in 0.32.0.rc1 before 0.32.0.rc2, the identity-document verification admin controllers load pending Authorization records by raw identifier without confirming current_organization ownership, allowing an administrator from one tenant to view, approve, or reject another tenantβs ID-document request. This issue is fixed in versions 0.30.9, 0.31.5, and 0.32.0.rc2.
π@cveNotify
Decidim is a participatory democracy framework. Prior to 0.30.9, from 0.31.0 before 0.31.5, and in 0.32.0.rc1 before 0.32.0.rc2, the identity-document verification admin controllers load pending Authorization records by raw identifier without confirming current_organization ownership, allowing an administrator from one tenant to view, approve, or reject another tenantβs ID-document request. This issue is fixed in versions 0.30.9, 0.31.5, and 0.32.0.rc2.
π@cveNotify
GitHub
Release v0.30.9 Β· decidim/decidim
Release Notes
If you are an implementer or someone that is upgrading a Decidim installation, you need to follow
the instructions for all the patch releases in GitHub:
https://github.com/decidim/de...
If you are an implementer or someone that is upgrading a Decidim installation, you need to follow
the instructions for all the patch releases in GitHub:
https://github.com/decidim/de...
π¨ CVE-2026-54768
WPGraphQL provides a GraphQL API for WordPress sites. From 2.0.0 until 2.15.1, the deprecated user field on SendPasswordResetEmailPayload lets an unauthenticated caller distinguish existing author-class accounts through the sendPasswordResetEmail mutation and obtain public profile fields. This issue is fixed in version 2.15.1.
π@cveNotify
WPGraphQL provides a GraphQL API for WordPress sites. From 2.0.0 until 2.15.1, the deprecated user field on SendPasswordResetEmailPayload lets an unauthenticated caller distinguish existing author-class accounts through the sendPasswordResetEmail mutation and obtain public profile fields. This issue is fixed in version 2.15.1.
π@cveNotify
GitHub
Release wp-graphql: v2.15.1 Β· wp-graphql/wp-graphql
2.15.1 (2026-06-09)
Security
Fixes a user-enumeration issue in the sendPasswordResetEmail mutation. The deprecated SendPasswordResetEmailPayload.user field could reveal whether a username/email be...
Security
Fixes a user-enumeration issue in the sendPasswordResetEmail mutation. The deprecated SendPasswordResetEmailPayload.user field could reveal whether a username/email be...
π¨ CVE-2026-18587
A flaw has been found in Wavlink WL-NU516U1 708c073-mt7628. The impacted element is an unknown function of the component Config Import. Executing a manipulation of the argument Password can lead to os command injection. The attack may be launched remotely. This attack is characterized by high complexity. The exploitability is regarded as difficult. The exploit has been published and may be used. It is advisable to upgrade the affected component. The vendor was contacted early, responded in a very professional manner and quickly released a fixed version of the affected product.
π@cveNotify
A flaw has been found in Wavlink WL-NU516U1 708c073-mt7628. The impacted element is an unknown function of the component Config Import. Executing a manipulation of the argument Password can lead to os command injection. The attack may be launched remotely. This attack is characterized by high complexity. The exploitability is regarded as difficult. The exploit has been published and may be used. It is advisable to upgrade the affected component. The vendor was contacted early, responded in a very professional manner and quickly released a fixed version of the affected product.
π@cveNotify
π¨ CVE-2026-18607
A security vulnerability has been detected in Wavlink WN572, WN570H, WN573, WN529, WN530, WN531, WN535, etc. WN529, WN530, WN531, WN535, WN536, WN551, WN557 and NU516 up to 20260609. Affected by this issue is the function strcpy of the file upload.cgi of the component lighttpd. The manipulation of the argument HTTP_COOKIE leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed publicly and may be used.
π@cveNotify
A security vulnerability has been detected in Wavlink WN572, WN570H, WN573, WN529, WN530, WN531, WN535, etc. WN529, WN530, WN531, WN535, WN536, WN551, WN557 and NU516 up to 20260609. Affected by this issue is the function strcpy of the file upload.cgi of the component lighttpd. The manipulation of the argument HTTP_COOKIE leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed publicly and may be used.
π@cveNotify
GitHub
GitHub - 0xcc12138/WAVLINK-vul: only vuldb can open the rar
only vuldb can open the rar. Contribute to 0xcc12138/WAVLINK-vul development by creating an account on GitHub.
π¨ CVE-2026-69149
Angular is a development platform for building mobile and desktop web applications using TypeScript/JavaScript and other languages. Prior to 20.3.27, 21.2.19, and 22.0.7, a Cross-Site Scripting (XSS) vulnerability exists in @angular/platform-server's DOM emulation dependency (domino) when serializing the content of fallback raw-content elements (<iframe>, <noembed>, <noframes>, and <noscript>). This issue is fixed in versions 20.3.27, 21.2.19, and 22.0.7.
π@cveNotify
Angular is a development platform for building mobile and desktop web applications using TypeScript/JavaScript and other languages. Prior to 20.3.27, 21.2.19, and 22.0.7, a Cross-Site Scripting (XSS) vulnerability exists in @angular/platform-server's DOM emulation dependency (domino) when serializing the content of fallback raw-content elements (<iframe>, <noembed>, <noframes>, and <noscript>). This issue is fixed in versions 20.3.27, 21.2.19, and 22.0.7.
π@cveNotify
GitHub
Pr takeover 69522 by leonsenft Β· Pull Request #69675 Β· angular/angular
Takeover of #69522.
π¨ CVE-2026-69152
The brace-expansion library generates arbitrary strings containing a common prefix and suffix. Prior to 1.1.18, 2.1.4, 3.0.6, and 5.0.9, expand() does not apply maxLength while constructing comma-alternative intermediate arrays or padded sequences, allowing attacker-controlled input to exhaust memory or block the event loop. The fix for CVE-2026-14257 is bypassed by the vulnerability. This issue is fixed in versions 1.1.18, 2.1.4, 3.0.6, and 5.0.9.
π@cveNotify
The brace-expansion library generates arbitrary strings containing a common prefix and suffix. Prior to 1.1.18, 2.1.4, 3.0.6, and 5.0.9, expand() does not apply maxLength while constructing comma-alternative intermediate arrays or padded sequences, allowing attacker-controlled input to exhaust memory or block the event loop. The fix for CVE-2026-14257 is bypassed by the vulnerability. This issue is fixed in versions 1.1.18, 2.1.4, 3.0.6, and 5.0.9.
π@cveNotify
GitHub
fix: backport GHSA-mh99-v99m-4gvg to v3 (#136) Β· juliangruber/brace-expansion@139d015
* fix: backport GHSA-mh99-v99m-4gvg
* fix: mirror the canonical implementation, document max and maxLength
* fix: pin the {a},b} empty-drop conformance change, document the Infinity max default
* fix: mirror the canonical implementation, document max and maxLength
* fix: pin the {a},b} empty-drop conformance change, document the Infinity max default
π¨ CVE-2026-18612
A flaw has been found in GL-iNet GL-MT3000 up to 4.4.5. This vulnerability affects the function plugins.remove_package/plugins.install_package of the file /cgi-bin/glc of the component plugins.so Native Plugin. This manipulation causes command injection. The attack can be initiated remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure and confirmed the existence of the vulnerability.
π@cveNotify
A flaw has been found in GL-iNet GL-MT3000 up to 4.4.5. This vulnerability affects the function plugins.remove_package/plugins.install_package of the file /cgi-bin/glc of the component plugins.so Native Plugin. This manipulation causes command injection. The attack can be initiated remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure and confirmed the existence of the vulnerability.
π@cveNotify
GitHub
iot_vul/GL-iNet/MT3000/4.4.5/plugins_package_name_glc_rce/CVE.md at main Β· StrTzz123/iot_vul
Contribute to StrTzz123/iot_vul development by creating an account on GitHub.
π¨ CVE-2026-40717
Dell Monitor driver, version 1.0.0.0, contains an Improper Link Resolution Before File Access ('Link Following') vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Elevation of Privileges.
π@cveNotify
Dell Monitor driver, version 1.0.0.0, contains an Improper Link Resolution Before File Access ('Link Following') vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Elevation of Privileges.
π@cveNotify
π¨ CVE-2026-18615
A vulnerability was determined in GL-iNet GL-MT3000 up to 4.4.5. The affected element is the function wg-server.generate_publickey of the file /cgi-bin/glc of the component wg-server.so Native Plugin. Executing a manipulation of the argument private_key can lead to command injection. The attack may be launched remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure and confirmed the existence of the vulnerability.
π@cveNotify
A vulnerability was determined in GL-iNet GL-MT3000 up to 4.4.5. The affected element is the function wg-server.generate_publickey of the file /cgi-bin/glc of the component wg-server.so Native Plugin. Executing a manipulation of the argument private_key can lead to command injection. The attack may be launched remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure and confirmed the existence of the vulnerability.
π@cveNotify
GitHub
iot_vul/GL-iNet/MT3000/4.4.5/wg_generate_publickey_glc/CVE.md at main Β· StrTzz123/iot_vul
Contribute to StrTzz123/iot_vul development by creating an account on GitHub.
π¨ CVE-2026-59913
Dell Display and Peripheral Manager (DDPM Mac), versions prior to 2.3.0.1005, contain a Missing Authentication for Critical Function vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Elevation of privileges.
π@cveNotify
Dell Display and Peripheral Manager (DDPM Mac), versions prior to 2.3.0.1005, contain a Missing Authentication for Critical Function vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Elevation of privileges.
π@cveNotify
π¨ CVE-2026-18644
A vulnerability was identified in danpros HTMLy up to 3.1.1. Affected by this issue is the function unlink of the file /system/htmly.php of the component Delete Username Endpoint. Such manipulation of the argument File leads to path traversal. The attack can be launched remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.
π@cveNotify
A vulnerability was identified in danpros HTMLy up to 3.1.1. Affected by this issue is the function unlink of the file /system/htmly.php of the component Delete Username Endpoint. Such manipulation of the argument File leads to path traversal. The attack can be launched remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.
π@cveNotify
GitHub
danpros htmly v3.1.1 /system/htmly.php Arbitrary File Deletion (CWE-22) Β· Issue #5 Β· orionyan520/cve_report
danpros htmly v3.1.1 /system/htmly.php Arbitrary File Deletion (CWE-22) NAME OF AFFECTED PRODUCT(S) htmly β Databaseless Blogging Platform (Flat-File CMS) Vendor Homepage https://www.htmly.com AFFE...
π¨ CVE-2026-69185
Socket.IO enables bidirectional and low-latency communication for every platform. Prior to 4.2.7, 3.4.5, and 3.3.6, a specially crafted Socket.IO packet can make the server wait for a large number of binary attachments and buffer them, which can be exploited to make the server run out of memory. This vulnerability is fixed in 4.2.7, 3.4.5, and 3.3.6.
π@cveNotify
Socket.IO enables bidirectional and low-latency communication for every platform. Prior to 4.2.7, 3.4.5, and 3.3.6, a specially crafted Socket.IO packet can make the server wait for a large number of binary attachments and buffer them, which can be exploited to make the server run out of memory. This vulnerability is fixed in 4.2.7, 3.4.5, and 3.3.6.
π@cveNotify
GitHub
fix(parser): reject binary packets with zero attachments Β· socketio/socket.io@7c6ef57
Binary packets with an attachment count of 0 are invalid, since packets
without binary attachments should be encoded as regular EVENT or ACK
packets. They are now properly rejected.
This is a foll...
without binary attachments should be encoded as regular EVENT or ACK
packets. They are now properly rejected.
This is a foll...
π¨ CVE-2026-18645
A security flaw has been discovered in danpros HTMLy up to 3.1.1. This affects the function add_content of the file /system/admin/admin.php of the component Admin Content Endpoint. Performing a manipulation of the argument oldfile results in path traversal. The attack may be initiated remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.
π@cveNotify
A security flaw has been discovered in danpros HTMLy up to 3.1.1. This affects the function add_content of the file /system/admin/admin.php of the component Admin Content Endpoint. Performing a manipulation of the argument oldfile results in path traversal. The attack may be initiated remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.
π@cveNotify
GitHub
danpros htmly v3.1.1 /system/admin/admin.php Arbitrary File Move via rename() (CWE-22) Β· Issue #6 Β· orionyan520/cve_report
danpros htmly v3.1.1 /system/admin/admin.php Arbitrary File Move via rename() (CWE-22) NAME OF AFFECTED PRODUCT(S) htmly β Databaseless Blogging Platform (Flat-File CMS) Vendor Homepage https://www...
π¨ CVE-2026-18646
A weakness has been identified in danpros HTMLy up to 3.1.1. This vulnerability affects unknown code of the file /system/htmly.php of the component Author Name Handler. Executing a manipulation of the argument Name can lead to path traversal. The attack may be launched remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.
π@cveNotify
A weakness has been identified in danpros HTMLy up to 3.1.1. This vulnerability affects unknown code of the file /system/htmly.php of the component Author Name Handler. Executing a manipulation of the argument Name can lead to path traversal. The attack may be launched remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.
π@cveNotify
GitHub
danpros htmly v3.1.1 /system/htmly.php Path Traversal in /author/:name (CWE-22) Β· Issue #7 Β· orionyan520/cve_report
danpros htmly v3.1.1 /system/htmly.php Path Traversal in /author/:name (CWE-22) NAME OF AFFECTED PRODUCT(S) htmly β Databaseless Blogging Platform (Flat-File CMS) Vendor Homepage https://www.htmly....
π¨ CVE-2026-18647
A security vulnerability has been detected in jina-ai reader up to 1574bfd380d249c86c82db4dace0d9c8fe17e2b1. This issue affects the function isValidTLD of the file /backend/functions/src/cloud-functions/crawler.ts of the component Crawler/Puppeteer. The manipulation leads to server-side request forgery. Remote exploitation of the attack is possible. The exploit has been disclosed publicly and may be used. This product follows a rolling release approach for continuous delivery, so version details for affected or updated releases are not provided. The vendor was contacted early about this disclosure but did not respond in any way.
π@cveNotify
A security vulnerability has been detected in jina-ai reader up to 1574bfd380d249c86c82db4dace0d9c8fe17e2b1. This issue affects the function isValidTLD of the file /backend/functions/src/cloud-functions/crawler.ts of the component Crawler/Puppeteer. The manipulation leads to server-side request forgery. Remote exploitation of the attack is possible. The exploit has been disclosed publicly and may be used. This product follows a rolling release approach for continuous delivery, so version details for affected or updated releases are not provided. The vendor was contacted early about this disclosure but did not respond in any way.
π@cveNotify
GitHub
jina-ai reader /backend/functions/src/cloud-functions/crawler.ts Server-Side Request Forgery Β· Issue #8 Β· orionyan520/cve_report
jina-ai reader /backend/functions/src/cloud-functions/crawler.ts Server-Side Request Forgery NAME OF AFFECTED PRODUCT(S) Reader (Jina AI) Vendor Homepage https://github.com/jina-ai/reader AFFECTED ...