🚨 CVE-2026-21548
In nr modem, there is a possible improper input validation. This could lead to remote denial of service with System execution privileges needed.

🎖@cveNotify

🚨 CVE-2026-21549
In modem, there is a possible improper input validation. This could lead to remote denial of service with no additional execution privileges needed

🎖@cveNotify

🚨 CVE-2026-21550
In modem, there is a possible improper input validation. This could lead to remote denial of service with no additional execution privileges needed

🎖@cveNotify

🚨 CVE-2026-21551
In modem, there is a possible improper input validation. This could lead to remote denial of service with no additional execution privileges needed

🎖@cveNotify

🚨 CVE-2026-21552
In modem, there is a possible improper input validation. This could lead to remote denial of service with no additional execution privileges needed

🎖@cveNotify

🚨 CVE-2026-21553
In modem, there is a possible improper input validation. This could lead to remote denial of service with no additional execution privileges needed

🎖@cveNotify

🚨 CVE-2026-21555
In modem, there is a possible improper input validation. This could lead to remote denial of service with no additional execution privileges needed

🎖@cveNotify

🚨 CVE-2026-28147
Missing Authorization vulnerability in Unlimited Elements Unlimited Elements For Elementor (Free Widgets, Addons, Templates) allows Exploiting Incorrectly Configured Access Control Security Levels.

This issue affects Unlimited Elements For Elementor (Free Widgets, Addons, Templates): from n/a through 2.0.15.

🎖@cveNotify

🚨 CVE-2026-8793
PaperCut NG/MF does not properly restrict excessive authentication attempts within its login component. An unauthenticated remote attacker can exploit this vulnerability to perform unrestricted brute-force or credential-stuffing attacks without triggering account lockout or rate-limiting mechanisms in some configurations.

🎖@cveNotify

🚨 CVE-2026-8794
PaperCut NG/MF contains an observable timing discrepancy in its authentication component. An unauthenticated remote attacker can exploit this vulnerability to perform username enumeration by measuring response times during login attempts. The system executes a password hash comparison only when a valid account is supplied, creating a measurable timing oracle that reveals account existence.

🎖@cveNotify

🚨 CVE-2026-12185
In Bouncy Castle for Java before 1.85, BKS/UBER keystore allocates from untrusted lengths before integrity check. This issue also affects Bouncy Castle for Java LTS before 2.73.12.

🎖@cveNotify

🚨 CVE-2026-8763
In Bouncy Castle for Java before 1.85, Name Constraints bypass via trailing dot in rfc822Name and URI. This issue also affects Bouncy Castle for Java LTS before 2.73.12, and Bouncy Castle for Java FIPS (BC-FJA) before bc-fips 1.0.2.7 (1.0.X series), 2.0.2 (2.0.X series) and 2.1.3 (2.1.X series).

🎖@cveNotify

🚨 CVE-2026-60011
Sharp and Toshiba Tec MFPs (multifunction printers) fail to properly authorize requests to directly access certain image data stored to the affected product.

🎖@cveNotify

🚨 CVE-2026-62416
Network Scanner Tool and Network Scanner Tool Lite provided by Sharp Corporation, with the initial configuration, require no authentication and accept files unlimitedly. When the affected products are used with the initial configuration, anyone can connect to them without authentication and upload files unlimitedly. This may cause a denial-of-service (DoS) condition on the PC. Furthermore, if a malicious file is uploaded, a PC user may be tricked to execute the file to attack other entities from that PC.

🎖@cveNotify

🚨 CVE-2026-63545
Sharp and Toshiba Tec MFPs (multifunction printers) caches data internally when printing, and leave them uncleared. They may be accessed later by other users.

🎖@cveNotify

🚨 CVE-2026-63563
Sharp and Toshiba Tec MFPs (multifunction printers) for a certain market have been shipped with the user authentication feature disabled in the initial configuration. When used with the initial configuration, the address book editing and a range of features related to Document Filing can be accessed without user authentication.
Products intended for the Japanese market are not affected.

🎖@cveNotify

🚨 CVE-2026-69075
FlowIntel is affected by a stored cross-site scripting vulnerability through multiple user-controlled or administrator-controlled fields.

Persisted values—including case titles, ticket identifiers, recurring-case information, user profile attributes, organisation names, and role names—were rendered inside DOM elements subsequently compiled by Vue. Although normal HTML escaping could neutralize direct HTML markup, it did not prevent an attacker from injecting Vue interpolation expressions using the configured [[ ... ]] delimiters.

An authenticated attacker able to modify one of the affected fields could store a malicious Vue expression. When another user viewed an affected case, report, profile, recurring-case page, or navigation component, Vue could evaluate the injected expression in the context of the FlowIntel application.

Successful exploitation could allow arbitrary JavaScript execution in the victim’s browser under the FlowIntel origin. This could expose information available to the victim, perform actions using the victim’s authenticated session, or modify application data within the victim’s privileges.

The patch introduces a dedicated vue_escape filter that escapes HTML-sensitive characters and breaks Vue interpolation delimiters before the values are rendered. The filter is applied to the affected case, account, organisation, role, configuration, and navigation fields.

🎖@cveNotify

🚨 CVE-2024-42088
In the Linux kernel, the following vulnerability has been resolved:

ASoC: mediatek: mt8195: Add platform entry for ETDM1_OUT_BE dai link

Commit e70b8dd26711 ("ASoC: mediatek: mt8195: Remove afe-dai component
and rework codec link") removed the codec entry for the ETDM1_OUT_BE
dai link entirely instead of replacing it with COMP_EMPTY(). This worked
by accident as the remaining COMP_EMPTY() platform entry became the codec
entry, and the platform entry became completely empty, effectively the
same as COMP_DUMMY() since snd_soc_fill_dummy_dai() doesn't do anything
for platform entries.

This causes a KASAN out-of-bounds warning in mtk_soundcard_common_probe()
in sound/soc/mediatek/common/mtk-soundcard-driver.c:

for_each_card_prelinks(card, i, dai_link) {
if (adsp_node && !strncmp(dai_link->name, "AFE_SOF", strlen("AFE_SOF")))
dai_link->platforms->of_node = adsp_node;
else if (!dai_link->platforms->name && !dai_link->platforms->of_node)
dai_link->platforms->of_node = platform_node;
}

where the code expects the platforms array to have space for at least one entry.

Add an COMP_EMPTY() entry so that dai_link->platforms has space.

🎖@cveNotify

🚨 CVE-2025-38299
In the Linux kernel, the following vulnerability has been resolved:

ASoC: mediatek: mt8195: Set ETDM1/2 IN/OUT to COMP_DUMMY()

ETDM2_IN_BE and ETDM1_OUT_BE are defined as COMP_EMPTY(),
in the case the codec dai_name will be null.

Avoid a crash if the device tree is not assigning a codec
to these links.

[ 1.179936] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[ 1.181065] Mem abort info:
[ 1.181420] ESR = 0x0000000096000004
[ 1.181892] EC = 0x25: DABT (current EL), IL = 32 bits
[ 1.182576] SET = 0, FnV = 0
[ 1.182964] EA = 0, S1PTW = 0
[ 1.183367] FSC = 0x04: level 0 translation fault
[ 1.183983] Data abort info:
[ 1.184406] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
[ 1.185097] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 1.185766] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 1.186439] [0000000000000000] user address but active_mm is swapper
[ 1.187239] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
[ 1.188029] Modules linked in:
[ 1.188420] CPU: 7 UID: 0 PID: 70 Comm: kworker/u32:1 Not tainted 6.14.0-rc4-next-20250226+ #85
[ 1.189515] Hardware name: Radxa NIO 12L (DT)
[ 1.190065] Workqueue: events_unbound deferred_probe_work_func
[ 1.190808] pstate: 40400009 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 1.191683] pc : __pi_strcmp+0x24/0x140
[ 1.192170] lr : mt8195_mt6359_soc_card_probe+0x224/0x7b0
[ 1.192854] sp : ffff800083473970
[ 1.193271] x29: ffff800083473a10 x28: 0000000000001008 x27: 0000000000000002
[ 1.194168] x26: ffff800082408960 x25: ffff800082417db0 x24: ffff800082417d88
[ 1.195065] x23: 000000000000001e x22: ffff800082dbf480 x21: ffff800082dc07b8
[ 1.195961] x20: 0000000000000000 x19: 0000000000000013 x18: 00000000ffffffff
[ 1.196858] x17: 000000040044ffff x16: 005000f2b5503510 x15: 0000000000000006
[ 1.197755] x14: ffff800082407af0 x13: 6e6f69737265766e x12: 692d6b636f6c6374
[ 1.198651] x11: 0000000000000002 x10: ffff80008240b920 x9 : 0000000000000018
[ 1.199547] x8 : 0101010101010101 x7 : 0000000000000000 x6 : 0000000000000000
[ 1.200443] x5 : 0000000000000000 x4 : 8080808080000000 x3 : 303933383978616d
[ 1.201339] x2 : 0000000000000000 x1 : ffff80008240b920 x0 : 0000000000000000
[ 1.202236] Call trace:
[ 1.202545] __pi_strcmp+0x24/0x140 (P)
[ 1.203029] mtk_soundcard_common_probe+0x3bc/0x5b8
[ 1.203644] platform_probe+0x70/0xe8
[ 1.204106] really_probe+0xc8/0x3a0
[ 1.204556] __driver_probe_device+0x84/0x160
[ 1.205104] driver_probe_device+0x44/0x130
[ 1.205630] __device_attach_driver+0xc4/0x170
[ 1.206189] bus_for_each_drv+0x8c/0xf8
[ 1.206672] __device_attach+0xa8/0x1c8
[ 1.207155] device_initial_probe+0x1c/0x30
[ 1.207681] bus_probe_device+0xb0/0xc0
[ 1.208165] deferred_probe_work_func+0xa4/0x100
[ 1.208747] process_one_work+0x158/0x3e0
[ 1.209254] worker_thread+0x2c4/0x3e8
[ 1.209727] kthread+0x134/0x1f0
[ 1.210136] ret_from_fork+0x10/0x20
[ 1.210589] Code: 54000401 b50002c6 d503201f f86a6803 (f8408402)
[ 1.211355] ---[ end trace 0000000000000000 ]---

🎖@cveNotify

🚨 CVE-2025-38525
In the Linux kernel, the following vulnerability has been resolved:

rxrpc: Fix irq-disabled in local_bh_enable()

The rxrpc_assess_MTU_size() function calls down into the IP layer to find
out the MTU size for a route. When accepting an incoming call, this is
called from rxrpc_new_incoming_call() which holds interrupts disabled
across the code that calls down to it. Unfortunately, the IP layer uses
local_bh_enable() which, config dependent, throws a warning if IRQs are
enabled:

WARNING: CPU: 1 PID: 5544 at kernel/softirq.c:387 __local_bh_enable_ip+0x43/0xd0
...
RIP: 0010:__local_bh_enable_ip+0x43/0xd0
...
Call Trace:
<TASK>
rt_cache_route+0x7e/0xa0
rt_set_nexthop.isra.0+0x3b3/0x3f0
__mkroute_output+0x43a/0x460
ip_route_output_key_hash+0xf7/0x140
ip_route_output_flow+0x1b/0x90
rxrpc_assess_MTU_size.isra.0+0x2a0/0x590
rxrpc_new_incoming_peer+0x46/0x120
rxrpc_alloc_incoming_call+0x1b1/0x400
rxrpc_new_incoming_call+0x1da/0x5e0
rxrpc_input_packet+0x827/0x900
rxrpc_io_thread+0x403/0xb60
kthread+0x2f7/0x310
ret_from_fork+0x2a/0x230
ret_from_fork_asm+0x1a/0x30
...
hardirqs last enabled at (23): _raw_spin_unlock_irq+0x24/0x50
hardirqs last disabled at (24): _raw_read_lock_irq+0x17/0x70
softirqs last enabled at (0): copy_process+0xc61/0x2730
softirqs last disabled at (25): rt_add_uncached_list+0x3c/0x90

Fix this by moving the call to rxrpc_assess_MTU_size() out of
rxrpc_init_peer() and further up the stack where it can be done without
interrupts disabled.

It shouldn't be a problem for rxrpc_new_incoming_call() to do it after the
locks are dropped as pmtud is going to be performed by the I/O thread - and
we're in the I/O thread at this point.

🎖@cveNotify

🚨 CVE-2025-39901
In the Linux kernel, the following vulnerability has been resolved:

i40e: remove read access to debugfs files

The 'command' and 'netdev_ops' debugfs files are a legacy debugging
interface supported by the i40e driver since its early days by commit
02e9c290814c ("i40e: debugfs interface").

Both of these debugfs files provide a read handler which is mostly useless,
and which is implemented with questionable logic. They both use a static
256 byte buffer which is initialized to the empty string. In the case of
the 'command' file this buffer is literally never used and simply wastes
space. In the case of the 'netdev_ops' file, the last command written is
saved here.

On read, the files contents are presented as the name of the device
followed by a colon and then the contents of their respective static
buffer. For 'command' this will always be "<device>: ". For 'netdev_ops',
this will be "<device>: <last command written>". But note the buffer is
shared between all devices operated by this module. At best, it is mostly
meaningless information, and at worse it could be accessed simultaneously
as there doesn't appear to be any locking mechanism.

We have also recently received multiple reports for both read functions
about their use of snprintf and potential overflow that could result in
reading arbitrary kernel memory. For the 'command' file, this is definitely
impossible, since the static buffer is always zero and never written to.
For the 'netdev_ops' file, it does appear to be possible, if the user
carefully crafts the command input, it will be copied into the buffer,
which could be large enough to cause snprintf to truncate, which then
causes the copy_to_user to read beyond the length of the buffer allocated
by kzalloc.

A minimal fix would be to replace snprintf() with scnprintf() which would
cap the return to the number of bytes written, preventing an overflow. A
more involved fix would be to drop the mostly useless static buffers,
saving 512 bytes and modifying the read functions to stop needing those as
input.

Instead, lets just completely drop the read access to these files. These
are debug interfaces exposed as part of debugfs, and I don't believe that
dropping read access will break any script, as the provided output is
pretty useless. You can find the netdev name through other more standard
interfaces, and the 'netdev_ops' interface can easily result in garbage if
you issue simultaneous writes to multiple devices at once.

In order to properly remove the i40e_dbg_netdev_ops_buf, we need to
refactor its write function to avoid using the static buffer. Instead, use
the same logic as the i40e_dbg_command_write, with an allocated buffer.
Update the code to use this instead of the static buffer, and ensure we
free the buffer on exit. This fixes simultaneous writes to 'netdev_ops' on
multiple devices, and allows us to remove the now unused static buffer
along with removing the read access.

🎖@cveNotify