🚨 CVE-2026-28814
Arbitrary Wiki Markup rendering due to lack of authentication in Apache JSPWiki up to 2.12.3 allows attacker to obtain sensitive data stored in JSPWiki variables.
Users are recommended to upgrade to version 2.12.4 or 3.0.0, which fixes this issue.

🎖@cveNotify

🚨 CVE-2026-44613
Cross-Site Request Forgery (CSRF) vulnerability in Apache Zeppelin. The default CORS configuration allowed cross-origin state-changing requests and accepted text/plain request bodies, allowing an attacker who lures an authenticated user to a                   malicious site to perform actions on the user's behalf through REST and WebSocket endpoints. This issue affects Apache Zeppelin versions 0.6.0 through 0.12.0. Users are recommended to upgrade to version 0.12.1, which fixes this issue.

🎖@cveNotify

🚨 CVE-2026-44616
LDAP injection vulnerability in Apache Zeppelin. ActiveDirectoryGroupRealm constructed LDAP search filters without escaping user-controlled input, allowing an authenticated attacker to inject LDAP filter syntax through the user-search endpoint                   and potentially expose directory information. The role-lookup path was also affected after successful LDAP authentication. This issue affects Apache Zeppelin versions 0.6.0 through 0.12.0. Users are recommended to upgrade to version 0.12.1, which                   fixes this issue.

🎖@cveNotify

🚨 CVE-2026-44617
LDAP filter injection vulnerability in Apache Zeppelin. LdapRealm used RFC 4514 distinguished-name escaping when constructing LDAP search filters instead of RFC 4515 filter escaping, leaving special filter characters insufficiently escaped.                   This is an incomplete fix of CVE-2024-31867. This issue affects Apache Zeppelin versions 0.11.1, 0.11.2, and 0.12.0. Users are recommended to upgrade to version 0.12.1, which fixes this issue.

🎖@cveNotify

🚨 CVE-2026-52680
Apache Kyuubi REST batch multipart upload handling uses the client-supplied multipart filename when creating a temporary uploaded resource. A remote attacker who can access the REST batch upload endpoint can provide path traversal sequences in the filename and cause the Kyuubi server process to write controlled content outside the intended upload directory, subject to filesystem permissions.


This issue affects Apache Kyuubi: from 1.7.0 through 1.11.1.

Users are recommended to upgrade to version 1.12.0, which fixes the issue.

🎖@cveNotify

🚨 CVE-2026-15969
SGLang contains an unauthenticated RCE in /load_lora_adapter_from_tensors via bypass of SafeUnpickler’s incomplete denylist, allowing arbitrary command execution through crafted base64-encoded pickle payloads.

🎖@cveNotify

🚨 CVE-2026-35847
An issue in dnsmgr v.2.15 and before allows a local attacker to execute arbitrary code via the ping function of the CheckUils.php file

🎖@cveNotify

🚨 CVE-2026-12251
The Ultimate Member WordPress plugin before 2.12.1 does not filter administrator-level capabilities from the roles it makes selectable on its registration forms, and its post-registration safeguard against elevated accounts is disabled by default, allowing unauthenticated users to register with a site-defined role that carries administrator capabilities and gain administrative access, when such a role exists and a role-selection field is present on a published registration form.

🎖@cveNotify

🚨 CVE-2026-12376
The Academy LMS WordPress plugin through 3.8.2 does not restrict access to quiz attempt records to their owner, allowing any authenticated user with subscriber-level access and above (enrolled in any single course) to read every user's quiz attempts across the whole site, including personal data such as IP addresses, names, registration dates and quiz results.

🎖@cveNotify

🚨 CVE-2026-12695
The miniOrange 2FA WordPress plugin before 6.2.6 does not validate the submitted one-time password against the targeted user's stored secret, instead verifying it against an attacker-supplied value, allowing an unauthenticated attacker who knows a victim's password to bypass two-factor authentication and gain access to the victim's account, including administrators.

🎖@cveNotify

🚨 CVE-2026-12720
The Kirki WordPress plugin before 6.0.13 does not restrict which classes may be instantiated when it deserialises data that unauthenticated users can store, leading to PHP Object Injection that is triggered when an administrator later reviews the stored data. With a suitable gadget chain present on the site (via another installed Kirki WordPress plugin before 6.0.13, , or an outdated WordPress version), this could be leveraged to perform a variety of attacks, such as remote code execution.

🎖@cveNotify

🚨 CVE-2026-13393
The ElementsKit Elementor Addons WordPress plugin before 3.10.01 does not sanitize or escape certain megamenu menu-item settings before storing them and outputting them on the front end, and does not require the unfiltered_html capability to save them, allowing users with administrative capabilities to store malicious JavaScript; on a multisite network this lets a non-super subsite Administrator, who is denied unfiltered_html, plant a stored Cross-Site Scripting payload that executes in the sessions of the network Super Admin and site visitors.

🎖@cveNotify

🚨 CVE-2026-15381
The WP Go Maps WordPress plugin before 10.1.04 does not properly sanitise and escape a parameter before using it in a SQL query, allowing unauthenticated users to perform SQL injection attacks.

🎖@cveNotify

🚨 CVE-2026-8155
The BuddyPress WordPress plugin before 14.5.0 does not properly enforce authorization on its private messaging endpoints, allowing any authenticated user (Subscriber+) to read, modify, or delete other users' private messages.

🎖@cveNotify

🚨 CVE-2026-10685
The Zephyr Bluetooth GATT client CCC-write response handler gatt_write_ccc_rsp() in subsys/bluetooth/host/gatt.c invoked the application's params->subscribe() callback after it had already called params->notify(conn, params, NULL, 0).

Per the public GATT API, a notify callback with NULL data is the documented signal that the subscription has terminated and the bt_gatt_subscribe_params struct may be freed or reused by the application; calling subscribe() on the struct afterwards is a use-after-free, including an indirect call through the freed params->subscribe function pointer.

The error branch is remotely (adjacent) reachable: a Zephyr device acting as a GATT client that calls bt_gatt_subscribe() can be driven into this ordering when a connected GATT server peer answers the CCC write with an ATT Error Response (the peer-supplied error code flows through att_error_rsp -> att_handle_rsp into gatt_write_ccc_rsp).

For applications that free or recycle subscription parameters in their notification-termination handler, this results in memory corruption, a crash (denial of service), or potentially attacker-influenced control flow. The fix reorders the handler so the subscribe() callback runs before the terminating notify(NULL) in both the error and unsubscribe paths.

🎖@cveNotify

🚨 CVE-2026-18446
fast-uri before 4.1.2, 3.1.5, and 2.4.4 requires a literal double forward slash to recognize a URI authority, so a reference that uses a backslash based introducer in place of it (backslash backslash, forward slash backslash, or backslash forward slash) is parsed with no authority and folds into the path. Node's native WHATWG URL parser instead treats a backslash as interchangeable with a forward slash for special schemes, so the two parsers extract different hosts from the same input. Applications that use fast-uri to enforce host based policy such as allowlists, SSRF filtering, or redirect validation before passing the same URL into Node's URL or fetch consumers can be steered to an unintended host. Upgrade to fast-uri 4.1.2, 3.1.5, or 2.4.4.

🎖@cveNotify

🚨 CVE-2025-62347
HCL iControl was affected by Improper Input Validation vulnerability. It is vulnerable to unexpected system behavior and potential security bypasses. This was caused by an implementation flaw in an architectural security tactic that fails to properly validate whether the received input matches the expected type.

🎖@cveNotify

🚨 CVE-2026-10686
Zephyr's IPv6 forwarding path re-sent routed unicast packets without ever decrementing the IPv6 hop limit. Both routing branches of ipv6_route_packet() (subsys/net/ip) were affected: the explicit-route path (net_route_packet()) and the on-link cross-interface path (net_route_packet_if()). Each set the packet forwarding flag and called net_send_data() with the hop limit untouched and no expiry check.

Per RFC 8200 the hop-limit decrement is the mechanism that bounds packet lifetime and terminates routing loops; without it, a device acting as an IPv6 router relays looping packets indefinitely. An on-path attacker who can induce or exploit a transient L3 loop turns it into a permanent forwarding storm, causing CPU/bandwidth resource exhaustion (availability DoS) on the forwarder and adjacent links; path-discovery and loop diagnostics that rely on hop-limit expiry are also defeated.

Affected configurations. In every affected release the forwarding path is reached via CONFIG_NET_ROUTE (enabled by default when CONFIG_NET_IPV6_NBR_CACHE is set), together with CONFIG_NET_ROUTING for cross-interface routing. Note that CONFIG_NET_IPV6_FORWARDING and CONFIG_NET_IPV4_FORWARDING — which appear in the fix and in this advisory's evidence notes — were introduced after v4.4.0, when the routing options were split and renamed; they do not exist in any affected release. When auditing a v4.4.1-or-earlier configuration, look for CONFIG_NET_ROUTE and CONFIG_NET_ROUTING.

IPv4 is not affected in any release. The IPv4 forwarding path (net_route_ipv4_packet() in route_ipv4.c) was added after v4.4.0 and has never shipped in a release. Its TTL decrement and IPv4 header-checksum recomputation landed on main as part of the same fix, so the evidence notes below discuss it, but no released version is reachable by way of IPv4.

Affected releases are v1.8.0 through v4.4.1: v1.8.0 introduced net_route_packet() and v2.2.0 added net_route_packet_if(), and neither decremented the hop limit. v4.3.1 carries the explicit-route fix but not the on-link one, so it is affected as well. Fixed on main by 7d8f1afa7345 (explicit-route path) and 589eadc74efa (on-link path).

🎖@cveNotify

🚨 CVE-2026-17346
The fix for CVE-2026-12044 in pgAdmin 4 9.16 hardened qtLiteral and switched sixteen COMMENT ON / pgstattuple / pgstatindex templates to it, but missed several sinks that had been placed in test_sql_string_literal_lint.py's ALLOWLIST on the incorrect assumption that schema, table, publication, and subscription names sourced from pg_catalog via the browser tree could never contain an apostrophe. PostgreSQL permits arbitrary characters in quoted identifiers, so a low-privileged user able to CREATE TABLE, CREATE PUBLICATION, or CREATE SUBSCRIPTION can plant an apostrophe'd object name that breaks out of the unescaped '{{ name }}' template interpolation the moment any user (including a higher-privileged one) opens that object's Statistics or Dependencies tab, allowing arbitrary SQL statement injection in the viewing user's database session.

Affected sinks: the Index Statistics query for all-indexes listing (coll_stats.sql, both the 16_plus and default PostgreSQL-version template variants -- distinct from the single-index stats.sql path already fixed in CVE-2026-12044), and the publication and subscription dependencies.sql / get_position.sql templates (both the pg and ppas/EPAS dialect variants for publications).

Fix switches all of these templates to qtLiteral(conn) for name interpolation, and updates publications/__init__.py and subscriptions/__init__.py to pass conn=self.conn into the dependencies.sql render_template call so the qtLiteral filter has a connection to quote against. The corresponding ALLOWLIST entries in test_sql_string_literal_lint.py are removed now that these sinks are properly escaped rather than merely assumed safe. A behavioral regression test renders each fixed template with a stacked-statement apostrophe payload and asserts both that the object name appears exactly as qtLiteral-escaped and that the rendered SQL parses as exactly one statement, verifying the assertion genuinely fails against the pre-patch raw-interpolation form.

This issue affects pgAdmin 4: the Index Statistics sink from 1.0, and the Publications/Subscriptions sinks from 5.0, both before 9.17.

🎖@cveNotify

🚨 CVE-2026-17348
In SERVER mode, pgAdmin 4 enforces authentication per route via the @pga_login_required decorator; the application's before_request hook only handles desktop-mode auto-login and the Kerberos/Webserver-auth redirect, so any route shipped without the decorator is reachable without authentication (CWE-306). This is the same defect class previously fixed as CVE-2026-12046 (the sqleditor close/update_connection routes).

A follow-up sweep, prompted by a report describing an incomplete fix for CVE-2026-12046, found further routes missing @pga_login_required: the Constraints blueprint's nodes and proplist (object listing) routes and its delete route (a state-mutating DELETE that removes table constraints); preferences.get_all_cli (GET, discloses all CLI-settable preference values); debugger.close (DELETE); and schema_diff.close (DELETE). An unauthenticated network client could therefore enumerate constraint metadata, delete table constraints, read preference values, and force-close debugger or schema-diff sessions belonging to other users, without ever authenticating.

Fix adds the missing @pga_login_required decorator (and the corresponding import to the Constraints module) to each of these routes. The change is decorator-only; no behavioral changes to the underlying handlers.

This issue affects pgAdmin 4 in SERVER mode: the Constraints and Debugger routes from 1.0, the Schema Diff close route from 4.18, and preferences.get_all_cli from 8.2, all before 9.17.

🎖@cveNotify

🚨 CVE-2026-17349
/misc/workspace/adhoc_connect_server, part of the Workspaces feature introduced in pgAdmin 4 9.0, when passed the id of an existing server, clones that server via Server.clone(), which copies every column from the source row, including user_id, shared, shared_username, and the stored credential fields password, save_password, and tunnel_password. When a non-owner triggered an adhoc connect against another user's (in practice, typically an administrator's) shared server, the clone inherited that user's ownership, shared flag, and stored database credentials verbatim. pgAdmin persisted this cross-tenant, credential-bearing server row before the connection was even attempted, so it survived even when the connection subsequently failed. The non-owner could then open the newly-owned clone and pgAdmin would connect using the source user's stored database password on the non-owner's behalf, granting the non-owner use of database credentials -- and whatever database privileges they confer -- that were never their own.

Fix forces the cloned adhoc record's ownership fields (user_id, shared, shared_username) and stored credential fields (password, save_password, tunnel_password) to belong to the calling user and be cleared/private before committing, regardless of the source server's ownership, sharing state, or stored credentials. A regression test asserts that an adhoc connect triggered by a non-owner against another user's shared server persists a row owned by the caller, not shared, and without the source's stored credentials.

This issue affects pgAdmin 4: from 9.0 before 9.17.

🎖@cveNotify